Surely, any vehicle owner will sooner or later face problems when starting a car engine. There may be several reasons for this: a dead battery or electrical problems. In any case, sometimes starting the engine from the pusher is the easiest and most effective way to start the engine.
In order to be fully armed and not to be trapped in an unforeseen situation, any car owner should know how to start the car from the pusher and what nuances must be taken into account. First, you first need to understand whether it makes sense to push your car at all. To understand this, it is necessary. If the starter turns the engine, but it still does not start, there is no point in pushing the car. Most likely, your car has run out of fuel, or has occurred.
Before starting the process itself, you need to take into account the individual characteristics of your vehicle, such as the type of gearbox and the type of engine itself.
Is it possible to start a machine gun from a pusher
How to start a car with automatic transmission from a pusher
If your car is automatic, it is better to leave the theory alone and resort to towing.
There is a lot of controversy regarding cars with an automatic transmission. However, starting a car with automatic transmission from a pusher is possible only in theory. But in practice, the technical features of machines with an automatic machine do not provide a rigid connection between the power unit and the box when the engine is turned off. Thus, no matter how far you push your car, it will not start, and the box itself may suffer.
There is a theory of how to start a car automatically from a pusher. To do this, you need to turn on the ignition, move the gearbox lever to the N-position and accelerate the car to 50 km / h. The gained speed must be maintained for 10 minutes, then move the gearshift lever to one of the positions - 2.3, D. In theory, the engine should work, but any sane person understands perfectly well that pushing a car at a speed of 50 km / h, especially for 10 minutes, is simply not realistic. Therefore, if your car is automatic, it is better to leave the theory alone and resort to towing. When you should use the method described above and observe the necessary safety measures.
How to start a car from a pusher on a mechanic
Before dealing with the question of how to properly start the car from a pusher with a manual transmission, it is necessary to take into account an important aspect - you have a carburetor or an injector.
So, in order to start a car with a carburetor, you must:
In order to start the car from the pusher, a fairly simple algorithm of actions should be followed.
- turn on the ignition - this will activate the operation of all systems of your car;
- squeeze out the clutch;
- turn on the second or third speed;
- press the gas pedal several times (no more than 2-4 times, otherwise you will fill in the candles), or turn on the suction (if any);
- you can start pushing the car;
- as soon as the car accelerates to the required speed (8-10 km / h), you need to very smoothly release the clutch pedal;
- the engine should start, now you need to squeeze the clutch and stop the car, put the pushers and continue driving.
In the case of an injection car, you need to carry out all the same manipulations, with the exception of turning on the second / third speed.
Is it possible to start a diesel engine from a pusher
Before trying to start a diesel engine from a pusher, you must consider the possible unpleasant consequences for your car. If handled incorrectly, attempting to start the engine from the pusher can cause a number of serious breakdowns, including timing belt problems.
But if you nevertheless decide to resort to this method, then you need to act according to the method described above, that is, by analogy with carburetor cars. With the only amendment, it is better to start the engine in higher gears (3-4 gears).
How to start a car from a pusher alone
To start the car from the pusher, one will have to sweat a lot, showing a certain dexterity and coordination of movements.
If you have several passengers in your car or you are on a section of the highway with heavy traffic, then you will not have any problems with how to start the car from the pusher. But there are situations when you are left alone with the malfunctions of your car. And how to act in such a situation?
Firstly, do not be upset, even alone, if you wish, you will cope with the task at hand, although it will not be entirely easy. In principle, you need to act according to the scheme already described, taking into account the fact that you still need to accelerate the car yourself. To do this, turn on the ignition, open the driver's door and get out, with one hand we correct the direction of the steering wheel, and with the other we try to accelerate the car to the required speed. Once the speed is reached, jump into the car and start the engine.
But you need to really look at things, not every man will be able to cope with a physically difficult task, not to mention girls. Therefore, it is better to try to ask for help from passing vehicles and resort to towing, or call and call the maintenance staff.
Before starting the car from the pusher, you need to take into account all the features of your car, since improper actions can lead to serious problems.
- If the battery is not completely discharged, you can help with a push starter.
- It is not worth pushing the car, to be located in front of the exhaust pipe - strong exhaust can stain you.
- Always carry a halyard or tow rope with you in your car.
- Dedicated wires can be used to avoid having to use the pusher method.
- Before trying to start the car from the pusher, you need to take into account all the individual characteristics of your vehicle. Since incorrect actions can lead to serious damage, the repair of which will take not only time, but also will not cost so cheap. Therefore, it is good to cock all the pros and cons, and only after that resort to a similar method and follow all the above recommendations, then you can avoid a number of serious problems.
- On snow, gravel, sand, unpaved surfaces, or when the treads on the rubber are worn, it is best to engage third gear to prevent wheel spin.
