Replacing candles polo sedan
We proceed to replacing candles, according to the regulations, this procedure should be carried out every 60 thousand kilometers of the mileage. First of all, remove plastic decorative protection.
Removed the lid, got to the coils.
We take a screwdriver, take turns soaring the coils and raise them so that they come out of the candles from the candlestones.
The last candle is simply so possible to get it, you need to disconnect the power connector.
We take the sixteenth head of the candle, put it on the key.
Now alternately unscrew the candles.
Take out an old candle from the key, we insert the new and twist.
Having finished with candles, we collect everything back, in particular, set the coils on their places.
We put the engine cover in place. All candles are changed.
VW Polo is a quick ignition replacement.
My channel Subscribe Friends.
Volkswagen Polo Sedan Thu-2 Ignition Candle Replacement.
Detailed description as the most replace candles ignition on Volkswagen Polo Sedan.. According to the service book they ...
On the polo sedan is a gasoline engine 1.6 liters with a capacity of 105 hp To properly function all systems, it is necessary to follow the technical condition of your car. As part of preparation for periodic, the replacement of candles on the Volkswagen Polo sedan is shown.
When you need to change the candles on the polo sedan
According to the instructions for maintenance of this car, the replacement of the candles is carried out after every 60,000 km.
Installation of platinum or iridium spraying candles allow you to extend this service life. Also, on time, the replacement must be required to check the components of the ignition system parts, such as: ignition coils, candle tips and coil fuses.
Checking the candles requires a visual inspection for the presence of soot (a lot can tell the color of Nagara), oil spots and of course, the same gap.
After removing the ignition coils, in order to avoid dust and dirt in the cylinder block, it is necessary to blow with air compressed candle wells.
When checking the candles, if the gap between the electrodes is less or more than 1.0-1.1, then it is necessary to adjust it to the specified values, fading the electrode.
It is recommended, when installing new candles, apply a lubricatory paste g 052141 A2 on the ignition coil. The use of this paste prevents both the candles to the tip of the ignition coil and its threaded part.
Required tools and materials for replacement of candles
Full list What is necessary for work:
- shredded flat;
- special sleep for 16 mm candles;
- dynamometer key;
- candle stripping brush;
- set of spark plugs.
Catalog materials for replacement materials:
Original spark plugs for Volkswagen Polo Sedan: Longlife spark plug from NGK VAG101905617C ART. 101905617C and Bosch VAG101905601F ART. 101905601F at a price of 375 rubles for 1pc.
Their analogue of the production company "DENSO" Ignition Candle "Nickel" Art. KJ20DRM11 - Cost 190 rubles / pcs.; From the company NGK - 5960 worth 200 rubles per piece.
Paste lubricant VAG art. G052141A2 - price 1600 p. For a 20 gram tube, which is enough for you for a long time.
The price of spare parts is relevant for the summer of 2017 for Moscow and the region.
How to Change Candles on Sedan Volkswagen Polo
Spark plugs are an important part of any car. Their quality directly affects the operation of the engine. The service life depends on many parameters, such as high temperatures, fuel quality and various additives.
Often, Volkswagen Polo sedan malfunction is associated with ignition candles. If the engine rushes, occurs power lossThe engine works incorrectly, fuel consumption increases, then, first of all, you need to check their condition. In the end, the negative factor of the defect part is that non-working candle It may cause exhaust gas conversion refusal, as well as increase the coefficient of gasoline emissions and toxic substances into the atmosphere. It is necessary to constantly monitor the technical condition of the candles.
Read the same way
For automotive engines, use candles, such as VAG10190560F or their analogues offered by other manufacturers.
There are two reasons for replacing the ignition candles in Volkswagen Polo:
- Mileage from 30 thousand km. And more (these numbers are listed in the rules of service of vehicles).
- Typical engine malfunctions ("floating" idling, cold engines, etc.).
Surveys of the technical condition should be carried out in a specialized service center. But if the car is bought without warranty and all the necessary tools, replacement and inspection can be performed independently.
First, you need to prepare all the necessary tools:
- Candle wrench for 16-long 220 mm.
- Screwdriver flat.
All work must be performed on a cold engine. Previously, the surface of all parts should be cleaned to prevent garbage from entering the combustion chamber.
Read the same way
VW Polo. Fast spark plug replacement.
My channel Subscribe Friends.
Volkswagen Polo Sedan Thu-2 Ignition Candle Replacement.
Detailed description as the most replace candles Ignition by Volkswagen Polo Sedan.. According to the service book they are.
After all the preparatory work, remove the plastic protective cover from the engine. Its latches are located on both sides to the left and right and open with normal pressure. Under the lid you can see four ignition coils Together with low-voltage wires. To get to the candles, you need to delete all these details.
The coil is usually removed by a special tool, but, as a rule, this device is only in technical services. Therefore, to delete, use a simple flat blade screwdriver. Reset starts from the first coil. To do this, use a sharp end of the screwdriver to slide under the part and carefully lift the entire design up.
After all the coils are diverted from their places, they need to remove the wires from them. On the coil pad there is a clamp, when you press it, you can delete the terminal using wires.
Read the same way
After that, everything ignition coils Can be removed. Check the contact location of the coil and fork. If the connector is oxidized or contaminated, it should be cleaned, because it may be the cause of a fork failure, otherwise it will lead to the rejection of the coil.
Then, with the help of a candle, we alternately turn on the spark plugs. Here, too, you should pay attention to their condition. The billet is considered one, on the surface of which there is no black sludge and various liquids, fuel traces, oil. If such features are detected, a number of measures should be taken to determine the fault. It can be a burned valve, which leads to low compression. Problems can also occur in the cooling system or oil pump.
Installing new candles is made in reverse order. From the recommendation it should be noted that they should be wrapped in manually, not a collar or other auxiliary devices. If part is not flowing. It can be felt and fixed. For this purpose, it is necessary to return the candle, clean its surface and repeat the procedure. For tightening, the moment is 25 N · m. Excessive tightening can damage the inner thread on the cylinder. What will entail serious repairs.
The ignition coil is inserted before clicking the characteristics, then the remaining wires are connected to it. All terminals must be placed strictly in places where they were. If the installation is incorrect, a car ignition failure may occur.
When complying with simple recommendations, the difficulties with the replacement of candles should not arise. This repair is simple and can be performed both in the garage and on the street. Self charger will not only reduce the cost of payment of specialists, but also will save you from problems such as the complex launch of the engine, power loss Audi 80 BortJournal Carburetor and Candles As soon as he took his dinosaur, he refused to go and tremble a terrible way, so I decided to clean the carburetor a little and, sitting at work, the colleague gave me my old candles, after which the dinosor immediately began to work more or less normally Audi 80 1987. Self-repair Comments 19 and ignition, sleep ...
Spark plugs (SZ) are an important part of the engine. The operation of the engine depends on their quality. For life, many factors affect. The article discusses when the replacement of candles on the Volkswagen Polo sedan is performed, detailed instructions are given to replace them with their own hands.
A high voltage is served on the SZ, thanks to which there is a spark between the electrodes, which flames the fuel mixture. The quality of the candles affects the efficiency of the engine work, fuel savings. Therefore, it is necessary to monitor their condition.
Signs of wear SZ.
Replacing the SZ on any car is done for two reasons:
- according to the maintenance regulations;
- with wear, malfunction of the NW, which causes incorrect engine operation.
According to the regulations on the Volkswagen polo vehicles, the SZ replacement should be carried out after 30 thousand mileage kilometers.
But it is necessary to change the candles when the following features appear:
- the car twitches while driving;
- the starter does not work immediately, for starting the engine, several idle speeds are necessary;
- increased fuel consumption;
- motor power drops.
In addition, it is recommended to perform a technical inspection of the car through 15 thousand kilometers. When examined, check the state of the SZ. Candles require replacement if there are cracks on the housing, delaying the insulator with visual inspection. Change better than the entire set of SZ (author of video - autolikbez).
What candles put?
They must have the following parameters:
- spark gap from 1.0 to 1.1 mm;
- thread size M 14 × 1.25;
- kalil number 6-7;
- thread Length 19 mm;
- tightening torque 25 nm.
You can put analogs of other manufacturers:
- NGK - 5960;
- Bosch - 0 242 236 565, 0 242 236 566;
- DENSO - KJ20DR-M11;
- VAG - 101 905 617 C;
- NKG - BKUR6ET-10.
You should buy originals, it will reduce the likelihood of the acquisition of marriage. For example, on products from the company NGK, the original article VW engraved.
Original product from NGK
Instructions for replacing your own hands
The replacement of the SZ on the car can perform any car enthusiast, as this procedure does not require special knowledge and great experience in repair work.
Tools and materials
For work, you need to prepare a set of candles, a candle wrench to "16" and a flat screwdriver.
Before replacing, it is necessary to thoroughly clean all parts from pollution to eliminate garbage from the combustion chamber.
For this, the old vehicle will fit. After the preparatory work, you can proceed.
Replace tools
The process of dismantling and replacing the SZ
To change the SZ on the Volkswagen Polo, you need to perform the following steps:
- First remove the protective plastic cover with the VW marking. To do this, you need to sweep the attachments from the sides, pressing on them.
- Under the lid there are 4 ignition coils with low-voltage wires. They need to be removed to access the SZ. You can remove the coils using a flat screwdriver. The tool is dyed under the coil and movement up the detail is neatly reset.
- When coils are reset, they need to disconnect the wires. To do this, click on the retainer and pull the plug with the wires.
- Removing the coils, you should clean the places of their installation from pollution, oxidation, which may cause the coil failure.
- Next twisted old candles. At the same time, attention should be paid to their condition. If they have traces of oil, fuel, black Nagar, you should find out the reason and eliminate it.
- In place of old products screw a new set. Screw the candles better manually to a characteristic click to feel if the item went wrong. Tightening torque must be 25 nm.
- After installing the candle set, all the wires are connected, and the reverse assembly is performed.
After replacing the SZ, you need to start the machine and check the engine operation.
Turning a sz key
Independent replacement of SZ makes it possible to save on the car service and maintain the technical condition of the car at the proper level.
Timely replacement of candles will extend the service life of the engine.
Question price
There are a large number of firms and types of candles. The most popular classic, as they are available at a price. Platinum and Iridia have a longer service life, but also the price is higher. Below are classic candles of three firms.
Video "Replacement SZ on Volkswagen Polo"
In this video, it is shown how to replace the spark plugs by car Volkswagen Polo (the author of the roller - Shlepanovan).
Replacing candles polo sedan
We proceed to replacing candles, according to the regulations, this procedure should be carried out every 60 thousand kilometers of the mileage. First of all, remove plastic decorative protection.
Removed the lid, got to the coils.
We take a screwdriver, take turns soaring the coils and raise them so that they come out of the candles from the candlestones.
The last candle is simply so possible to get it, you need to disconnect the power connector.
We take the sixteenth head of the candle, put it on the key.
Now alternately unscrew the candles.
Take out an old candle from the key, we insert the new and twist.
Having finished with candles, we collect everything back, in particular, set the coils on their places.
We put the engine cover in place. All candles are changed.
On the polo sedan is a gasoline engine 1.6 liters with a capacity of 105 hp To properly function all systems, it is necessary to follow the technical condition of your car. As part of preparation for periodic, the replacement of candles on the Volkswagen Polo sedan is shown.
When you need to change the candles on the polo sedan
According to the maintenance instructions for this car, the replacement of the candles is carried out after each 60000 km.
Installation of platinum or iridium spraying candles allow you to extend this service life. Also, on time, the replacement must be required to check the components of the ignition system parts, such as: ignition coils, candle tips and coil fuses.
Checking the candles requires a visual inspection for the presence of soot (a lot can tell the color of Nagara), oil spots and of course, the same gap.
After removing the ignition coils, in order to avoid dust and dirt in the cylinder block, it is necessary to blow with air compressed candle wells.
When checking the candles, if the gap between the electrodes is less or more than 1.0-1.1, then it is necessary to adjust it to the specified values, fading the electrode.
Required tools and materials for replacement of candles
Full list What is necessary for work:
- shredded flat;
- special sleep for 16 mm candles;
- dynamometer key;
- candle stripping brush;
- set of spark plugs.
Catalog materials for replacement materials:
Their analogue of the production company "DENSO" Ignition Candle "Nickel" Art. KJ20DRM11 - Cost 190 rubles / pcs.; From the company NGK - 5960 worth 200 rubles per piece.
Paste lubricant VAG art. G052141A2 - price 1600 p. For a 20 gram tube, which is enough for you for a long time.
The price of spare parts is relevant for the summer of 2017 for Moscow and the region.
Volkswagen Polo Sedan 1.6 CFNA OLD School\u003e Logbook\u003e Replacing the NGK BKR6E V-LINE Ignition Candles 1.1 mm.
To distinguish a fake candle from the present as follows:
- price. Too low price should alert.
- quality of printing. In this NGK, the quality of inscriptions and drawings on the packaging is impeccable (from above). Fake (bottom) are noticeable errors (displaced against each other contours of drawings of different colors). As a result of improper assembly of the parties, the inscriptions and drawings may not be in the center of the faces.
- Central electrode. Take a closer look. If it does not have a clear cylindrical shape, crookedly installed, it has small defects - this is a fake.
- side electrode. Look at the candle on the side. In a real candle, the electrode is exactly, the fake is often crooked or has an oblique face.
- The real candle on one of the strings of the hexagon is there is a code that denotes the party. For fake there is no such mark.
- thread. On the present candle, the carving is made by compatible, therefore it has an ideal surface. Fake candles on the edges of the thread are visible small chips.
- Sealing ring. It is impossible to remove it on this candle, you can twist or even remove it on the fake.
- Isolator. A real candle NGK isolator is a smooth (as if covered with icing), a fake can be rough. The fake candle is also often visible longitudinal protrusions remaining on the insulator after its molding due to inaccurate docking of the molds.
- Inscription on the insulator. This candle has smooth and neat.
Volkswagen Polo Sedan Gray League\u003e Logbook\u003e TO-2 Alone. Replacing the ignition candles.
The following in the maintenance of my gray league is to replace the spark plugs. I will try to highlight this process in detail.
What will be needed for replacement.
1. Of course, first of all, candles are needed.
Everything else will be needed only if you decide to change the candles yourself. This is not difficult in general.
2. Candle wrench at 16. I bought in the bazaar for 150 rubles. May be found and cheaper. When buying, it is better to take a candle with you, the key must grasp it tightly, otherwise you will not be able to pull the candle from the well.
3. Hook for pulling out plugs from the set of tools polo sedan and nail.
4. If the candle key has no turn, then there may still be a rod or a thick screwdriver.
5. Well, relatively straight hands., Well, not very much, but still.
First of all, remove the lid with the VW marking.
To do this, rest the two mounts in front.
You can take advantage of the advice of journalists, a bent for a barbecue for a barbecue, or a wonderful mandrel that is used by the servicemen of OD. But this is if the money is not a pity or there is an extra plug 🙂 I didn't have any other, so it is so. By the way, it is unlikely that it turns out to pull out the coil hooking it with a screwdriver, you can break a bunch of plastic around. They hooked the tool and pull up, pulling will have pretty much, the design sits very tight.
It will turn out to be a wonderful pup, the coil will come out a couple of centimeters, but it's not all, you need to remove the block of wires otherwise the coil will not get out, it is rather long. The pads are removed if you press the lock from the bottom of the terminal, it is not too tight, if not removed, then the retainer pressed poorly.
Compare candles, rejoice in the new one. Old candles were Bosch, new NGK Made in Japan. In general, suppliers are changing. Next, we collect in the reverse order. Difficulties should not arise. The only thing to disconnect the block on the extreme coil to the right is to open the plastic retainer on the plastic, which is around the coils. But everything is simple there too.
The process can be a little viewed on the video, it is not too good too well, there was little light for the camera, everything was clearly visible, and so I had to highlight the lantern. But it seems that something can be understood.
Well, all candles are replaced. Who will say as a state?
How to change the candles on the Volkswagen Polo sedan
Spark plugs are an important item of any car. Their quality directly affects the operation of the engine. The service life depends on many parameters, such as high temperatures, fuel quality and various additives.
Often breakdowns "Volkswagen Polo Sedan" are associated with ignition candles. If the engine troit, the power loss appeared, the motor works unclearly, increased fuel consumption, then the first thing is necessary to check their condition. After all, the negative factor of the faulty detail is that the non-working candle can cause the failure of the exhaust gas convexer, as well as increase the gasoline emission coefficient and toxic substances into the atmosphere. Therefore, you need to constantly monitor the technical condition of the candles.
There are two reasons why the ignition candle is needed in the Volkswagen Polo car:
- Mileage from 30 thousand km. And more (these numbers are indicated in the regulations on the maintenance of a car).
- The characteristic malfunctions of the engine operation ("floating" idling, a cold troit motor, etc.).
Surveys of the technical condition should be carried out in a specialized service center. But if the car is purchased without warranty and there are all the necessary tools, then the replacement and inspection can be carried out on your own.
First you need to prepare all the tools that you will need:
- Candle wrench at 16 220 mm long.
- Screwdriver flat.
All work must be carried out on a cold engine. The surface of all parts should be cleaned to prevent garbage from entering the combustion chamber.
After all the preparatory work, you need to remove the plastic protective cover from the engine. Her latches are on both sides on the left and right and open by ordinary pressure. Under the lid, you can see four ignition coils together with low-voltage wires. To get to the candles, you need to remove all these details.
The coil is usually removed by a special tool, but, as a rule, this device only happens in technical services. Therefore, it is used to remove a simple flat screwdriver. Dump start from the first coil. To do this, the sharp end of the screwdriver is applied to the part and the careful movement up the entire design.
After all coils are torn off their places, you need to remove the wires from them. On the spool block there is a retainer, when you click on which you can remove the terminal with wires.
After that, all ignition coils can be removed. You should check the contact of the coil and candles. If the connector is oxidized or contaminated, it should be cleaned, because it may be the cause of the candle, either subsequently lead to the failure of the coil.
Then, the candle wrench turn the ignition candles alternately. It should also pay attention to their condition. The working detail is considered to be on the surface of which there are no black nagar and various liquids, fuel traces, oil. If such signs are detected, then a set of measures should be carried out to identify malfunction. This may be a rotten valve, as a result of low compression. Problems can also be in the cooling system or with an oil pump.
Installing new candles is made in reverse order. From the recommendation it is worth noting that it is necessary to wrap them with hand, not a gorge or other auxiliary fixtures. If the item does not go on a thread - it will be possible to feel and correct. For what should be unscrewed back the candle, clean its surface and repeat the procedure. Tightening need a torque of 25 N · m. Excessive tightening can damage the inner thread on the cylinder. What will entail serious repairs.
The ignition coil is inserted to the characteristic click, then the remaining wires are attached to it. All terminals need to be put strictly on the places they were on. If an incorrect installation may be lit the ignition of the car.
In compliance with simple recommendations, difficulties in replacing candles should not occur. This repair is simple and can be carried out both in the garage and on the street. An independent replacement will not only reduce your experts' work costs, but will save you from such trouble as a difficult engine launch, power loss, as well as high fuel consumption.
Be careful on the roads!
For reading 4 min.
Spark plugs are an important item of any car. Their quality directly affects the operation of the engine. The service life depends on many parameters, such as high temperatures, fuel quality and various additives.
Often breakdowns "Volkswagen Polo Sedan" are associated with ignition candles. If the troit, the power loss appeared, the motor works unclearly, then the first thing is necessary to check their condition. After all, the negative factor of the faulty detail is that the non-working candle can cause the failure of the exhaust gas convexer, as well as increase the gasoline emission coefficient and toxic substances into the atmosphere. Therefore, you need to constantly monitor the technical condition of the candles.
For car motors, candles of type VAG10190560F or their analogues offered by other manufacturers are used.
There are two reasons why the ignition candle is needed in the Volkswagen Polo car:
- Mileage from 30 thousand km. And more (these numbers are indicated in the regulations on the maintenance of a car).
- The characteristic malfunctions of the engine operation ("floating" idling, a cold troit motor, etc.).
Surveys of the technical condition should be carried out in a specialized service center. But if the car is purchased without warranty and there are all the necessary tools, then the replacement and inspection can be carried out on your own.
First you need to prepare all the tools that you will need:
- Candle wrench at 16 220 mm long.
- Screwdriver flat.
All work must be carried out on a cold engine. The surface of all parts should be cleaned to prevent garbage from entering the combustion chamber.
After all the preparatory work, you need to remove the plastic protective cover from the engine. Her latches are on both sides on the left and right and open by ordinary pressure. Under the lid, you can see four ignition coils together with low-voltage wires. To get to the candles, you need to remove all these details.
The coil is usually removed by a special tool, but, as a rule, this device only happens in technical services. Therefore, it is used to remove a simple flat screwdriver. Dump start from the first coil. To do this, the sharp end of the screwdriver is applied to the part and the careful movement up the entire design.
After all coils are torn off their places, you need to remove the wires from them. On the spool block there is a retainer, when you click on which you can remove the terminal with wires.
After that, all ignition coils can be removed. You should check the contact of the coil and candles. If the connector is oxidized or contaminated, it should be cleaned, because it may be the cause of the candle, either subsequently lead to the failure of the coil.
Then, the candle wrench turn the ignition candles alternately. It should also pay attention to their condition. The working detail is considered to be on the surface of which there are no black nagar and various liquids, fuel traces, oil. If such signs are detected, then a set of measures should be carried out to identify malfunction. This may be a rotten valve, as a result of low compression. Problems can also be in the cooling system or with an oil pump.
Installing new candles is made in reverse order. From the recommendation it is worth noting that it is necessary to wrap them with hand, not a gorge or other auxiliary fixtures. If the item does not go on a thread - it will be possible to feel and correct. For what should be unscrewed back the candle, clean its surface and repeat the procedure. Tightening need a torque of 25 N · m. Excessive tightening can damage the inner thread on the cylinder. What will entail serious repairs.
The ignition coil is inserted to the characteristic click, then the remaining wires are attached to it. All terminals need to be put strictly on the places they were on. If an incorrect installation may be lit the ignition of the car.
We proceed to replacing candles, according to the regulations, this procedure should be carried out every 60 thousand kilometers of the mileage. First of all, remove plastic decorative protection.
Removed the lid, got to the coils.
We take a screwdriver, take turns soaring the coils and raise them so that they come out of the candles from the candlestones.
The last candle is simply so possible to get it, you need to disconnect the power connector.
We take the sixteenth head of the candle, put it on the key.
Now alternately unscrew the candles.
Take out an old candle from the key, we insert the new and twist.
Having finished with candles, we collect everything back, in particular, set the coils on their places.
We put the engine cover in place. All candles are changed.
On the polo sedan is a gasoline engine 1.6 liters with a capacity of 105 hp To properly function all systems, it is necessary to follow the technical condition of your car. As part of preparation for periodic, the replacement of candles on the Volkswagen Polo sedan is shown.
When you need to change the candles on the polo sedan
According to the instructions for maintenance of this car, the replacement of the candles is carried out after every 60,000 km.
Installation of platinum or iridium spraying candles allow you to extend this service life. Also, on time, the replacement must be required to check the components of the ignition system parts, such as: ignition coils, candle tips and coil fuses.
Checking the candles requires a visual inspection for the presence of soot (a lot can tell the color of Nagara), oil spots and of course, the same gap.
After removing the ignition coils, in order to avoid dust and dirt in the cylinder block, it is necessary to blow with air compressed candle wells.
When checking the candles, if the gap between the electrodes is less or more than 1.0-1.1, then it is necessary to adjust it to the specified values, fading the electrode.
It is recommended, when installing new candles, apply a lubricatory paste g 052141 A2 on the ignition coil. The use of this paste prevents both the candles to the tip of the ignition coil and its threaded part.
Required tools and materials for replacement of candles
Full list What is necessary for work:
- shredded flat;
- special sleep for 16 mm candles;
- dynamometer key;
- candle stripping brush;
- set of spark plugs.
Catalog materials for replacement materials:
Original spark plugs for Volkswagen Polo Sedan: Longlife spark plug from NGK VAG101905617C ART. 101905617C and Bosch VAG101905601F ART. 101905601F at a price of 375 rubles for 1pc.
Their analogue of the production company "DENSO" Ignition Candle "Nickel" Art. KJ20DRM11 - Cost 190 rubles / pcs.; From the company NGK - 5960 worth 200 rubles per piece.
Paste lubricant VAG art. G052141A2 - price 1600 p. For a 20 gram tube, which is enough for you for a long time.
The price of spare parts is relevant for the summer of 2017 for Moscow and the region.
Watch an interesting video on this topic.
