Tuning Almers Classic. How is Tuning Nissan Almers Classic

To improve technical qualities, modernization of the car "Nissan Almera" is being modernized. Tuning includes multiple changes in constructive here: replacement of body parts, salon, suspension and engine. This operation is aimed at improving the power and quality characteristics of the car.

Outdoor tuning

The first stage of modernization becomes the alteration of the body of the Nissan Almer car. Outdoor tuning is changes in the design of the machine with the addition of parts that enhance the specifications. So, improves aerodynamic qualities and streamlord of the oncoming air flow.

External tuning "Nissan Almer H16" implies the installation of modified spare parts:

Front and rear bumper.
Trunk lid.
Threshold lining.
Air intakes hood and roofs.
Glass deflectors.
Radiator grille.
Air output grilles on the front wings.

There are many ways to manufacture parts, but fiberglass remains the most common. It keeps the form well, has light weight and sufficient strength, so as not to break at the pressure of the oncoming air flow.

Interior modification

The second stage of improvement becomes the change in the interior of such a vehicle as "Nissan Almera". Salon tuning is the finalization of the inner world of the car, which can carry practical benefit, serve as decoration and express personality. Full interior change is carried out in several stages:

1. Full salon disassembly implies:

Dismantling seats. To do this, you will need a head on 14, which will be disfunned by the ski fastening bolts. It is worth noting that you first need to unscrew the front fasteners, and then rear. If you do vice versa, it will be enough to get enough to the rest.
Remove the instrument panel. 16 mounting screws should be unscrewed, which are hidden in different places under plastic plugs. Before removing it is necessary to dismantle the multimedia system, steering wheel, heater control panel, light controllers, measuring panel and glove box. You will also have to disconnect all the wires that are connected to the instrument panel.
Disassembling lining of racks and ceiling is carried out using a screwdriver. You will need to carefully remove all the plugs and locks, and then remove the items.
After the interior is disassembled, you can remove the carpet.

2. Preparation of parts and installation:

Seat replacement. They can be purchased in specialized stores. The most common trading points from Spark Company, as they have standard mounts and are easy to mounted.
Drawing the instrument panel. First you need to decide which fabric will be pissed to a regular plastic case. Many motorists choose Alcantar or skin. It is easily installed and serves longer than the rest.
Modification of racks and ceiling is carried out with the same material as the instrument panel. At the same time, the color gamma of the material selection is quite wide, and any owner of the car will be able to choose what is like. The pasting is made using a special glue that can be bought where the material is sold, and the rubber spatula, which the surface is spilled and the air is removed.
The floor lies with noisibro-insulation, which is hidden under carpet.

You can also set acoustic speakers in door cards. It is done easily with screws. Installation is made on regular seats. Those who want to stand out are offered ready-made door cards under the cloak of material with convex at the bottom of the round holes under the column.

Software tuning engine

Chip tuning "Nissan Almera" is a firmware of the car on-board computer to increase the power and movement dynamics. To make this operation, you will need a laptop, a PC connection cable and auto, software, firmware of the corresponding version.

The ideal option for the firmware of the motor is the version of the core 28 for the "Nissan Almer". Engine tuning in this case is carried out in such a sequence:

The laptop connects to the car, and the ECU recognition program is launched.
Old firmware is erased completely.
With the help of software, its new version is poured.
Ignition turns on. At the same time, the side PC should show about 20 errors.
Reset settings, and everything works.

On 28 firmware core included features that increase the performance of the car, namely:

Fuel injection is carried out earlier than 0.25 seconds.
The flow of incoming air through the throttle is increased by 17%.
The amount of fuel injected increased by 22%.

Physical tuning engine

In order to increase the engine power at Nissan Almera, the tuning should be done by replacing some parts to improved. At the same time, you will have to install the following spare parts:

Lightweight valve Japan Power 070022.
Pistons and jrw rods, which are easier than standard by 38 grams.
Throttle AWD.
WRR camshaft.

All these spare parts will make it easier for the weight of the engine and increase the power characteristics by adding another 45 horsepower to the car.

Alternative optics

Tuning headlights "Nissan Almera" can even be ordered via the Internet. The main well-known manufacturers for this model are StandFree, Light Fire and SRS-LIGHT. All these companies represent Japan and specialize in tuning headlights of Japanese cars.

Tuning do it yourself

Many motorists make the "Nissan Almer" tuning with their own hands. So, the development, design and manufacture of the following details are carried out:

Outdoor collaps.
Replacing the interior of the car by tapping the parts of the cabin.
Tinted glass.
Painting and aerography.
Installing discs.
Installation of acoustic multimedia systems.

All this motorists can do themselves without contacting the expensive tuning studio. It is much cheaper, but takes enough time and effort.

Creating outdoor tuning parts

Creating modified spare parts requires some experience. The bulk of the details is made of fiberglass. For the "Nissan Almera", tuning does not rush to do with her own hands.

The technological process of the production of outdoor collaps:

As the basis is taken which is measured.
The computer simulates the future item with all measurements and the calculations of aerodynamics and streamlining.
After the drawings are ready, with fiberglass pieces with a hardener, a spare part is made. It should take into account all attachments that will be needed when installed, because if the fiberglass freezes, it will not be possible to fix something.
The item is painted, pre-passing the steps of shtlocking and priming.

Thus, you can get the finished item that will be installed on the car.

Montage with your own hands

Montage do it yourself should be done in slower. The factory details, as a rule, are fully attached and are installed on standard seats. In the case of the manufacture of a spare part on its own, the motorist must calculate this moment and foreseen. Of course, in some cases you will need to make additional holes and install fasteners that are not factory. Then it should be considered to think about the processing of such places by an anticorrosive or other protective agent.

Nissan Almera was first submitted to the public in 1995. The model belonged to the C-class and was produced in 3 body modifications - three-door hatchback, five-door hatchback and sedan. The car was built on the front-wheel drive platform N15. Since the release of Nissan Almera has been subjected to change several times, moreover, the tuning of this car is greatly successful.

A very rare person can buy a car that will fully suit it and will bring maximum pleasure. In most cases, people acquire such a car that suits them at a price, it can be considered a good vehicle today, quite economical and well suited for ride around the city - all this can be said about Nissan Almera. Some buy such a car and go on it until they buy the next, and others prefer to change and configure the car exactly as you want. How to achieve this? Sufficient enough tuning Nissan Almera.

Tuning Nissan Almera Classic

Tuning any car is needed, first of all, in order to decorate the vehicle, it is impressive to highlight it in the stream of other machines and to draw attention to others. Tuning is taken to divide into three types: external, internal and technical. External tuning Nissan Almera Classic is very attractive and incredibly diverse.

You can add an aerodynamic kit on the car, which will allow not only to change its appearance, but also will help reduce air resistance when driving at high speeds. However, making the installation of aerodynamic supplies need to be remembered that this will lead to a significant reduction in the road lumen, it is possible that due to this, the lower part of the body will hurt the road irregularities. It is possible to drastically change the appearance of Nissan Almera if you have a body kit that will be made by individual order. Often, after this operation, it becomes difficult to find out the brand of the car, but in any case, this is a very original solution, examples of which can be seen on photo tuning Nissan Almer.

For a visual increase in the car's feed, you can install a spoiler for the trunk.

The difference of car color is now very popular, which can be used, making tuning Nissan Almera. To embody it into life, it is enough to take a carbon film and cover some parts of your car.

Some car enthusiasts to improve the technical characteristics seek to make the engine chip-tuning, but the specialists of such a decision are not approved due to the fact that this operation in the case of Nissan Almera does not bring much benefit.

Tuning Salon Nissan Almera

Not much different from tuning salon of any other modern car. You can replace some details, add inserts from carbon, if you wish to carry out global changes, you should make a lagging out of the interior using the color material that you like and which is perfectly combined with all the parts of the cabin. In addition, a good idea will be replaced by a car machine, install air conditioning, make good noise insulation. The most important thing is that in the car's cabin there is always nice and comfortable to both the driver and passengers.

Tuning Nissan Almera N16

The N16 car is one of the most popular models of the brand Nissan. The car received high marks from many motorists due to their undoubted advantages. Nissan Almera N16 is ideal for riding in the city and trips to quite long distances.

Despite the fact that this car has an excellent design, high level of comfort and safety, and its characteristics fully meet the requirements for modern cars, many owners seek to make something new on it, add part of their character. It is for this that tuning operations are calculated.

What exactly needs to be changed in the car should solve the owner itself. It should be said that many car owners prefer not to change the Nissan Almera too much, limited to simple styling. A similar situation can also be observed if we are talking about Nissan Almera 2014 tuning. Perhaps it is on this that it should be stopped when the purpose of tuning is the desire to make the car unusual and unique. However, some motorists seek to improve the engine, suspension, brakes and many other important details in order to achieve the most efficient work of their car.

On May 11, they gathered with the family to go home and in 50 km dialing the speed within 150 km \\ h, my engine explodes. I was driving in the extreme left strip and how heard an explosion and crash, quickly turned on Avvarikka and went to the right to the side ... I thought about the sound and sensations that the body was torn off, but after a couple of seconds the brake pedal became wooden and the steering wheel ... from under The hood fell smoke .... opened the hood, I watch the engine burns, quickly took the fire extinguisher and hung fire .. piston outward. I realized that I came ...

Let me remind you that the engine was installed quite recently, it was bought after the major repairs and the bulkhead from the words of the seller, the person my friend will not lie, so it was decided to take the engine ...

When the engine was installed on the car in winter, after I started, I noticed that the valve was knocking. But it seems like not much, so I decided to wait until the engine warms up. It seems like a knock disappeared, but no ... at idle it knocks on the movement with transmission with any it seems and does not knock. Travener rolled up. I distilled off the 2 stages on the rally and 1 workout and everything, then there was a breakdown of the body, the rupture of the spar, which I could not eliminate and the car was practically in the garage. But as soon as the snow came down, I began to try to dispel the wheelbarrow on the Moscow Ring Road. 3 departures on the winter almost bald rubber gave the opportunity to ride only 160 km / h. Further, the car was no longer dispersed ... changed the rubber for the summer, 1 departure in the Moscow Ring Road 140 km / h and a trip to the village, which ended unfavorably.

So about the opening. Today on May 16, 2014 disassembled half the engine. He took off the head of the cylinder block and was horrified by what he saw. At first, the oil ran out of the second pot when I took out the ignition coil. And then removing the GBC saw the main thing ... The piston group is so worn out, which is surprising that the car traveled in this engine. Immediately found the cause of the knock. It turned out to be knocked out the valve to the inlet in the first pot, which they say clear scars from the valves on the piston ... Going on the pots. The second pot of the piston himself strongly burned, but not breathing. The third pot is good, and the fourth surprised the most. The piston in it burned to the rings on the upper edge closer to the inlet valves. Here you have a major overhaul or engine bulkhead professionals hundred. When contacting services, it is better to always be next to your favorite machine ... It is a pity that I immediately did not follow the compression in this engine, it was my mistake ...

As a result, after the explosion in the engine, the rods broke the rods in three pots, 1, 2 and 4. The third pot of the intake, the rest failed ... The rods of the stunned dwarre was carried on the road ...) The pallet broke out. Here, slowly disassemble and remove all the mounted, boosal wiring and the killed engine ...

Now the plans are full sweeping of the engine compartment, bringing it into full order and planting a new heart to my dear and beloved Nissan Wolf.

Refinement of Nissan Almera Classic is quite often difficult to be lack of parts that are needed for work. However, you can take advantage of the methods of upgrades that do not require the search for original items. Such methods include chip tuning and external auto refinement. Let's look at how to reflash the ECU of the Almera engine on the example of Classic, G15, N15, N16 and H16 models, released in 2014.

1 Almera chip with RS Chip - will it help in the modernization of the "miracle device"?

To date, there are two most common ways to improve Nissan performance. The first is the installation of the so-called "miracle box" RS CHIP, and the second is to replace the software in the motor motor ECU. Comparing the two of these methods of chip tuning, most of the specialists are more inclined to the second option. It was the flashing in practice that showed itself as the most effective way to increase the capacity and dynamics of models of 2014 in. However, you should not underestimate RS Chip, and now we will tell why.

Nissan Almera

Nowadays, chip tuning by mounting RS Chip is quite high in the circles of owners of expensive premium cars. As for the drivers of models G15, N15, N16 and CLASSIC from Nissan, here the views of motorists differ greatly. Some say that this method of improvement does not give any result, the second - categorically disagree with it. In fact, those and others are right. The thing is that RS Chip is not suitable for chip tuning all cars in the general and model range of Nissan in particular.

In practice, the installation of RS CHIP will give more effect to modifications N15 and N16, issued by the Nissan concern in 2014. This is due to the feature of the design of the control units of these models. So, Bosch blocks that are supplied with these modifications Nissan have not enough RAM. It essentially interferes with car owners to perform chip tuning by replacing software. It remains only RS CHIP, which helps to improve the characteristics of the car without the memory damage of the main unit.

Installation of the device must be performed on the engine, which is in perfect condition. For this, N16 or N15 must complete the full diagnosis of the motor, the replacement of filters, gaskets, and the replacement of engine oil. Only after that you can proceed directly to chip tuning. To connect RS Chip, you must open the trunk of the car and find under the wiper blades of the motor ECU. On the panel, located closer to the Almera Motor, you need to find the OBD II connector to which the device will be connected.

RS CHIP for connecting

After you have connected RS Chip, you need to check the motor. To understand that the work of Almera systems has improved, simple enough. The first sign is the sound of the engine of 2014 in. As in N15, so in N16, the motor will work more aggressive and louder.Especially good is heard at high gears. The work of the Nissan exhaust system will also change - the car will throw much more recycled gases. Another pleasant surprise - the failures will disappear when switching from the second to third transmission, which often bothered the owners of the N16 model.

In total, the engine power N15 after chip tuning will grow by 25%. In N16, this indicator will reach almost 32%. The torque will increase by about 15 and 20% in N15 and N16, respectively. All these changes will allow Nissan to accelerate for 2-3 seconds faster and without twitching to move onto the second hundred. Do not forget about improving the reaction of gas pedal and stabilizing the work of the suspension. Now your Almera will be much more confident to pass twists and small obstacles. The gas pedal will be clearer and faster to transfer your Motor teams. Another pleasant change is to reduce fuel consumption. The drivers N15 will be able to save up to 1.5 liters of gasoline for every 100 km, and owners N16 - up to 1 liter.

2

If RS Chip is ideal for chip-tuning models N15 and N16, then its use will be absolutely useless for other almera modifications. Thus, the Classic and G15 models released in 2014 are best to improve the usual method, that is, replacing the standard on the motor control unit. The reason for this lies everything in the same RAM. These modifications are equipped with SUZUKI ECU, which supplies its blocks 512 MB of OP. They are more than enough to ensure stable operation even several times of the rebelled block.

Ecu Nissan Almera

In order to have passed successfully, it will take a little tinker with the search for the desired firmware. The main requirement is to download it only from the official site of Suzuki, and not from other sites. First, so you do not pay anything, as the utilities are in free access. Secondly, the firm guarantees the quality and reliability of all its firmware. The second important nuance is the name of the utility. For the Classic model released in 2014, you need to search for programs, in the title of which there is an OSM end, and for the G15 chip-tuning models you will need to download the program with the end of Omnk. The third important factor is the firmware must be in the form of a zip archive. So it will be easier to install.

In addition to the new program, you need to purchase a K-Line adapter, 2 USB adapter and the CHIPLOADER program. The flashing should be held on a laptop with installed Windows XP. The work algorithm looks like this:

open the hood of the car and pull out the unit of the ECU without turning off the wiring;
connect one end k-line adapter to a laptop, and the second to the OBD connector of the block;
install the Chiploader and go to the data folder about the machine block;
we find a file with extension.pdf;
open a new firmware through the zip-archiver;
indicate the final folder with the factory firmware;
customize the work of the car through the CHIPLOADER program;
we look at the intended result in the "Visualization" window;
we click "OK", agree with the warnings of the program;
at the end of the firmware, we turn off the K-Line adapter from the block and put the ECU to the place.

The chip-tuning made by us will definitely change Almera. First, the motor power under the hood Classic will grow by 33%, and in the G15 model - by 35%. It will have a positive effect on the dynamics - the car will quickly gain speed and better keep it on a straight road. The Nissan suspension also yields to change - Almera will smoothly enter turns, and the side slope will become much smaller. The work of the 2014 electric appliances will change a little - now your Classic or G15 will not slander when the air conditioner is turned on. Also, subject to the use of the original K-Line adapter, the Almera engine will warm up faster in the cold and cool much longer.

3

Many drivers of Almer cars issued by Nissan in 2014 are complaining of poor noise insulation in the back of the machine's interior. Moreover, this applies not only to budget CLASSIC, but also more expensive G15, N15 and N16, which came out in 2014, why such a flaw was allowed to find out. It is better to consider an independent replacement of regular noise insulation in the Almera trunk on the example of the classic model. Before proceeding to replacing noise insulation, you need to decide on the material and purchase it. Many Nissan owners prefer to buy modern materials made from chemical components.

Noise insulation Auto Salon

Their main disadvantage can be called high cost and a short period of operation. It is better to give preference to the usual felt, which is much more reliable and cheaper.

After buying a material, you can start disassembling the Almera trunk. There are several nuances that depend on the model. For example, Classic and G15 modifications, released in 2014, are equipped with an additional shelf, which you need to be extremely neat. Models N15 and N16 have spare pockets on the sides of the trunk. To establish noise insulation, you need to cut it with these pockets. After that, we completely dismantle the full firmware of your Nissan. As a result, you should stand only naked metal. Further, if you have a classic model, it is necessary to clean the surface of the metal from the anti-corrosion coating. We process the body with a solvent and wait for it drying.

At the next stage, we need to make the necessary frozen frozen frozen and transfer them to felt. Try not to do too many felt pieces, better if you cut 3-5 middle parts. Next, we set them to the salon Almera. So that the material is glued, you must apply a thin metal sealant on dry metal. Without waiting for its drying, carefully put the material. First, felt felt at the top of the trunk classic. Hold felt 30 seconds, then let go. We look, whether the material with the body completely grabbed. Where the silent slices remained, you can put some more sealant. Next, we set the material on the sides of the trunk. Installation algorithm is the same. In the end, it will remain caught the lower part of the trunk classic.

After you have installed felt, you need to press it to the body. In the lower part of the trunk, you can put heavy items, and at the top tightly glue a few stripes of painting tape so that it bite and the material and the body of the almera. The same thing is done on the sides of the Baghtik Nissan. In such a position, the car should remain about a day until the felt completely grabbed the body. Next, you can install shelves and other accessories and continue the operation of the machine.