What kind of oil to fill in KIA Rio, taking into account the fact that the motor oil market in Russia is extremely saturated and can offer even the most demanding car enthusiast a wide selection of domestic and world brands - a difficult question. The cost, as well as the quality of the petroleum products themselves, can be completely different and depend only on the requests and the thickness of the wallet of the domestic buyer. At the same time, a large assortment of similar goods almost always means agony of choice and a difficult path to the store checkout.
Viscosity is the main indicator
Any driver knows that the oil in the "iron horse" engine needs to be changed periodically. Some car owners believe that oil change for cars operating in Russia must be seasonal - twice a year. This point of view, in principle, is correct and does not contradict the main requirement of the technical regulations for car maintenance - the obligatory oil change after a certain mileage. It is not forbidden to change it more often, but a more rare performance of such an operation can lead to trouble with the engine of your favorite car.
It should be noted that on all modifications of the KIA Rio releases from 2011 to 2015 inclusive, sufficiently reliable engines are installed that meet all modern requirements. At the same time, when deciding which oil to fill in this car, it is necessary, first of all, to be guided by such an important characteristic as its viscosity.
Viscosity is the main characteristic In fact, the viscosity of the engine oil determines the amount of its fluidity, and the right choice will help to save the engine parts and assemblies from wear before the due date.
Motor oil with a similar viscosity will reliably protect the car engine under severe loads without reducing its main characteristics and significantly extend its service life.
Criterias of choice
Most owners of KIA Rio prefer to use engine oil from foreign manufacturers. Such a choice is associated with the mandatory compliance of the imported product with high international standards, unsurpassed quality and recommendations of world car manufacturers.
At the same time, it should be noted that the high retail price for imported oil in no way precludes the purchase of counterfeit oil products in branded packaging. Unfortunately, in Russia there have been fake motor oil of world famous manufacturers at all times and this year is no exception. Therefore, it is advisable to avoid spontaneous purchases in questionable places from unknown sellers.
It is interesting that many Russian manufacturers have recently significantly improved the quality characteristics of their engine oil and are currently in serious competition with imported brands. In addition, domestic oil usually compares favorably in cost, which is important in our harsh times of crisis. Thus, which oil is better to fill in KIA Rio, each owner decides for himself because of his personal preferences and financial capabilities.
Ultimately, the choice of the manufacturer is not essential, the main thing is to timely and correctly replace the engine oil in the engine of your car.
For KIA Rio, the engine oil is changed periodically with a mileage of 10 thousand kilometers. The approximate volume of oil changeable in the engine is approximately three liters.
A timely change of engine oil can be carried out in a specialized car service or, if there is a desire and time, to be done by the owner of the car.
Which oil is better to fill in the KIA Rio engine - it's up to you
Self-oil change
This operation is not particularly difficult and with proper preparation it will not take much time. To change the oil in the KIA Rio engine, it is necessary to have a garage inspection pit or overpass in an open area. The procedure consists of two stages - draining used oil from the engine and filling with fresh one. An important point should be taken into account - most often the drain is made from a hot engine and as much as possible to protect yourself from the ingress of oil. Materials and tools necessary for the implementation of the event:
- Rags to eliminate smudges;
- Gloves or mittens for hand protection;
- Bucket or container for draining the waste product;
- Key for removing the oil filter;
- Key for unscrewing the cover of the pallet.
After carefully unscrewing the sump plug, completely drain the used oil from the engine into a bucket or other suitable container. Then unscrew the old oil filter and install a new one. After that, you need to screw the sump plug back into place and pour fresh oil into the car engine up to the corresponding mark on the dipstick. If there is a leak at the drain plug of the pallet, replace the gasket.
Timely replacement of the engine oil in the KIA Rio engine will ensure the proper operation of all engine components and assemblies, protect against overheating in the event of increased loads and ensure its trouble-free operation for a long time.
Video: What kind of oil to fill in the KIA Rio engine
21.04.2018
Kia Rio is a compact B-class car that has been successfully sold in our country for over 10 years. At the same time, the most popular are Rio of the second (2005-2009 onwards) and third generations (since 2011). They are considered reliable, dynamic, unpretentious, inexpensive to maintain and repair. These cars were equipped with four-cylinder petrol engines of 1.4 or 1.6 liters. One of the modifications of the second generation car was equipped with a 1.5 liter diesel engine. We will tell you what kind of oil to fill in Kia Rio, how to choose its labeling and not be mistaken with the brand.
The engines of these machines, with proper operation and timely maintenance, rarely cause complaints, they are modern and reliable, have good traction, and are unpretentious in terms of fuel quality. On the issue of their durability and maintainability, not everything is so simple (it refers mainly to the third generation), but before a run of several hundred thousand kilometers is hardly worth worrying about.
Kia Rio engine
The resource of any automobile engine is highly dependent on the quality of fuels and lubricants. Using only high-quality fuel and timely fuel can significantly extend the life of the engine and save the owner from expensive repairs for a long time.
Choosing marking and viscosity
In order to choose the right marking for engine oil, you must have at least minimal knowledge of the designations that manufacturers indicate on the packages. The main characteristic is the SAE viscosity grade. This indicator determines how well the liquid will be distributed over the internal working surfaces and protect them from premature wear. The numbers in the SAE designation indicate the frost resistance of the oil and its resistance to loss of properties when the temperature rises to +100 degrees Celsius. The lower these numbers are, the lower the viscosity.
The SAE viscosity grade determines how complete and effective the lubrication of the engine working surfaces will be under different conditions. This is especially important during start-up, warming up, negative temperatures, in the process of running in a new car.
Another important characteristic is the API and ACEA specifications. When using engine oil of the recommended specification, the wear of the friction surfaces of the Kia Rio engine, oil and fuel consumption, engine noise decreases, and the life of the catalyst and some other parts of the exhaust system increases.
What kind of oil to fill in the Kia Rio engine? The opinions of some manufacturers of lubricating fluids, as well as motorists, on this matter may differ. We strongly recommend that in this matter, first of all, refer to the recommendations of the manufacturer of the car itself. It is he who knows the smallest design features of engines, and he is most interested in their trouble-free operation throughout their entire service life.
To choose the right oil for the Kia Rio engine, take into account the temperature conditions in which the car will be used, and select the recommended viscosity values \u200b\u200bfrom the table.
Operating temperature range for Kia Rio engine oil viscosity
For maximum fuel economy and engine protection, it is recommended to select an SAE 5W-20 (API SM / ILSAC GF-4) engine oil. If these brands of oils are not available, select the one that is most suitable for your application. The most commonly used in our country and widespread on sale is a liquid labeled 5W-30.
Good day! We must finally continue the topic of choosing mesel in Korean cars! Today on the agenda is the question: Most of the information on this issue is contained in the article. I recommend that you familiarize yourself with this material.
And we will continue our topic. So, what kind of oil is poured into the Kia Rio? I think, asking the search engine this question, you planned to find it. If so, then you have come to the right place. And now to business!
What kind of engine oil is used in Kia Rio?
When answering this question, the generation of the machine should be considered initially. And, as you remember, KIA RIO has three of them. If we proceed from the quality of the oil, then in the first two generations it is required to fill in the simplest oil, and in the last - only modern ones. From a scientific point of view, the first generation is very unpretentious to the quality of the oil. Oil with a quality class according to API - SL, according to ILSAC - GF-3 is suitable here. Now there are few such oils. therefore, higher quality fluids such as API SM or SN, ILSAC GF-4 or GF-5 can be filled. Nothing terrible will happen from this for sure.
In the second generation, it is recommended to fill in oil with a slightly higher quality class, and it is called API SM and ILSAC GF-4. As with the first generation, you can do better. But worse is not recommended. In any case, the engines on the Kia Rio are very simple in constructive terms, so it is very difficult to harm it with lower quality oil.
The third generation of Kia Rio is distinguished by more demanding engines. Only the highest quality oils can be used here - API SN and ILSAC GF-5. It is quite logical. Since the engine is required to be economical, and environmental standards are completely squeezed from all sides. So the requirements for oil quality have become more stringent. But I think this is not such a problem. Now the vast majority of oils are produced with just this quality class.
Above we were talking only about gasoline engines. As you remember, there are also efficient units in the Kia Rio lineup. Unfortunately, I can't read minds and I don't know what kind of engine your car has. Therefore, I will immediately describe here the requirements for a diesel engine. Diesel engines must be filled with API CH-4 oil.
Now let's talk about bribery. This is the most difficult topic among KIA Rio owners, and not only. How many talk has already been about this, but still many people do not understand the whole point. The fact is that the viscosity of the oil must correspond to the one recommended by the manufacturer. In the case of Kia Rio, the viscosity should be no higher than 5W30. And for engines with a VVT-i clutch - generally 5W20. On new engines it is better to use only 5W20 viscosity, and on engines with high mileage - 5W30. This is not such a strict requirement, but only a recommendation. If there is 5W20 - pour it. There is no way to purchase 5W20, then we fill in 5W30. And only so. The requirement applies to both gasoline engines and diesel engines. This is primarily due to the fact that the gaps between rubbing parts in modern engines have become very small. Accordingly, more viscous oil may not penetrate these gaps. Thus, the engine runs practically without oil. Hence the wear and tear and further oil consumption.
As for the manufacturer, then here you decide for yourself what oil to pour in Kia Rio... Now there are a lot of liquid manufacturers. There are original oils, there are oils from third-party manufacturers, there are expensive and budgetary ones. Which is better is up to you. The main thing to remember is that there is no bad oil. There is only oil that does not meet the requirements. That's all, until we meet again.
Oil selection table for Kia Rio (KIA Rio)
At the end of the article, I just could not help but add a good table on the filling volumes of Kia Rio engine oils. Study this table carefully to know how much oil is in the Kia Rio engine.
| Engine | Years of release | Oil volume | ||||
| Volume, l | A type | Power, h.p. | Start | Ending | For engine | For oil filter |
| 1.1CRDi | D3FA | 75 | 2011 | present time | 4,8 | 0,5 |
| 1.25i CVVT 16V, 1.25i LPG 16V |
G4LA | 86 | 2011 | present time | 3,3 | 0,3 |
| 1,3i | G4EE | 75/82 | 2000 | 2005 | 3,4 | 0,2 |
| 1.4i 16V | G4EE | 97 | 2005 | 2011 | 3,3 | 0,3 |
| 1.4i 16V | G4FA | 107 | 2011 | present time | 3,3 | 0,3 |
| 1.5i 16V | 98/108 | 2000 | 2005 | 3,4 | 0,2 | |
| 1.4 CRDi | D4FC | 90 | 2011 | present time | 5,3 | 0,5 |
| 1.5 CRDi | D4FA | 109 | 2005 | 2008 | 5,3 | 0,5 |
| 1,6i 16V | G4ED | 112 | 2005 | 2011 | 3,3 | 0,3 |
| 1,6i | G4FD | 140 | 2011 | present time | 3,3 | 0,3 |
That's all! Until next time on our website!
If you bought a car, you probably dream of an engine that can serve your "iron friend" as long as possible. Therefore, the use of lubricant for the motor is the most important issue that worries any motorist.
[Hide]
The best engine oil for Kia Rio
Viscosity, which is the main and main indicator of engine oil, is able to determine the degree of its fluidity. For any car, an engine oil change should be timely. Engine oil for Kia Rio 2014 provides complete protection for almost all internal engine components.
Do not forget that in the 2013, 2012, 2014 Kia \u200b\u200bRio, as in other models, the oil filter should also be replaced along with the lubricating product.
Engine oil for Kia Rio is chosen based on the data that is in the car's operating instructions.
Lubrication products for Kia Rio 2013, 2012, 2014 release can be considered budgetary and affordable options.
Shell Helix Ultra
Shell Helix Ultra can be called a leader among oils that have shown excellent results.
The composition of the fluid contains an optimal set of additives, which makes it possible to use engine oil in aggressive environments.
Starting the engine showed that the lubricant retained the properties that were declared by the manufacturer, which makes it possible to protect the engine.
Total quartz
Has no less worthy composition. In addition, it is an oil that is ready to cope with fuel to such an extent that a high percentage of sulfur will not interfere with it. It can be praised for both quality and price.
High mileage can not destroy the working properties of the lubricant.
Divinol
Divinol is the engine oil that offers the lowest fuel consumption as well as excellent engine protection against wear. Noteworthy is the level of base number and acidity.
You can, of course, complain about the not very good promotion of the brand, however, we can note the fact that the owners of Rio 2013, 2012, 2014 are increasingly using the appropriate composition of this product.
ZIC XQ LS
LS is a product with a reasonable price and good quality. The oil has a fairly considerable resource of additives and a fairly reliable protection against engine wear.
However, there is a fact that the substance is not approved.
How much to fill
In a new car, the first lubricant change is made after three thousand kilometers, since during this period the engine is run in and running in, as a result of which abrasive particles appear in it, which must be removed.
In the future, the lubricant is replaced at intervals of every 10 thousand kilometers.
As a rule, during the procedure, approximately 3 liters of oil is poured into the engine.
Check the lubricant level, which should not exceed the "F" mark.
Replacement steps
Before starting to change the lubricant, you must make sure that you are using a lubricant recommended by the Kia Rio manufacturer. Do not forget that with the purchase of a lubricant product, you definitely need to purchase an oil filter, as it is not recommended to use an old filter!
It is convenient to use an inspection pit for self-changing lubricant. In her absence, raise your Kia Rio on a jack.
What tools will be needed
- when changing engine oil, use rubber gloves;
- you will need a socket wrench to open the drain plug;
- an open-end wrench is suitable for replacing the oil filter;
- dirty lubricant should leak into some container, which can become a bucket or bottle;
- stock up on newspapers and rags.
How to properly drain the oil
During such a procedure, accuracy is important in order to burn yourself with hot oil.
- The automatic transmission requires the setting of the "Parking" mode, and the manual transmission requires the activation of the parking brake.
- The wrench will help you loosen the crankcase plug. The stopper gasket must not stick to the pallet. Installing a plug without a gasket is fraught with the fact that the working substance will gradually flow in the future.
- Next, you need to unscrew the engine sump plug, and then let the spent lubricating fluid drain, for which you must substitute a container under the drain hole.
- Use a syringe to pump out any remaining dirty grease from the sump.
How to fill
As soon as the fluid is drained, unscrew the oil filter, fill in new with fresh lubricant, and then screw the filter.
If you are unable to unscrew the old filter by hand, then it is better to do it using a special puller or in another convenient and accessible way.
Lubricate the filter gum with oil.
A new gasket for the sump plug is also needed.
Having opened the hood of the car, pour 3 liters of lubricant into the engine through the filler neck, then start the car for a few seconds and make sure that the "oil can" on the dashboard has gone out.
You can look under the car with the engine running and make sure that the substance is not leaking.
Video "How to change the oil in Kia Rio"
Check out the video on how to change the oil in a Rio engine.
Choosing the right engine oil will prevent wear and help keep your car engine running smoothly. In this article, we will tell you what oil to fill in the Kia Rio engine. In addition, you will learn how to determine the frequency of work to change the lubricant and oil filter and how to perform these work yourself.
[Hide]
About replacement frequency
The operating manual, which is relevant for cars in 2010, 2011, 2012, 2013, 2014, 2015, 2016, recommends changing the oil every 15 thousand kilometers. However, in practice, this recommendation is only suitable for operating the machine in optimal conditions, which is not always feasible in Russia and the CIS countries.
The city streets are congested, cars move at low speeds, and stand idle in traffic jams. Under such conditions, the motors are idling for a long time, and this does not affect the speedometer readings at all. Also, the quality of fuel at filling stations significantly affects the replacement period, which does not always correspond to the required parameters. Therefore, the optimal mileage of a car between replacements of engine lubricant will be about 10 thousand km, and when operating in difficult conditions it will be reduced to 7-8 thousand km.
Some experts advise, when determining when to change the lubricant, use the readings of the on-board computer. With its help, you can easily find out the average speed of the machine. If this indicator is more than 50 km / h, you can safely operate the power unit up to a mileage of 15 thousand km. If it is in the region of 30 km / h, the mileage is reduced to 10 thousand km.
Watch a video about oil change from user Mikhail Knyazev.
Possible causes of oil consumption
This problem occurs even in brand new cars, but most often this "disease" accompanies cars with significant mileage.
Increased oil consumption can be caused by:
- the presence of leaks in the power unit;
- wear of the cylinder, pistons, rings;
- increased clearance between guide bushings and valve stems;
Typical causes of these problems:
- improper operation of the machine;
- driving in dusty conditions;
- work for a long time at idle speed;
- frequent movement at high speeds.
Which oil is better to choose
The lifespan of any automotive engine depends on the quality of the lubricant used.It can be difficult to independently decide on the right choice, since trading platforms are filled with a large number of motor oils from different manufacturers and of different quality. Review the recommendations of the car manufacturer, listen to the advice of experts, and only then determine which oil to fill in the Kia Rio engine.
Engine oil for Kia Rio QUARTZ grease HELIX ULTRA oil HELIX oil
Motor lubricants are distinguished according to the season of use:
- winter lubricants;
- summer oils;
- multigrade engine oils.
These products are based on the following materials:
- mineral oils;
- semi-synthetic;
- synthetic.
The manufacturer recommends using synthetic-based oils for the Kia Rio. Various additives are added to such a product that improve wettability, have anticorrosive properties, and increase wear resistance. The viscosity of the motor fluid recommended by the manufacturer is 5W-20, 5W-30. Also, multi-grade oils with a viscosity of 10W-40 have become very popular.
If the owner decides to change the lubricant on his own, he should take into account the existing features of the power units of these cars.
- Shell Helix Ultra;
- Total Quartz;
- Divinol;
- ZIC XQ LS;
Shell Helix Ultra is the most suitable option from the list presented. It has a complete list of the necessary additives that ensure a long machine life. Total Quartz also has a good set of additives. Divinol grease has the lowest consumption. Liquid ZIC XQ LS can also be safely used for this machine. In addition to the listed lubricants, they use the products of Mobil, Castrol, and some others.
Choosing a filter
Oil filter
Replacing engine lubricant in a Kia Rio car implies a mandatory replacement of the oil filter. For individual engine modifications, oil filters with different catalog numbers are used. For a power unit with an engine capacity of 1.4 liters, the filter has a catalog number 2630002503, and if the volume is 1.6 liters, the number is already 2630035504. Its cost can start from 200 rubles, it depends on the manufacturer of the spare part and the markup of the retail network.
Level control and required volume
The amount of fluid to lubricate the engine depends on the type of engine and its volume.
| Engine | HP | Year of release (beginning-end) | Engine oil volume, l | Filter, l | ||
| 1.1 CRDi | 75 | 2011 | —> | 4.80 | 0.5 | |
| 1.2i 16V | K1.25 | 87 | 2011 | —> | 3.30 | 0.3 |
| 1.3i | MI-TECH | 75/82 | 2000 | 2005 | 3.40 | 0.2 |
| 1.4i 16V | G4EE | 97 | 2005 | 2011 | 3.30 | 0.3 |
| 1.4i 16V | Y-1.4 | 107 | 2011 | —> | 3.70(3.30) | 0.3 |
| 1.5i 16V | 98/108 | 2000 | 2005 | 3.40 | 0.2 | |
| 1.4 CRDi | 90 | 2011 | —> | 5.30 | 0.5 | |
| 1.5 CRDi | D4FA | 109 | 2005 | 2008 | 5.30 | 0.5 |
| 1.6i 16V | G4ED | 112 | 2005 | 2011 | 3.30 | 0.3 |
| 1.6i 16V | 123 | 2011 | —> | 3.30 | 0.3 | |
Before checking the oil level, it is necessary to turn off the engine after a trip and wait 5-10 minutes until the fluid drains into the crankcase.
Instructions for measuring the level and adding grease:
- Place the machine on a level, horizontal surface.
- The dipstick is located at the front of the engine compartment, the filler plug is on the right side of the cylinder head cover.
- Take out the level meter, wipe it with a rag and put it back in place.
- Remove the dipstick again. The lubricant level should be between the Max and Min marks.
- To add oil, turn the oil filler plug counterclockwise and remove it.
- Oil must be poured into the engine, controlling its level on the dipstick. Before removing the level gauge, wait a couple of minutes for the oil to drain into the crankcase.
The engine lubricant must be of the same brand, viscosity and quality class as the previously filled one.
DIY engine oil change
There are two ways to replace engine lubricant on a Kia Rio car: this is a vacuum pumping of the waste fluid or the standard method of draining old oil. For the first case, you will need special equipment that pumps out the lubricant through the hole for the dipstick. Such equipment is not available in all service stations, but in personal garages it is absent due to the high cost.
It is much cheaper to replace it in the standard way, in which the used lubricant is drained through the drain hole. This method is considered more reliable, since most of the sediments and contaminants are collected in the lower part of the sump, from where they can be completely removed.
Required tools and consumables
In addition to fresh oil, you will need the following:
- oil filter;
- drain plug sealing gasket. Catalog number 21513-23001;
- empty containers of the required volume to collect used oil;
- rags to remove spilled grease;
- a “17” wrench or similar head.
In some cases, it may be necessary, 3 liters will be enough.
Algorithm of actions
The engine oil is drained from the engine only when it is hot. This can be done at the end of the ride, or the motor can be run for about 10 minutes.
Important! When draining oil on a hot engine, be careful not to burn yourself.
The procedure will be something like this:
- The car is installed on an overpass, elevator or above a viewing pit. After that, you should place stops under the wheels.
- The crankcase guard prevents the lubricant from draining, it must be dismantled.
- After that, the waste liquid is drained into an empty container. Before this, carefully unscrew the drain plug. The cap of the oil filler neck is first removed, this will accelerate the flow of the lubricant.
- Now remove the oil filter and install a new spare part.
- The drain plug is cleaned of impurities, a new gasket is installed on it, and then screwed into place.
- The required amount of engine lubricant is poured into the engine, how much it was reported earlier. The volume of the poured mixture is controlled by a measuring probe. The lubricant level should be between the Min and Max marks.
Such an operation does not cause any particular difficulties for the owners. It is easily done in the garage with your own hands.
Filling engine oil into the engine
Filter replacement
Some difficulties can be caused by removing an old oil filter. On a hot engine, it has a high temperature, so work with gloves. It is not always possible to unscrew it by hand; you can use various devices to dismantle it. Some drivers punch through the filter housing with a thin screwdriver or punch, and then use this tool as a lever to turn the filter out of place.
Before installing a new filter, fill it with fresh oil. It will be enough to fill in 150-200 grams of grease, lightly grease its O-ring with oil. After that, install the filter element in its place. To seal the filter, it is enough to tighten it by hand, in the future this will make it easier to dismantle the product that has served its life.
KIA RIO FAQ user shows oil and filter change in video
Consequences of untimely replacement
If the timing of the oil change is not observed, accelerated wear of the engine parts occurs. Modern oils have additives that improve their properties. Working at high temperatures, these additives gradually burn out, the lubricant performance deteriorates. As a result, oil starvation can occur, which can cause cranking of the crankshaft liners.
Parts of the turbocharger compressor suffer greatly from the used oil. Contaminated grease clogs the oil supply channels, which can cause seizure of the shaft of this unit or other mechanisms. Old oily fluid does not dissipate temperature well from overheated engine parts, which also has a bad effect on its condition.
