If you are going to implement a license plate recognition system, then you must know about all the possibilities and use the system at 100%. And so what tasks do modern license plate recognition systems cope with?
Access limitation
Probably the most common reason for installing license plate recognition systems. Not everyone is allowed to enter many territories, and license plate recognition systems are one of the most convenient and inexpensive ways to restrict the access of unwanted vehicles.
Organization of paid access for cars
This can be paid parking in shopping and business centers, parking for storing cars at night, it can be intercepting parking and many others.
The license plate recognition system for the purpose of organizing paid parking can not only provide the ability to identify entering and leaving vehicles, but also automate the payment process.
Vehicle traffic management
At many urban infrastructure facilities, there is a need to allow authorized vehicles to enter a particular territory.
It can be cars of special services - police, ambulance, Ministry of Emergency Situations, it can be cars of city services that clean streets or collect garbage, in a word, transport serving urban infrastructure.It can be cars used by passengers - buses and minibuses, ordinary taxis, cars of car-sharing companies.
With the help of license plate recognition systems, you can flexibly configure access levels and create territories into which only certain types of transport are allowed to enter.
Managing the time spent by a vehicle on the territory
In many cases, there is a need to limit not the entry itself, but the time spent on the territory of the vehicle. This may be in demand at airports, train stations, metro stations, transport hubs, intercepting parking lots, and adjoining territories.
Registration of vehicles
Sometimes you just need to register all the vehicles leaving and leaving. This can be useful when, for example, collecting statistics that allows you to analyze transport congestion.
Vehicle tracking is on watchlist
The system can track the appearance of vehicles and a specially created watch list for this purpose and issue an alarm signal when they appear.
Types of license plates used in Russia
This is perhaps the first thing you need to decide on, cars with what types of numbers can call into your territory. There are often many more of these types than you might imagine. Not all systems for recognizing auto numbers support all existing numbers, moreover, in many cases, the more types of numbers the system has to work with, the more expensive the system will be. Briefly about the types of state license plates can be found inWikipedia , and exhaustive information in the text of the state standard of the Russian FederationGOST R 50577-93 "Signs of state registration vehicles. Types and main dimensions. Technical requirements".
License plate recognition hardware systems
Hardware recognition systems have appeared relatively recently, and have many advantages over classical software systems. And the main advantage is the price! All you need to get a working parking permit system is CCTV cameras and a barrier. It's hard to believe, but it is.
The distributed structure allows it to remain operational even if the central server breaks down, which, by the way, may not exist at all. The load on the local area network is minimal, because image processing is carried out directly by the camera processor and the results of processing the video stream are sent to the server.
1. HikVision
A solution from the world's largest company, the market leader in video surveillance and security systems. License plate recognition is supported by all cameras of the 4th series DS-2CD4xxx Smart-IP, currently there are 41 cameras.
- Developer: Hikvision Digital Technology ... Official site:www.hikvision.com. The address: China, Hangzhou, No.555 Qianmo Road, Binjiang District
First option
You use only the camera, with the help of the browser you connect to the camera and create a database of permitted numbers, when the car passes, the camera will independently control the barrier, if the car is in the white list, then open it, if there is no such number, then it will leave it closed.
The peculiarity of this option is that travel data, such as the time or direction of travel, is not saved, which means that you will not have the opportunity, for example, to establish who and when passed through your barrier, or to generate reports.
The disadvantages of this recognition system can be attributed to the fact that in order to form "black" and "white" lists of car numbers you will have to perform all actions on each camera, if there are a lot of cameras, then it can be a rather long drive, plus you need a lot of care to base with the lists of license plates were absolutely identical.
Hikvision smart cameras support license plate recognitionSecond option.
2MP Smart IP Camera DS-2CD4025FWD-AP -price 34 990 rubles
2MP Smart Dome IP Camera DS-2CD4125FWD-IZ -price 36,990 rubles
3MP Smart Dome IP Camera DS-2CD4135FWD-IZ -price 42 990 rubles
License plate recognition also occurs on board the camera, but the camera sends the recognized data to a smart video recorder, where a database with statistics of all passes is kept. And what is no less important is the database itself with lists of "black" and "white" car numbers, which is formed once in the software interface of a smart video recorder.
4-channel network video recorder HikVision DS-7604NI-E1 / 4P -price 11 990 rublesExclusive video webinar - detailed analysis from the Hikvision engineer
Hikvision DS-7616NI-E2 16-Channel Network Video Recorder -price 15 990 rubles
16-channel network video recorder HikVision DS-7716NI-E4 / 16P -price 33,990 rubles
2... Axis
Thanks to the open platformAxis Communications - ACAP, third party developers can develop applications to install them directly on the IP camera. This is exactly how the ability to recognize license plates in Axis cameras is implemented.
License plate recognition software developer companyFF Group , has developed an application that can be installed on an Axis camera.
The application is free, or rather it would be more correct to say it is included in the price of the camera. At the moment it is adapted for the countries of the European Union, CIS, Israel and Turkey.
- Developer: Axis. Official site:www.axis.com. The address: Sweden, Lund, Emdalavägen 14, SE-223 69
3.
NedAp
Solution from the Dutch company NedAp
- Developer: Nedap Security Management ... Official site:www.nedapsecurity.com/ru ... Address: Netherlands, Grunlo
Nedap ANPR Access license plate reader -price 204 149 rublesVideo - ANPR Access NedAp
Nedap ANPR Access HD license plate reader -price 266,013 rubles
4. Beward
The solution from the Russian manufacturer Beward 2 MP IP-camera B2230L is an autonomous vehicle access control system. Thanks to the built-in license plate recognition, the camera is installed next to the barrier and controls it itself. Thus, there is no need to purchase additional software, servers or licenses. Everything you need is already present in the model, and the cost of the final solution for license plate recognition is already included in the price of the camera and will not require additional costs.
Autonomous vehicle access control system
The B2230L IP camera contains a list of license plates that are allowed to enter. Editing the list is available through the WEB-interface. When a license plate from the list is found in the frame, it gives a signal to the alarm output, which can be used to control barriers, gates and other car access restriction systems without any additional equipment.
- Developer: Beward. Official site:www.beward.ru ... Address: Russia, Moscow
License plate recognition software
Software recognition systems first appeared on the Russian and world markets, in the 90s, the advantage of this approach is the huge video cameras, the price for the camera is lower than in the case of smart cameras with built-in recognition functions. The downside will be the high cost of the server on which the license plate recognition software is installed, the high load on the local network. In the event of a server failure, the entire system loses its functionality.
1. Traral-Parking
The license plate recognition system is based on small-sized ready-made modules “Tral-Parking 2”, consisting of an analog video camera and a controller that processes the image, checks license plates and opens executive devices connected to its relay outputs. There are two types of modules implementation - you can purchase a finished product in a sealed case with an IP66 protection level, or simply buy a controller with a camera to install at your discretion.
- Developer: SMP-Service. Official site:www.tral.ru ... Address: Russia, Moscow
Video review - Tral-Parking 2
Travel events contain the following information: Photo of the car with its state registration plate, travel time, travel direction, the fact of license plate recognition and its belonging to a certain group.
The workstation is used to view video from points of travel, edit the list of license plates, transfer them to the memory of controllers and to store an archive of events, and there is no other way to work with recognition modules. The system recognizes with a probability of up to 92% only Russian civilian numbers, the system's reactions to events are not provided.
System requirements for installing the software module - OS Win Vista, 7 32 and 64 bits.
2. NumberOk
The hardware and software complex "NumberOk" is designed for license plate recognition and control of executive devices.
The module allows with a probability of up to 97% to recognize vehicle state registration plates of the Russian Federation, the Republic of Belarus, Ukraine, Israel and most European countries.
- Developer: FF-group. Official sites:www.avtonomerok.com, www.ff-group.org ... Address: Ukraine, Kiev
The module works with both IP and analog video cameras, control of external devices is carried out using relay controllers "Barbos" and ICP CON PET-7060, and the controllers can not only issue control signals, but also receive them from other devices (photocells , induction loops and other devices, the type of output signal of which will be clear to the controllers). The interface for working with controllers is built into the main software. The number of cameras simultaneously connected to the recognition module is limited by software to 8.
The module implements two options for working with the database:
- SQLite database server - the database and the recognition module are installed on one local computer, which implies autonomous work;
- Firebird database server - several terminals with a recognition module work with one database, which can be stored on any of them, while there is no separate client part, i.e. for remote administration it is required to install additional software “Numberok”. In this version, communication with the database server is ongoing. The number of terminals with a recognition module working with one database is unlimited.
Video review - "NumberOk"
Interface capabilities
The module has an alarm event setting for an individual number or a group of numbers, an alarm event can be:
switching on any external device through the relay outputs of the controllers
The module does not support manual correction of the vehicle license plate, there is a function of ignoring one or several unrecognized characters in the license plate.
System requirements for installing the module
Win 7, 8, S2013 32 and 64 bits, recommended technical requirements for the workstation (we are considering installing the module for 4 recognition channels) - Intel® Core ™ i5-6400, RAM 8 Gb, Radeon HD 7750, system SSD 120 Gb, HDD 4 Tb.
Integration with ACS
Gate ACS - the essence of the overall integration solution is simple: the license plate recognition server with NumberOK v.2 software does not make any decisions on its own, but only recognizes the car number and transmits the recognized number as an identifier directly to the Gate-8000 Auto controller. Thus, the recognition server becomes for the Gate controller, in fact, an ordinary identifier reader. At the same time, all operation of the access system is carried out in a regular mode according to standard scenarios and the principles of a classic ACS. The license plate is used in the access system as an independent identifier, and not in coded form, but directly in the explicit form of the license plate. This provides significant convenience for both users and the operation service when entering identifiers into the database, analyzing access events and generating the required reports. If you add to this integration kitvideo surveillance software Line , it becomes possible to link the video to the event of the car's passage, while installing all these three - NumberOk, Gate, Line, can be on one computer, but you should take into account the requirements for software compatibility with the type of operating system.
- Gate Controllers - price from 5 183 rubles
- Gate software -price from free to 35 512 rubles
- Sphinx controllers -price from 10 700 rubles
The module provides for the generation of reports of two types:
General reports - all recognition events generated by the selected filters:
- By time period
- By group or individual number
- By channels and by zones of recognition
- By number or part of a number
- In the direction of travel
- By description
2. Consolidated reports:
- "Recognition" mode. The total number of cars passed,
grouped by channel / zone and direction of travel
- "Checkpoint" mode. The total number of vehicles passed, grouped by direction of travel and by access.
For convenience, these reports can be presented in Excel format.
3. iPera EX-LPR
The EX-LPR license plate recognition module is a joint development of specialists from iPera and Exacq Technologies Inc., is a client application for the ExacqVision video surveillance system and is designed to automatically recognize and register all license plates that come into view of the video camera. The module requires exacqVision video surveillance software installed; for a small system, all software can be installed on one computer
A feature of this module at the current time is that the search for license plates is carried out over the entire frame size, and not in its specific area, set when configuring recognition modules from other manufacturers - this makes its own adjustments to the requirements for the computing power of the computer equipment used.
- Developer: iPera. Official site:www.ipera.ru ... Address: Russia, Moscow
The number of cameras simultaneously connected to one recognition module is limited only by the hardware capabilities of the equipment used, for the convenience of selecting equipment, taking into account the sufficient speed of the module, the developers recommend using one processor core per recognition channel (the operating frequency will depend on the resolution of the camera used).
So far, only alarm outputs of video cameras are used to control actuators in case of autonomous operation, but the module has broader integration capabilities, which can be found in the Integration section.
Client connections
EX-LPR recognition module is a full-fledged server-client application based on the MySQL database server. The database can be stored on any computer or server that has a MySQL server installed and can be accessed over the network. All client connections are free and have no restrictions on their number, user rights are distributed to each user separately and in the required amount. Through this connection, you can view events, configure the system, edit lists of numbers, create reports.
The second type of client connection implemented by the developers is the web interface.
System requirements for installing Exacq products - OS Win 7, 8, Ser2003Rev2 32 and 64 bits, recommended technical requirements for the workstation (we are considering installing the module for 4 recognition channels of the parking version) - Intel® Core ™ i5-6400, RAM 8 Gb , Radeon HD 7750, system SSD 120 Gb, HDD 4 Tb.
4. CVS-Auto
The CVS Auto system was developed by the specialists of the "New Technologies" company, is a client application for the main program of the CVSCenter video surveillance system and is intended for automatic recognition and fixation of license plates in the field of view of a video camera. The module requires the installed video surveillance server software; if necessary, the entire set of programs can be installed on one computer.
- Developer: New Technologies. Official site:www.cvsnt.ru ... Address: Russia, Moscow region
The number of connected recognition cameras to the workstation is limited in the case of installed CVS Auto software to 4, if CVS Auto + is used - their number can reach 8, but several copies of CVS Auto + can be run on one computer. The program supports both IP and analog video cameras. The methodology for selecting cameras for working with the recognition module can be found here. To control external devices, the developer presented the CVS-DIO controller, with its help you can also receive signals from sensors or other external devices to implement complex work algorithms. The software for working with the controller can be found here.
Interface capabilities
The module provides for the possibility of manual correction of the vehicle number, the fact of which will be displayed in the event log as an adjustment.
The reaction of the system can be configured for an individual number, a group of numbers and a type of numbers (template).
Video review - "CVS-Auto" interface
The reaction of the system can be:
- text information of any content (delay, inspect, skip, etc.)
- sound signals (a separate sound file can be configured for each event)
- light indication (signal lamps or LEDs are connected to the controller)
- turning on any external device
The module implements the ability to identify a vehicle - when entering a car number into the database, its photo is added (one picture can be used). Additional textual information about the car may contain - make, model, color of the car, owner's name, contact information
In the process of recognition, this information, together with the image, can be displayed on the operator's monitor.
System requirements for the installation of all CVS products - OS Win 7/8 / S2010 32 and 64 bits, recommended technical requirements for the workstation (we are considering installing the module for 4 recognition channels of the parking version) - Intel® Core ™ i5-6400, RAM 8 Gb, Radeon HD 7750, system SSD 120 Gb, HDD 4 Tb.
Client software
The module implements two options for working with the database:
- option 1 - (CVS-Auto version) the database and the recognition module are installed on the same local computer, which implies autonomous work without the possibility of client connections;
- option 2 - several terminals with a recognition module work with one base, which can be stored on any of them or on another external server (version CVS-Auto +). In this version, communication with the database server is ongoing. The number of terminals with the recognition module in the network, as well as client connections for the database operator, is unlimited.
User rights to client connections are distributed by the database administrator in the required amount for each individual user - viewing archives, viewing in real time, administering lists, groups, creating reports. The number of client connections is not limited and they are all free.
Reports
The module can create reports by - recognized, unrecognized license plates, a separate number, their group or template; entered or exited vehicles; numbers manually adjusted by the security operator; vehicles that are prohibited from entering, but allowed by the security operator; points of travel, cameras; events for a time interval; time spent on the territory, the list of those on the territory.
5. AutoTRASSIR
The program for automatic recognition of automobile state registration plates Auto-Trassir is one of the pioneers in the line of domestic products in this direction, created by the developers of the Russian company DSSL, is a client application of the Trassir video surveillance system, is designed for automatic recognition and registration of automobile license plates and differs (not only in the opinion of the developers ) simplicity of the working interface and settings.
- Developer: DSSL. Official site:www.dssl.ru ... Address: Russia, Moscow,Recommended cameras list for AutoTRASSIR.
The maximum number of cameras connected to a workstation with a recognition module is not limited, a software key for the required number of cameras is supplied on request, but remember that the recognition module works with a large amount of information, and excessive load by cameras will reduce its operation speed (this applies to any module where image processing algorithms are present). The module supports IP and analog video cameras. A list of recommended camcorders can be viewed here.
In stand-alone mode, a controller is used to control external devicesNetPing I / O v.2 with relay outputs for controlling external devices and digital inputs for receiving signals from sensors and other devices. For its operation, additional paid software is installed.
It is also possible to use the alarm outputs of video cameras, but only to control external devices.
Client software
The module has two options for working with the database. In the first version (version of the SQLLite DBMS), the database and the recognition module are installed on the same local computer without the possibility of client connections, which implies autonomous operation. In another variant, several terminals with a recognition module work with one database, which can be stored on any of them or on some external server (PostgreSQL version). In this version, communication with the database server is ongoing. Connection via the web interface is not available.
User rights for free client connections are distributed by the database administrator in the required amount and for each user, the number of client connections is not limited.
Interface capabilities
In case of incorrect recognition, the module provides for the possibility of manual correction of the vehicle number, such an action will be displayed in the event log as an adjustment.
In the system there is a setting of alarm events for a separate number or a group of numbers. All possible system reactions are programmed in a special section “Auto-Tracer rule system”.
The reaction of the system can be - text information of any content (delay, inspect, skip, etc.), sound signals, light indication (signal lamps or LEDs are connected to the controller), turning on any external device, sending messages to external systems (for example, sending SMS messages to the specified numbers using the SSMP protocol).
Video review - Auto Trassir
In order to objectively identify the car, the following information can also be added to the database - brand, color, owner's full name, contact information.
Based on the recognition results, this information can be displayed on the workstation monitor.
System requirements for installing the module - OS Win 7.8 32 and 64 bits, recommended technical requirements for the workstation (we are considering installing the module for 4 recognition channels of the parking version) - Intel® Core ™ i5-6400, RAM 8 Gb, Radeon HD 7750, system SSD 120 Gb, HDD 4 Tb.
Integration with ACS systems
The module has integration with the domestic access control and management system Sphinx. There are two versions of the integration - the first was written by the Trassir developers, the second - by the Sphinx developers. Here we take a look at the version written by the Sphinx developers (as we understand it). The level of integration implies the use of the Auto-Trassir module as a source of identifiers (automobile license plates), decisions about the vehicle's passage are made by the ACS system (the database of automobile license plates is stored in it).
- Sphinx controllers -price from 12 510 rubles
- Sphinx software -price from free to 31 800 rubles
6. Orion-Auto
Orion-Auto has a full-fledged server-client hierarchy of system construction, the entire database (automobile license plates, events, photographs of vehicles, etc.) can be stored on any terminal or on another external server where the database server is installed. The entire software package can also be installed on one workstation. The number of cameras connected to the recognition module is limited to 64 (to connect more than 4 cameras, a request for the supply of the corresponding key is required).
- Developer: NVP "Bolid" Official site:www.bolid.ru ... Address: Moscow region, Korolev
System requirements - OS XP, 7, S2003r2, recommended technical requirements for the workstation (we are considering installing the module for 4 recognition channels of the parking version) - Intel® Core ™ i5-4460, RAM 8 Gb, Radeon HD 7750, system SSD 120 Gb , HDD 4 Tb.
The rights to client connections are distributed by the database administrator in the required amount - viewing archives, viewing in real time, administering lists, groups, creating reports. The number of client connections is limited only by purchasing a license for the required number.
7. SpecLab-Traffic
The SpecLab-Traffic recognition module was developed by one of the recognized leaders of the domestic market by the Spetslab company, it is a client application for the Goal-City Cassandra video surveillance system and is designed for automatic recognition and fixation of license plates that come into the field of view of a video camera. For the module to work, the installation of the Goal-City Cassandra server is required (or, according to the developers, any third-party video server), from the list of cameras connected to this server, those that will be used by the license plate recognition module are selected.
- Developer: Spetslab, Official site:www.goal.ru. The address: ivanovo, st. Construction, 17
If necessary, the entire software package can be installed on one computer.
You should pay attention to the wide functionality and a large range of intelligent modules presented by the developers - on the basis of Spetslab products, interesting multifunctional security systems can be designed.
Hardware
The maximum number of cameras connected to the recognition module is limited by the technical capabilities of the workstation, there are no other restrictions. To work with the module, you can use IP and analog video cameras. The list of integrated IP equipment can be found here. The general method for selecting cameras is practically the same as the recommendations of other manufacturers of similar software, but the possibilities for installing video cameras for the SpecLab-Traffic module are somewhat different.
To control external devices and receive signals from sensors in the system, you can use a very functional IP controller "Telepatya", to work with it, additional paid software SLDA server and its own security logic language S ++ are installed, with the help of which the algorithms of operation of all devices are configured.
Interface capabilities
In case of incorrect recognition, the module implements the function of manual correction of the number by the security operator, such an action will be displayed in the event log as an adjustment. It is possible to set an alarm event in the module for a separate number or a group of numbers, such an event can be:
text information of any content (detain, inspect, skip, etc.)
sound signals
light indication (signal lamps or LEDs are connected to the controller)
In order to objectively identify the car, the following information can also be added to the database - brand, color, owner's full name, contact information. Based on the recognition results, this information will be displayed on the monitor screen.
In order to improve the safety of paid parking lots, the developers have written a “safe exit” algorithm, which is no longer used by anyone, the essence of which is to compare the images of the vehicle and its owner obtained at the entrance of the vehicle with the vehicle actually leaving. For this purpose, an additional video camera is used, which is installed in a place convenient for shooting, and any vehicle presence sensor (magnetic loop, photocell) to turn it on at the right time.
System requirements for installing the entire set of Goal software - OS Win 7 and S2008r2 32 and 64 bits, recommended technical requirements for the workstation (we are considering installing the module for 4 recognition channels of the parking version) - Intel® Core ™ i5-4460, RAM 8 Gb , Radeon HD 7750, system SSD 120 Gb, HDD 4 Tb.
Client software
The module implements client connections using a web interface and a database server. Connection using the web interface only allows viewing lists of numbers and video recordings of events from any computer or mobile device with a browser and Internet access. Connecting via a DBMS allows you to view all the necessary information and configure the system. All types of client connections are free and have no restrictions on their number. The rights to each user of the system are assigned in the required amount.
The module can work both with its own and with external databases (for example, the search databases of the traffic police), there is special software for this.
Integration with ACS systems
The SpecLab-Traffic recognition module currently does not have integration with third-party manufacturers of access control and management systems.
8. Automarshal
Automarshal is a standalone application developed by Mullenom Systems Research and Production Company, designed for automatic recognition and registration of automobile license plates. It is offered in two versions - for highways (speed up to 150 km / h) and for parking lots or checkpoints (speed up to 30 km / h).
The application has a number of paid and free add-ons (plug-ins) to expand the functionality, for example, the "Parking" plugin will help to fully automate any parking, including paid ones.
- Developer: Mullenom Systems. Official site:www.mallenom.ru ... Address: Russia, Cherepovets
The maximum number of video cameras (recognition channels) connected to one workstation with a recognition module is 16. To control external devices, the developer suggests using an impressive range of controllers - ICP DAS USB-2060, ICP DAS ET-7060, Advantech USB-4750-AE, Advantech USB -4761, ICP DAS USB-2055, ICP DAS ET-7044, Moxa ioLogik E2212. To work with controllers, you need to purchase and install a paid module for interaction with external devices.
Integration
The vehicle license plate recognition module has functional integration with the Gate access control and management system - from the ability to work with Gate 8000 series controllers in an autonomous version and ending with the joint work with the Gate system as part of an integrated security system. The level of interaction between Automarshal and Gate is impressive, all information about it can be found here.
9. Macroscop-Auto
Within its analytical package, Macroscop company uses the license plate recognition module Macroscop-Auto, developed by the Kiev company VIT (Video is a client application of the Macroscop video surveillance program and is designed to automatically recognize and fix license plates that have come into the field of view of a video camera. The module has two types of performance - version for highways (vehicle speed up to 150 km / h) and version for parking (vehicle speed up to 20 km / h). If necessary, all software can be installed on one workstation - video surveillance server software is installed, all cameras are configured in it , then the Macroscop-Auto module with the database server is installed and those that will be used for license plate recognition are connected to it by software.
In the case of several terminals operating in the same network (we remind you that it must have a video surveillance server to which all used video cameras are connected), the database and the event log are stored on any server or terminal, the client-server connection must be constant.
- Developer: Macroscop, Official site:www.macroscop.com. The address: perm, Kosmonavtov highway, 111, building 27, office 301
The maximum number of cameras connected to one workstation or server with a recognition module is limited by technical characteristics, taking into account the type of module used (highway or parking version), there are no other restrictions.
The module is mainly focused on working with IP cameras, the supported list of which can be found in this section, but it is possible to use analog video cameras, the connection requirements for which can be found here.
Controllers can be used to control external devices and receive sensor signals in the systemNetPing I / O v.2 or UniPing v3 , for this purpose, additional paid software is installed in the recognition module and the operation algorithm of all devices is configured.
Client software
There are two types of client software for the recognition module - a web interface and a database server software client.
Through the web interface, you can only view any information - video archives, base numbers, events, etc. (there is a version of the application for the web interface for mobile devices based on iOs, Windows mobile and Android).
Connection via a client to the database server allows both viewing and configuring the system in full.
The number of one-time client connections is not limited, all connections are free. Rights and authorities for client connections are assigned to each user separately to the extent required.
Video review - Macroscop Auto
Interface capabilities with incorrect recognition
In case of incorrect recognition of the manual number correction in the Macroscop-Auto module there is no, the unrecognized number will be offered for saving in the database as a new one.
The module has an alarm event setting for an individual number or a group of numbers, an alarm event can be:
text information of any content (detain, inspect, skip, etc.)
sound signals
light indication (signal lamps or LEDs are connected to the controller)
turning on any external device.
In order to objectively identify the car, the following information can be added to the database: make, VIN - code, color, owner's full name, contact information. Based on the recognition results, this information will be displayed on the operator's monitor.
System requirements, provided that the video surveillance server and recognition module are installed on one workstation - Win 7, 8, S2008R2 32 and 64-bit OS, recommended technical requirements for the workstation (we are considering installing the module for 4 recognition channels of the parking version) - Intel® Core ™ i5-4460, RAM 8 Gb, Radeon HD 7750, system SSD 120 Gb, HDD 4 Tb.
Integration with ACS systems
The module has integration with manufacturers of access control and management systems Sphinx and Parsec. The integration level implies the use of the recognition module as a source of identifiers (license plates) for the access control and management system.
- Sphinx controllers -price from 12 510 rubles
- Sphinx software -price from free to 31 800 rubles
Formation of reports on the operation of the module can be carried out according to the following parameters: events related to a single number of a car or their group (one number can belong to several groups), events for a certain period of time, in the direction of movement of vehicles, permission of passage by the security operator, according to recognized or unrecognized license plates.
10. Kodos-Transport
The system of automatic license plate recognition, operational monitoring and accounting of vehicle access is an independent application that can work as part of an integrated security system built using video surveillance servers "GLOBOSS" and ACS "IKB KODOS". The module has two types of implementation according to its intended purpose - "KODOS-Transport" only allows recognizing and registering license plates, "KODOS-Transport-KPP" has an additional section that allows you to control executive devices. The maximum speed of registration of vehicle numbers is the same for two types of sales - up to 200 km / h.
It should be borne in mind that when purchasing a software kit for 2 recognition channels, there is a vehicle speed limit of up to 60 km / h, and for a vehicle speed of up to 200 km / h, only one channel can be used.
- Developer: Kodos. Official site:www.kodos.ru. The address: moscow, Polkovaya street, 3, p. 2
Kodos-Transport has a full-fledged server-client structure, which can be built on Firebird and MS SQL database servers. The database is installed on one computer, each next workstation is connected to the same database. In a small access control system, the entire software suite can be installed on one computer.
Client connections are implemented through the Kodos-Transport. Administrator ”, their number in the system is not limited, but each requires a separate paid license. FireBird v.2.5 is used as a base DBMS.
Attention. The system must have the installed Kodos-Transport. Administrator". Installation of the GLOBOSS video server with the IKB KODOS ACS server or the KODOS-Transport recognition module on one workstation is not allowed.
Interface capabilities with incorrect recognition
In case of incorrect recognition of the vehicle license plate, the module provides for the possibility of its manual correction, such an action will be displayed in the event log as an adjustment.
The module has a convenient interface for processing applications for the passage of vehicles with the possibility of their sighting by a limited number of people.
In order to objectively identify the car, the following information can be added to the database: make, VIN - code, color, photo of the car or owner, full name of the owner, contact information.
System requirements for the installation of all KODOS products - OS Win 7, 8 32 and 64 bits, minimum technical requirements for a license plate recognition workstation (we are considering installing a module for 4 recognition channels of the parking version) - Intel® Core ™ i5-4460, RAM 8 Gb, Radeon HD 7750, system SSD 120 Gb, HDD 4 Tb.
Hardware
The maximum number of cameras connected to one workstation or license plate recognition server is 16.
In the stand-alone mode, when implementing simple driving directions using the KODOS-Transport-KPP application, the EC-602 controller can be used to control the actuators; additional software is installed for its operation. In complex control systems, it is advisable to use the IKB KODOS ACS server.
The module is designed to work with both IP and analog video cameras, the criteria for selecting cameras can be found here.
Integration with ACS systems
The module does not integrate with third-party ACS manufacturers; KODOS has its own set of hardware and software for these purposes.
Reports
Passage reports can be sampled using the following data:
Date-time of events for each point of travel;
Passage name;
Direction of movement (entry / exit);
Recognition - car number and recognition accuracy factor;
Driver - full name of the assigned driver;
Operator - the name in the system and the full name of the operator on whose shift the vehicle entered / exited.
In addition to the tabular section, the report contains a video data section - a snapshot obtained at the time of license plate recognition (the field is designated “License plate recognizer camera”), and links for viewing the video archive received from surveillance cameras assigned to the passage (only if the module works with the GLOBOSS video surveillance server ).
11. Domination AUTO
Domination AUTO is a system for automatic identification of state registration plates of cars, focused on the network architecture.
The Domination AUTO module is a client application - cameras connected to the Domination video server are used for license plate recognition, the database can be stored on any computer or server, the client-server connection must be constant. Installation of the entire software package on one computer is not possible, since the Domination video server runs under Linux.
- Developer: Vipax +, Official site:www.networkvideo.ru ... Address: Russia, Perm.
The number of free client connections is not limited. Rights and powers are assigned to each user separately. The module has a very wide list of settings (distinctive feature).
Interface capabilities
The module provides for the possibility of manual correction of the vehicle number, such an action will be displayed in the event log as an adjustment. In case of close coincidence of the unrecognized number with the number in the database, an auto-correction option will be offered.
The setting of an alarm event is implemented for a separate number or a group of numbers, there is no binding to a specific type. An alarming event can be:
text information of any content (detain, inspect, skip, etc.)
sound signals (you can customize your sound file for each event)
light indication (signal lamps or LEDs are connected to the controller)
turning on any external device.
Video - overview of the Domination AUTO interface
The module implements the possibility of photo-identification of the vehicle, a photo of the vehicle is added to the database for this purpose (one image can be used). Additionally, you can add:
brand
model
car color
Owner's name
contact information
When the license plate is recognized, this information will be displayed on the monitor screen.
System requirements for installing the recognition module - OS Win 7, 8 32 and 64 bits, minimum technical requirements for the license plate recognition workstation (we are considering installing the module for 4 recognition channels of the parking version) - Intel® Core ™ i5-4460, RAM 8 Gb , Radeon HD 7750, system SSD 120 Gb, HDD 4 Tb.
Hardware
The maximum number of cameras connected to one module of recognition is 4, the number of modules in the system is not limited.
To control external devices and receive sensor signals in the system, the ADAM-6066CE controller is used, for this purpose, additional free software is installed in the recognition module and the operation algorithm of all devices is configured.
Integration with ACS systems
The module is integrated with the Sphinx access control and management system. Integration level is the source of identifiers (license plates) for the ACS system.
- Sphinx controllers -price from 12 510 rubles
- Sphinx software -price from free to 31 800 rubles
Auto-Intellect is a system for automatic license plate recognition and traffic safety.
System requirements - OS Win 7, 8 32 and 64 bits, minimum technical requirements for a license plate recognition workstation (we are considering installing a module for 4 recognition channels of the parking version) - Intel® Core ™ i5-4460, RAM 8 Gb, Radeon HD 7750 , system SSD 120 Gb, HDD 4 Tb.
The maximum number of cameras connected to one workstation or server with a recognition module is limited by technical specifications, there are no other restrictions. The list of supported devices can be found here.
Developer: Official site:. The address:
Video - n
configuring Auto-Intellect software modules
Integration
The module is integrated with Gate, Perco and Parsek access control systems. Integration level is the source of identifiers (license plates) for the ACS system.
13. Auto-Hurricane
The Recognition Technologies company is a leading Russian developer of automatic systems for photo and video recording of traffic flows. The AutoUragan system is the main development of the company. The hardware and software complex "AutoUragan" is a system of automatic video recording and identification of state registration plates of vehicles.
- Developer: "Recognition Technologies". Official site:www.eng.recognize.ru. The address: Moscow, st. Electrozavodskaya, 24
In Auto-Hurricane, there is a limitation for connecting up to 16 cameras per server or workstation with the recognition module installed.
To control external devices or receive signals from sensors or other devices, software for ICP DAS controllers of ET-7000 or I7000 series has been added to the module. With their help, you can receive signals from external devices and control them.
Interface capabilities
If the vehicle license plate is incorrectly recognized, there is no possibility of manual adjustment in the Auto-Hurricane recognition module.
Alarm event setting is implemented for a separate number or a group of numbers. An alarming event can be - text information of any content (delay, inspect, skip, etc.), sound signals (for each event, you can configure your own sound file), light indication (signal lamps or LEDs are connected to the controller), the inclusion of any external devices.
The module implements the ability to identify a vehicle, the following information is added to the database for this purpose - brand, color of the car, owner's name, contact information. When the license plate is recognized, this information will be displayed on the monitor screen.
The recognition module has the ability to take several pictures of the car using additional overview cameras. By pressing one button, the operator can record and save a separate video when the car passes, that is, in the case of leaving the parking lot, the operator can play a video or photo of the entrance to the parking lot of the car with the same recognized number and compare them.
Client software
Auto-Hurricane is a full-fledged server-client application, in a simple scheme it is installed on one terminal, in the case of an extensive system, separate terminals work with one database (the basic version of PostgreSQL 9.2 DBMS), which can be stored on any of them or on an external server. With the help of special software, work with external databases is provided, while it is possible to use several databases.
The number of client connections is not limited, one license is included in the basic package, the rest are paid. Rights and powers are assigned to each user separately to the extent required.
System requirements for installing the recognition module - OS Win 7, 8 32 and 64 bits, minimum technical requirements for the license plate recognition workstation (we are considering installing the module for 4 recognition channels of the parking version) - Intel® Core ™ i5-4460, RAM 8 Gb , Radeon HD 7750, system SSD 120 Gb, HDD 4 Tb.
Integration with ACS systems
The module is integrated with the Parsec access control and management system. Integration level is the source of identifiers (license plates) for the ACS system.
Reports
The module has a convenient interface for generating reports on the following criteria or time interval - car number, group of numbers, travel time, point of passage, direction of travel
Photographs of the vehicle's passage facts can be attached to the report.
Choosing a CCTV camera
Before we move on to the recommendations for choosing a camera for the license plate recognition system. I would like to warn everyone against one dangerous, but extremely common misconception. It is impossible to carry out a general overview of the territory and recognition of license plates from one camera.
The camera that you will use to recognize license plates should perform only this function and nothing more.
The resolution of the video camera must be able to form an image of the license plate at least 140 pixels horizontally on the license plate.
As you understand, the number of pixels that will be on the license plate will depend on the width of your passage and the resolution of the camera. Also, the distance between the camera and the driveway, of course, but for our purposes we will proceed from the fact that we have the ability to move the camera to the most convenient place for us.
For example, for the most common passage width of 4 meters, in most cases a 1 megapixel camera will suffice.
The second important recommendation is die size. The larger the matrix, the greater the camera's light sensitivity, and the higher the camera's light sensitivity, the greater the percentage of recognized license plates. 1/3 inch is the minimum sensor size that should be used for license plate recognition purposes. And cameras with 1/2 '' sensor size would be ideal.
- CCTV camera with 1/3 inch matrix size -price from 1 190 rubles
- CCTV camera with matrix size 1/2 "and above -price from 29 900 rubles
One important and general recommendation for choosing a location for installing the camera is that you should not install a CCTV camera far from the driveway, since in this case even the slightest vibration, for example from the wind, can greatly affect the recognition quality, and as you understand, not for the better.
We will leave such camera characteristics as shutter speed, backlight compensation, depth of field, noise and color rendering, video compression and other balancing act and aerobatics for private consultations.To accurately calculate the characteristics of the camera, we recommend using specialized calculators, here is an examplesuch a calculator from company .
In conclusion, I would like to say about one very simple way of determining whether a camera is suitable for recognition or not. If you can clearly read the license plate on a freeze frame with your own eyes, then the license plate recognition system will accurately recognize it.
conclusions
Frankly speaking, any software that we have come across provides an acceptable recognition quality, usually in the range from 90 to 99%. and believe me for 11 years we have managed to face a lot.
The final recognition quality will largely depend on the choice of a CCTV camera, system design and installation quality.
But in practice, very often you may need to do more than just recognize the license plate and, on this basis, make a decision on admitting a car to the territory. You may need integration with access control systems you may need blacklisting you may need integration with a video surveillance system. You may need a variety of reports and in some systems this functionality may not exist at all, in some it may be extremely rich.
Or you may need to achieve not 99% of which you can actually achieve in life, but 100%. And this is also quite realistic to achieve, for example, with the help of such software capabilities as manual correction, the number is not recognized by the operator. As you can imagine, not all software supports this feature. You may need to be able to provide your tenants with the ability to arrange guest passes for vehicles themselves. consultations are free .Well, and the most important thing is your opinion.
Nothing motivates me to write new articles as much as your rating, if the rating is good I will cut the articles further, if negative I think how to improve this article. But, without your assessment, I do not have the most valuable thing for me - feedback from you. Do not take it for work, choose from 1 to 5 stars, I tried.A couple of months ago, Hikvision officially introduced the firmware for cameras of the 4th series with the ability to recognize license plates. This firmware can be downloaded from the official website of Hikvision in Russia, the firmware is absolutely free and fits even to cameras purchased more than 2 years ago, the only drawback at the moment is the disabling of all smart functions, except for license plate recognition (this is due to the high load on the camera processor). At the moment, any owner of Hikvision Series 4 cameras can test the possibility of this firmware on their cameras. The platform built into the camera detects and recognizes license plates, and sends the information to or for access control.
For the correct performance of the license plate recognition function in the 4-series Hikvision camera, a number of parameters must be observed:
- the horizontal angle is critical for recognition, and it should be within 0-7 degrees;
- the number must occupy at least 130 pixels in the image;
- camera firmware specialized 5.3.0_150719. So far only in English
What do we get via browser:
For private purposes, they removed the license plate picture and one sign from the recognized number.
As you can see, the camera recognizes the license plate, indicates the time, region and photos of the license plate itself, if the license plate is not recognized for some reason, a screenshot is taken and it can be recognized manually. To save data in case of loss of communication, there is a buffer in the camera for 1000 numbers.
What do we get via Smart NVR (in our case, with firmware V3.4.0):
We receive a set of photos with the date, camera number and the recognized car license plate. The registrar collects and stores this information. It is possible to search both by time and by number, by any number and letter, for any period of time. All necessary information can be downloaded to an XLS file.
And also, you can download back the file indicating the numbers from the black and white lists, and thereby automate the opening of the executive mechanism.
The last option for obtaining information is. Today, it is this system that fully supports all the functionality of license plate recognition and other intelligent camera functions. In iVMS-5200Pro in the interface "License Plate Recognition" in real time, to the right of the Smart camera video sequence, the last 8 license plates are displayed with the time.
For private purposes, one character was removed from the recognized license plate.
In this case, by clicking on the license plate, a detailed picture appears: 
Search for information: all numbers and images of cars go to the Database, where it is easy to search for them by parameters ( you can use any number and letter of the number, for any period). To do this, open the Number Request interface and indicate the information we are interested in.
We tested this system on 2 cameras + DS-7616NI-E2 with firmware V3.4.0 and iVMS-5200Pro software from Hikvision (not so long ago in the updated version IVMS-4200 2.3.1.3 this module also appeared and was tested). The percentage of recognized license plates was ~ 70% , but, in our case, this was due to the inability to set the camera perfectly and comply with all the parameters in the horizon angle to the car number.
From the experience of our colleagues from St. Petersburg: “According to information from the manufacturer, the percentage of recognized license plates is 85% at a speed of 65 km / h. In practice, sometimes 100+ cars drive along the embankment, but the license plates are recognized correctly. As for license plate recognition in the dark, according to information from the manufacturer, and based on common sense, it is necessary to install an IR illuminator with a wavelength of 850 nm. In our case, the camera is mounted high and the spotlight does not fit. "
In the above, we used a "bundle":
2) Lens Tamron 5-50
3) Hikvision 1313HZ-S thermohousing 
In general, the system works with dignity, license plate recognition takes place directly on the camera, the load on the client's PC is minimal (even if all cameras work with recognition), the system can read information from 4 lanes simultaneously.
The economic part of this solution: Hikvision Series 4 cameras cost from 19,990 rubles. for separately you need a thermal casing and a good lens), and 39,990 rubles. for if you add a 16-channel recorder here, this is an additional 16,990 rubles. The cost of a license plate recognition system with one camera (option for 39,990 rubles) based on a video recorder will cost 57,000 rubles. When using 2-3 cameras, the price of the solution per channel will decrease and actually equal the cost of the camera itself.
Official dealer of Hikvision (Hikvision) in the Urals (C) 2017
License plate recognition is used in our country relatively recently. This is used primarily by representatives of law enforcement agencies on highways and within the city. Drivers who violate the speed limit, parking and other traffic rules are fined based on the video recording of the security camera and the identification of the car license plate.
Often, the decryption function is also needed by an ordinary driver (for example, in a collision with a car, escaping from the scene of an accident). Having a car registrar's record, the driver can decipher the number himself or send the video for examination.
What can be seen on a CCTV camera and how to do it?
Recently, the license plate recognition program has become increasingly popular not only among specialized bodies, but also among ordinary citizens. Depending on the quality of the video and the circumstances captured in the footage, you may have difficulty with.
Video is used for decryption:
- from the car recorder;
- from a street camera of a private house or organization;
- from a street camera to a store or other institution.
Domestic developers have created many programs that make images clearer and more understandable.
License plate recognition: assistance to the investigation
Online viewing of CCTV camera recordings can be done via the Internet or through specialized programs that need to be installed directly on a personal computer. All this can help the investigation in those situations where law enforcement officers are leading, where the attacker has disappeared.
The lion's share of such devices has following benefits:
- The exact time, date and frame are recorded, which got a car with a specific license plate;
- Can track location vehicle on cameras in real time, to intercept;
- Based on the date, time and location (where the car was sighted) you can find a specific number in the file;
- Available function of working with an existing database, obtaining more detailed information about the machines, updating them, intercepting in a short time.
Today, law enforcement officials, customs officials are the main consumers of such programs, but their popularity is growing among ordinary drivers who need to find a car with a specific number or are trying to help the investigation.
License plate recognition software: an overview of popular models
Programs for recognizing license plates, which have really worked well, can only be obtained for a fee by contacting the manufacturer or their distributor.
We monitored among the most popular tracking programs and identified the most interesting of them:
1. Automarshal
Due to the simplicity of the device, the program shows excellent results, reaching almost 98% accuracy of license plate recognition. Depending on the quantity, the cost of the software can vary from twenty to one hundred and fifty thousand rubles.
Scope of application: It is most often installed at checkpoints, checkpoints, and other passages. When working, only two recognition algorithms are used. In this case, the system can be installed on high-speed routes, where cars move at speeds up to 150 kilometers per hour. Image quality and clarity of recognition will not be affected by this.
2. NumberOK
This program specializes in the recognition of data received from IP cameras. According to the developers, recognition can be done directly through the car recorder thanks to the computer video capture card. The speed of moving cars can exceed two hundred kilometers per hour, while the program guarantees 95% recognition quality, image clarity. The retail price of the program reaches almost 27,000 rubles.
Scope of application: It can be installed in car washes, parking lots and other places where there is a large flow of cars.
3. Recognitor application
For devices running on the Android operating system. The peculiarity of the program is that users exchange data on the received numbers, thereby replenishing the database by joint efforts. At the moment it is freely available, but does not give such excellent indicators as previous programs. Here, the clarity of recognition reaches around 85%. At the same time, the quality of the final image is not high enough, pictures are often blurry and not clear.
But the developers claim that they plan to refine the existing software and provide users with better image quality. after modifications, not yet known.
License plate recognition software is increasingly being used by users and specialized services. The above programs are the most popular, but not the only ones on the market.
There are many systems for automating the entry of cars into the territory of a protected facility. Starting from a banal guard in a booth with a button and ending with an electronic pass or a radio key fob.
The electronic license plate recognition system stands out on this list and until recently was not very popular.
There are several reasons for this.
First, the high cost of equipment and the complexity of the setup. Secondly, the active rejection of innovation, including acts of blatant sabotage, by the guards themselves, whose work is now tightly controlled, excluding the possibility of additional earnings.
However, there are significant advantages that the license plate recognition system provides:
- a significant increase in the level of safety and control of road transport at the facility;
- it excludes the possibility for third parties to enter the protected area using counterfeit or stolen magnetic passes or electronic key fobs. (a car can also be stolen, but it is much more difficult);
- automatic reporting of vehicles with the ability to generate multiple reports;
- remote access capabilities allow the management of the organization to control the work of employees;
- the license plate recognition system can be easily integrated into the general access control system of the organization.
The possibility to enter the territory of the guarded object by gluing the numbers printed on the printer to the car number is completely excluded. Almost all automatic license plate recognition systems control the light reflectance that paper does not have. The pasted number will simply not be read.
The scope of automated license plate recognition systems is quite diverse. First of all, license plate recognition will be useful at service stations, gas stations, car washes, warehouses, enterprises, parking lots.
The functions that such an automatic license plate recognition system can perform are quite diverse:
- control of entry and exit to the controlled area;
- restriction of leaving the territory of the enterprise, for example, a bus station, a client who has not made a payment;
- monitoring the loading of the service area.
In combination with access control systems, license plate identification provides additional benefits. First of all, it is full control over the location of vehicles in the loading area of \u200b\u200bthe enterprise. This makes it possible to track the import of raw materials or the export of finished products, check the efficiency of loading and unloading operations and prevent theft.
At the same time, checking the car number not only at the entrance, but also at the exit, excludes the possibility of exporting goods under false or erroneous accompanying documents.
But the owner of the parking lot or parking lot gets the most benefits. The automatic license plate recognition system will allow you to control the occupancy of the territory in real time, which will make it possible to take measures to improve efficiency.
Combining license plate recognition with a payment system will completely eliminate the possibility of abuse or theft by employees. It will also completely eliminate the possibility of errors in calculating the time spent by the vehicle in the parking lot and will give iron proof in disputes with unscrupulous customers.
TECHNICAL CHARACTERISTICS AND COMPOSITION OF EQUIPMENT
The system for automatic license plate recognition, depending on the manufacturer and model, may include several devices and a software complex with modules that perform various analytical functions or serve atypical devices. For example, truck scales, speed radar, etc.
Requirements for the computer on which the program will be installed.
The minimum requirements for different programs can vary significantly depending on the functional load, but in most cases it is necessary:
- processor, at least 3 GHz;
- video card: Intel, ATI with OpenGL or nVidia at least 512 MB;
- rAM, not less than 4 GB;
- HDD disk of at least 4 GB.
Video recorder with RTSP function.
It is a streaming protocol that allows not only viewing and recording information, but also using video in real time. An example of such recorders is the HIKVISION DS-7204HVI-SV model.
CCTV camera with RTSP function.
Such devices for recognizing the license plate must have a resolution of at least 550 TVL, which is provided by a 1/3 "760H matrix. The focal length is 9-22 mm, which will make it possible to identify at a considerable distance and at a fairly high speed, for example, Atis AW-CAR40VF or AW-CAR180VF.
The light sensitivity of the camera should be as high as possible, from 0.001 Lux, in addition, the device must be equipped with IR illumination enabling high-quality shooting from a distance of at least 15-20 m.
- manual setting of exposure;
- automatic white balance;
- backlight compensation;
- high dynamic range.
These cameras will be used exclusively outdoors, therefore, it is imperative to have an IP 66 enclosure protection class with built-in thermoelements that allow the device to operate at low temperatures of at least -30 ° C.
It is recommended to use black and white cameras as they have higher sensitivity and resolution than color cameras. In addition, most car license plate recognition algorithms convert the color image received from the camera to black and white.
Actuators and control modules.
For example, the "BARBOS" module is connected to a PC via a USB connection. This module has 4 five-ampere relays, through which you can control a barrier, gate, wicket, lighting, GSM notification, various indication systems brought to the control room, etc.
CAMERAS FOR RECOGNIZING CAR NUMBERS
The main parameter that you should pay attention to when choosing a place to install CCTV cameras for license plate recognition is manual exposure setting. There is a linear relationship between the vehicle speed and the recommended shutter speed (frame exposure time - shutter).
The higher the vehicle speed, the shorter the exposure time should be, otherwise the frame will be blurred - motion blur. However, the maximum allowable shutter speed depends not only on the exposure time, but also on the camera angle. The camera angle is the angle between the direction of the vehicle and the optical axis of the camera.
Most camcorders in the middle price category are capable of transmitting a recognizable image of a license plate with a width of 80 pixels at a vertical angle of installation up to + 30 ° and horizontal angles of deflection +/- 30 °. A good indicator is considered if the system recognizes the license plate when it deviates from the horizontal (uneven road) +/- 10 °.
The graph of the dependence of the exposure time on the camera angle and the vehicle speed is shown in the figure.
Software.
Software - is a key element of the license plate recognition system. There are many development firms offering their product to the consumer.
Most common budget development "NumberOK".
It recognizes Russian, Ukrainian, Belarusian and Moldovan license plates, fixes the date and time of entry and exit of vehicles and the time spent on the site. Has the ability to build simple reports and can be integrated into 1C. The program is compatible with most video cameras and DVRs with RTSP function.
The second most important is the license plate recognition system "Automarshal".
It has 2 recognition algorithms, one for speeds up to 30 km / h, the second - up to 150 km / h. Has specially adapted modules "Parking", "Car wash", "ACS Gate". Ample opportunities for building analytical reports, management via the WEB client and the function of sending SMS notifications.
The vehicle license plate identification system has wider additional capabilities. "Traffic control" research and production association "Discrete".
This program can connect to truck scales and bind gross and net values \u200b\u200bto the number, as well as generate summaries, balances and other reporting documents. "Traffic control" maintains a photo archive of the moments of vehicles passing through the checkpoint and has wide analytical search capabilities, by car or camera number, time and date.
System "Car number" from the ELVIS Neo Tech company.
The structure includes the modules "Auto-control", "Senesys-Avto" and "Auto Number". The program has significant integration capabilities with other video surveillance systems and access control systems, as well as a flexible report generator, good capabilities for archiving and searching through it.
Undoubtedly, professional license plate recognition systems are quite expensive. And the use of an adapted conventional video surveillance system and demos of specialized software is not as effective as we would like.
But the use of this kind of video analytics can bring the business related to road transport to a qualitatively new level, both in terms of control and in business analysis.
* * *
© 2014-2020. All rights reserved.
Site materials are for informational purposes only and cannot be used as guidelines and normative documents.
1.1 Cameras
DS-2CD4A25FWD-IZ (H) (S) Lightfighter bullet and
DS-2CD4A26FWD-IZ (H) (S) Darkfighter bullet
Outdoor bullet camera with IR illumination
- Works in very low light conditions,
- excellent work of compensation of oncoming light,
- cylindrical, weatherproof, robust housing,
- license plate recognition,
- b / w filter list,
- alarm output
- Darkfighter Ultra-low light technology High Definition 1920x1080
- Up to 60fps @ Full HD1080p 120dB WDR
- 2.8 ~ 12mm motorized VF lens with intelligent autofocus
- H.264 smart codec + compact compression IR illumination 50m.
- IP67 protection
- Power supply + -12V DC and PoE
- Built-in storage, support up to 128GB
- ANPR, B / W List Filtering support
Options:
Built-in heater (-H)
Audio / Alarm I / O (-S)
Cameras suitable for license plate recognition are initially supplied with firmware for counting people passing by,
therefore, at the request of the customer, they are reflashed for this function.
The flashing does not completely remove the counting function and allows you to return to it if desired by selecting the SMART Event, as shown in the figure below.
1.2 Solution
Solutions Hikvision's license plate recognition provided by the camera itself can be divided into:
one). Classic license plate recognition and issuing a list of recognized numbers directly from the camera
- Actions if the number matches the list recorded in the camera (admission to the territory, turning on the siren, sending a message)
When a number appears from the list, the chamber's dry contact closes, which is a signal for the barrier control unit.
2. Requirements for the camera and installation site
2.1. The license plate must be legible and well lit.
2.2. The license plate must be at least 150 pixels wide.
2.3. Allowable tilt - no more than 5 ° (clockwise and counterclockwise).
2.4. The vertical angle is no more than 30 °.
The original formula is � \u003d ℎ ∗ √3.
2.5. Horizontal angle - no more than 30 °.
2.6. If it is necessary to recognize license plates from two lanes, as a rule, it is recommended to place the camera on a crossbar.
2.7. It is necessary to choose the correct distance from the camera to the recognition site
2.8. When recognizing license plates at night, an IR illumination is required.
2.9. The shutter speed should be fast enough to reduce headlamps at night. As a rule, we are talking about 1⁄1000.
2.10. The depth of focus is a very important parameter. If you are using a camera with a CS lens mount, use a fixed lens. Fixed lenses are better for recognition because of the greater depth of focus.
2.11. When choosing a mounting location, remember that direct sunlight can distort the picture.
2.12. When installing the camera on the side of the road, check how the support responds to the passage of heavy vehicles or convoys. If the support vibrates significantly, this will affect the efficiency of the system.
2.14. In rare cases, a false detection situation may arise.
To minimize this, you need the following:
- select the recognition area correctly.
- try changing the angle of view or the location of the camera.
- adjust the settings for the minimum and maximum license plate size in the settings.
3. Vehicle detection
An intelligent IP camera detects a car by identifying and recognizing a license plate, giving the following data to the registrar, iVMS-5200 or another consumer:
- Travel time (hours and minutes)
- Direction of travel ("entry" and "exit" when choosing a travel zone)
- License plate (letters and numbers)
- Country of registration (name)
- Screenshot with number (small picture)
- Full screen screenshot
- Video of the moment of determination (+/- 1-5s)
- Auto-recognition of black / white lists (issuing the corresponding alarm)
- Alarm output relay activation (on the camera itself, in the recorder it is configured separately)
The information received from the camera is managed by the corresponding consumers:
You can configure the transfer of information and the actual recognition of license plates on the camera at the following consumers:
a) Configuring recognition on localNVR
If NVR is connected to iVMS-4200, then DVR and camera can be configured from it:
b) Recognition iniVMS-4200
And even in iVMS-4200, you can perform all the control of the recognition process, but independently without an NVR, it is just a shell that can only use the usual functions of video surveillance from these cameras.
c) Configuring recognition oniVMS-5200 P
IVMS-5200 Pro has advanced analytics that uses license plate recognition in various types of social and business activities.
Recognition setting on camera
On the camera itself, through the web-inteface, it can be configured for any user, adjusting it already on it, but to connect the actuator, the setting is done only on the camera.
This is where we will be looking at the vehicle detection function to open the barrier.
4. Camera setup
4.1. To process a license plate recognition event, such as opening a barrier, first of all, it is necessary to configure the "Alarm output", by closing the dry contact of which the mechanism will be triggered.
Without this, there will be no electrical reaction to a further adjustable recognition.
However, if the use of mechanization is not planned, then this is not necessary.
4.2. As a rule, it is not supposed to open the barrier for all visitors, but only for "our own", or in extreme cases, not let only certain ones. Therefore, it is necessary to enter ahead of time the "white" and "black" list of numbers, for which you need to get its form from the camera itself by pressing the "export" button.
I would like to draw your attention to the name of the font used in the document, which, of course, is not in your system, but it is it that is necessary for the camera to correctly perceive your presets:
After filling in the file with the list of numbers, you need to select the filled cells of the header row, making sure that the font is named in Chinese, and then use the Excel button to copy the format by example
Then you need to apply this format to all the cells you entered, highlighting them so that they are all written in a font with a Chinese name.
4.3. After importing the prepared Excel file, the camera will fill in the data of the "white" and "black" lists:
Note: Unfortunately, with lists until somewhat sad:
And now, only after all that has been done previously, you can proceed to setting up license plate recognition and turning on the trigger reaction to numbers from the "white" list
4.4. Set the number of recognition bands and adjust the zone, and then select the region.
Supported countries in the "EU and CIS" option:
Czech Republic, Germany, Spain, France, Italy, Netherlands, Poland, Slovakia, Belarus, Moldova, Ukraine, Russia, Belgium, Bulgaria, Denmark, Finland, Great Britain, Greece, Croatia, Hungary, Israel, Luxembourg, Macedonia, Norway, Portugal, Romania, Serbia, Azerbaijan, Georgia, Kazakhstan, Lithuania, Turkmenistan, Uzbekistan, Latvia, Estonia, Austria, Albania, Bosnia and Herzegovina, Republic of Ireland, Republic of Iceland, Vatican, Republic of Malta, Sweden, Switzerland, Cyprus, Turkey, Slovenia.
4.5. Select the "In / Out" mode.
4.6. Check and re-save the schedule.
4.7. Turn off "All" by selecting "White List" and enable triggering of the alarm output.
4.8. Enable recognition and save the settings.
5. License plate recognition
- The recognition process can be seen in a special setting tab.
- However, the results of detection and recognition can be seen in the archive only of the registrar.
- The camera will be able to write to its own memory card only constantly and by events:
Screenshots of license plate identification can also be sent to the FTP server by checking the box in the Communication method section of the Search configuration tab of the Traffic menu.
6. Conclusion
Dont be upset! On NVR, iVMS-4200 & 5200 all the above mentioned problems are not present! Everything works correctly there and has great functionality!
