Driving lessons. How to get a car and start moving (moving)

Choosing a car for yourself, future drivers become before choosing: what to choose the brand of car, color, body type, as well as with a manual gearbox, or with automatic transmission.

It will depend on personal preferences and material opportunities. After all, cars with the manual transmission will cost an order of magnitude cheaper than the automaton. But not everyone knows how to go to the mechanics.

Why do you need the skill driving a car with a manual box?

Some driving schools provide services such as driving training exclusively on automatic cars. This means that the relevant rights will be issued. That is, then it is not possible to sit behind the steering wheel of the manual transmission without obtaining a new certificate.

There are various situations in life, and sometimes there is an urgent need to drive a car with a manual box. After receiving the rights to do it, you can always transfer to the machine. On the contrary, it will not work.

Buying a car on mechanics is more profitable acquisition. In addition to the lower price of cars, their operation will also be more economical. As a rule, the fuel consumption is smaller, and the repair of some details will also be less expensive.

In a situation where the battery is discharged, you can get out of the position. For example, transfer the wires from another car to recharge. Either the car can start, with the so-called pusher. These options are not suitable if the vehicle with automatic transmission.

Only using a manual box, you can feel complete control over the car. When many manipulations are performed on the machine, this does not happen.

Basics ride on mechanics

Before you know how to learn how to ride the mechanics, it is advisable to understand what you have to deal with:

Pedals.When controlling the vehicle, three pedals are used: gas (extreme right), brake (centered), clutch (located on the left). Unlike automatic transmission, both legs are used here. If the driver, sitting behind the steering wheel of the mechanics, the novice, at first, to do it unusual.
CAT. With the help of a gear shift in the transmission, speeds are switched. On many cars, this selector is equipped with prompts, using which it is easier to figure out which transmission is selected.
Tachometer.Located in the instrument panel, and allows you to determine how much the engine crankshaft makes turns per minute. With it, newcomers are controlled when it is necessary to switch to the next gear.

We understand the transmissions on the manual transmission

Mechanics are different from the machine, which requires constant driver control, that is, independent speed switching. Basically, the TCs have 4 or 5 speeds, and in addition to them rear. To understand the location of each, you need to know their purpose.

Transmission: Instructions for beginners

Whenever movement begins with the squeezing of the clutch pedal, thus, the ability to move to another speed appears. Enter the required transmission is permissible when the clutch is completely squeezed.
When a neutral transmission is elected, when squeezing the gas, the car will not move from the place. When the selector is in this position, it is possible to choose the desired speed, including the rear.
The operating transmission is considered the second. It is convenient to move around the inclined area, as well as carry out ride in traffic jams. The first is usually used for the start of the path, then, accelerating, go to the second. Having gained even greater speed and speed, you can go to the third.
It is more difficult to master inexperienced drivers how to ride on mechanics, on the rear. Using it, acceleration occurs faster than on the first, but still, drive the car often, therefore, very dangerous.

Before leaving the car to the city, you need to navigate well, where which transmission is located. The theory is good, but in this case, practical skills are needed. After all, during the ride to be distracted and look at the selector, choosing the necessary transmission, it is impossible because it is unsafe. First time you can train on a car, inoperative, bring to automatism to inclusion of gears.

Starting

Procedure:

Before, turn the key in the ignition lock, you need to fully squeeze the clutch pedal with the left foot, and right to press the brake, and only then start the motor. The motor is headed, the clutch is squeezed, you can turn on the first gear (before this selector is in a neutral position). So that the car does not stall, you can not let go left with the pedal. When the machine works, from the brake, the foot moves to the gas pedal and at the same time it is necessary to start to remove the foot from the clutch, only smoothly.
To transition to the following speed, it is necessary that the tachometer arrow equates to 3000 turns. If you switch too early, the machine can stumble.

How the transition is performed:

The right foot is removed from the gas, and the left is completely squeezed with the clutch, and at this time the selector is translated into the required position,
The grip must be released, and press the gas pedal,
Further, only the right foot is involved in the management, prior to the next speed or stop.

More experienced drivers usually do not pay attention to the testimony of the tachometer, and focus on the sound of the engine.

If the car does not accelerate and too low speed, then you need to switch to the speed below. And if the revs are too high, then you need to turn on the next speed to not overload the engine.

Stop and Parkovka

To drown out vehicles, you can use two options:

Switching to reduced transmissions, following the brake pedal, it is necessary to squeeze the brake pedal.
Press the clutch and move the selector to a neutral position, then eliminate the foot from the clutch and approve, if necessary, the brake.

To wear the box to be less better to use the second way, and not forget besides the brakes necessarily squeeze the clutch.

Parishing your car always need to use a manual brake, especially if the surface is tilted. It is also always worth remembering the position of the wheels during the parking lot. They need to be turned out in such a way that in the case of a sudden movement, the car has not found himself on the roadway.

Driving a car - the dream of many. Many people represented or dreamed of how the car sits down behind the wheel, it turns it away from the seat under the roar of the engine. But, in fact, you can get into the awkward situation at the initial stage - on the start of the engine. 8 out of 10 newbies do not know how to do it. Anyone would say: "Well, what about this complex? I put the key, turned him, and I went! ", But it was not there.

Having arranged more comfortably in the driver's seat, making sure that all mirrors are configured correctly that there are easy access to everything you need, you can start the engine.

By inserting the key to the ignition lock, start turning it clockwise. If it does not work, we try to twist in the opposite direction. In a situation where it does not help, you need to use a tricky and extremely easy way: just click on the brake pedal and only after that start turning the key. This is not a malfunction or small damage, this is a modern safety mechanism. It is mainly present in new cars. After these actions have done, the car will have to start. Most machines have a steering wheel lock. In a locked position, no steering wheel rotate. In this situation, you just need to simultaneously simultaneously move the steering wheel and rotate the key until the unlock is unlocking.

We bring the car with a manual gearbox

Before turning the key, you need to understand whether the machine is on the transmission or not. The fact is that during parking the car is usually put on the handbrake and the transfer (first or rear). If you try to start, then the car jershits on the meter one and a half or back and stalls. Therefore, either before you start to translate the lever to the neutral position, or more correctly, with the factory, squeeze the clutch and put the lever into the neutral position.

The car in this case should be on the manual brake and you must be confident in it, otherwise it can turn under the slope. If you are not sure - squeeze the brake.

Some machines have a clutch fuse. If you do not choose the clutch pedal to the end, it breaks the feed to the starter of electricity. After the engine is running, you need to continue to hold the clutch pedal until the gear knob is set to neutral. Otherwise, you can expect that the car will start simply shaking and twitch.

Carburetor and Injector Car

If you ever were interested in the launch of the engine, then surely heard that the gas pedal should be pressed before rotating the ignition key. First you need to know exactly, carburetor is a car or injector. In the injection gas, prescribe is definitely not worth it.

In the case when the machine is equipped with a carburetor, you need to make sure that the engine is in: hot or cold. If the engine recently worked, it is believed that it is hot. It is also believed that even if the car spent the whole day under the scorching sun, the engine is still in a cold condition.

If the engine of the machine is in a hot condition, then the gas pedal is not required to prescribe. But if I still had to do this, this suggests that the engine has some kind of malfunction and requires a repair. When starting the machine when its engine is in a cold condition, takes a little more fuel. Several times press the gas pedal, about 1 or 2 times, after which we try to start the car. In the case when she still did not start, you need to try to click on the gas pedal a couple more times. The thing is that when you press this pedal, a carburetor plug will be closed, while skipping a small amount of fuel into the engine. After each time, when the gas pedal is released, fuel falls into the engine, so you should not overdo it with this case. Otherwise, you just can simply pour your engine, after which it will not start. With a factory on the cold, it is worth pulling out the pitch of the supply (if available) and as the motor warms, it is necessary to smoothly drag it into the initial position.

We start the car with an automatic transmission

In such a car, there will be no clutch pedal. Look in the instructions for your car, in what position the gear selection lever should be launched the engine. These are usually "P" and / or "N" modes. Also, many cars with automatic transmission will not start if at the time of launch will not be pinned the brake pedal. Read how to use the automatic transmission and you will not have any questions.

If you failed to "force" the car to start for 1 minute, you should wait for about 5 minutes. It is necessary in order for the starter to cool. Otherwise, he can burn. Be sure to make sure that the gear switch is in a neutral position. If still suddenly the car starts, a car's push can occur, which can lead to a collision with anyone or anything.

Have questions? We watch the video how to make a car from Bloggeravto:

How to get a car in winter

We must literally witness to know what to do in such a situation.

We are convinced that the radio, the fan stove, heated seats and glasses are in a disconnected state. All these devices are unnecessary battery powerors.
At this stage, you need to give the battery to warm up. To do this, you can turn on the highlight to approximately 30 seconds or about 2 minutes of the neighbor (this recommendation is relevant for old cars). If there are doubts in the automotive battery, then you can repeat these actions several times.
Several times we press the pedal responsible for the grip, while taking the attention of what is done on the machine with MCP (manual gearbox). In the injection machines, the gas pedal cannot be concerned until the machine is started. After the engine begins to work, you should not dramatically throw the clutch pedal, and you need to get it out gradually.
We start the engine.
If it fails to start the engine 2 or 3 times in a row, it is simply necessary to wait for a while - about 1.2 minutes.

Watch the video on how to properly start a car in a strong frost:

If nothing helps, then it is possible to frozen the battery, what to do in this situation, see the link.

We bring a diesel car in the winter season

Glow candlelight indicator

The diesel engine is especially difficult to start in winter due to the paraffinization of fuel. In the cold fuel time it is worth refilling only the winter diesel fuel - pay attention when refueling!

Machines with diesel engine are equipped with heat candles. They heat the fuel, facilitating the start of the motor. Therefore, before you start, we turn on the ignition and wait while the indicator of the glow candles is too. In a strong frost you can repeatedly Give to extinct the indicator and only then start.

If you still do not start and you are sure that the problem is not exactly in the battery (by the way, to be confident in it, read how to choose the battery correctly) - it means all the same frozen diesel fuel.

The simplest thing that can be done in this situation is to drive a car for several hours into the heated garage (yours, friend, or in the indoor at the shopping center.)

If there is no such possibility, you just need to warm up in the oil and fuel filter area. To do this, there must be access to the bottom of the car: i.e. Either raise it with a jack, or use the elastic, pit or lift. A soldier lamp is usually used as a heat source, you can try a home or construction hairdryer (you need an electricity source.) Then try again to start the car.

We bring cars without battery

Each driver probably faced the situation when his car simply does not start for incomprehensible reasons. And the problem may appear as a result of the raw or hungry weather, as well as due to the weak battery. In this case, you need to try to start the engine with the "Tolkach".

You need to be sure that brakes work in your car. You can use the second car, the slope of the road or several firmly folded men as a tug. If the machine has a carburetor, then you must first pump a little fuel, pressing the gas pedal about 3 or 4 times.

Now you can start. You must insert the key to the ignition lock and turn it. After that, you can push the car. As soon as the car received a small acceleration, you need to press the clutch pedal and switch the handle to the position corresponding to the second transmission. Now you need to carefully release the clutch pedal. You need to feel a small push, after which the engine must start. All actions must be done calmly, but quickly, in order to avoid any error. After the car started, you can stop it, but not drowning the motor, but give it to warm up for fifteen or twenty minutes.

If this operation has not turned out the first time, you can try to do it several times.

Before trying to start your car in this way, you should read in the instruction manual, does the manufacturer admits such an action. For many modern cars, in particular, Chevrolet Aveo, it can lead to a serious engine breakdown.

If there is no possibility to push the car with the help of men, or there is no cable to disperse a car with another car or such a start-up method is prohibited by the manufacturer, then you can "check" the battery of the broken car from the car battery at a suitable state. For this you need special wires with clips to skip the energy from a good machine to the broken. You can read detailed instructions for this method.

Never try to start the car if you are a newcomer and do not understand this case at all. In this case, on this issue it is better to turn to a more experienced person, in order to avoid unnecessary and extremely unpleasant breakdowns.

And to finish on a positive note, watch the video - the girl is the first time behind the wheel and can not get started:

How to make a car?

In experienced drivers, the question of how to make a car, it does not arise at all, but for beginners who only recently purchased a car or only going to buy it, this information is more than useful and necessary.

From how correctly you start your car, in the first place, the engine is depends on the engine, its health and as a result of the stability and reliability of its work. There are a number of rules, the execution of which will allow for a long time to maintain the engine performance.

We start the car with the manual transmission

First, consider the question of how to make a car with a mechanical gearbox.

First of all, we put the speed lever in the neutral position. This is done when the clutch pedal is pressed (turn off the engine clutch with the checkpoint), the parking brake should be in a closed position. Next, you need to turn on the ignition when the clutch pedal is squeezed, inserting the key to the lock and turning it clockwise to the audible click. At the same time, control indicators of the oil pressure, battery charging should be loaded on the dashboard. This suggests that the ignition system is included.

We start the starter with the next turn of the key clockwise, after a few seconds, subject to the condition of the engine system, it must start, as will indicate the characteristic sound of the working motor. Another evidence that the motor started and works is that the control indicators that were lit at start-up should go out. To clearly imagine it, it is advisable to find a lesson on the Internet on how to start the car. Video, or rather numerous options, will be offered in a large volume.

We start the car with automatic transmission

We put if it is not worth it, the speed switch selector to the position "P" (parking).
Press the brake pedal.
Motor taking, not letting the brake pedal. Insert the key to the lock, turn it clockwise to the characteristic click, and the indicators light up on the dashboard, and the gas station is launched. After the indicators go out, turn the ignition key clockwise before starting the starter, the key can be released, it will return to its original state. If the engine does not start, take another 2-3 attempts with a break of 30 seconds. If the engine system is in good condition, the motor must start.
After the box warms up, move the selector to the "R" or "D" position, based on how the movement must begin.
Let the brake pedal and start moving.

Important moment after starting the engine: it is necessary to warm it for some time. This is necessary to start the normal operation of the motor lubrication system, as the oil fog is the main source of lubrication of pistons and cylinders - is not formed immediately. Warming up is recommended at idle with the number of motor turns, slightly exceeding the amount of idolot.

While the engine warms up, you can wipe the glass or clean the car from snow. By the way, about the snow. In winter, there are their own rules of how to start the car into severe frosts.

Actually, the problem of starting the engine in winter deserves separate attention, so it is better to get acquainted with the methods of its decision by going to. Experienced drivers are preparing for winter in advance, and preparation is not only in replacing summer rubber on the winter. The question that we lit in the article is very important for each driver, since the correct establishment of the machine is directly related to the work of the vehicle and, therefore, with the safety and comfort of driving.

Any driver may be in such a situation when the battery sits on the car, and it is impossible to start it by turning the ignition key. As a rule, the discharge of the battery for the owner of the car is always an unexpected turn of events. Although in the overwhelming majority it has quite objective reasons that have their consequences. The first feeling is confused and annoyance. Especially when a person turns out to be alone on the highway, or urgently need to go somewhere, and the motor does not work. What to do in such a situation and how to start the car if the battery sat down?

The reasons why the battery "sits" most often

No matter how cool, very often a sudden stopping of batteries in the car contributes to the carelessness or abutation of its owner. For example, if the driver forgot to turn off the headlights or listened to the tape recorder all night. It is not surprising that the battery was quickly discharged with non-convicted headlights, and, as if the owner either started the car in the usual way, the battery resources for starting the engine will not be enough.

It may happen that the battery will be fully discharged - in fact, in zero, and its capacity will no longer be possible. Such situations cannot be allowed, and when traveling is important to remember such things as elementary savings of the battery energy.

Besides, cold and frost Also are always an additional provoking factor for loosening the battery. Especially in the event that it was in a cold room for too long. Any driver should know that in winter, it is impossible to allow the discharge of the battery "in zero" Otherwise, it can reflect it fatal on it.

Whatever it was, the driver who first turned out in a similar situation, will have to learn how to make a car if the battery sat down. In how to determine whether the battery takes, nothing is difficult.

Signs that the car is discharged

Signs of the seal battery are always evident, these are symptoms that are difficult to confuse with any other malfunction.

How to understand that the cause of the "died" engine is in the battery:

when the ignition key rotates, the sound operation of the engine changes dramatically - It becomes weak, more monotonous and drawn;
if you got a battery, The light of the indicator of its charge on the car instrument panel fisks or a light bulb at all may not light up ;
when trying to start the motor snapping sounds are heard from under the car hood .

Fortunately, there are many tested and popular ways to make the car if the battery sat down.

To begin with, we list them in order:

So that the car starts, you can push it . But the method works far from all cars.
Car can be started through the cigarette lighter . In this case, the "Seek" you need from the battery of the donor car. Either from a special start charger if it is on hand.
"Fast charge" method . If there is a conventional charger for AKB with the ability to adjust the current indicators;
« Pig"- manual spinning of the knee shaft using a transmission (not for all machines).
Methodology called "Drunk Battery" . Hard, but sometimes an effective way out of the position, when there are simply no other means at hand.

Method "Tolkucha Manual"

It is one of the most common - unconditionally, in a city feature or where there is a lively track. To do this, the driver needs to turn on the speed, and several people will simply push the car from behind to spin the wheels, and the engine itself started due to the transmission.

Before assistants begin to push the car, the driver should use (best!) Rear transmission . As is known, the indicator of the gear ratio has more than the rest. The surface of the road must be as solid as possible and not slide - In this case, the car starts faster.

Further turn the ignition, try, how to squeeze the clutch and let the helpers try to push the car. As soon as the speed is scored, the grip must be released and, if the tire clutch turned out to be sufficient, the knee shaft will come into motion using the transmission. When you understand and hear that the motor has earned as it should, squeeze the grip again and give gas to stabilize the operation of the motor.

Despite the effectiveness of this old good method, it will not work in winter on a slippery track . In the case of a smooth and slippery surface, the clutch of the wheels with it will be very low. And this means that the transfer included will simply work "inhabitant."

However, if you take a tug machine with a cable and another car, the method can still work. But not always: Most likely, it will be necessary to drag a very long time to drag the castled car in the icing track in order for its wheels to be spinning, as it should.

Also, the "Tolkach" method cannot be applied with respect to machines with a gearbox "machine" . As for the injector DVS - "Tolkach" here is also not recommended. But, if the case is a critical, other exit may not be.

"Cursting": method for all cars

The output is optimal for all machines, no matter what they have a gearbox - manual or automatic. The main thing is to find a second motorist who will come to the revenue by providing its car as a donor. And the battery at the assistant was charged enough.

In order to start the car with a served battery from another car, you will need a special wire with clips at the ends. The car "donor" is adjusted close to your car.

It is important to know how to make it properly not to make mistakes:

Turn off the ignition on one and on other machines.
Wires with "crocodiles" Connect the batteries to each other, observe the polarity - The positive pole of one battery to the positive pole of another - and only then the minus pole of the donor battery is displayed on the mass of the receiving machine (it can be some unsubeced part of the body or even the engine).
Get the donor machine motor . Let it remain running for a while while the battery accepting the battery "will revive", recharging.
Mock the donor motor, remove the wire and try to run the motor motor which must already be charged a bit. If the motor does not start, the scheme can be repeated again, and it should be crowned with success.

In no case, do not start the car if the battery is discharged, and the engine of the "donor" engine works. If you run the "host" motor, without turning off the second motor, the starter "donor" can break.

Givery if the battery sat on the machine, you can and from a special charging and starter designed for this purpose. The scheme itself is similar to cigarette from another machine. The method is very convenient and also universal for everyone. However, the driver will have to take care that this charger is always with it. You can carry it with you, and to secure this in advance from situations when there may not be people who can help.

Fast charging method

If you have a key charger at hand, where you can adjust the current indicator, you can quickly recharge the battery with it. To do this, you should charge the battery as usual, just to keep it in time not more than 15-20 minutes, setting the current no more than 10 percent of the nominal battery capacity.

The method is always working, but for the battery it will not call it: Battery can lose a significant amount of capacity . Therefore, it is recommended to be applied only in emergency cases.

Method of slings

It means manual spinning of the knee shaft with the use of transmission and is suitable only for machines with a manual transmission . One of the leading drive wheels is underdeveloped, then the highest speed is turned on, the string is wound on the wheel (it must be a very strong rope, at least, the path of meters in length). After that, the ignition is turned on.

The wheel is spinning manually: you need to dramatically and dramatically for the rope sling. At the same time, it is important to know how correctly and gently rotate the wheel so that the sling is not confused. In this way, you eventually start but not in winter . Also, the volume of the motor of your car should not exceed 1.5 liters.

"Drunk battery" method

In fact, this is not a joke, and we are talking about a really working method used exclusively under certain circumstances of a particular force majeure.

It is clear that the alcohol-containing liquid will have to start the engine. And therefore, in front of the eyes, the picture immediately arises when the company has fun in the woods in the forest all night listened to the radio, and in the morning it turned out that the car does not start.

As always, there is no limit of human ingenuity. In batteries can be pouring a liquid containing alcohol. The main thing is that there is no sugar in it. In each compartment poured to 30 ml of red or white wine . Enters into an active chemical reaction with alcohol, the resistance drops, and the voltage becomes higher - and the motor starts.

Remember: vodka or moonshine do not start the car because sugar is present in that and in another drink.

Of course, such a method from the category "DIY" will finally destroy the battery, but if you happened to be in a blind place, it can be real salvation.

How to extend the life of the battery

In order for emergency situations with the battery in your life as little as possible, observe simple rules. They will help avoid sudden force majeure.

You need to know how to properly care for the battery and control its work:

More often, remove the voltage indicators of your battery , do not forget that the indicator of a well-charged battery should be 12.6-12.7 VOLT.
If you are the owner of a liquid crystal battery, check the state of the electrolyte and lead plates and serve it of necessity.
Do not allow your acb fully discharged . Deep discharges reduce the indicators of its container, which can be fatally affected by starting currents, especially in winter.
In winter It is worth further to show care of the battery and buy a warm case for him . BUT if frosts are strong then it needs to be removed from the car and make out of the garage to heat .
Always watch out the condition of the machine terminals . When they are oxidized, electrical conductivity deteriorates, which may even block the flow of electrical pulses.
Standing short trips, unfortunately, contribute to the rapid battery discharge because in their process he does not have time to recharge from the generator. Try, if possible, reduce the number of short trips . And if it is impossible, arrange your car "long" trips for 40 minutes or an hour, at least once or two per week.

And of course, you always need to follow the battery charge indicator on the board and always turn off the headlights and the radio if you leave for a long time.

Starting the engine at a sex battery is a process that is often accompanied by a stressful situation. Therefore, try to abide by simple rules of exploitation and care of the battery in order for such situations to not arise.

Many compatriots since childhood are dreaming about driving his own car. Sitting behind the wheel, you can break with the breeze on the full move under the roar of the motor. However, at the start of some motorists, certain difficulties lie, especially if they studied by car with "mechanics", and bought a car with automatic transmission. At the same time, the question will be relevant how to make the machine machine. Ask for more experienced car owners is not always possible, so you have to comprehend the basics.

Unlike cars with a manual transmission, the automatic transmission has much more advantages while driving. With her, many standard maneuvers are facilitated, which the driver is obliged to perform on the road.

At the same time there are several varieties of gearboxes that have no clutch pedals in the cabin:

classic machine;
robotic box;
variable speed drive.

The principle of management of them is similar, and on functioning can be slightly distinguished by "robots", having a difference in the number of gears, as well as slightly characterized by the go of the lever. But for a person sitting at the wheel, these differences at first will be noticeable.

Add a chair and steering wheel in height and tilt, check the position of the transmission mode lever to figure out how to start the machine on the machine. He must be in a neutral point or "Parking". With the established other modes (Drive "D", the reverse "R", the imitation of mechanics "M") in the car starts blocking. The car will not respond to such a start.

Note: The first rule is to install the lever to the position "N" or "P". In any other position, "fool protection" will work, that is, electronics will not give the engine to the transmission intended for movement.

Even this axiom is able to withdraw from the equilibrium of a young driver. Which of the modes will be preferable in such a situation? The fundamental difference is how to properly start the machine with neutral or parking there. This is a matter of taste or habit.

During the car's stop, the drivers often put a car on "P", therefore, many of the situation come. Neutral mode in the machine performs the fact that the role in the mechanics. If you start the car from it, it is recommended to pre-install the car to the handbrake, and then start the motor.

For the winter start, it is recommended to use parking having more advantages in this case. In the car on "P" the brakes are not used, and the shaft is blocked. The chance is reduced that the brake pads are talking to disks or drums.

At the next stage, squeeze the brake pedal, especially for the "N" mode, it is optional in Parking. With a squeezed pedal, it will be easier to switch to the "Drive" position. Most often this rule is produced to automatism.

Now you can insert the key in the ignition and turn it clockwise. During this standard procedure, the motor accelerates to about 1000 rpm.

Express the car with automatic transmission

Not always the car is in a working condition. According to the habit after the "mechanics", some drivers are trying to make the car on the machine from the pusher. However, such an occupation in most cases leads to sad consequences.

The rigid connection is unlike the MCPP in the automatic transmission between the crankshaft and wheels are missing. Clutch elements are moving due to pressure drops in the torque converter. This means that forcibly scrolling the motor with automatic transmission on the descent with the included "D" on the theory will not be possible. Although this rule can be denying to refute the separate coupling on some models of the car.

Honda's owners, raising it more than 30 km / h and switched the lever in Drive, managed to start the motor.

On other machines, the empirical acceleration rate was reached by 50 ... 60 km / h. However, it is worth noting that the machines were equipped with a classic transmission with hydrotransformers.

Start on automatic transmission

Many automatic transmissions that are unprepared for winter operating conditions can bring unpleasant surprises to their owners. They lead to a difficult engine start. Excessively dense oil, which raised its viscosity at low temperatures at night, is not able to effectively perform its functions. It leads to the need to increase the effort to rotate the "automaton" shafts.

This means that the motorist should take care timely to replace the transmission oil. What it will be cleaner, the easier the car to start. For a problem car, it is recommended to "searcate" from the appropriate equipment or already a working car.