Due to what can increase engine power. Increase engine power with their own hands

An increase in the car's capacity in the people is called the engine tuning or the process of its forcing. Moreover, tuning happens two types - deep and superficial. This article mainly covers surface changes.

Engine power increase process

How to increase engine power? To the first stage, the process of finalizing its elements in the absence of modification of the engine itself is believed. What can be done? Well, first facilitate the "breathing" of the car. Especially for such work, the world of tuning can offer filters with zero resistance. If you want to answer the question of how to increase engine power, you can do the filter replacement procedure. It is also able to make a "breath" of the car easier, lowered the energy that is spent to succify the air. For the installation process of the zero filter, any cardinal changes will not be required, but the engine will still need to implement a small engine refinement.

Improve the functioning of the power unit

After solving the problem with the "breathing" of the motor, you must still make it easier to function. Solve the question of how to increase engine power will help the exhaust manifold with a special design "Spider". It will allow to ensure the easier passage of exhaust gas. But it is worth understanding that without performing the fulfillment of the entire exhaust system, it will not bring any benefit. Here, first of all, it will be necessary to replace the standard exhaust system on the forward flow. The latter contributes to the engine operation process in the presence of a completely new sound. Perhaps even this sound will be able to bring you the feeling that gives more confidence in psychological plan. And after that you will no longer want to seek the answer to the question of how to increase engine power.

Cardinal changes

The described elements were the main components that are associated with an increase in engine power. Of course, this refinement will be able to give not one dozen horsepower. However, it is worth noting that the process of further modification is fraught with rapid wear of the engine or in general its breakdown. Under this implies a cardinal process of changing its characteristics. It may be the presence of a chip tuning. Or rather the electronic unit equipped with an updated firmware. It is responsible for the fuel supply procedure at which cylinders take a much greater amount. The main effect of such improved engine is the process of increasing the capacity from five to twenty five percent. In addition, the torque will also be increased by approximately ten or fifteen percent.

Conclusion

Now you know how to increase the power of the car. We hope that this review will help you in solving the tasks assigned, and you will achieve the desired result. It is only worth understanding that the cardinal changes can lead to a serious breakage of the car. Therefore, it is necessary to accurately implement new details. Good luck in your efforts.

Why the simple driver add power and improve the dynamics of the car. To add confidence when driving, for example, when overtaking, and get comfortable movement, especially in the conditions of the city.

Purpose - adjustment of the gas distribution phase. The method requires simultaneous transition to another gasoline due to an increase in the risk of detonation.

Simple and fast way. However, without software adaptation, the load on the components of the DVS grows. Another minus is an increase in costs.

Installing "Directok".The goal is to reduce the resistance to the exit of the exhaust gases. The engine is quickly spinning. Of the disadvantages, the sound is not like, many do not like. Pay attention to the quality of the forward-point, which put. If it is made wrong, the effect may not be.

The predicted increase of 3-5% by optimizing the movement of exhaust gases. In the perfect embodiment, a fine tuning of the diameter of the installed pipes is required.

Easy forging details are used (Mama, Mahle, etc.). The goal is to reduce mechanical losses during the WF operation. Engine power increase minimum.

The most popular and easy way. At the iron level, no changes are made. Only the software is changed - the firmware of the ECU, which manages the work of modern engines.

Pluses from chip tuning

How is the power chip tuning TLC PRADO 150 with the disconnection of the USR, look at the video from our partner:

How many horses add? Specific figures depend on the model, installed engine, the state of the machine. On average, the increase in capacity is:

for atmospheric motor up to 7-10%;
for gasoline with turbine up to 15%;
for a diesel engine without a turbine up to 19%;
for a diesel engine with a turbine up to 30%.

An example of a metering after chip tuning Ford Focus 2 TDCI 1.8 l. 2011 MCPP (Red line - stock, green line - Adact firmware; graph on the left - torque, graph right - power).

"NG-REFLECT-PROPS \u003d" "\u003e

Top 8 Engine Power Increased Methods

Setting the crankshaft with an increased radius of crank or boring cylinders.The volume of the engine becomes larger, the torque and power increase. Cons: expensive and increased fuel consumption. It takes more carefully to treat the maintenance of the car, since even a small detonation or hydrate can be overhaul. On many modern cars, this method is not applicable, because the walls of cylinders are thin.

Installing a modified camshaft.Purpose - adjustment of the gas distribution phase. The method requires simultaneous transition to another gasoline due to an increase in the risk of detonation.

Filling gasoline with a higher octane number.Simple and fast way. However, without software adaptation, the load on the components of the DVS grows. Another minus is an increase in costs.

Installing the "zero" resistance air filter.Increases the supply of oxygen-air mixture and reduces the resistance to the movement of fuel on the inlet. Due to this, the compression coefficient in the cylinder increases and the power is growing by 1-3%. The increase is small, but the method is cheap.

Installing "Directok".The goal is to reduce the resistance to the exit of the exhaust gases. The engine is quickly spinning. Of the disadvantages, the sound is not like, many do not like. Pay attention to the quality of the forward-point, which put. If it is made wrong, the effect may not be.

Installing a turbine on atmospheric motors.As a result, the level of oxygen in the fuel mixture grows sharply. Increases the power of compression and explosion, and accordingly the power. This is one of the most effective ways giving the greatest increase in atmospheric. However, consider the high cost and technical complexity of the method. Carefully choose specialists who will take for work.

Installation of exhaust pipes with a changed diameter.The predicted increase of 3-5% by optimizing the movement of exhaust gases. In the perfect embodiment, a fine tuning of the diameter of the installed pipes is required.

Installation of light rods or pistons.Easy forging details are used (Mama, Mahle, etc.). The goal is to reduce mechanical losses during the WF operation. Engine power increase minimum.

Chip tuning and power increase

The most popular and easy way. At the iron level, no changes are made. Only the software is changed - the firmware of the ECU, which manages the work of modern engines.

Cons Increase power with chip tuning

It is not recommended to do it yourself;
It is necessary to relate to the quality of fuel attentively;
When moving to E2, CO emissions will grow.

Pluses from chip tuning

There will be an increase in the torque and engine power, especially when the catalyst or the particulate filter is simultaneously disconnecting;
Gas pedal will respond faster compared to the stock firmware;
The turboy on engines with a turbine will disappear;
Improved work on a cold engine, idle and when the air conditioner is turned on;
Does not affect the resource of the engine during civil tuning;
There are no problems with the passage of inspection.

Chip tuning in terms of price increase of power is the most optimal option. Additional benefits: efficiency and the ability to roll back to the stock firmware. The adact is guaranteed a refund within 10 days after chip tuning if the results seem insufficient.

Manufacturers of all mass cars go on compromises. Their motorists pushed them into this framework, although they themselves are not suspected. This situation is simply explained: they are forced to produce competitive, cheap, reliable and economical cars that will buy again and again.

Why increase engine power?

The motive for increasing the output power of the engine for each car owner, starting with a banal desire to stand out from the crowd to the more aggressive sounding of the motor and dynamic acceleration, ending with the increase in the engine and improve its practical qualities. Increase the power of the engine of the serial vehicle in different ways:

chip tuning;

an increase in the working volume;

an increase in the coefficient of fuel compression;

reduction weight;

replacement of the heads of the cylinder and camshafts;

modernization of the intake system.

upgrading the exhaust system;

A brief overview of the power boost methods

In addition, the chip tuning is one of the most effective, it is also one of the most simple in terms of direct technical method of interference in the engine. The essence of the method is reduced to installing a new program in the engine control unit.

With the working volume, everything is simple: the more fuel engine is able to burn in one crankshaft turnover, the greater the power it produces. The working volume of the engine increases the reservation of cylinders.

By increasing the compression ratio to a specific plank, you can potentially develop more power at constant fuel consumption. That is why all powerful racing cars operate on high-octane gasoline - their engines compress the fuel mixture to the maximum and get the limit return.

Replacing heavy motor pistons to lighter, it is possible to reduce the waste of energy to change the direction of movement of the pistons and to stop them. The easier the piston, the less energy is wasted.

Many factory engines provide one intake and one exhaust valve for each cylinder. By installing the block head with an increased number of valves per cylinders, you can significantly increase the air flow in the combustion chamber and increase power.

The more air to drive into the cylinder, the more power it will give the crankshaft in one turn. For this, the engines are equipped with special turbines and compressors that injected air into pressure cylinders.

If the exhaust gases go well from the combustion chambers and the exhaust system as a whole, they steal the engine power. The smaller the cross section of the exhaust pipes, the stronger the reverse pressure and the lower the power of the FRO.

Hello, dear visitors and blog readers. In the article we will tell how to perform an increase in the engine capacity of the car with your own hands, without resorting to the help of professionals. Motor machine exciting process.

Allows you to find out the device of the power plant and improve the characteristics. Often the motor power does not suit the owner. The car enthusiast is trying without helping to "squeeze" maximum due to the competent optimization and use of special equipment.

It should be remembered that it is not necessary to engage in amateur. You can damage individual nodes or engine elements. Compliance with the technology of increasing engine power will provide a positive result.

Experiments can detain the engine. All described actions in the article are advisory. The driver accepts the obligations related to the possible disruption of the engine operation during erroneous actions. It is necessary to be attentive and neat in the process of increasing the engine power with your own hands.

At the end of the article, you can find a video that allows you to better deal with such a question as an increase in engine power with your own hands.

Car engine power - the value obtained during the multiplication of the motor turns to the rotational moment. Power is constant for a particular car. To increase power it is necessary to increase turns. In fact, not everything just as it may seem, at first glance.

There is a mechanism for changing the gas distribution phase. Plays the role of the regulator in the power supply system and is a stumbling block towards an increase in engine power.

The main task of the gas distribution mechanism in the motor-to ensure uniform filling of the cylinders with fuel and air mixture. The gas distribution mechanism, depending on the range of engine operation, shows various results.

Low revolutions do not contribute to the complete filling of the motor cylinders. The power set is slow and sluggish. For full-fledged camera filling, motor turns should approach 3000 thousand. Abuse of a sharp set of speed and the growth of revolutions at the start is fraught with fast clutch wear.

Manufacturers of power plants learned to overcome the limitations associated with the gas distribution mechanism. The electronic system regulates in automatic mode of phase change conditions depending on the driving style. Allows you to ensure efficient filling of cylinder chambers with fuel-air mixture without a threat of clutch breakage.

Most of the cars, one-road crossing on the roads, cannot be attributed to new. Almost 80% of the car park is represented by second-hand machines with different levels of run.

The prevailing motors are not equipped with a complex electronic regulating system. Ineffectively use the fuel and air mixture. Machines can and need to be upgraded to increase the power of the motor.

Increase the power of the car engine with your own hands

An increase in engine power refers to a type of tuning. Externally, immeasured for the human eye, but significantly improves the dynamics and high-quality component of the car.

Select 6 power increase methods:

1. Installing a wide-apparatus camshaft instead of a standard mechanism.

Comfortable and budget option to increase power with your own hands. In assistants take an intelligent motorist. Without the use of special equipment, you can cope.

Installation of an improved camshaft allows you to maximize the filling of cylinder chambers at high revs. Excellent value of costs and results obtained.

2. Dimension to friction.

Reducing mechanical losses with a decrease in friction force makes it possible to achieve a positive dynamics of power increase. The emphasis is on reducing the friction force of the pistons about the walls of the cylinders.

There are several ways:

reducing the thickness of the piston rings;
reduction of the piston skirt;
making changes to the mounting rod to the piston, due to the displacement of it in the Piston Bars.

3. Low weight of the piston group.

To enhance the power of the motor replace the standard elements of the engine for lightweight options. The efficiency of the method by specialists is questioned. Today it has not been proven that the change in the weight of the piston group increases the power of the motor.

4. Cylinders.

Effective but costly method. Increases engine power. Cylinder boring increases them. It turns out a good imagination to standard power. Among the minuses allocate the increased "appetite" of the machine expressed in magnification. The cost of using the machine is increasing.

Many manufacturers of motors when creating laid power reserve. In the normal state, it is not used. Designed to maintain stable. Restricted power due to electronic blocking.

Software, straight hands and laptops are able to unlock the hidden reserves of the motor. You can achieve power growth. Among the disadvantages of the engine tuning method, there is a decrease in the resource of operation.

The idea of \u200b\u200bcreating a powerful engine is attractive for many car owners. Strong motor allows you to quickly dial the speed and join the shared stream. At any time, if necessary, it is easy to make a dynamic manewer and leave behind a more expensive foreign car. Such moments give a lot of no comparable sensations.

Engine tuning helps to achieve significant growth in the dynamics of the car. If competently approach this task, it will turn out to reveal the entire potential of the motor. This article will see how to increase the power of the diesel engine. The methods described help to improve the power unit and achieve a real result. But before proceeding with tuning, learn the principles of diesel engines.

How the diesel engine works

Fuel mixture. A feature of the diesel engine is the method of formation and ignition of the mixture. First, the cylinder enters the air, and then the piston compresses it. At a certain point, fuel is served via the nozzle. From the high temperature of compressed air, it flammives in the cylinder.

Supply system. This is the main link in the diesel engine, which provides the supply of the required portion of fuel into the combustion chamber at a precise point and with the right pressure. The power system is two types: mechanical and electronic.

The mechanical was equipped with old engine samples. A feature of this system is an TNVD, injection fuel to nozzles. Injection power depends on the rotation frequency of the crankshaft. Some of the described tuning methods are not suitable for such engines.

Modern cars are equipped with an electronic power system. The fuel using the TNLD is injected into the ramp, and then injected by electromagnetic nozzles. Dosage, pressure and injection moment controls the electronic control unit. By changing it, you can easily improve the engine dynamics. It is such engines that are suitable for tuning.

Increased power depends on the quality of the combustion of the mixture. High pressure and adjusted injection helps fuel to completely burn and allocate maximum energy. Due to the balance between the amount of air and fuel, it turns out to significantly increase the power characteristics of the motor.

Diesel engines tunnel holders have several ways to improve the speakers: chip tuning, installation of power increase module, turbocharging.

Chip tuning
The easiest way to increase engine power. This method is to change the settings of the ECU. Such a procedure should be carried out by a specialist who has the necessary technical tool and special software.

How is the increase in speakers? The electronic fuel supply system is controlled by the ECU. This unit contains a microprocessor in itself, which controls the volume of air, injection, crankshaft turnover. ECU interacts with various sensors, receiving information about the state of the engine. Given the data, changes the mode of operation of the power unit. Refracting the control unit helps to improve the dynamics.

Advantages:

fuel consumption reduces;
the dynamics of the motor increases;
maximum speed limit is removed;
disappears failure in the work of the engine after pressing the gas pedal.

Disadvantages:

changing settings leads to a warranty loss if the car is new;
the process of flashing the ECU is associated with risk - the consequences are not reversible.

Power increase modules
Are popular means of increasing the power characteristics of the diesel engine. These are special modules that interact with the fuel power system. They do not interfere with the work of the ECU, and in parallel with it they control various electronic sensors. Installation procedure simple Just follow the nested instructions.

There are four types of modules

Module for changing the injector control pulses. Controls the activity of the nozzles - slows down or delays the needle raising. As a result, the ignition advance is changing, the efficiency of fuel combustion increases, consumption is reduced. The module is connected to the nozzles wires. Suitable for any diesel engines that have a modern fuel system.
Module for changing the mode of operation of the TNVD. Interacts with fuel pressure sensor. Gets information from it and understed. As a result, the pressure increases in the pump. This allows you to increase the engine dynamics without prejudice to the resource. The module is connected to the Wires of the TNLD and the ECU. Suitable for diesel engines with a mechanical fuel supply system issued until 2008
Module for changing the testimony of the fuel ramp pressure sensor. Decates the ECU, telling him about lowering the pressure in the fuel ramp. As a result, the control unit thinks that the engine dynamics fell and decides to change the intensity of the injectors. This reduces consumption, and increases power. The module is connected to the ramp pressure sensor wires. Suitable for motors having a modern fuel supply system.
Module for optimizing the operating modes of the central processor of the ECU. Determines the pressure of the fuel system. If it increases, sends a signal to the ECU to increase the timing of the nozzles. The built-in program adjusts the engine without the help of the ECU. Does not underestimating sensors. The module is embedded in high pressure system. Suitable for all modern diesel engines.

Advantages of modules:

increase engine power;
reduce fuel consumption;
installed quickly and easily.

Disadvantages of modules:

reduce the resource of the cylinder block;
reduce the service life of the TNVD and the nozzles;
enhance the emission of harmful substances.

Turbine, significantly increases the engine power. It injected a lot of air into the cylinder, and the electronic system increases the amount of fuel supplied. The flow of exhaust exhaust gases spins a turbine with low engine speeds. Thanks to this, turbo lags disappear. Motor thrust increases from the bottom.

Diesel engines have a feature - no choke. Therefore, the air is rapidly injected into the cylinders, the demonstration of complex turbine control systems. In order not to overheat the engine put an intercooler. This device cools the air injected into the cylinder.

Advantages:

fuel mixture efficiently combines;
much significantly increases the power of the engine.

Disadvantages:

a short service life;
increased fuel consumption;
high cost of high-quality turbine;
mandatory use of expensive oil and high-octane fuel.

The described methods of increasing the power of the diesel engine will help make a car quick. The easiest way is to install additional modules. But remember that increasing engine dynamics, reduce its resource. In addition, fast ride will require additional costs. You will have to spend money on the installation of reliable brakes. Before tuning the engine, first think well if you really need this power.