We offer professional airbrushing on motorcycles. Aerography can be performed both as a whole and for any detail of the motorcycle: on the tank, the front or rear wing of the motorcycle, a coffee shop, a fairing, a glove compartment, etc.
The most demanded for airbrushing Detail of a motorcycle is a tank. It is located in a prominent place, and is sufficient for a good picture size. The tank is most often painted with fire, smoke, lightning.
The design of a sports-style motorcycle is popular with popularity, as well as the "Biker" topics. For the latter, the aggressive design of the motorcycle in black colors, using skulls, flame languages, stamped pastes of fantastic monsters, etc. Motorcycles that have pronounced individuality are considered the most respected among bikers. Airbrushing as it is impossible to be suitable for this kind of expression.
Created by individual sketches Aerography on motorcycles looks original and fresh. Therefore, it is worth thoroughly thinking the themes and the idea of \u200b\u200bthe picture, because the image that you will apply to the surface of your "chopper" will broadcast the state of your inner world around others. A qualitatively applied pattern, especially, on complex surfaces, it looks not just beautiful, and fascinating.
In the absence of your own ideas, you can contact us, we will definitely select a suitable drawing for your handsome.
Contact us, and we will turn the complex forms of motorcycle technology into a real work of art!
Our work
The usual painting of the motorcycle, however,, like any other surfaces, has a number of features, a little complicates the process when you want not to simply apply the paint of the same color, but create a drawing or ornament. Most often for these manipulations, artistic skills are required, but the painting of the motorcycle is possible and without them. To do this, you will use only infirm materials.
Materials
- Paint removal fluid;
- motorcycle benzobac;
- the paint of several colors in the cans;
- lace;
- insulating tape;
- primer;
- small grade sandpaper.
Step 1. First you need to completely remove the old coating. To make it it was easier, use a special paint removal fluid. In hand, be sure to put the protective gloves.
Step 2.. If there are irregularities on the surface of the gas tank, they are better to eliminate them at this stage and align the surface completely.
Step 3.. Cover the gas tank primer. Primerovka apply two layers. After its complete drying, treat the surface of the gas tank of fine-grained emery paper. The surface, as a result, should be smooth.
Step 4.. Since in this project it was decided to contrastly paint different parts of the gas tank, he was zonally divided. Instead of the tape you can use the greasy tape.
Step 5.. The side parts of the gas tank were painted in black, after drying the paint, the upper part was painted with silver paint. After the base layers are completely dried, you can proceed to further work.
Step 6.. Now the layers must be addressed. For this, the benzobac was covered with a piece of lace fabric. So that it does not slide, tighten the gas tank tightly and secure the ends of the fabric with painting tape or sewing pins. From above is also zonal, but in the mirror reflection, you paint it.
Motorcycle can be called an attractive vehicle that is always striking. Many decide to make their motorcycle more attractive, for which a drawing is applied to the surface of some elements. - A fairly common method of tuning, which has a fairly large number of features.
How can I characterize popular airbrushing?
The plot of the applied pattern may depend on the type of motorcycle and the preferences of its owner. For example, let's call the following information:
- More often than other airbrushing on choppers. These motorcycles have an aggressive style. On the surface of the tank or wings, the gloomy drawings are often applied: skulls, monsters, flame languages, and so on. To make a motorcycle look at even more gloomy, dark shades are used.
- Sportbikes are also quite often subjected to tuning by applying a picture. Often, images of dragons and various hieroglyphs are chosen as a pattern. A similar choice can be associated with the fact that most sports motorcycles are a proposal of Japanese manufacturers.
- Popular images are considered to be a dragon and flame image. They are suitable due to the fact that they symbolize the speed and power.
- For tanks, the flowing surrounding images are chosen, as well as portraits of various characters.
In general, we can say that there is just a huge number of drawings that are applied to the surface. It all depends on the preferences of the motorcycle owner.
Common ideas for moto-airography
When using common images, make your motorcycle truly unique practically possible. This is due to the fact that many are caught with dragons or skulls.
Box: Important:Art tuning is not imitated, but in achieving individuality.
That is why it should be considered the possibility of developing unique images that will be the basis for airbrushing.
To the peculiarities of choosing a suitable image to apply to the surface of a motorcycle, the following points can be attributed:
- If you look for sketches that are suitable for airbrushing, then come across in the main skull and dragons, as well as abstractions.
- If you need an individual drawing, you can pay attention to the catalog of the tattoo. Perhaps it is in it that the image will fall, which is suitable for applying to a motorcycle.
- You can ask the artist, which image is suitable for more. Creative people can develop a unique image that will be used in airbrushing.
- Recently, with airbrushing, many specialists seek to achieve a 3D effect. Due to the combination of colors, you can achieve a three-dimensional effect. It should be borne in mind that a similar effect can manifest itself at a certain distance.
- Patriotism is very popular. Many experts have recently been applied to the surface of the image with state and national attributes. However, the choice should be careful, as there may be serious problems with the sale of a motorcycle.
- The choice of pattern is carried out taking into account the features of the shape and size of the installed tank. Therefore, when considering drawings, consult with a specialist who will draw an image.
- Modern technologies are also applicable in the subject matter. Modern designer studios use three-dimensional programs that allow you to understand how the image on the surface will look. Alone to fulfill this kind of work is practically not possible.
- Recently, factory stickers that are sufficient to surface are fairly popular. It should be borne in mind that there are quite a large number of shortcomings in such stickers: after applying the factory vinyl, it will not be possible to remove it without damage to the surface.
Of course, the easiest way to contact the professional studio, which will create and apply an image.
The cost of the finished image
The cost of the services under consideration may vary in a sufficiently large range and depend on the following points:
- The complexity of the image. In order to achieve a complex three-dimensional effect, a large amount of time is required, due to which the cost of services is significantly increasing. Aerography and abstraction costs cheaper.
- The dimensions of the figure also determine the cost of services. The more applied drawing, the longer the wizard goes to perform work. In addition, you should not forget about increasing paint costs and other consumables.
- The type of applied image also determines the cost of the service. This is due to the fact that some images have already been made stencils, for others we will have to make it yourself.
- Depends on the qualification of the wizard and its popularity. Famous masters are popular, which determines the reduction of their time to work.
Considering the cost of such a service, we note that you should trust the work of exclusively highly qualified professionals, since the usual images will look less attractive and will not decorate the motorcycle.
Airbrush on a motorcycle do it yourself
Many bikers dealt with airbrushing. Cutting images can be carried out using a spray can with paint or special. It is best to start training on an ordinary metal surface, and not a road motorcycle.
In the presence of art talent, the following will be required:
- Airbrush with a compressor. This kind of device is intended for spraying paint over the surface. Without it, it is not possible to do uniform paint.
- Immediately. For metal surface, automobile and special paints, varnish and acrylic or nitrocracy are suitable. It is worth using exceptionally high-quality paints that allow you to achieve attractive results.
- When performing the work of this kind, you have to protect some parts of the motorcycle from paint. For this you can use polyethylene.
- In order to wash the airbrush, a solvent is purchased.
- Respirator to protect the respiratory tract from the negative effects of paint. It should be borne in mind that the work should be carried out in the prepared box, which does not penetrate the air. That is why it is important to carry out work in the respirator.
When you find everything you need, you can start work.
conclusions
Aerography is quite difficult performed, it provides for the use of the most different equipment. The cost of the resulting image may vary in a sufficiently large range. In addition, we note that it is almost impossible to get a three-dimensional effect without any experience and special equipment. Therefore, if you need to make a motorcycle truly attractive, then you need to contact a specialist who can apply so complex images to the surface of the metal.
Today, the motorcycle is a little less demanded by the means of movement, unlike the car. But this is a completely special vehicle. Those people who go on it, pay a lot of time "Iron Kony". Among the sophisticated amateurs, aerography on motorcycles is particularly popular.
Modern tuning
Each motorcyclist tries to decorate their means of movement in dignity. And it can be understood. After all, the motorcycle reflects a person as a person, as well as his views. Airbrush on motorcycles helps to realize the dream to reality. It is beautiful and also available. Airbrushing is called painting technique, which involves the use of a special means, which is called an airbrush (compressor and paintopult). It is most often used to paint surfaces that are not characteristic of generally accepted use in the art of painting. That is, for example, it is applied on the walls of houses, on laptops, on metal, stone, plastic, etc. It is worth noting that this technique can be said, the only way to decorate its vehicle. It is the airbrush on the motorcycles withstand all the "side effects", which the road is replete - flying stones, dirt, dust, bumps, speed.
Opinion experts
It is worth noting that on the motorcycle to perform tuning of this kind of harder than by car. After all, there is less surface, besides a complex relief. Specialists in airbrushing noted that successfully decorated motorcycles are small. It happens that this technique transforms the vehicle for the worse, and not to the best. More experts say that with the help of computer 3D programs, it is unrealistic to estimate, as the actual airbrush will look at the motorcycle. But many owners are solved on such technology. Only with a personal conversation with a professional artist and attacking of sketches can be represented as it will look as a result of airbrushing on motorcycles. Sketches, by the way, should also perform specialists, because only they can take into account all the nuances of this procedure.
Popularity
It is worth noting that airbrushing on the motorcycle tank is the most popular - there is a weighty cause. The fact is that the tank is the largest surface that is constantly in sight. Pictures that are most popular - fantasy, as a rule. These are flutters, fire, splashes, sparkling lines, the most incredible curved on the tank. Another style called "biomechanics" is still in demand. This is an image of various monsters, often found in Hollywood films. It is often used in painting and here it should be borne in mind that it looks most impressive on Japanese models.
Technology
Such a process as airbrushing on motorcycles is performed using a special device specifically designed for this. This is an airbrush and a compressor that serves air to the device. Thus, paint splashes. By choosing the desired version of the drawing, you should prepare a motorcycle to apply the painting itself. In the event that the aerography will be performed on the tank, it will have to be removed from the motorcycle - it is uncomfortable to paint on the unit itself. It is first cleaned, after which it is treated with an abrasive for removing the varnish layer. It is very important that the surface is matte. After that, it is placed on the sketch. Then the photos make stencils, and their quantity should be equal to how much paint layers will be applied. Well, then already - the case of professionals. It is best to contact the specialists, since a person who has no experience in this business may not decorate his motorcycle, but spoil it.
The usual painting of the motorcycle has a number of features, however, it concerns staining any surfaces. For example, if you wish to create some image on the surface, the process becomes complicated. After all, for such manipulations, artistic skills will be required, although you can paint a motorcycle without them. Here you will need only the necessary materials. What exactly read below.
We will need:
- gas tank motorcycle;
- paint of several colors;
- paint removal fluid;
- lace, varnish, tape, primer;
- Emery fine-grained paper.
Step 1
First, completely remove the old coating from your gas tank of the motorcycle. The author for this took advantage of a special paint removal fluid. Be sure to work with such a means in protective gloves!
Step 2.
If you have a gas tank with a non-ideal surface, then at the same stage eliminate all irregularities, align the surface of the tank.
Step 3.
Now the author covers the benzobach to the primer, he puts it into two layers. After that, wait until the primer is dry, then treat the surface of fine-grained emery paper. As a result, the surface of the tank will be pretty smooth.
Step 4.
The benzobak must be painted beautifully, so it should be divided into zones using a tape or ordinary painting tape - in general, which will be at the moment at the moment.
Step 5.
Color the side parts into black, wait for the paint drying. Then paint the top of the silver paint. Of course, you can choose the paint of another color and paint the tank in any sequence, not necessarily at this point to follow the author's strict advice. Now the base layer of paint must be completely dry, leave a gas tank for at least a few hours.
Step 6.
Now the layers give the texture. Candle for this motorcycle tank with a piece of lace, tighten hard, otherwise the fabric will slide. Fix the ends of the lace tissue with sewing pins or scotch. From above, zones are painted tank, just kill in a mirror reflection.
After painting, carefully remove the lace and do not touch the gas tank before the end of drying paint!
Step 7.
That's almost all, the airbrushing of the motorcycle tank is practically over. To secure a beautiful result, cover the pot of varnish.
