Motor oil is one of the most important liquids in the car. Its quality, properties and functionality directly affect the operation of the Toyota power unit.
In order for the mechanism to work smoothly, it is necessary to comply with the manufacturer's instruction and in a clearly defined period to change the oil and oil filter.

When is the oil change?

The regulation of oil replacement in Toyota Auris is 10,000 -12,000 km of run. Every 12 months should be lubricating liquid and pour a new one. This will ensure optimal operation of the engine and will help to prevent a number of faults.

However, in addition to clear terms, it is worth paying attention to other signs of replacement:

• the engine is buzzing, knocking, creaks and makes noise;
• reduced power and thrust;
• when you first start the motor stalls or reacts poorly to actions;
• the instrument panel knocks the error.

Every 6 months requires checking oil. If the car is operated in hard conditions, in a dusty environment and lack of roads, then only checking the lubricant can show the state and the level of it in the engine. In such cases, the replacement of lubrication occurs earlier - every 5-7 thousand km of run.

What oil to fill?

If we consider mineral and synthetic lubricants for Toyota, then synthetic is suitable here with a viscosity of 5W-30. Available analogues: Castrol, Mobil, Liqui Moly, Synthoil, Motul.

Number of oil required:

• 1.4 liter 1ND-TV engine - 4.3 liters of lubrication;
• 1.6 l 1ZR-FE - 4.2 liters;
• 2.0 l 1ad-FTV - 6.3 l.

Toyota Auris Engine Replacement Stages

To work on updating engine oil, an overpack or pit is required to place a car to height and access the pallet.

Preparation for work includes selection of working tools, learning safety and selection of lubrication fluid.

It is important to understand that the grease from the engine merges hot, and therefore it is necessary to think about its protection. It is better to work in overalls or a bathrobe, rubber gloves and a headdress so that the hot drain does not get on the skin and did not form burns.

Required tools:

• keys at 15 and 17;
• packaging under exhaust liquid;
• new filter;
• canister of new oil;
• rag;
• clean tissue napkins;
• funnel.

How to drain the oil?

Replacing the oil in the engine Toyota Auris takes place in several stages:

• Warming up motor lubrication to operating temperature.
• Move the engine.
• Unscrew the drain plug and substitute the 5 liter container.
• Wait 5-10 minutes while fully strokes the waste fluid.

Sequence of actions when installing a new filter:

• using the puller to unscrew the filtering;
• clean the winding seat with a rag;
• insert a new element.

How to clean the engine?

After the filter is checked and installing a new element, many motorists and masters are recommended to clean the engine. This is necessary in order to remove the remains of the old lubricant and wash off the nap from the surface of the node details.

Step-by-step manoff instruction:

• Split a drain hole.
• The flushing mixture is poured through the necklace cork neck.
• The engine must be started and allowed to work at idle for 5 minutes.
• Mock the unit and through the drain hole drain the flushing.

Many are not supporters of the engine washing, justifying it by the fact that the mixture in large quantities remains in the nodes and engine valves. Before pouring a new lubricant, it will be necessary to wash the flushing fluid mineral oil.

How to pour new oil?

To perform the fill of the new lubricant, you must follow the following procedures:

• Split a drain hole after washing.
• Through the neck slowly pour a new lubricant.
• The volume of lubricating fluid in Toyota Auris is 4-4.5 liters (for gasoline engines).
• After the whole product is wateed, it is required to warm up the engine.
• After 5 minutes you need to drown out the machine and check the level and pressure of the oil.
• If necessary, add lubricant material.

On this, the replacement of oil in the engine Toyota Auris is completed with their own hands.

Replacement frequency

Factors affecting the frequency of replacement of lubricating fluid:

• intensive driving of the car;
• the duration of the use of old lubricant;
• riding on wildflower, soil, sandy roads and mountainous areas;
• significantly exceeded mileage;
• engine technical condition;
• seasonality;
• poor-quality grease.

In a timely manner, pouring new engine oil, you can avoid the occurrence of a number of malfunctions and the overhaul of the Toyota engine.

Before replacing the oil filter, it must be purchased. This can be done if you have a manual for your car. If it is not, then you need to know the engine brand. Let's say for the motors of 1.3 L, 2008-2013 model 1NRFE - filters are suitable with the following geometric data: height - 56 mm, inner diameter - 28 mm, outer diameter - 60 mm.

For motors 1.4 liters 2006-2013 1NDTV filter height - 104.5 mm, outer diameter - 78 mm, connecting thread - UNF 3 / 4-16, and for the engine model 4zzfe 2006-2009, respectively, 71 and 65.5 mm. These filters will fit and for 1ZRFE 2006-2009.

For 1.8 L 2ZRFXE Engines 2010-2013 The height of the filter is 58 mm, the inner diameter is 26 mm, the outer diameter is 60 mm.

For diesel engines 2.0 and 2.2 liters 1Adftv and 2AdFHV models, the geometric dimensions will be: height - 82 mm, the inner diameter is 28 mm, the outer diameter is 70 mm.

Choose a special key (puller) on the outer diameter of the filter housing. The photo indicates d.

We will proceed to replace the oil and filter. It is best to put a car over the repair pit, you can put on a jack with compulsory reliable supports and clamps. Drain of oils, after warming up the engine to the operating temperature, the viscosity of the oil is reduced, and it merges almost completely. If you make the oil change of one brand, then the engine is not worth doing.

We substitute the cubization to collect workshop, turn the cork (you can insure it on the rope). Remember, the oil is hot, work carefully. After the corkscrew, check the integrity of the washer and seal. This item is important, better to put a new puck. In the photo by arroders there are cork and filter housing. Watch the plug into place.

Using the puller, relax the connection of the filter housing with the socket. Turn off the filter. Clean the pure winding jack for the filter. There should be no dirt and small abrasive particles. The nest is indicated by the arrow.

We put the filter into place before installing the o-ring with oil, wrap the filter manually and slightly clamp the key.

We proceed to replacing the oil.

Original Toyota SN / GF-5 0W20 oil is synthetic. Sold in metal banks. Volume - 1 liter. Recommended by the manufacturer's manufacturer. Possible replacement on SAE 5W-30. The amount of oil poured must match the engine volume. You can focus on the volume of fusion oil. The oil level by the tags of the probe must be slightly below the MAX marks. On average for 1.6 and 1.8 liter engines it is necessary about 4 liters of oil.

Also watch the video on self-replacement of oil and oil filter on Toyota Auris:

Toyota 1ZR-Fe / FAE 1.6 l engine.

Engine Characteristics Toyota 1ZR

Production	Toyota Motor Manufacturing West Virginia Shimoyama Plant.
Engine brand	Toyota 1Zr.
Years of release	2007
Cylinder block material	aluminum
Supply system	injector
A type	in line
Number of cylinders	4
Valves on cylinder	4
Piston stroke, mm	78.5
Cylinder diameter, mm	80.5
Compression ratio	10.2 10.7
Engine volume, ccmm	1598
Engine Power, L.S. / Ob. Min	126/6000 134/6400
Torque, Nm / Ob.min	157/5200 160/4400
Fuel	95
Environmental norms	Euro 5.
Engine weight, kg	—
Fuel consumption, l / 100 km (for Corolla E140) - city - Rouss - Mixed.	8.9 5.8 6.9
Oil consumption, gr. / 1000 km	up to 1000.
Engine oil	0W-20 5W-20 5W-30. 10W-30
How much engine oil	4.7
Replacing the oil is carried out, km	10000 (better than 5000)
Engine operating temperature, hail.	—
Engine resource, thousand km - According to the plant - on practice	N.D. 250-300
Tuning - Potential - without loss of resource	200+ n.D.
The engine was installed	Toyota Auris. Toyota Verso. Lotus Elise.

Motor malfunction and repair 1ZR-FE / FAE

These motors were represented by the public in 2007 and were considered as the successor of the unsuccessful ZZ series. The family consisted of 1.6 liter 1Zr, 1.8 liters. , 2.0 l. , as well as the Chinese 4ZR, a working volume of 1.6 liters. and 5zr 1.8 l. Consider the youngest representative of the main model range - 1ZR, this engine was called upon to replace the motor. In the new 1zr, to reduce loads on the sleeve, the axis of cylinders does not intersect with the crankshaft axis, DUAL VVT-I began to be applied, simply speaking, the system of changing the phases of gas distribution on intake and graduation rates, at the same time appeared the Valvematic system that changes the valve lifting (range 0.9 - 10.9 mm), hydrocomathers appeared and now the adjustment of the valves for 1ZR does not threaten you. According to the new tradition of Toyota, the ZR engine is disposable, in an aluminum unit, without repair sizes, with all the resulting.

Motor modifications Toyota 1ZR

1. 1ZR-FE - the main engine, equipped with a double VVTI, compression ratio 10.2, power 124 hp This engine was combined toyota Corolla and Toyota Auris.
2. 1ZR-FAE - analogue 1ZR-FE, but with Dual-VVTI, Valvematic is used, the compression ratio is increased to 10.7, engine power 132 hp

Malfunctions, problems 1zr and their causes

1. High oil consumption. The problem is characteristic of the first models of Zr, solved by the fill with the viscosity of the W30, instead of 0W-20, 5W-20. If the mileage is serious, then measure the compression.
2. 1Zr engine knock. Noise on medium revolutions? Change the timing chain tensioner. In addition, the drive belt of the generator can also make noise (whistle).
3. Problems with idle. Swimming and other troubles are provoked by the sensor of the throttle position and the dirty throttle valve.

In addition, the pump on 1ZR likes to leak, make noise and ask for a landfill after 50-70 thousand km, often dies the thermostat and the engine refuses to warm up to the operating temperature, can jarny VVTI valve with subsequent car stupidity and power loss. Nevertheless, these problems are not solid and nearby, the 1ZR engine turned out to be not bad, with a normal resource (+ \\ - 250 thousand km) and during stable maintenance, the owner does not deliver problems.

Toyota 1ZR-FE / FAE engine tuning

Turbine per 1zr.

The turbine of the engine Zr is described, on the example of 2ZR and successfully repeats on 1Zr / engine.

Any car requires timely maintenance. Most drivers are currently trying to replace the oil in the engine or it is elementary to replace the cooling fluid of the cooling system independently, without resorting to the services of car services. But before carrying out that, and in particular, the replacement of oils and liquids it is necessary to know their number in a particular system or unit. Therefore, a table of filling volumes is presented to help owners of Toyota Auris cars. This information is taken from the instruction manual for this car.

Filling capacity FA Toyota Auris

Place refueling / lubrication	Volume of refueling	Oil / fluid name
Fuel tank (cars with 1NR-Fe motors 1.3 l, 4zz-Fe 1.4 l, 1ZR-FE 1.6 l	55	Neeterized gasoline with octane number not lower than 95
Engine lubrication system (including oil filter) engines:		Oil type SAE 0W-30, 5W-40. Class on ASA: AZ, VZ, B4; API: SL / CF
1NR-FE (1.3 l)	3,4
4zz-Fe (1.4 l)	4,2
1ZR-FE (1.6 l)	4,2
Engine cooling system:		Toyota Super Long Life Antifreeze Coolt or similar
1NR-FE (1.3 l)	5,7
4zz-Fe (1.4 L), 1ZR-FE (1.6 l)	6,0
Mechanical five-speed gearbox	1,9
Mechanical six-speed gearbox	2,3	Oil type: Toyota Synthetic Gear Oil. SAE 75W-90. Class NO API: GL4 / GL5
Automatic transmission	2,9	Toyota WS.
Hydraulic drive of the brake system of cars with 1NR-Fe (1.3 L), 4zz-Fe (1.4 L), 1ZR-FE (1.6 liters)	—	Dot-4 brake fluid
Slotted clutch shutdown bearing	—	Toyota CLUTCH SPLINE GREASE consistency grease or similar
External hinges of equal angular velocities front wheels	91-111 gr.
Internal hinges of equal angular velocity drives of front wheels with automobiles 1NR-Fe (1.3 L), 4zz-Fe (1.4 L), 1ZR-FE (1.6 liters)	125-135 gr.	Special lubricant type SCLS-4, SHRUS-4M or similar

Volume of coolant, oil into the engine, oil transmission oil and automatic transmission Toyota Auris Was Last Modified: May 4, 2018 by Administrator.