"Movil": what it is and for what is used. Movil for cars: features of processing the car do it yourself Movil for cars how to use a brush

Rust on the car body arises at different speeds, but they are subject to any cars, even new and expensive. The reason is the effect of aggressive factors - water, salts, reagents, acids. To prevent serious problems, you can use Movil for cars - a means based on rust converters and protective components.

Composition, characteristics and principle of action Movil

Abbreviation "Movil" has formed from the names of cities (Moscow and Vilnius), in which this anti-corrosion composition was created for the first time. Now Movil is not a specific product, but a whole direction in the issuance of funds against rust, which are manufactured by various companies in Russia, CIS countries.

Under Movil, universal anticorrosive anticorrosive in the form of liquid, spray, black or dark brown paste, intended for processing body and hidden car cavities. Also, the remedy will help save the elements of the machine in integrity and protect them from rust if it has to be put on preservation.

The composition of the fund is quite complicated. It is represented by such ingredients:

white spirit solvent;
paraffin;
zinc;
machine oil;
calcium sulfonate;
kerosene;
olife;
modifying additives;
corrosion inhibitors;
thixotropic substances;
supplements for moisture displacement;
deodorizing components.

Movil is suitable for any base materials, well falls on painted and unpainted surfaces, does not require pre-removing bitumen or mastic insulation. Incompatible product only with synthetic mastic - the latter become loose, pee out the basis. Also, the rubber products are poorly reacting - the composition can damage them.

Due to thixotropy, the remedy rates quickly in the smallest slits, microscopic chips, fills them and creates an active anti-corrosive film. A thin oily layer prevents rust formation, insulating metal from moisture, air, aggressive chemicals - corrosion perpetrators. Movil works as a rust converter, eliminating already formed foci due to the presence of special additives.

Movili different stamps can differ density, freezing point, other indicators, but most products have specific characteristics approach:

metal spreadability - up to 10 mm;
the share of volatile substances - up to 57%;
density - 840-860 kg / kV. m;
time to complete drying - about 120 minutes;
corrosion resistance in sea water - 99%.

For which surfaces Antikor Movil is designed

Movil with rust converter can be used on any metal bases. They are allowed to work in corrosion, as well as on intact metal, painted and lacquered surfaces. Most often, car owners prefer to use the composition for processing closed cavities and complex elements:

the front racks of the roof - the condensate accumulates on them, which over time causes the appearance of rust;
thresholds - the presence of holes on the details provokes moisture penetration;
hidden cavities in the trunk - felt can accumulate water, which enhances the risk of corrosion;
the inner surface of the doors - condensate, dirt here appear constantly;
the fastening zones of seals - moisture regularly accumulates under the sealing elements and causes rusting of the metal.

It makes no sense to apply Movil on the bottom, wheel arches, open body parts - it does not boast of high mechanical strength (exception - special movie increased strength). Also due to a strong chemical smell associated with the presence of a solvent, it is impossible to use the product in the cabin. It is forbidden to spray Movil on rubberized parts, as well as the surfaces on which there is a layer of synthetic mastic.

How to choose a tool

The choice of Movili in the market is styled, there are funds in the canister and pasty, liquid in the canes and draft. The form of the product is selected depending on the application zone. If the processing of hard-to-reach places is planned, it is worth buying an aerosol with a special long nozzle (flexible tube). A special pistol for Movil is needed to the spill tool - the composition is refilled into a similar device, after which it will be convenient to handle even large surfaces.

The highest quality, according to motorists' reviews, differ Movili production Moscow and St. Petersburg, and products from Lithuania usually have less efficiency in action.

Also in stores there are so-called long-haired Movili, which have a higher elasticity, are thick, create a durable protective layer that does not respond to mechanical damage.

Movile manufacturers

Most often on the shelves of automotive stores you can see the means of the following brands:

"Astrochim";
"Agat-Auto";
"Eltrans";
"Development of the PCF".

All specified compositions have excellent quality and are valued by car owners and masters. Usually the drug in the canister is much more expensive than liquid Movil, which is applied with a brush.

How to use Moviel

The composition can be applied to the metal, purified to the "naked" species, as well as the painted and primed base. In the cold season, the tool is better not to apply - the processing efficiency drops already at +10 degrees. With too hot weather (above +40 degrees), Movil is also not used, so the best time to work with it is the end of summer, spring, early autumn. To avoid damage to rubber parts, they must be removed in advance or reliably close.

Preparation of car

Future processing zones Movil must be qualitatively prepared. They are brushed from dust, dirt, and the best thing for this purpose is a portable car wash with a water jet pressure of 60-100 atmospheres. If the product is to be applied on the bottom, the car wash is carried out on the lift. In order to remove oil spots and deposits of petrochemistry, special detergents apply.

When the car detail is already covered with a thick layer of rust, the latter needs to be cleaned with the help of sandpaper or grinding machine. This item especially concerns loose rust, which, after processing the Movil, will immediately begin to peel. The same rule refers to the cracked paint. Immediately before work, the surface is dried outdoors or a forced method (for example, by connecting the compressor). Deep chips, pits on metal close to auto-suck before applying anticore.

Than dilute Movil.

The composition with zinc and corrosion inhibitors in the form of an aerosol is realized in the finished form, and it will not be possible to dilute it, and should not. The same rule refers to liquid in banks, canes: the addition of solvents and other substances will strengthen the flow fluidity, while it will reduce its quality. Of course, when the White Spirit is infused, the solvent will dry even faster, but the strength characteristics of the film will decrease greatly. At the slightest impact, the formed coating breaks due to poor surface tension.

Pasto-shaped motley sometimes thicken too much and require breeding, otherwise they are quite difficult to apply them. It is not necessary to use solvents: it is better to heat the composition in a water bath to make it more liquid. Careful heating is allowed such a number of times that will be required.

How to apply Movil

The product is important to apply a uniform layer, the thickness of which after drying will be 40-60 microns. The consumption of Movil in this case will be approximately 400 g per square meter of the surface. The highest efficiency means when applied to several layers (usually 2-3).

Movil is sprayed on the base of a cylinder with a long thin nozzle or work using a gun. Since the application is performed under pressure, the active composition penetrates into all slots, cracks and hard-to-reach places. On open areas and extensive zones, it is better to apply Movil's tassel. The time of intermediate drying of the layers should be observed (20-30 minutes), as well as to withstand the period to the complete drying of the Movil (2 hours or according to the manufacturer's recommendations).

Tips for working with anticorrosive:

before starting, it is worth a remedy for the trunk, the door to see how it spreads - in the future it will be possible to navigate through the most comfortable method of spraying and approximate consumption;
if the composition fell on a paintwork, it should be immediately lined with a soft cloth - then it will be difficult to do it;
in the car after use, the Movil often saves a sharp smell, which can be removed, only leaving the windows of the car open at least a couple of hours a day (at first);
if the car ventilation does not help in getting rid of the "aroma", coal smell absorbers can be used;
the ideal option is not to use the machine for 2-4 days after applying the coating, and only then allow it to use.

Treatment of hidden cavities

To process the inner cavities of the car, they first dismantle all the elements that are removable and can interfere with the workflow. If possible, there are drainage holes, they are washed and dried with a jet of warm air. In the presence of a durable rust, it is removed by the converter and washed with an alkaline solution. Next attach the tube-nozzle to the canopy, injected into the cavity and spray Movil.

Processing of the bottom Movil

The bottom should be treated with particularly durable compositions, because it is subject to strong mechanical loads. Usually, this body element passes anticorrosive treatment at the factory, but as aggressive factors are affected, protection is weakening. In this case, the work should be repeated by selecting the long-haired Movil.

Procedure Next:

wash the car, put on pit or flight;
clean the metal to the brilliance in places where the rust already has;
remove the blown, layers, rotten driving holes, cutting all the damaged zones in advance;
process to the metal;
dismantle the elements interfering
overlap the fuel supply faucet into the system, acting especially carefully in the presence of gas equipment;
well dry the bottom with warm air;
apply Movil in 2-3 layers with a brush, by airless spraying;
dry for 2 hours;
collect the car by attaching all the details shot.

Treatment of thresholds

Application of anticorrosive thresholds is a time consuming occupation, but it is necessary to prevent corrosion development. To begin with, partial disassembly of the cabin, removing all plastic elements. When removing linings, you need to be careful with the clips and latches - if you break them, the elements will strongly rattling when driving. After you need to take the following:

turn out insulation;
finding ready-made holes or drill them along the outer part of the thresholds (the second method is undesirable to execution);
apply Movil from the can, starting a thin nozzle right into the hole;
press the sprayer, fill the walls of the Moviel thresholds (for each to use no less than 1/3 of the spray);
give the medium to dry completely;
close the dried holes with rubber inserts (buy them separately in the auto shop).

Door processing

Usually doors begin to rust from the bottom. If corrosion elements appear on them, it is necessary to clean the zone, predict, paint, and only then process Movil. The holes are brewing either close to auto-suck, although the second method is short-lived. After removing the handles of windows, unscrew the fastening screws and bolts, get the latches, remove the door cards. If they enter wires, they are neatly disconnected by writing the correct connection. After you can wash the door, dry and apply Movil. As it dries it, you should return all the removed items into place.

Arch treatment

To apply a means to the arches, the shrinkles are first removed, unscrew the screws with a cross-shaped screwdriver. Then they wash well and purify the arches, dried and apply an anticorcore in the standard way. So that in the future it is easy to unscrew the screws, you can process the place of twisting bolts with machine oil.

If the temperature is close to the lower permissible to work the limit (+10 degrees), drying time will increase to 3-5 hours, with fierce air - will be reduced to 1.5 hours. During the specified period, Movil will form a fuel film that will continue to thick for another 10-15 days.

Than laundering Movil

Since aggressive solvents cannot be applied to the car LCP, remove the dried Movil will not be easy. It is permissible to use aviation kerosene, isopropyl alcohol, a mixture of turpentine and shopping soap (50:50). You can also rub the Movil gasoline, but after removing the spot, it is necessary to immediately wash the part with a car with a car suck.

Precautionary measures

Working with Movil is standing in the fresh air, because its evaporation is toxic. If it is applied in the garage, it is important to provide high-quality ventilation, otherwise the effects for health will be serious. Be sure to wear a respirator, glasses, gloves and not allow Movil's contact with skin. The tool is easily flammable, and it is necessary to work with it away from heat sources, fire!

If you regularly examine the car, evaluate its condition and produce anti-corrosive processing, parts will serve an order of magnitude longer. To combat rust it is worth using Movil, which boasts affordable price and excellent quality.

Movil is a wax coating designed to protect the metal from corrosion. Great suitable for both open surfaces and hidden places.

Advantages and disadvantages of funds, features of the composition

Movil has the following advantages:

protects the metal from rust due to instant sealing and surface insulation;
interacts with any kind of paints and varnish coatings;
easy to use.

But, despite a number of advantages, there are also disadvantages, which should also be paid attention to:

in case of a rubber or plastic surface, it quickly leads it to disrepair;
the smell, unpleasant and toxic, weathering enough long (several days);
it looks ugly.

All this is due to the composition of the substance. The autoconservant is a film-shaped oil mixture. The main ingredients of the substance are inhibitors, olifes, kerosene, rust converter and engine oil.

Wide range of products on the market

Moviel producers and species are quite a lot. The main differences are in the functional characteristics and the availability of additional substances. For example, Movil with zinc.

The substance can be bought in three versions: liquid, aerosol and paste. It will be determined which one is suitable. It is better possible on the basis of what kind of autoconservant is more convenient.

The process of preparing the car before coating

Most often, Movil is handled the following body elements:

Thresholds;
Racks;
Headlights;
Doors' pockets;
Spars;
Car arches;
Bottom;
Glasses.

All these places before processing need to be cleaned of dust, dirt and oily sediments. This can be done with the help of a portable car wash with the addition of detergents.

After that, it is necessary to completely get rid of moisture on the surface being processed. In dry and warm weather - it is enough just to give the car body to dry for several hours. In the cold time - you can use the compressor with warm air.

Next, it is necessary to carefully examine the treated surface. Application of Movil on rust or disintegration of paint deprived of meaning. Only after complete stripping, degreasing and drying can be moved to applying a substance.

How to apply Movil?

Specialists recommend to process a car every two years, and residents of large cities should be resorted to the processing of the bottoms and thresholds of the machine before each winter. This is necessary in order to prevent the emergence of rust and "save" a car from rotting.

In the processing of the body, the Moviem exists nuances. Here are the main of them:

It is worth remembering that the tool does not interact with synthetic materials and in contact with them leads the latter into disrepair.
Do not handle the bottom surface and car thresholds if they are already treated with mastic.
If the oxidizing agent hit the paint coating, then this area immediately, it is necessary to process the purifier of bitumen spots.

How to use Movil in hard-to-reach places?

It is best to use aerosol for processing such places. You can connect the rubber tube to the sprayer, which will easily provide access to all hard-to-reach places.

For the processing of the car body, sprayers with a pressure of 3-11 MPa are fully suitable.

Nuances when used

Very many drivers prefer to engage in the prevention of their cars on their own. However, it is necessary to understand that masters from the service have experience in the use of different anti-corrosion products. An unprepared person needs to take into account some details when using Movil's independent use:

The autoconservant has a specific odor, so it is not recommended to use it for processing metal parts in the cabin.
When applied to open parts of the car (roof, wings, hood, doors), it is worth remembering that after drying, the coating acquires brown color.
Apply the means is necessary on the welding seam. It is worth working very carefully. If you get on not metal parts of the car, the latter will most likely be damaged.
It is necessary to refrain from traveling on your vehicle several days, as the smell from Movil is not only nasty, but also dangerous.
Movil, if necessary, you can dilute by oxidizing agent.
Apply better in 2-3 layers.

Before independent use of the anti-corrosion substance will not be superfluous to consult with specialists. In addition, there are a lot of videos in the network, where the masters clearly show the use methodology.

Precautions during use

When working it is necessary to follow the following security rules:

Conduct treatment is necessary in a well-ventilated room. The composition of Movil includes substances, when inhaling the steam of which, you can get poisoning.
It is necessary to work in protective clothing, glasses and gloves. When liquid enters the skin, it is necessary to rinse it immediately with its White alcohol (Slotart solvent, NEFRA-C4-155 / 200) or water.
To prevent volatile poisoning, it is not recommended to use the automotive agent for 3 days after the procedure. Movil dries long.
Store the material is needed in an inaccessible place for children, in a closed container and at a temperature not higher than 25 degrees and not lower than 0.

The body of modern cars is able to withstand through corrosion on average from 5 to 10 years, in the future gradually rust begins to "eat" body parts, with time on the bottom, wheeled arches appear rust foci. In order for the body of iron as long as possible, special protective agents are used, in particular, Movil is used to process the lower part and hidden body cavities.

The anti-corrosion coating protects the metal from premature rust, which occurs as a result of the negative effect of the environment, the metal corps due to the interaction with water (moisture) and oxygen. Various bitumen mastics, special chemical compositions applied to body iron, allow to extend the metal resource, push the period for the next repair.

Compositions to help protect body and body parts from corrosion

For the car, the industry has developed various anti-corrosion products (anticorrosions), having different chemical components, but perform the same function. The most common brands of protective body iron compositions:

Movil various modifications;
Dinitrol;
Noxudol;
Tetell;
all kinds of mastic;
Apply antishe and so on.

These preservatives are processed by the bottom of the car and amplifiers, wheel arches, hidden cavities, including doors from the inside, thresholds, anticorrosive coat the floor inside the cabin. Important qualities of such drugs - tightness, plasticity, ability to resist moisture and push it, good adhesion. If, even in a layer of an anti-corrosion coating, water or dirt will fall in very small quantities, the body will quickly rust, and then the premature body repair will be required.

Processing Movil - types of chemicals, methods of application

Such a protective remedy for corrosion as Movil appeared in the Soviet Union, the drug was developed by scientists from Moscow and Vilnius, and therefore its name consists of abbreviated words of these two cities. First of all, the chemical composition was intended for the preservation of cars, its dense elastic layer is able to reliably protect body iron from air and moisture penetration.

Standard components included in the anti-corrosion coating - olifa, machine oil, inhibitors are also solvents, currently there are various modifications of this drug:

Movil with zinc;
classic composition;
with rust transducer;
with natural wax.

Anticorrosive and according to the method of application, the standard version of Movil is a thick damaging liquid, preparations are produced and in the form of spray, they are sold in aerosol cans. Anticorrosive processing can be made using a brush or roller, but it is more convenient to apply a layer by spraying the pressure. If the Movil is packaged into the usual tar of the type of can, spraying is performed using a spray gun, and compressed air is supplied with a compressor.

Modern drug Movil is significantly different from the preservative produced in the USSR, the anti-corrosion agent for protecting the body is now being developed and manufactured by various firms, not only in Russia, but also in Belarus and Lithuania. The most famous manufacturers of the drug are most famous:

joint Stock Company Nikor (SPB);
PKF (Nizhny Novgorod);
"Stsmol" (Belarus);
"Agat-Auto";
"Astrochim";
limited Liability Company "Eltrans";
CJSC Elf Filling (the latter above the marked four firms - Moscow manufacturers).

Among the car enthusiasts, the Movil-NN brand of Nizhny Novgorod production and Movil-2M from Eltrans is largely popular, the preserving composition under the Kerry brand is also quite well known. The price of a preservative depends on the brand, the volume of packaging, the seller itself, the average cost of Movil in the canopy or a century of 400-1000 ml - from 130 to 500 rubles.

Protection of anticorrosive bottom and thresholds with their own hands

Before proceeding with the protective means of the thresholds and the bottom of the car, it is necessary:

carefully clean the treated surface from dust and dirt, blow out with compressed air;
before purging, it is necessary to dismantle all rubber plugs in order to gain access to the technological holes and blow all the dirt from the inside;
degrease out outdoor body parts (optional, but preferably);
to heat the Movil to a temperature of 50-60 degrees Celsius, dilute it with White-spirit (for 2 kilograms of the anticorre is needed 0.2 liters of White spirit).

To fill the thresholds of the anti-corrosion composition, it is necessary to use a powerful compressor and a spacing with a "tube" nozzle. All hidden cavities are filled with Moviem under pressure, then a smooth layer of the anti-corrosion agent is applied to the bottom surface from above.

When processing with anticorrosive, it should be borne in mind that the preservative sends a very unpleasant smell, so it is strongly recommended to work in the respirator. Movil without smell is practically not found (if you do not take into account imported aerosols in the vials), so you need to tune in that the unpleasant spirit will dislike long enough.

Pour Movil in the thresholds can be without using a pulverizer, in this case you will need a funnel and a piece of rubber hose, mounted in one design. The cavities are filled with anti-corrosion composition from above, it is often necessary to deal with the floor in the cabin.

Outside, anticorrosive is applied in two or three layers, the normal ambient temperature for processing is about + 20 ° C. Each layer must be given to dry for one-bed and two hours, on average, approximately 400 g of Movil is spent on one square meter of the treated surface. After drying, the anti-corrosion agent practically does not smell and does not get dirty, acquires a brown tint.

Use of Movil Aerosol

Anticorrosion composition in the cannters has its advantages:

due to the small size of the bottle, access is provided by almost any body surface, for processing hard-to-reach places, the balloon is equipped with a special pipe-tube;
to work with sprays, special equipment and compressor do not need, you can perform work in almost any conditions;
as a rule, such a remedy has not so sharp odor;
the car can be operated after a few hours after applying the anticorrium.

But the deficiencies of the aerosols are also not deprived, and the minuses are essential:

not so economically, the composition is consumed, it turns out a less smooth layer;
time for the processing of large parts of the body goes more;
the chemical in the form of a spray is more expensive.

With the help of a spray gun with a sprayer, it is convenient to handle small surfaces, for example, welding seams, before applying the bottle with an aerosol fluid, you must shake several times.

Corrosion on the car body is a real problem for many car owners. For example, if you need to save the machine and, accordingly, protect the metal of the body from atmospheric corrosion processes. Today there are several options for such protection - this is a passive method, active, as well as converting.

In the case of active method, special protective compounds are used on the surface of the metal stable compounds protecting the body from corrosion processes. One of the most famous and popular funds of this plan is the drug "Movil". Mix of motor oils, olifa, as well as inhibiting additives. Also, there are solvents - White spirit or kerosene. This drug forms a dense combined film on the metal surface, which does not let oxygen and water. And these are the main factors due to which iron rust.

Moscow-Vilnius

Many car owners enjoy "Movil", however, not all of them know that these are domestic development.

This composition was developed by a group of scientists from Vilnius and Moscow. At that time, Tell-309 was used for anti-corrosion treatment in the USSR, developed by specialists from Sweden. Tertilla-309 was particularly popular at the AvtoVAZ plant - "Movil", created by Soviet scientists, was largely superior to the Swedish.

Operating principle

Anticorrosion or conservative means "Movil" has a principle of operation based on the maximum fitting, as well as the insulation of metals. This makes it possible to be in dense contact with air and moisture, which are the main cause of corrosion on the bodies. In addition, thanks to the inhibitor, this composition immediately after applying begins to actively deal with corrosion foci.

For motorists, this is a big plus. Processing "Movil" can be carried out without the need to remove bitumen mastic. When the composition is applied to such insulating materials, it tightly covers the surface and passes through the protective layer directly to the metal through various cracks - this is a guaranteed insulation of metal from corrosion. If the corrosion processes are already running, then with the help of "Movil" you can stop the growing rust.

If you need to put the car on a long parking lot, the specialists are recommended to process the body as much as possible in all places, so that then, after the end of the storage period, take the car from the parking site in the original form.

But when using this preservative, it is necessary to remember that it is incompatible with various mastic on a synthetic basis. If "Movil" will begin to interact with such mastic, their disintegration will begin with the subsequent peeling from the metal surface.

The advantages of "Movil"

The remedy can be applied both on non-painted metal surfaces and on any coatings treated with varnishes and paints. After processing the metal, there is no need for drying. As a result of the application, a reliable protective layer is created, which not only does not let moisture to the metal, but also pushes it. Among other advantages are the lack of negative impact on metal and any paints. All this makes the tool quite effective when dealing with corrosion. Many motorists successfully use Movil. What it is? This is a powerful weapon to combat rust.

This drug is simply indispensable when it is necessary to defeat the corrosion foci in hard-to-reach areas of the machine. It differs from other means to its high fluidity - the substance easily penetrates even in minor slots and cracks.

How to prepare a car for processing?

First you need to prepare the surface, and then apply the "Movil" directly. Non-futured preparation that will make the drug even more efficient.

First of all, the car needs to be carefully laundering. If the bottom processing is planned, then it is clean when the car is on the lift. It is best to take advantage of a sink of high pressure with hot water. After the body procedure, you need to dry well.

Next, various defects are eliminated, which are on the surface of the metal. Swim rust should be removed. Then the anti-corrosion drug is applied. When the tool serves, the protective film will begin to form a layer from 40 to 60 μm.

How to use "Movil"

To get a maximum from this preservative, you need to know how to apply it correctly. Metal processing is carried out using a special tool - this is a gun through which the drug is sprayed.

Due to the spraying under pressure "Movil" penetrates into any gaps and cavities that have already been corrosion or those that need to be protected. Open areas can be treated with an ordinary brush.

After processing the site, the surface is degreased. It is best to spray the preparation at temperatures from 10 to 30 degrees. The option is more efficient if several will be applied, better than 2-3 layers.

It is important that Movil is applied to a uniform layer. First handle the trunk or doors. Further look, how it spreads. After that, it will be easier to understand how to work further so that the means is not dried to the ground.

About 400 g "Movil" will be needed to process the square meter of metal in one layer. Drying time is about 2 hours. The product can be supplied as a mass in a plastic container. Movil-aerosol also exists, but minus such packaging is small.

If the tool accidentally falls on cleaning it will be very difficult. In the case of drops on the paint, they are cleaned immediately (until they frozen). If there are any plugs on the body, it is better to remove them so that the anti-corrosion substance can easily get into any places.

How to choose the right "Movil"?

So, the market offers a lot of products with a common name - "Movil". What it is? Many manufacturers offering a corrosion protection product, refer to their goods as "Movil". Should I buy this tool? Definitely yes. It is important to know what the effectiveness and quality of one or another means. Do not save and acquire the cheapest option.

"Movil 2m"

This is a product of domestic production. The company is located in Moscow. The drug comes in the canister. After processing on the surface, a thin transparent and fairly uniform film is created. This product is well withstanding the Russian winter. In the case of drops of this composition on the paint, they are easily removed by gasoline. The tool impresses rust and has an average fluidity.

The product displaces well input, but the protective layer is not too durable, which means it is ineffective. Sooner or later, the rust will still manifest. Motorists say it is better not to use - it is a waste of money.

"Movil 1"

This is already "St. Petersburg" formula. The drug is distinguished by resistance to low temperatures, it has a good fluidity, well impresses rust. With Moscow reagents, the drug coped surprisingly qualitatively - this is a reliable choice.

"Movil 2"

Preparation of Lithuanian production. It would seem that it should be the very real Movil. Its use shows that it has a good fluidity, a high level of razavchin impregnation. And in the rest, this is not the best option, but probably even the worst. Tests show that under the influence of salt is enough 150 hours, so that the rust is eaten the entire surface area treated with this Lithuanian.

"Movil" long-haired

This means is better than the "Movil" of the ordinary and any of the funds offered in the market for anti-corrosion protection. In the case of conventional drugs, it is the smell. The consistency of this means is not thick, but not too liquid. On the surface after processing, a solid film is formed.

The manufacturer recommends applying a drug in several layers with a brush. Be sure to have time to dry. The difference between this product from all the others lies in elasticity. It will not fall off even with mechanical impacts.

Movil with Rust Converter

These funds are offered in the form of aerosols and liquids. The product task is not only corrosion protection, but also the transformation of already existing foci. But there is one nuance - in fact, he does not differ in its composition from the usual "Movil".

Such products refer to film-forming inhibited compositions on an oil basis. It is deeply falling into corrosion pores, and the converter transforms corrosion into a certain form of steel, which is not amenable to rust. Additionally, a protective film is formed, which prevents the further oxidation process.

Conclusion

The means for anti-corrosion processing is a very useful solution for your car. This will significantly extend the service life of the body and will support the initial, factory condition of the car.

It is much easier to warn such a problem as the appearance of corrosion than then on the ambulance hand to pull holes with welding. Today, many motorists are used to prevent rust formation such as Movil, who has already managed to establish itself in this matter. But at the same time, not all motorists know how to properly apply such an anti-corrosion composition.

What is Movil

Most auto called Moviem almost any anti-corrosion composition. But what is Movil for cars in the original version? This tool must contain such components:

substances that impede corrosion;
olife;
motor oil.

If the rust remedy has a different composition or has more and additional components, it can no longer be called Movil. The original tool "Movil" was invented not one ten years ago.

In its development, scientific institutes from Moscow and Vilnius participated, as a result, the means and got such a name.

More than half a century, Movil remains one of the most beloved motorists from rust. Such popularity is explained by an acceptable combination of quality and price. Before considering applying funds to the car body, it is necessary to deal with what kinds of Movil today are on sale.

Movil's varieties

It is possible to find Movil three species on sale:

Spray can It features convenience and simplicity of application on the body. Most motorists choose the composition in the aerosol. However, it should be borne in mind that the price for 250 - 300 ml means fluctuates from 450 to 650 rubles (depending on the manufacturer). Therefore, the processing of the entire body will cost Nedlyo. The main disadvantage of the aerosol is that the spraying can be kept vertically in the spraying process all the time.
Movil in a liquid version is the most inexpensive. The price for 3 liters in the canister ranges from 300 to 400 rubles (it all depends on the manufacturer). With this tool, it is fairly easy to process all the internal metal parts of the body. For the convenience of applying liquid Movil, a special spherical nozzle is used, it goes complete with the means.
Movil in the form of pasta It is possible to find in plastic and tin cans. Its price is 200 rubles for 860 gr. To the surface of the body, such a means is applied using a brush. To handle the internal cavities, you need to mix the paste with the solvent.

After the tool is selected, you can proceed to the preparation of the body for its subsequent processing.

Prepare body

More often processing against corrosion is carried out on the bottom of the car. It is this part of the body that is susceptible to the appearance of rust and destruction. Especially often the bottom of the car suffers in regions with high humidity. The lower part of the car suffers from all sorts of mechanical damage. Anticorrosive processing is possible on such body elements:

floor thresholds;
door pockets;
spars;
housings of lanterns;
arches (front and rear);
central racks.

It is necessary to make careful preparation of all listed elements. You can take a special portable car wash for these purposes, into which detergents are added. Such a wash will clean the car not only from dirt, but also from oil sediments.

When thorough cleaning is completed, you need to completely get rid of the remaining moisture. In the summer you can only dry the car under the sunny rays. If the street is cold or damp, then this will require a compressor. Using the purge, you can remove moisture residues on the body surface, and then the solution to the desired elements is unhindered.

After completion of the body cleansing, it is necessary to carefully inspect the entire paint coating of the body. In places where there is a swelling or detachment of the coating, it is necessary to clean up with sandpaper with large grain. Similarly, special stripping will be required in those places where there are corrosion foci.

Without careful preparation, Movil should not be qualitatively.

As soon as the body stripping is fully completed, you need to apply any Movil rust converter. If the Movil is used with the rust converter, then this item can be skipped.

How to apply Movil?

Processing the car with the help of Movil is simple enough. To do this, it is not necessary to go to a hundred. You can completely do the terms of the garage. If the preparation was made correctly, Movil will be applied quite easily, and the protective coating will serve not one year.

For applying anti-corrosion, no expensive equipment is required. It is enough to choose to choose a tool - it depends on what type of coating will be used. To cover the body, the liquid Moviem will need a sprayer. In case of lack of liquid or diluent, you can apply Movil with a brush of a small size. Dilute the composition is simple enough. For these purposes, the well-known "White Spirit" or solvent No. 646 is used.

It is a solvent that helps choose the correct consistency of the anti-corrosion composition. If the solution is too liquid, it will flush from the surface, if it is too thick, it cannot be put on a flat layer or fill it in hard to reach places.

Movil is applied with a smooth thin layer on a pre-prepared surface. But you can only use the car in a few days from the moment the anticorrosive was applied.

What precautions must be observed?

When processing means, the following security measures must be observed:

For the safe operation of the car after processing you need to know how much time Movil dries out. In the middle smell in the cabin, it remains three days after applying. During this time, you should not sit in the car so as not to get serious poisoning.
When applied, consider that Movil gives poisonous pairs. When they are inhaled, it is easy to get poisoning. Therefore, apply the composition is recommended in a well-ventilated room.
When the processing of Movil gets into the eye, on the mucous membrane, on the skin of the hands or face of other parts of the body, it is possible to get a serious burn. It is important to work with this composition only in closed clothing. It is advisable to wear a respirator. So you will protect yourself from inhalation of poisonous vapors. Also use protective gloves for work.
When applied using an aerosol or sprayer, do not forget to wear special safety glasses.