Having descended from the warranty, one of the conditions (not quite fair, by the way) is the passage of the official dealer, some of the owners prefer to perform basic operations independently.
Indeed, change the oil or air filter on most cars is easy, so this is a matter of not even saving money, and the desire to work out with your own machine and confidence in the quality of work done by your own hands. And, indeed, change the oil filter in Toyota Camry will not be a lot of work, and even fill the oil - especially.
Oil selection and oil filter
For the current body (V50), the manufacturer for all engines has the use of low-visual energy-saving oils (classifier by ILSAC - GF-4) with a viscosity of 5W-30 or 0W-20.
The second option is optimal for regions with a cold climate. A rough error will be the use of common 5W-40 oils, even if they correspond to the desired quality category on the API (no less SL), since the motors designed for low-viscous oil begin to actively spend more thick (thin oiling rings do not cope with a stronger oil film on the walls of the cylinders). This is especially true for a 3.5-liter 2GR-FE motor.
Accordingly, choosing an analogue of the original oil, you need to look first for the presence of an ILSAC classifier - for example, the requirements are satisfied by Mobil 1 Advanced Fuel Economy, Castrol Edge Professional A5. Filling volumes: For a two-liter motor - 4.3 liters, for a motor 2.5 - 4.4 liters, a motor 3.5 will be required to be 5.7 liters.
On the 1AZ-FE motor (2 liters), a filter with the original designation 90915-10004 is used. His analogues - MAHLE OC17, MANN W610 / 9, Champion Cof100138S.
The 2,5-liter Motor 2Ar-Fe is no longer equipped with a cabinet, but a cartridge filter. The installation kit for cars, issued not for the Japanese market, has a marking of 04152-31090. Analogs - MANN HU 7019 Z, Bosch F026407098.
The 2GR-FE motor (3.5 l) also uses a cartridge filter with the same number and analogues.
Replacing the oil in the engine Toyota Camry do it yourself
A review pit or an overpass will be required for work, a basic plumbing set (to remove the crankcase protection), and for the greatest convenience - a plate puller oil filter. Given that on the Camry engines, the oil filter or the cartridge housing is looking down, to use such a puller will be most convenient.
Working with the car is best to start when the engine is not warm enough or cold: warming up a low-viscous oil is not necessary, it will also go well, but it will not be risks to burn. Also replacing the oil in the Toyota Camry engine will require the supply of a vehicle and suitable by volume with a capacity for drain.
Removing the protection of the crankcase on all cars is equally - the bolts around the perimeter are turned away, the protection is neatly falling down and to the side. At the same time, it is worth cleaning from the dirt accumulating from above.
At first, the main volume of oil from the pallet is merged - the drain plug is turned out, the jet "is caught" with a capacity, after that you can turn the plug of the filling neck - if it is turned off immediately, the oil jet will be stronger, the splashes will be raised when it is shot.
Drying oil until the end of the dropping, you can put a drain plug and start changing the oil filter. The case-type filter varies traditionally - the old one is turned off, its bustling plane is rubbed, then the new oil filter wets the seal, and the filter is delayed by hand.
Having twisted the cartridge filter, remove the old cartridge from the housing, drain the remains of the oil from the case and insert the new (plastic shank down).
Before installing the intake under the cartridge in the cartridge, we wipe the vehicle fibers do not fall into the central channel (feed oil in the engine).
Then the oil is poured into the engine with simultaneous control of the oil level - it should stand on the top mark or be slightly higher it. We start the engine, let him work a little and wasting - during this time the oil pump will drive the air from the system. We particularly note that neither the filter nor the cartridge must be pre-filling with oil - to drive the pump the pump is easier precisely through the dry curtain, and not moistened with oil, the air will remain in the system anyway.
In order for the oil overclocked by the pump managed to drain into the pallet, you can have time to install protection. Then the oil level is brought to the top tag of the probe.
The quality of the fuel and intervals of its replacement is directly dependent on the resource of the Toyota Camry 40 power plant. Even the most gentle driving mode does not save the engine from excessive wear, if the rubbing surfaces work without sufficient lubrication.
Therefore, during the operation of the machine, it is important to monitor the oil level, observe the intervals of the replacement and for the fill to use only well-proven products.
Toyota Brand Oil Review
Toyota Motor Corporation for its cars produces a rule of engine oils. They differ in price, viscosity, based, the number of additives and its properties.
One of the most suitable for Camry 40 is the synthetic oil Toyota 08880-10705. This lubricant is applied all-season. It has good antioxidant and detergent properties. The oil has shown perfectly when operating under conditions of low temperatures. It perfectly performs the functions assigned to it regardless of external factors. The most suitable oil is suitable for Camry with a 3.5-liter motor.
Motorists engaged in the forcing of their cars also charming respond to Toyota 08880-10705. It perfectly lubricates the surfaces in engines experiencing excessive loads.
The semi-synthetic oil from Toyota Motor Corporation has a smaller cost, but does not particularly infer in its characteristics of a synthetic-based lubricant. It is also all-season. Car owners note that the use of Toyota08880-10605 oil is the most optimal in 2.4 liters engines.
The oil with a small viscosity is more suitable for cars with a slight mileage. Car owners note that on Camry 40, the odometer of which shows more than 150 thousand kilometers, the Toyota 08880-10505 bay leads to a large masculine. In general, the oil is good and fully fulfills the functions assigned to it.
In the case of engines with solid mileage, it is recommended to use mineral oil. Toyota 08880-10805 well shows itself only on motors that are in the near future to be overhaul. Otherwise, car owners do not recommend using it, as:
- oil consumption increases;
- the engine starts more difficult, especially during the cold season;
- the lubricant replacement interval is required to reduce twice.
Synthetic oil Toyota "ENGINE OIL 5W-40" is focused on use in European. His bay in the Americans and Arakski is nothing bad will not end, but consumption can be essential.
Toyota "Engine Oil 5W-40"
The synthetic oil of Toyota "Engine Oil", shown in the photo below, is designed unlike the previous oil mainly for cars issued by Toyota Motor Corporation. It has fewer certificates, therefore the price is not lower. Operating properties of Toyota "Engine Oil" are at a sufficiently high level.
Toyota "Engine Oil"
The price for the original Toyota Motor Corporation oil starts from 1600 rubles for 5 liters of mineral water, from 1800 per 5 liters of semi-synthetic and from 2500 rubles for a similar synthetic canister.
Oil for engine Camry 40 from other manufacturers
Reviews about branded oil Toyota Motor Corporation are contradictory enough. Part of the car owners only uses the recommended oil, but there are drivers who believe that there is a lubricant better. Toyota does not prohibit the use of third-party liquids.
According to the reviews of motorists, a table of the best analogues of the native oil is compiled. A selection of lubricant takes into account not only manufacturers, but also the year of release, as well as other operational parameters.
The cost of oil from the above firms ranges from 1000 to 3000 rubles per five-liter canister.
Oil replacement regulations
- for mineral - every 5 thousand kilometers;
- for semi-synthetic and synthetic - 10 thousand km.
In case, in two years, the car did not overcome this distance, it is necessary to change the lubricant regardless of the mileage.
According to the recommendations of the car owners, the oil replacement should be reduced by half. This is especially true of machines of often extending in urban traffic jams or off-road. Sports style driving a car also requires more frequent maintenance.
In some cases, for example, after overheating or getting water into lubrication, the oil is required to change ahead of time. To diagnose the state of lubrication, it is recommended to drop the oil on the napkin. In the form of a vague stain, it is possible to determine its condition.
Determining the condition of the oil oil on the napkin
When diagnosing the condition of the oil, four control zones must be taken into account, as shown in the image below.
The filling volumes of Toyota Camry 40 are shown below in the table.
The manufacturer allows oil consumption to 1 liter per 1000 kilometers. Most of the car owners do not believe that this tolerance is too large and repairing the motor should if the engine is 2.4 liters eats more than 200 grams of oil per 100 km, and a 3.5-liter unit of more than 350 grams to a similar distance.
The process of replacing oil on Camry 40 do it yourself
Motor oil changes the instructions below:
- Remove Carter Protection.
- Unscrew the drain plug. From the opening, the old lubricant is poured into the engine.
- Wait until the oil is somewhat.
- Replace filter.
- Split drain plug.
- Pour fresh oil into the engine.
- Motor start. The signal is that the pressure of the oil below the norm should not be after a pair of minutes of operation of the power unit.
- Control his level. The oil must be in tolerances between the upper and lower stamps of the probe.
The new generation of Superpopular Car Toyota concern debuted in 2011. The eighth international generation of Camry outwardly differed drastically from the previous one while maintaining the same dimensions. The novelty received an enlarged salon and a large windshield, which significantly increased the overview when driving. The production of XV50 continued until 2014, after which the car was restyling.
If earlier official deliveries in the Russian Federation did not provide for a wide variety of complete sets, then with the new generation everything has changed and the choice of the buyer has now been presented versions, prestige, elegans, classic and standard. At the same time, even the most "modest" standard had a complete set of options, sufficient for the absolute comfort of the driver and passengers.
As for the line of the engines, three types of power plants settled under the hood of the 50th Kamry: 2.0 liters in the classic equipment and a standard with a capacity of 145 hp, 2.5 liters for the comfort version and above (180 and 200 hp), and Also 3.5 liters for the most expensive complete sets (249 hp). Russian imports provided for the 249th-strong version of the 3.5-liter motor, although in Europe the same motor had in the asset 272 hp. The aggregate was deformed that the model could compete with the leaders of the Russian market by transferring the car into a less high category of taxation. The average mixed fuel consumption on the previously listed installations was 7.8 (Motor 2.0), 9.8 (Motor 2.5) and 10.6 (3.5 motor) of a liter per 100 km. Information about the types of oil flowable and its consumption is indicated below.
Despite its advantages, Camry 50 had one impressive, but "strange" minus: the model occupies a leading position in the list of the most hijacked cars. This fact is explained by the ideal balance between price and quality and, perhaps, too rich filling.
Generation XV50 (2011 - 2014)
Toyota 1AZ-Fe / FSE 2.0 l engine. 145 hp
- Oil types (viscosity): 0W-20, 5W-20
- How many liters of oil in the engine (total volume): 4.2 liters.
Engine Toyota 2AR-FE / FSE / FXE 2.5 l. 180 and 200 hp
- What engine oil is filled from the plant (original): Synthetic 0W20
- Oil types (viscosity): 0W-20, 0W-30, 0W-40, 5W-20, 5W-30, 5W-40
- How many litters of oil in the engine (total volume): 4.4 liters.
- Oil consumption per 1000 km.: Up to 1000 ml.
- When to change the oil: 7000-10000
Toyota 2GR-Fe / FSE / FXE / FZE 3.5 l engine. 272 hp
- What engine oil is poured from the plant (original): Synthetic 5W30
- Oil types (viscosity): 5W30
- How many litters of oil in the engine (total volume): 6.1 liters.
- Oil consumption per 1000 km.: Up to 1000 ml.
- When changing the oil: 5000-10000
Car manufacturers pay great attention to consumables, in operating instructions indicate all the necessary lubrication parameters. Car enthusiasts, choosing oils for the summer or for the winter, should take into account the requirements of machine manufacturers, otherwise the engine can quickly fail. We invite you to familiarize yourself with the parameters of the recommended engine oil for Toyota Camry.
Model 1994 release
Automaker Toyota Camry insists on the use of universal lubricants of the SG class or SG / CD according to the API system. To select viscosity, it is necessary to use a scheme 1.
Scheme 1. Predicted temperature range by side of the machine until the next replacement of the car. In accordance with the scheme1 with the thermometer indicator above -23.5 0 C was recommended to flood liquids 10W-30, 10W-40, 10W-50. If the thermometer is higher than -12.5 0 C, then it is worth pouring 20W-40, 1-20W-50. At temperatures below +10 0 C need to use liquids 5W-30.
Filling tanks taking into account the oil filter are:
- 3.8 liters for 5S-FE auto motors;
- 4.5 l if Motor 3VZ-FE;
- 5.0 l corresponds to 1MZ-Fe Automotors.
Toyota Camry XV20 1996-2001
Model 1998 release - for 1MZ-FE motors, class S lubrication according to the API standards;
- for 5S-FE auto motors, the engine fluids of the SG group and above, in the absence of a danken machine, permissible to pour the SF class.
For the selection of viscosity lubrication parameters, the scheme 2 is used.
Scheme 2 Predicted temperature range by side of the machine until the next replacement of the car. In accordance with Scheme 2 at the temperature range above -18 0 C must be used 15W-40 or 1-20W-50 lubricants. If the thermometer is below +10 0 C, apply 5W-30 car.
Filling tanks:
- 1MZ-Fe Automotors:
- 5.5 liters dry engine;
- 7 liters with a change of oil filter.
- 5S-Fe motors:
- 4.3 l dry engine;
- 3.6 liters with a change of oil filter.
TOYOTA CAMRY XV30 2001-2006 release
Model 2005 release - According to the SJ or SL API system, having a viscosity of 20W-50 or 15W-40 are used at air temperature above -12.5 0 s (see Scheme 3).
- In accordance with the classification of the API classes, the SJ or SL classes that have the designation "Energy Conserving" or universal autosals certified by ILSAC. The applied viscosity of such lubricants 10W-30 at a temperature indicator above -18 0 C, or 5W-30, if the air temperature is below +10 0 C. Selecting the viscosity indicator, consider the scheme 3.
Scheme 3. Estimated temperature range Before the next replacement of the car. The volume of lubricant that will be needed upon subsequent replacement is:
- 3.8 l with an oil filter or 3.6 l without an oil filter for 1AZ-Fe motors;
- 4.3 l taking into account the filter or 4.1 liters without an oil filter if 2AZ-FE engines;
- 4.7 liters with an oil filter or 4.5 liters without an oil filter in the case of 1MZ-FE engines.
An exemplary volume of lubricant that needs to be addressed to the lubrication level was between the lowest and upper levels on the measuring probe Toyota Camry is:
- 1.0 l for 1AZ-FE motors;
- 1.5 liters in the case of 2AZ-Fe and 1MZ-FE power units.
Toyota Camry XV40 2006-2011
2008 release - All-season motor fluids with the designation "Toyota Genuine Motor Oil" or similar to the parameters of the car, having the appropriate labeling or tolerances on the canister.
- According to the standards of the API, the allowable classes of SL or SM lubricants. The viscosity parameter according to the SAE 20W-50 or 15W-40 system at a temperature indicator above -12.5 0 C (the temperature is selected according to Scheme 4).
- In accordance with the classification of API, the types of SL or SM machines that have the designation "ENERGY CONSERVING" (energy-saving) or all-season lubricants via ILSAC. The viscosity is selected 10W-30 with the thermometer indicator above -18 0 C, or 5W-30, if the air temperature is below +10 0 s (temperature indicators are taken from the circuit 4).
Scheme 4. The dependence of the viscosity indicator of engine oil on the temperature of the region in which the car will be operated. Filling tanks for Toyota Camry:
- Engine 2AZ-Fe:
- 4.3 l with oil filter;
- 4.1 liters excluding the oil filter.
- 2gr-Fe Automotor:
- 6.1 liters with an oil filter;
- 5.7 liters without oil filter.
TOYOTA CAMRY XV50 C2011 release
2013 release model According to the instruction manual, lubricating fluid for Toyota Camry engine is the original Toyota company or lubrication of other firms having the parameters required by the manufacturer. Class, type and viscosity of oil are determined by the type of engine.
6ar-fse and 2ar-Fe power units
According to the manual, it is necessary to fill oils with a viscous indicator 0W-20, 5W-20, 5W-30 or 10W-30 corresponding to the SL or SM classes with the ENERGY Conserving designation (energy-saving) on \u200b\u200bthe API system. It is permissible to use universal lubricants certified by ILSAC and having a viscosity parameter 15W-40. You can also apply the SL, SN or SM groups by the API system.
For the selection of viscosity, depending on the temperature overboard the machine, use the scheme 5.
Scheme 5. The effect of air temperature on the selection of viscosity of the car. According to Scheme 5, at extremely low temperatures, it is necessary to fill with lubricants 0W-20, 5W-20, 5W-30. Automal with viscous parameter 10W-30 or 15W-40 worth applying if the thermometer is above -18 0 With otherwise, the start of the motor will be difficult.
The volume of engine oil required when replaced is 4.4 liters, taking into account the oil filter and 4.0 liters without replacing the oil filter.
2gr-Fe Automotors
- SL or SM with the designation "ENERGY CONSERVING" (Energy Saving);
- SN with labeling "Resource-Conserving" (Resource Saving).
You can also cast lubricants certified by ILSAC and having a viscosity parameter 15W-40 or use SL, SL and SN oil groups with a recommended viscous indicator.
You can select a viscosity parameter according to Scheme 6.
Scheme 6. Predicted temperature range up to the next shift of the engine fluid. According to Scheme 6, at extremely low temperatures, it is necessary to use 5W-30 lubricants, and with the thermometer indicator above -18 0 s Pouring 10W-30 or 15W-40.
The volume of engine fluid required when replaced is 6.1 liters with replacing the oil filter and 5.7 liters without taking into account the oil filter.
Conclusion
Using the recommended engine oil for Toyota Camry, you can increase the engine and lubricant resource. The fact is that the lubricant creates a protective film on the surface of the internal elements of the auto motor, the properties of which depend on the quality lubrication parameters. The thick of the car, the thicker will be a protective film, such oils should be used for the summer, more liquid lubricants are used in winter, they provide a cold start of the motor. When using inappropriate oil parameters, the film can break the film, the engine will start working "on dry" - it will lead to its breakdown.
When replacing lubricants, consider:
- the manual indicates the reference amount of oil, which will be needed when the lubricant is replaced, in real conditions it can differ slightly;
- overflow of the machine above the maximum mark on the measuring probe is unacceptable, therefore, after the lubrication top is needed to check the level of lubricating fluid.
Look at the video on how to change the oil in Toyota Camry do it yourself:
Recommended motor oil for Toyota Avensis
