Megan 2 What oil pouring. Motor oil for Renault Megane

The first generation of Renault Megane appeared in 1995. The model was produced in the body versions of the hatchback, sedan, wagon, coupe and convertible and equipped with gasoline atmospheric motors of 1.4 - 2.0 liters with a capacity of up to 150 hp. and 1.9-liter diesel engines. In the second and third generation, gasoline modifications with turbocharging appeared, including the MEGAN RS sports version, the power of which reached 275 hp, and the new diesel engines 1.5 DCI and 2.0 DCI. In 2015, Renault Megane fourth generation was represented.

Which oil to fill in Renault Megane depends on the year of production and modification of the car.

ELF EVOLUTION 900 SXR 5W30

As a motor oil for Renault Megane 2 1.6 and 2.0, gasoline is recommended created by synthetic technology ELF EVOLUTION 900 SXR 5W30. It meets the tolerance of the Renault RN 0700 automaker and has excellent protective characteristics. This oil for Renault Megane 2 1.6 protects the engine from wear and deposits in the most complex operating modes, such as urban traffic in start-stop mode, sports driving and cold start. Increased fluidity ELF EVOLUTION 900 SXR 5W30 reduces viscous friction between parts and reduces fuel consumption, and antioxidant properties guarantee effective protection when using this oil in the Renault Megane 2 1.6 engine during the entire intersavice interval.

ELF EVOLUTION 900 SXR 5W40

High-quality synthetic technology ELF EVOLUTION 900 SXR 5W40 Motor oil complies with the requirements of ACEA A3 / B4, RENAULT RN 0700 and RN 0710. The automaker advises it as oil for Renault Megane 3 with gasoline and diesel engines, with the exception of cars equipped with a sump filter ( DPF). It guarantees maximum protection of the engine, especially the system of gas distribution, in any conditions of movement, including extreme. Special additives in the ELF EVOLUTION 900 SXR 5W40 support the motor in purity, and excellent thermal and oxidative stability makes it possible to use this oil in the Renault Megane 3 engine with increased replacement intervals (in accordance with the automaker's recommendations).

ELF Evolution 900 FT 0W40

Fully synthetic engine oil ELF EVOLUTION 900 FT 0W40 has RENAULT RN 0700 / RN 0710 tolerances, and, thanks to the winter viscosity class, 0W is distinguished by increased low-temperature fluidity. It is recommended to use this oil in Renault Megane engines, which are operated in cold climate conditions: it guarantees a confident engine launch into any weather. Outstanding protective properties of ELF EVOLUTION 900 FT 0W40 prolong the service life of the motor, and the oxidative stability of this oil for Renault Megane retains its characteristics during the entire period between replacements.

ELF Evolution Full-Tech Fe 5W30

The engine oil with a reduced content of sulfate ash ELF EVOLUTION FULL-Tech Fe 5W30 is designed for diesel cars that meet modern environmental requirements. It can be used as oil for Renault Megane 2 and 3 diesel, which are equipped with a sump filter: Low SAPS technology ensures the effectiveness of its operation and long service life. In addition, ELF Evolution Full-Tech Fe 5W30 guarantees reliable long-term protection of the engine from wear and harmful deposits. According to the results of independent ACEA tests, it reduces fuel consumption by 2.1% compared with conventional oil, which provides a decrease in operating costs when applying this oil for Renault Megane 2.

Using the selection service on our site you can choose oil for Renault Megane of various versions.

What kind of oil to fill in the Renault Megane engine depending on the modification:

  • Renault Megane i 1.4 C64 / B64 / L64 / E64 (1995-2001)
  • RENAULT MEGANE I 1.4 16V C64 / B64 / L64 / E64 (1999-2002)
  • RENAULT MEGANE I 1.6 C64 / B64 / L64 / E64 (1995-1999)
  • RENAULT MEGANE I 1.6 16V C64 / B64 / L64 / E64 (1999-2002)
  • RENAULT MEGANE I 1.8 16V C64 / B64 / L64 / E64 (2001-2002)
  • RENAULT MEGANE I 2.0 C64 / B64 / L64 / E64 (1995-2000)
  • RENAULT MEGANE I 2.0 16V C64 / B64 / L64 / E64 (1995-1998)
  • RENAULT MEGANE I 2.0 16V IDE C64 / B64 / L64 / E64 (1999-2002)
  • RENAULT MEGANE II 1.4 16V C84 / B84 / L84 / K84 (2002-2008)
  • RENAULT MEGANE II 1.6 16V C84 / B84 / L84 / K84 (2002-2008)
  • RENAULT MEGANE II 2.0 16V C84 / B84 / L84 / K84 (2002-2008)
ELF EVOLUTION 900 SXR 5W30
  • RENAULT MEGANE I 1.9 D C64 / B64 / L64 / E64 (1995-2000)

The first generation of Renault Megane appeared in 1995. The model was produced in the body versions of the hatchback, sedan, wagon, coupe and convertible and equipped with gasoline atmospheric motors of 1.4 - 2.0 liters with a capacity of up to 150 hp. and 1.9-liter diesel engines. In the second and third generation, gasoline modifications with turbocharging appeared, including the MEGAN RS sports version, the power of which reached 275 hp, and the new diesel engines 1.5 DCI and 2.0 DCI. In 2015, Renault Megane fourth generation was represented.

Which oil to fill in Renault Megane depends on the year of production and modification of the car.

ELF EVOLUTION 900 SXR 5W30

As a motor oil for Renault Megane 2 1.6 and 2.0, gasoline is recommended created by synthetic technology ELF EVOLUTION 900 SXR 5W30. It meets the tolerance of the Renault RN 0700 automaker and has excellent protective characteristics. This oil for Renault Megane 2 1.6 protects the engine from wear and deposits in the most complex operating modes, such as urban traffic in start-stop mode, sports driving and cold start. Increased fluidity ELF EVOLUTION 900 SXR 5W30 reduces viscous friction between parts and reduces fuel consumption, and antioxidant properties guarantee effective protection when using this oil in the Renault Megane 2 1.6 engine during the entire intersavice interval.

ELF EVOLUTION 900 SXR 5W40

High-quality synthetic technology ELF EVOLUTION 900 SXR 5W40 Motor oil complies with the requirements of ACEA A3 / B4, RENAULT RN 0700 and RN 0710. The automaker advises it as oil for Renault Megane 3 with gasoline and diesel engines, with the exception of cars equipped with a sump filter ( DPF). It guarantees maximum protection of the engine, especially the system of gas distribution, in any conditions of movement, including extreme. Special additives in the ELF EVOLUTION 900 SXR 5W40 support the motor in purity, and excellent thermal and oxidative stability makes it possible to use this oil in the Renault Megane 3 engine with increased replacement intervals (in accordance with the automaker's recommendations).

ELF Evolution 900 FT 0W40

Fully synthetic engine oil ELF EVOLUTION 900 FT 0W40 has RENAULT RN 0700 / RN 0710 tolerances, and, thanks to the winter viscosity class, 0W is distinguished by increased low-temperature fluidity. It is recommended to use this oil in Renault Megane engines, which are operated in cold climate conditions: it guarantees a confident engine launch into any weather. Outstanding protective properties of ELF EVOLUTION 900 FT 0W40 prolong the service life of the motor, and the oxidative stability of this oil for Renault Megane retains its characteristics during the entire period between replacements.

ELF Evolution Full-Tech Fe 5W30

The engine oil with a reduced content of sulfate ash ELF EVOLUTION FULL-Tech Fe 5W30 is designed for diesel cars that meet modern environmental requirements. It can be used as oil for Renault Megane 2 and 3 diesel, which are equipped with a sump filter: Low SAPS technology ensures the effectiveness of its operation and long service life. In addition, ELF Evolution Full-Tech Fe 5W30 guarantees reliable long-term protection of the engine from wear and harmful deposits. According to the results of independent ACEA tests, it reduces fuel consumption by 2.1% compared with conventional oil, which provides a decrease in operating costs when applying this oil for Renault Megane 2.

Using the selection service on our site you can choose oil for Renault Megane of various versions.

What kind of oil to fill in the Renault Megane engine depending on the modification:

  • Renault Megane i 1.4 C64 / B64 / L64 / E64 (1995-2001)
  • RENAULT MEGANE I 1.4 16V C64 / B64 / L64 / E64 (1999-2002)
  • RENAULT MEGANE I 1.6 C64 / B64 / L64 / E64 (1995-1999)
  • RENAULT MEGANE I 1.6 16V C64 / B64 / L64 / E64 (1999-2002)
  • RENAULT MEGANE I 1.8 16V C64 / B64 / L64 / E64 (2001-2002)
  • RENAULT MEGANE I 2.0 C64 / B64 / L64 / E64 (1995-2000)
  • RENAULT MEGANE I 2.0 16V C64 / B64 / L64 / E64 (1995-1998)
  • RENAULT MEGANE I 2.0 16V IDE C64 / B64 / L64 / E64 (1999-2002)
  • RENAULT MEGANE II 1.4 16V C84 / B84 / L84 / K84 (2002-2008)
  • RENAULT MEGANE II 1.6 16V C84 / B84 / L84 / K84 (2002-2008)
  • RENAULT MEGANE II 2.0 16V C84 / B84 / L84 / K84 (2002-2008)
ELF EVOLUTION 900 SXR 5W30
  • RENAULT MEGANE I 1.9 D C64 / B64 / L64 / E64 (1995-2000)

The first generation of Renault Megane appeared in 1995. The model was produced in the body versions of the hatchback, sedan, wagon, coupe and convertible and equipped with gasoline atmospheric motors of 1.4 - 2.0 liters with a capacity of up to 150 hp. and 1.9-liter diesel engines. In the second and third generation, gasoline modifications with turbocharging appeared, including the MEGAN RS sports version, the power of which reached 275 hp, and the new diesel engines 1.5 DCI and 2.0 DCI. In 2015, Renault Megane fourth generation was represented.

Which oil to fill in Renault Megane depends on the year of production and modification of the car.

ELF EVOLUTION 900 SXR 5W30

As a motor oil for Renault Megane 2 1.6 and 2.0, gasoline is recommended created by synthetic technology ELF EVOLUTION 900 SXR 5W30. It meets the tolerance of the Renault RN 0700 automaker and has excellent protective characteristics. This oil for Renault Megane 2 1.6 protects the engine from wear and deposits in the most complex operating modes, such as urban traffic in start-stop mode, sports driving and cold start. Increased fluidity ELF EVOLUTION 900 SXR 5W30 reduces viscous friction between parts and reduces fuel consumption, and antioxidant properties guarantee effective protection when using this oil in the Renault Megane 2 1.6 engine during the entire intersavice interval.

ELF EVOLUTION 900 SXR 5W40

High-quality synthetic technology ELF EVOLUTION 900 SXR 5W40 Motor oil complies with the requirements of ACEA A3 / B4, RENAULT RN 0700 and RN 0710. The automaker advises it as oil for Renault Megane 3 with gasoline and diesel engines, with the exception of cars equipped with a sump filter ( DPF). It guarantees maximum protection of the engine, especially the system of gas distribution, in any conditions of movement, including extreme. Special additives in the ELF EVOLUTION 900 SXR 5W40 support the motor in purity, and excellent thermal and oxidative stability makes it possible to use this oil in the Renault Megane 3 engine with increased replacement intervals (in accordance with the automaker's recommendations).

ELF Evolution 900 FT 0W40

Fully synthetic engine oil ELF EVOLUTION 900 FT 0W40 has RENAULT RN 0700 / RN 0710 tolerances, and, thanks to the winter viscosity class, 0W is distinguished by increased low-temperature fluidity. It is recommended to use this oil in Renault Megane engines, which are operated in cold climate conditions: it guarantees a confident engine launch into any weather. Outstanding protective properties of ELF EVOLUTION 900 FT 0W40 prolong the service life of the motor, and the oxidative stability of this oil for Renault Megane retains its characteristics during the entire period between replacements.

ELF Evolution Full-Tech Fe 5W30

The engine oil with a reduced content of sulfate ash ELF EVOLUTION FULL-Tech Fe 5W30 is designed for diesel cars that meet modern environmental requirements. It can be used as oil for Renault Megane 2 and 3 diesel, which are equipped with a sump filter: Low SAPS technology ensures the effectiveness of its operation and long service life. In addition, ELF Evolution Full-Tech Fe 5W30 guarantees reliable long-term protection of the engine from wear and harmful deposits. According to the results of independent ACEA tests, it reduces fuel consumption by 2.1% compared with conventional oil, which provides a decrease in operating costs when applying this oil for Renault Megane 2.

Using the selection service on our site you can choose oil for Renault Megane of various versions.

What kind of oil to fill in the Renault Megane engine depending on the modification:

  • Renault Megane i 1.4 C64 / B64 / L64 / E64 (1995-2001)
  • RENAULT MEGANE I 1.4 16V C64 / B64 / L64 / E64 (1999-2002)
  • RENAULT MEGANE I 1.6 C64 / B64 / L64 / E64 (1995-1999)
  • RENAULT MEGANE I 1.6 16V C64 / B64 / L64 / E64 (1999-2002)
  • RENAULT MEGANE I 1.8 16V C64 / B64 / L64 / E64 (2001-2002)
  • RENAULT MEGANE I 2.0 C64 / B64 / L64 / E64 (1995-2000)
  • RENAULT MEGANE I 2.0 16V C64 / B64 / L64 / E64 (1995-1998)
  • RENAULT MEGANE I 2.0 16V IDE C64 / B64 / L64 / E64 (1999-2002)
  • RENAULT MEGANE II 1.4 16V C84 / B84 / L84 / K84 (2002-2008)
  • RENAULT MEGANE II 1.6 16V C84 / B84 / L84 / K84 (2002-2008)
  • RENAULT MEGANE II 2.0 16V C84 / B84 / L84 / K84 (2002-2008)
ELF EVOLUTION 900 SXR 5W30
  • RENAULT MEGANE I 1.9 D C64 / B64 / L64 / E64 (1995-2000)

In a timely manner, the key to the rapid functioning of nodes and car systems. This statement is true for the Renault model. Megan 2. The timeliness of service becomes particularly relevant if it comes to replacing the oil in the motor. Here, an important aspect is not only to pour a quality product, but also to monitor its level and condition during the entire period of its use. In this article, we will tell how the oil change occurs, as well as how much oil is pouring into the engine.

What are the nuances of fluid choice?

Lubricants used in Renault Megan 2 Motors must be on the regulation of classifiers for the following criteria:

  • operational qualities (API);
  • viscosity (SAE).

According to the category AP in the Motors Renault Megan 2 of the first generation (year of production - until 2003), only oils that have SL marking on the package, and in the second generation aggregates (since 2004) - SM or SN.

If the oil change is required, then for these purposes it is recommended to choose precisely oils that are indicated as SM and SN. Such oils are endowed with more balanced lubricating and laundering properties and allow the engine to produce optimal performance.

Renault Megan 2 Motor Lubricants should be selected by the main criterion, the role of which serves as a car mileage:

  • if this is a new engine or with a mileage of less than 20% of a certain value (300,000 km of 100%) - you should pour lubricant whose parameters meet the requirements of SAE 5W30 or 10W30 (all year round);
  • when the mileage was reached in 25-75% (it is 75,000 - 225,000 km) - we use SAE classification lubrication:
  • 10w40 or 15w40 in summer;
  • 5W30 or 10W30 in the cold period (winter).
  • with a solid run (75% or more than 225,000 km), it is recommended to fill the liquid on SAE:
  • 15w40 and 20w40 for summer;
  • SAE 5W40 and SAE 10W40 for the winter.

As an alternative option, you can apply all-season lubricant (SAE 5W40) if the Renault Mileage Megan 2 does not exceed 50 thousand km. Due to the minimum viscosity difference, there will be no harm to the motor.

Renault is simply recommended to use ELF oils. This variant is characterized by an optimal ratio of quality characteristics with a price parameter. Also, you should not get around the attention of such manufacturers as:

  • Castrol;
  • LIQUI MOLY, etc.

When the oil is replaced, it is not recommended to resort to the acquisition of products from unknown manufacturers, not even looking at the persuasion of managers about so far unknown to you with imaginary declared parameters of incomprehensible fluid. Do not forget about how much oil is pouring into the engine. If you already have to purchase inexpensive oil, then it is necessary to be inclined to brands that hurt a hearing at the extensive army of Renault Megane owners 2. Among them:

  • LUKOIL;
  • Gazpromneft;
  • Mobil, etc.

On the frequency, oil replacement is influenced by several factors relating to:

  • conditions and modes of operation;
  • travel manners;
  • processes of natural aging fluid with loss of conditioned properties.

When do you need a replacement of oil? Renault Megan 2 is recommended with a running distance of 8-10 thousand km or after a semi-annual period.


What does the replacement procedure look like?

  1. Replacing the oil is not a complicated procedure, you must first warm up the engine to the operating parameter of the temperature, and then drown. We heat the Renault Megane 2 on the lift or carry out work with the help of the pit. We unscrew the cork of the fuel throat on the motor. It is necessary to ensure the acceleration of the process of laying the oil from the crankcase.
  2. We post the car (or work out of the pit), unscrew the mounting of the lower protection of the motor using a four-man in size to "8". We unscrew the plug of the drain hole on the pallet (not completely, leaving 2-3 turns). We substitute the corresponding container under the motor. Unscrew the cork finally and control the process of draining the waste fluid. After leaving the bulk of the oil, it starts to drip. We wait for the end of this process (on Motor 1.6 it will take no more than 15 minutes.).
  3. Do not screw the drain plug, proceed to unscrewing the oil filter. It is subject to a mandatory replacement for a new one. To facilitate the unscrewing of the element body, use one of the devices:
    - puller;
    - screwdriver;
    - sandpaper, etc.

The filter is deleted carefully because it is filled with a lubricant that can shed.

    1. Before installing a new filter, perform a number of procedures:
      - pour some amount of lubrication inside the new filter while the paper element is not soaked in full, and the cavity of the case will not be filled (this is necessary to eliminate the formation of an air traffic jam after the engine is started);
      - rubber ring around the perimeter of the element housing lubricate with oil;
      - Clean the mud seat on the motor under the new filter.
    2. Swirling the filter case should only apply an effort of the hand. The use of the puller or other fixtures is categorically not recommended.
  1. We replace the old creation puck of a drain plug on a new item. Cork screws with the recommended point.
  2. Before filling a new oil, it is necessary to determine its volume. The 1.6 engine will require approximately 4 liters (5W-40 according to SAE). It is recommended to purchase a couple of liters more to maintain a level in the required limits.
  3. After filling, we withstand a few minutes and check the level of fluid in the motor with the help of the probe. The optimal level will be located between the marks of the maximum and the minimum deposited on the probe itself. The ideal is a bit above the middle. Measurement should be performed by placing the car on the horizontal plane.
  4. At the end, we fill the fluid to the required level, tighten the cork on the plug-in neck, and we bring the car. If the level is sufficient, the oil pressure control lamp on the dashboard will go out within five or less seconds.

If the motor is required washing (for example, when choosing a product from another manufacturer, etc.), then you should consult about the number of washing matter and nuances of its use.

How to control the level?

For accurate measurement, the procedure should be performed on the cooled motor. This contributes to the flow of the maximum volume of fluid into the pallet. We take out the dipstick, wipe dry and clean cloth. Lower the dipstick to the pallet until it stops. Re-removing the dipstick and evaluate the magnitude of the level on the prints of the oil film on the metal surface. If the level of "marked" on the body of oil probe is in the middle of the marked marks, there is no reason for unrest and the motor is provided with a lubricant.

Already on the first extraction of the probe, it is possible to estimate how much oil is pouring into the engine, as well as the quality of oil by external sign. If the color is gold and transparent, then there are no reasons for worrying. In the case of the presence of a dark shade and opaque texture, the fluid should be replaced in a speedy manner.

If the oil is completely black and opaque - urgently needed oil replacement.

In order to avoid serious problems with your Renault Megane 2, you pay for decent attention, in a timely manner fulfilling all the required procedures, including knowing how much oil is inserted into the engine. This will avoid significant financial investments.

Selection and replacement of oil in Megan Engine 2.4: volume and level check

Timely then need to extend your life Renault Megane. And that the parts of the iron horse are not quickly wearing and served as longer as possible, you need to check and correctly change butter In the engine and monitor its condition.

Subtleties of choice

There is a certain systematization by the level of operating properties of oil - API and viscosity - SAE. According to the first, in the renault megane of the second generation to 2003 release, you need to use a labeling liquid on SL packaging, and from 2004 to present - SM or SN. To replace it, it is recommended to choose the latter, since they give the best engine characteristics in the work.

Viscosity oil for Renault Megane 2 should be selected due to its mileage. So, if your Renault with a new engine, or its mileage is:

  • less than 25% (for 100% we take 300,000 km), i.e., up to 75,000 km of run from the planned resource, then lubricating the SAE 5W30 or 10W30 lubricant material all year.
  • 25-75% of the mileage (75,000 - 225,000 km): SAE 10W40 or 15W40 - in summer; 5W30 or 10W30 - winter.
  • more than 75% (more than 225,000 mileage): summer - SAE 15W40 and 20W40; Winter - SAE 5W40 and SAE 10W40.

It is easier not to score head and all season use SAE 5W40 when running from 50,000 km. The difference in viscosity is minimal, so harm the car Renault will not be applied.

What oil pour into the Renault Logan engine.

Renault car manufacturing company itself strongly recommends using the ELF brand. Not always the price is quality, but in this case such a scheme is working as it works. Take for Renault lubricating material top manufacturers, in addition to ELFA, it is Castrol, Liqui Moly and the like.

If you do not afford an expensive petroleum product for Renault Megan, then do not take little-known brands, even if the average price and sellers will convince you in their imaginary good qualities. If you take for Megan From the standard class, then let these brands you have on a hearing - this can be attributed to Lukoil, Gazpromneft, Mobil, etc. These are already proven trademarks.

The frequency of oil replacement in the engine Renault It depends on several factors: the conditions under which trips are made, as far as kilometers, and how you are going - calmly, smoothly increasing and reducing speed, or you have to go in an intense transport stream with frequent, possibly with sharp, stops. And also need to take into account the natural aging of the liquid. Her replacement on Megan It should be done at least once every six months or every 8 - 10,000 km of run.

The process of changing the oil

  1. First, heating the megan motor to the operating temperature. After that wasting. Do not cease - otherwise you can burn. Before lifting the car on the lift or put it on the pit, you need to open the filler plug to butter Better glass.
  2. We raise the car, remove the protection of the palter pallet and the tetrahedron for 8 mm unscrew the drain plug. A very important point - before it is completely unscrewed by putting it under the car in this place any bulk bowl, a bucket. We are waiting for the main flow of fluid, and it will not start dripping. By car with a volume of engine 1.6 it takes an average of 10-15 minutes.
  3. Now, with an open drain plug, unscrew the oil filter (it is also necessary to replace it). To do not really strain, you can use such a device as a special turnkey filter puller by 22. It is sold in stores, though only under the original filter. You can only change it from below, since there is no access to it.
  4. Filter must be unscrewed only if the drain plug is open to more fluid glass from the oil pump. Carefully unscrew the cork with the filter. Since it can also flush fluid, and it is necessary to substitute the container.
  5. If fluid flow occurs when the filter change, it is necessary to remove its residues from the engine parts. So "check the purity" before the end of the work. Before installing a new filter, it must be filled with a small amount of oil and be sure to lubricate the rubber seal.

Renault Duster What oil pour into the engine.

Replacing oil and filter on Renault Megan2

Replacement oil in the engine and oil filter on Renault Megan2.. Kaichny knowledge O. Renault .

This is done so that there is no air traffic jam - this is a problem that occurs when the fluid is lost in the filter, and it circulates only on the motor, while it is much faster and not filtered. Also before installing the filter, we wipe the seat where the sealant is worth. Spin the filter only by hand. In no case is not recommended when swissing it to use the puller.

  • Now produce the replacement of the old laying of drain plug on a new, intimidate and tighten it.
  • So, how much liquid should be poured? For convenience, you can use a funnel. And on the motor, volume 1.6 will require about 4 liters, 5W-40 by SAE. (But you need to buy more for a couple of liters, to keep the desired fluid level).
  • Now it is necessary to check the level of fluid using the probe. It is located opposite the radiator. The desired level should be on the probe in the middle of the marks of the maximum and minimum. Ideally, just above the middle between them. Consider that the machine should stand on a flat horizontal surface. If this is required, we fill at the level of how much it is necessary.
  • We close the cork and start the car, waiting until it stops the oil pressure light bulb, it should be approximately 5 seconds.
  • What oil pour into Renault Megan 2.

    Consult the mechanic about the need for washing the motor if one manufacturer is replaced on another. (How much flushing fluid will be required, etc.)

    How to check the level

    It is advisable to check for a cold engine so that the contents of the engine compartment in the pallet and the measurement was accurate. First you need to pull the measuring probe, wipe dry, clean rag. Then omit until it stops back there, from where they were taken out and get. Check - the level should be between two marks.

    For the first time, when you pulled a dipstick, you can say a lot about the quality of the fluid being checked. If it is golden and transparent, then there is no reason for concern. If the brown is already almost opaque, it will soon have to change it. If the liquid is very dark, almost black and completely opaque - then it is urgent to change it. Well, in the same way, if the liquid is flooded in terms of the level below the MIN mark on the dipstick, fill as much as necessary.