Oil filter paper which is better. How the oil filter works and works

Engine oil is a vital item for any car. It softens the work of the motor and directly affects the longevity of the heart of our steel friend. But nothing lasts forever, so the oil can also wear out and lose its properties. Oil filters can extend its life by helping to maintain the oil in the required condition.

Classification of oil filters

In order to figure out which oil filter to choose for your car, it is worth knowing their characteristics, since there are as many varieties as there are motors.

Specialists in laboratories classify oil elements. Then, according to the marking indicated by them, we buy a suitable product with you. According to statistics, about 60% of purchases are made in the "butter" department.

This is because other filters (air, fuel, etc.) need to be replaced to a lesser extent.

Besides reducing noise, oil is also a conductor. It removes heat generated by friction between engine parts. Therefore, the oil circulation process should in no case be impeded or even more interrupted. When the engine is running, fine metal chips form, which are absorbed by the oil. This is where the need to use this element appears. Carbon deposits and elements of corrosion are also retained by it.

Important! The less dirt in the engine, the longer it runs!

A number of factors need to be considered when choosing an oil filter, but first you need to consider their classification:

• full-flow type of work;
• partial threaded;
• combined.

Each type has its own unique properties, which are determined by the condition of the oil after filtration.

Description of each type

How to choose an oil filter? This question is asked by many car owners. To do this, you need to find out which of the following is more suitable for you.

• The full-flow type of work leads to the need for an early replacement. The principle is simple - everything oil, which is used to lubricate car parts during operation, passes directly through the filter without separation... The advantage of such a filter is speed. Oil cleaning is very fast;
• the partial-flow filter works in parallel with the oil line of the machine, so only a small part of the oil is cleaned, and the rest does not have time to be cleaned and goes to the next round of work. Moreover, the result of this filter is better than that of the previous one. The fact is that the oil goes through the cleaning stage many times and does not contaminate the filter as fast as the first.

Progress does not stand still, therefore, combined filters have appeared that combine full-flow and partial-flow oil purification systems. As a result of research, they have revealed the high efficiency of such oil filtration, which consists in excellent cleaning and an increase in its service life. Due to its reliability, such a filter is used on professional large equipment in the fields of construction and agriculture.

Previously, such machines used a full-flow oil purification system, which led to frequent breakdowns of the crankshaft, its bearings, and oil scraper rings.

Advice! In order to know the answer to the question "How to choose an oil filter for the engine?", You must also take into account its design.

Non-collapsible view

Practice shows that non-separable filters are more often used for our cars.

The construction is simple: filter and two valves. One valve does not release oil back, and the second valve stands to secure the first, if the pressure level in the compartment suddenly increases. A number of factors affect the state of pressure. This may be the contamination of the oil itself, the temperature outside the engine (when the temperature drops, the oil becomes viscous).

The check valve prevents oil from flowing out of the idle engine. This increases the pressure faster when the motor starts to run. It is usually made of rubber and is a ring. Rubber, due to its qualities, wears out over time, and the oil begins to drain. All this leads to a delay in the lubrication of the parts of the heart of the car at startup, which entails faster wear of the material.

Advances in this area have recently created anti-drain valves. They are, of course, the same shape, but very thin. Such a valve is tightly fixed on the cover and secured by a spring. Experts assure the durability of this valve.

Collapsible view

It is appreciated mainly because its design allows you to easily change the filter unit itself, and the consumables are of a low price. The question arises about the choice of this small block of filtration.

It is necessary to pay attention to what quality material this small block is made of. Definitely it is made of pressed paper, but it is the quality of the paper that should interest us. There is a direct connection here - filtration quality depends on the quality of the paper.The better it is, the cleaner. By the way, a lot also depends on how the filter parts are laid. High quality papers have poor throughput and, when properly stacked, will not allow oil to leak. The most commonly used star pattern with a large number of beams, although spiral and chevron patterns can also be found.

The next step in preventing leaks is to impregnate this paper. Phenol-formaldehyde resin does an excellent job with this. It protects the filter from getting wet.

The constant search for the best has led to the emergence of filters using artificial fibers or cotton. The efficiency of such filters is higher, but the hydraulic resistance increases, so the engine heats up longer, especially in the cold season.

With the theory sorted out, let's move on to practice. How to choose the right oil filter? Below are some tips to follow when choosing an oil filter:

• rigid body - the basis of quality;
• all parts of the system must be completely included in one body of an integral solid structure;
• the seal should not be soft;
• clean smooth thread, no nicks or dents;
• check the check valve;
• the bypass valve must be of good quality;
• check for chips, dents, cracks;
• compare the cost with other brands and stores.

Important! Some manufacturers try too hard to please the customer, which causes the quality of the product to suffer.

Negative points:

• the paper is too thick;
• too little pressure is required to start the bypass valve, in this case unrefined oil will enter the engine;
• the check valve must close tightly, otherwise there is a possibility of leakage when the motor is off.

Main brands

Which oil filter company to choose? This question is very relevant, since the huge assortment from many manufacturers is confusing. You should remember simple things: trust trusted brands, learn about product testing results. Otherwise, you can often change not only the filter, but also the oil itself.

You can familiarize yourself with the list of companies in 2015 that have proven themselves from the best side in the production of oil filters:

• MANN,
• Union,
• CHAMPION,
• Fenom,
• Fiaam,
• SF-Filter,
• Bosch.

MANN rises to the first place. For the current period, she offers the buyer a high quality product at an affordable price. Also indicative is the fact that the products of this company are also bought by large organizations with world names. Each filter from this company lasts longer and cleans better thanks to unique technologies. To understand in more detail how to choose the right oil filter, you can see here:

Right behind them is Union. The production is located in Japan, so the market of this country is filled with Union goods, but world corporations also turn to them. The oil filters of the Japanese company are carefully selected and tested. This product does not leave production warehouses without an international certificate of conformity.

The products of the SCT company should be well known, since this German company was the main supplier of this product to the territory of the former USSR. Until now, she is among the leaders in production. High quality materials stop any dirt and particles, are not afraid of temperature and pressure. A wide model range allows you to find filters for any car in the catalog of this company.

For well-coordinated and high-quality work, it is very important to have a good oil filter. It is the best oil filter that will guarantee a long and high-quality vehicle operation.

The oil filter is a device designed specifically for the purification of lubricating, transmission, engine oils, hydraulic fluids for reliable engine operation. The device itself consists of the following components:

• body - a cylindrical metal container with a rolled lid;
• filtering part - most often it is corrugated paper with a certain pore size, through which oil is pumped through a pump. Important parameters of this element are area and porosity;
• check valve - a part necessary to protect the entire filter from destruction;
• anti-drain valve - a rubber cover that prevents oil from flowing back into the crankcase after the engine stops.

In the debate about the right choice of the best oil filters, you can face a lot of controversy. Some experienced car enthusiasts lean exclusively towards one particular brand, while others believe in the healing power of quality oil, and not in favor of a filter. In order to secure the operation of your car and increase efficiency, you will have to understand this issue.

The leader of the rating - Mahle OC205: features and characteristics

Mahle is engaged in the production of all engine components and provides its customers with a huge assortment, from cylinder-piston category units to consumables for maintenance. The brand is one of the main partners of auto production.

The leading position among the best oil filters for cars belongs to the OC205 model due to the following qualities:

• ease of use - it is easy to unscrew it without the use of disk pullers and other outdated methods like chain pullers;
• high quality body workmanship - thick walls are able to withstand pressure during a cold start without deforming;
• increased reliability of the bypass valve - the component is calibrated for a pressure difference of 1 bar. When using synthetic oil of any viscosity, the valve will be guaranteed to protect the engine from contaminated product entering it.

Car owners appreciated this filter not only for its excellent performance, but also for:

• prevalence - it is quite easy to find a model;
• excellent manufacturing quality and long service life;
• perfect fit for the seat.

Users could not think of any drawbacks, but the filter has an unpleasant feature for those who like to use inexpensive semi-synthetic oils. In winter, if they are available in combination with a cold engine, it is better not to drive.

Still in doubt which oil filter is the best - choose the durable and versatile Mahle OC205.

Innovative Mann W75 / 3 for new engines

Among the best manufacturers of oil filters for cars, the second place was taken by Mann, the largest supplier of consumables for conveyor-type auto production. The popularity of Mann filters is due to the use of innovative solutions.

Compared to the previous colleague Mahle OC205, the Mann W75 / 3 filter loses a little - its height and area of \u200b\u200bthe element for cleaning the liquid is smaller. But it will be a good find for cars with practically not worn-out engines, which use synthetic oil with a low viscosity.

With this choice, the rapid accumulation of debris will not cause discomfort between oil changes, but the low height will simplify the installation process. In this model, the opening pressure of the bypass valve is higher - 1.3 bar. Operating with viscous oil and heavy blockages before opening the valve can damage the rubber part.

When determining which company has the best oil filter, you need to consider the pros and cons of the Mann W75 / 3.

The advantages of the model:

• removing it is even easier than Mahle or Bosch - the presence of a deep notch on the bottom allows the element to be unscrewed with a trellis puller;
• facilitated installation process;
• excellent workmanship.

The ease of maintenance of the machine with the Mann W75 / 3 is not the most significant plus, but it is compensated by the excellent quality of the filter.

The disadvantages include only a smaller filtering area in comparison with a standard device.

Distinctive features of the Bosch filter 0451103316

The relevance of the line of consumables and accessories for Bosch, which has already spread its activities all over the world, is constantly maintained. That is why the Bosch filter 0451103316 is in this rating of oil filters for cars.

The difference between the brand models is the presence of a phenolic microfiber surface on the filtering parts. The material used is porous, and the filtration area occupies a significant part, which ensures maximum dirt holding capacity and better screening.

Bosch is not just a good manufacturer of oil filters, it is an expert in creating quality instruments. The presented model is considered the leader in terms of the size of the filtering surface, which occupies almost the entire body of 80 mm. The bypass valve with this configuration works perfectly and has a pressure difference of 1 bar when opening.

As a slight disadvantage, users of such filters highlight the work of the anti-drain valve. With the manufacturer's specified opening pressure of 0.12 bar, it has more resistance than the leading Mahle, so its hard work is felt. If you have a working motor, its functioning will not be a problem, but you will not win the first place in the rating with such a characteristic.

The main advantages:

• compliance in all parameters with the manufacturer's declared requirements;
• long resource and excellent cleaning quality.

Its minus appears only in comparison - the Mahle part has a more balanced design.

Review of the original Hyundai / Kia 26300-35503

The fourth line in the rating of oil filters was taken by the Hyundai / Kia 26300-35503 model. This variety is not meant for many Korean cars. Only the fourth place is given to it only because of the high cost of the original part, which is slightly inferior in quality to German or Asian counterparts.

An unreasonably high price can be suitable only for the most principled car owners who prefer to use exclusively original spare parts on their car.

But the Hyundai / Kia 26300-35503 filter has its own undeniable advantages:

• resistance to possible sudden temperature changes;
• guarantee of uninterrupted "cold start" of the motor;
• durable and reliable operation of the engine, but with timely vehicle maintenance.

The main advantage of the filter testers is the maximum compliance of the engine device with the calibration of the bypass valve. The downside is the unanimous ratio of price, quality and efficiency of the device.

Description Fram PH6811: comparative characteristics

SogefiFiltration, which produces filters under the Fram brand, completes the rating of manufacturers of oil filters for cars. From their huge assortment, products are supplied to the conveyors of the largest automotive concerns: Mercedes, Nissan, Honda, Peugeot, VW, LandRover, Audi, Ford, Mazda, Citroen and many others. Engineers of the company pay enough attention to the improvement of existing models.

The Fram PH6811 model deserves special attention. This proprietary variety is adapted to high temperatures - it can withstand up to 160 °, and it is also not afraid of high oil flows. The high quality of its workmanship did not go unnoticed, the rather large body - 80 mm. Nevertheless, one cannot count on good oil filtration with low resistance, despite the outwardly attractive features.

An essential part of the structure is diverted under the bypass valve. Therefore, not so much is allocated for the assumed large area for the filter element. But a large valve is not a disadvantage at all, but on the contrary, an advantage. The larger its size, the more precisely it can be adjusted. But everything is learned by comparison. If we take into account the same characteristics of the Mann device at a similar cost, then the choice becomes obvious.

An important detail when installing the filter is the O-ring. In the Fram PH6811 it is narrower than in the Mann and Mahle. This has its own plus - in the process of using the car, it will stick less to the mating plane and thereby facilitate the process of replacing the filter. But there is also a drawback - it is much easier to damage it. Therefore, during installation, you must not tighten the filter "with a margin", but you must act strictly according to the instructions.

The pluses still include good workmanship and assembly. Among the minuses were the non-ergonomic filter housing and its small filter element.

The main characteristics, as well as reviews of drivers who have already tested them, will help to determine which brand of oil filter is better to choose.

On modern cars, the oil filter is an integral and important part of the entire engine design. It is all the more difficult to believe that until the 20s of the last century, there were no cars at all. For this reason, the oil had to be changed every 700 - 2,000 km, and the resource of the engines of that time was small. The emergence of an oil filter made it possible to significantly increase the resource of engines.

It is all the more important to understand the role of this component in the design of the engine and to understand the principle of its operation. Therefore, one cannot do without a rating of the oil filter manufacturers on the market.

Purpose of the oil filter

Engine oil has important functions:

• creates an oil film between the cylinder liners and pistons, which reduces friction;
• reduces engine noise;
• cleans engine components from metal dust, carbon deposits and other things.

This means that the main task of the oil filter is the process of cleaning engine oil from various impurities (of a mechanical nature). During the operation of the car, the concentration of impurities in the oil grows, which is why it is transformed into an abrasive mixture, which negatively affects the operation of the engine.

Filter types

All oil filters are divided into 2 categories:

1. Collapsible.
2. Non-collapsible.

Non-separable filters are much more widespread, since they are compact, cheap and easy to install.

Video: Overview of 10 Oil Filters Part 1

Oil filter device and how it works

Non-removable filters consist of several main components.

1. Anti-drain valve

It is necessary to prevent the drain of engine oil into the crankcase from the oil channels and directly from the filter after the engine is stopped. This prevents air pockets in the lubrication system and ensures timely oil supply. The design of the anti-drain valve differs slightly depending on the manufacturer, but the most common option is a disc made of rubber, which closes the inlet channels in the filter housing.

2. Overflow valve

It is necessary to ensure the flow of oil into the motor if it is impossible to pass it through the filter element. The reasons for this can be different - clogging of the filter element, excessive viscosity of engine oil in severe frosts, etc. The valve is triggered when the maximum allowable oil pressure is reached. This value ranges from 0.55 to 2.6 kg / cm² and depends on the layout of the power unit.

3. Filter element

For its manufacture, as a rule, corrugated paper pre-impregnated with special resins is used. The paper itself has a porous structure, and high oil resistance and water resistance are achieved through impregnation. The paper is laid in the filter in a special way, which allows obtaining the largest filtration area and keeping within the small dimensions of the filter housing.

An alternative to corrugated paper is made up of different types of fibers - synthetic and cotton. However, they are not used as often.

4. Anti-drain valve

As a rule, this valve is completed with non-separable filters in combination with anti-drain or bypass filters. The anti-drain valve prevents oil from leaking out of the outlet during filter replacement.

Video: What's inside the oil filter? Overview of 10 Oil Filters Part 2

Filter types

Oil filters are divided into 3 types:

1. Full-threaded.
2. Partially threaded.
3. Combined.

1. Full-stream type

The algorithm for the operation of such a filter is to pass the flow of oil that goes from the oil pump through the main filter element. The oil then flows to the motor components.

2. Partial flow type

A feature of this type of filter is a much longer oil filtration process. This is achieved through the use of a 2-circuit system - while in one circuit, in the second it lubricates the engine components. Long-term cleaning is compensated for by the higher efficiency compared to full-flow filters, and there is still no possibility of a drop in oil pressure.

3. Combined type

As a rule, combined filters are used in vehicles intended for transportation, the construction segment and other areas where the intensity of operation is very high.

Rating of oil filter manufacturers

In this case, it is better to focus specifically on the manufacturer than on a specific product. The variety of filters is impressive, in addition, they are not universal and are designed for certain models (although many filters fit different cars of different brands). However, filter prices are not high and usually range from 300 rubles. up to 1,500 rubles for a non-separable product.

Bosch - Germany

It is not for nothing that the filters of this company are winning first places in all kinds of research. After all, the company is constantly working on its own products. In particular, filters from Bosch are characterized by the use of microfiber paper (phenolic) as a material for the manufacture of filter elements. Due to the large filtration area and porosity, excellent oil purification is guaranteed.

Filter housings with small notches, which make mounting and dismounting of the filter much easier. The increased size of the filters is also important, which increases their efficiency.

Mahle from Austria

According to the manufacturer, its filters are focused on preserving the environment. For this reason, the filter elements are made of special paper, and they are made in the form of a roll, which increases the cleaning efficiency. The filters are designed to work with synthetic and semi-synthetic oils. Oil leaks are eliminated by using a tight bypass valve. But for the release of anti-drain valves, soft rubber is used.

Mann from Germany

Filters of this concern are installed on many models of modern cars directly from the factory - Opel, Volvo, etc. production guarantees the highest quality products. The "highlight" of Mann filters is the use of powerful magnets in their design, due to which high efficiency and filtration speed are achieved. Special rubber cuffs provide a snug fit. Reliability and quality on top!

Filtron - Poland

This company has established the export of its filters to many countries - the EU countries, the USA, Russia and others. And the high quality is evidenced by the choice of filters from Filtron by the giants of the automotive industry - Volkswagen, Suzuki, General Motors, Mercedes and others.

Goodwill - UK

The main buyers of filters from this company are the European concerns Renault and Volkswagen. Goodwill products are valued for their high filtration quality, which is achieved through the use of paper impregnated with a special composition. Moreover, even high pressure and high temperature do not reduce the performance of the filters.

Fram - USA

It is already an American brand owned by SogefiFiltration. Its filters go to the lines of many auto concerns - Ford, Mazda, Volkswagen, Peugeot, Volvo, Honda, etc. The peculiarity of Fram filters is that they withstand temperatures up to 160 ° C.

Finwhale from Switzerland

This is already a cheaper and simpler product, it is not surprising that many owners of domestic cars buy Finwhale filters. Actually, there are no complaints about the quality of filtration, since high quality paper is used to create filter elements. In addition, reliable anti-drain valves prevent engine oil starvation. And the process of installation and dismantling is extremely simple. However, the resource of such filters is not long, therefore their use on cars for which the oil change interval is determined by the manufacturer at 15,000 km is not recommended.

Hengst from Germany

Filters of this company have been supplied to the assembly lines of many world auto concerns for more than half a century.

However, this list is not complete, because filters from other well-known companies can be seen on sale - NAFIL Filter Co (PRC), Fleetguard (USA), ASAS Filter Ind. (Turkey), PEKO Inc. Ltd. (Taiwan) etc.

Mechanics and auto experts advise buying oil filters only in accordance with the VIN code of the car, since even a complete match in parameters and threads does not guarantee effective operation. It is also necessary to change the filter (along with oil) in time. In addition, it will not be superfluous to shorten the replacement interval by 5,000 - 6,000 km, given the domestic operating conditions. Naturally, you need to beware of fakes and buy parts only from trusted sellers.

The oil filter is a very important component of any car engine. Despite the simplicity of the design, this element extends the life of the power unit at least three times, it simply cleans the oil, and also removes (I would say, accumulates) all the dirt from the engine (shavings, soot, carbon deposits, etc.) ... But many of you and I don’t know how it works, how it works. Today I will try to remove this gap, I will tell you “what and how”, of course there will be a text version, plus a video ...

If you want an oil filter, this is the liver of a car, it is he who collects all the harmful substances in the engine, which are uniquely formed during operation. If you think that the dirt simply has no place to come from, then you are mistaken, shavings arise in any case, from grinding metal parts, such as piston rings, crankshaft liners, valves, etc. Of course, the metal is very durable, and even oil lubricates it, but microchips still appear from increased speed, load and other things. Also, the temperature burns the oil, dirt begins to appear in the oil. All this also negatively affects the engine resource as a whole.

It is worth noting that if there was no oil filter, then the resource of the power unit would have decreased at least 2 - 3 times.

So to put it and most importantly change it in time! REMEMBER - the durability of the motor depends on this element, we can say directly.

Types of oil filters

It should be noted that on modern cars, the filter elements may not be the same. Now I do not mean the very principle of filtration, I mean execution.

May be:

• In a metal separate housing, these are usually screwed to the engine. They have their own body, independent of the power unit body. This is the most common type.

• Just a filter element or an immersion filter. It is installed in special "glasses" or as they call it "cups". That is, it is immersed there from here and the name. There is no body here, that is, the "cartridge" itself, which has collected dirt, changes. Such options also take place, but they are not so common, although recently more and more manufacturers are looking in this direction. This is because the "glass" can be made of plastic, but this is real savings.

We will not find out which option is better now, perhaps there will be a separate article, now I still want to talk about exactly how the filter element works, but first, let's think about what it consists of.

What is it made of?

Often we see a metal case that is made in the form of a cylinder. The upper part is just a dome, but the lower one has small holes in a circle, as well as a central one for threading.

But the filter element is not visible, it is inside.

To be honest, the oil filter element is a very simple design, all the main work is done by special paper, which works as a filter. It is located inside our cylindrical body, it is banally locked there.

There are also two valves - an anti-drain valve (which prevents oil from leaking out of the filter) and a bypass valve (it relieves pressure when the oil is cold and cannot filter through paper normally).

Here is the whole device, let's repeat it again:

• Filter element, usually special paper
• Two valves, bypass and anti-drain
• Cylindrical, metal housing
• The lower part with special holes through which dirty oil comes in and clean oil is supplied, also the central hole also serves for fastening (threads are cut in it)

Separately, it is worth mentioning the submersible version, there only the filter itself (that is, the paper cartridge) changes, as well as the sealing gum.

How does it work?

The principle of operation is simple. Dirty oil enters through small holes that go in a circle, it is pumped there by an oil pump, which pumps lubricant from the engine sump. Then it "folds" the anti-drain valve and passes into the cavity between the paper and the filter element. It is worth noting if the anti-drain valve does not work as it should, or it breaks (collapses), you have. Follow the link, in that article we examined the problem in detail.

If the grease is hot, that is, it has warmed up from the engine, then it begins to filter through the paper, particles of dirt, shavings, etc. remain on the paper.

If the grease is cold (especially in winter), then its throughput drops significantly, because it is thick and cannot properly pass through the paper part. Therefore, the bypass valve opens, it opens only when the pressure in the filter rises above 0.8 atmospheres. And the oil goes through it.

After warming up, to + 60, +80 degrees Celsius, the lubricant becomes liquid and is already capable of seeping (filtering) through the surface. Therefore, the bypass valve closes and the filtration process is complete.

After filtration has occurred, clean oil is discharged into the central main hole and then enters the engine.

Can I not change the filter when changing oil?

NOT! It must be changed! Why? YES very simply, for an interval of 10 - 15,000 km, the oil filter is heavily clogged with all sorts of pollution elements. Its surface is simply clogged, if it is not changed, it turns out that the filtration process falls, which can lead, after 20,000 km, to. THIS IS VERY BAD!

The list of maintenance work on the vehicle as a separate item includes the replacement of oil and filter elements in the (ICE). The oil filter is essential for the stability of the vehicle. Thanks to the installation of a new filter, the pressure in the lubrication system of the power unit is normalized, which significantly affects the overall resource of the car. When replacing the oil filter, various harmful accumulations of used oil, metal dust, wear products of working elements, etc. are removed from the engine crankcase.

Why is the engine oil filter replaced

It is known that when replacing a lubricant in a car engine, the filter device is simultaneously replaced. This is necessary because the new grease has a lower viscosity than the old one. When it passes through the elements of a dirty filter, the accumulated dirt is washed out and dissolved in a new composition, which is unacceptable.

By the nature of the contamination and the general appearance of the removed filter, experienced craftsmen determine how worn out the working parts and components of the power unit. If, after replacing the lubricant and oil filter, the engine performance has changed significantly, it can be concluded about the degree of serviceability of the engine.

Description of the design of the oil filter

The filtering mechanism is designed for high-quality cleaning of engine oil from harmful impurities in order to ensure the stability of the operation of the internal combustion engine and the car as a whole. Its design includes the following components:

1. Metal body in the form of a cylinder with a special cover.
2. Filter element (as a rule, it is porous paper of a special texture).
3. Check valve.
4. Anti-drain valve (prevents oil from entering the engine after it stops).

Best Oil Filters for Automotive Engines

To keep the vehicle safe, drivers choose oil filters based on personal preference. Some consumers like the models of certain brands, while others study the materials of the ratings before buying a filter. We present a list of popular positions that stand out in terms of technical properties and performance:

1. Mahle OC205 (Austria).
2. Mann W75 / 3 (Germany).
3. Bosch 0451103316 (Germany).
4. Hyundai / Kia 26300-35503 (Korea).
5. Fram PH6811 (Netherlands).
6. Finwhale LF101 (Germany).
7. BELMAG (Russia).
8. BIG FILTER (Russia).
9. GOODWILL (UK).
10. SCT (Germany).

The versatile, durable Mahle OC205 filter device is easy to use. The seat of the device ideally matches the installation location.

Mahle OC205 oil filter is widely used in vehicle models:

• BEDFORD;
• FORD;
• FIAT-HITACHI;
• HYUNDAI;
• KIA MOTORS;
• ISUZU;
• LOTUS;
• KRAMER;
• MAZDA;
• OPEL;
• PROTON;
• MITSUBISHI, etc.

The thickened walls of the body part do not deform, withstand increased pressure during cold start. Consumers note the reliability, durability of the bypass valve (withstands a pressure difference of 1 bar). Thanks to high quality materials and excellent technical properties of the anti-drain valve, the internal space of the engine is protected from the penetration of contaminated lubricant.

The Mahle OC205 filter device is a common heading. It can be purchased at specialized outlets in the automotive market.

Ideal for powertrains with synthetic base oil.

Note: The Mahle OC205 oil filter is not recommended for use in machines that use inexpensive semi-synthetic or mineral lubricants. This is especially harmful for the working elements of the motor when the cold engine is turned on in winter at subzero ambient temperatures.

Best Innovative Model - Mann W75 / 3 Oil Filter. Experienced auto mechanics recommend using this device when running in vehicles with new, unworn internal combustion engines. Mann is known as a manufacturer of consumables and filter units for vehicles assembled on conveyor lines. Thanks to the use of innovative solutions, Mann W75 / 3 oil filters favorably differ in technical and operational characteristics from numerous analogues.

In contrast to the previous position, the response pressure of the bypass valve is slightly higher at 1.3 bar. The dimensions of the W75 / 3 are inferior both in height and in outer diameter. Due to the relatively small area of \u200b\u200bthe filter elements, there is a lower efficiency of the device. Most often, the MannW75 / 3 oil filter is recommended to be mounted in a car with power units that have minimal wear, where a synthetic lubricant of a relatively low viscosity is used.

Mann filters reliably protect the engine from debris accumulation during the entire period between oil service changes. Auto mechanics appreciated this model for ease of use - when replacing, the process of dismantling and installation is greatly simplified.

Application:

• DACIA LOGAN;
• MITSUBISHI CARISMA;
• NISSAN PRIMERA;
• OPEL ARENA;
• RENAULT LAGUNA etc.

Oil filters for cars from the German company Bosch are popular among car owners due to their numerous advantages. The surface of the porous filter elements of the increased area is distinguished by a unique texture based on phenolic microfibers. With the help of the Bosch oil filter 0451103316, harmful components are eliminated that negatively affect the stability of the operation of the power unit:

1. Soot deposits.
2. Oil combustion products.
3. Water drops, steam.
4. Metal dust, tiny particles and other wear products.

Due to the effective retention of a large number of the smallest foreign fragments in the engine oil, the oil filter prevents premature wear of parts and assemblies of the internal combustion engine.

Bosch device 0451103316 is equipped with high quality sealing elements, the mating parts of the structure are tightly fitted to each other. Thanks to this, the refined oil is effectively separated from the contaminated one. The device is characterized by increased resistance to sudden changes in temperature conditions, provides a quick start of the engine on a cold one. The overflow valve operates at a differential pressure of 1 bar.

With timely maintenance and regular oil changes, internal combustion engines complete with Bosch oil filters 0451103316 work stably during the declared operational life.

Application area:

• FORD ECONOVAN van (KAA);
• FORD ECONOVAN (KBA, KCA);
• HONDA ACCORD III (CA4, CA5);
• HONDA ACCORD IV (CB);
• HONDA ACCORD III Aerodeck (CA5) etc.

Hyundai Kia Oil Filter 26300-35503

The fourth ranking position is occupied by the Hyundai Kia 26300-35503 model. The Korean-made oil filter has a relatively high cost in comparison with previous samples. This is because only original spare parts are used in its production.

The main advantages of this position:

1. Increased resistance to sudden temperature changes.
2. Cold start of the engine for a short time.
3. Stability of the power unit with regular maintenance with engine oil change.
4. Reliability of the bypass valve.

Most often, the Hyundai Kia 26300-35503 oil filter is installed on the following vehicles:

• AZERA;
• ACCENT;
• CARENS;
• CEED;
• COUPE;
• CERATO;
• ELANTRA;
• HYUNDAI;
• GETZ;
• MATRIX;
• OPTIMA;
• SOUL;
• SPORTAGE;
• SOLARIS;
• SORENTO;
• TUCSON, etc.

Description of oil filter Fram PH6811

The largest automakers Mercedes, Honda Nissan, VW, Peugeot, Audi, LandRover, Ford, Citroen Mazda, and others use Fram oil filters for their cars. The Fram PH6811 model has proven itself well when operating at elevated temperatures (up to + 160 ° C) and engine oil pressure in the engine lubrication system.

Filter dimensions:

1. The outer diameter is 76 mm.
2. Case height - 80 mm.

Unlike previous designs, here the main structural element is a large bypass valve. Due to the increased dimensions of the valve, it lends itself to more precise adjustment. The area of \u200b\u200bthe Fram PH6811 filter element is significantly reduced.

The Fram PH6811 oil filter is popular with auto mechanics for its easy replacement process. The O-ring of the filter is in the form of a narrow part, therefore it is not welded to the installation site during operation.

Tip: In order to avoid damage to the O-ring when replacing the Fram PH6811 oil filter, it is recommended to fix this part with a minimum tightening torque (do not tighten too much).

A distinctive feature of Grunntech AG products is a relatively short service life (designed for about 15,000 km of run). Finwhale LF101 oil filters are no exception. However, despite this gripe, the products are popular among fans due to their numerous advantages:

1. Low price for the company's finished products.
2. High efficiency of oil filters (high-quality cleaning of lubricants, thanks to the use of high-quality filter paper).
3. Versatility (the produced models are suitable for cars of various brands).

Finwhale LF101 oil filter elements are manufactured under strict quality control throughout the manufacturing process.

Application area:

• Skoda;
• Hyundai;
• Renault;
• Ford;
• GAZ, etc.

Oil filters "Belmag"

Relatively inexpensive filters from the Belmag company in the city of Magnitogorsk are widely used due to their high quality, excellent technical and operational characteristics.

The main advantages of the product:

1. Large selection of models of oil filters for cars of various brands.
2. High quality of Belmag products.
3. Relatively low cost of goods.
4. Availability of purchase in the Russian car market.

Most often, economy-class oil filters from Belmag are installed on the following cars:

• VAZ "Priora";
• Grant;
• Kalina;
• Renault;
• Nissan, etc.

The eighth place in the rating of oil filters for automobile engines is occupied by the domestic model Big Filter. Most often, filters from a Russian manufacturing company are installed on VAG models (for example, at the Volkswagen plant in Kaluga).

The product range includes many types of oil filters. During the manufacture of filtering mechanisms, a thorough quality control of products is carried out at all production stages. The tightness of the filter valves is controlled by the finished product. The main design requirement is to ensure tightness when the engine is stopped (preventing engine oil leaks).

Many vehicle owners install Big Filter oil filters on their cars instead of the standard ones at the very first oil change.

GOODWILL (UK)

Automobile oil filters GOODWILL of a well-known English company are often found on the shelves of stores in the Russian car market. The company's products are presented in all price categories for both expensive and economy class cars.

Technical characteristics, service life of GOODWILL oil filters are in direct proportion to the frequency and quality of vehicle maintenance.

Factors affecting the stability of the filter elements:

1. Intervals between engine oil changes.
2. Oil type (synthetic or semi-synthetic).
3. Operating conditions and driving habits.

Notes to the manufacturer: Often car owners express dissatisfaction with the insufficient range of GOODWILL.

German oil filter SCT Germany

The products of the German manufacturer Mann are popular in the Russian car market and in the CIS countries. The oil filters of the German company are receiving positive feedback from Russian consumers.

The main advantages of SCT Germany:

1. Relatively low price.
2. Availability of purchase (you can buy at any specialized outlet in Russia).
3. Excellent engine oil filtration.

The main disadvantage: High percentage of the likelihood of premature failure. It often happens that some SCT filters break before their stated service life. This is the reason for the location of the SCT Germany model at a lower step in the ranking.