Skoda Yeti is a compact urban crossover, which is the most affordable SUV model on the Russian market. Reliability, comfort, handling and high quality workmanship are the main advantages for which this car is bought. There are practically no problems with servicing the Yeti if the car is under warranty. But when the warranty period ends, problems arise. Since the Skoda branded dealership provides only paid services, the owners of a supported crossover have to choose whether to sell the car or leave it, resigning themselves to expensive repairs. There is a third option, which is the most preferable - for example, to carry out maintenance on your own in order to save on maintenance. Moreover, even an inexperienced owner can cope with some procedures. One of these procedures is changing the engine oil. But first, you need to choose the right oil so that the engine will last as long as possible. This article provides recommendations for choosing a high-quality lubricant, as well as recommended oil parameters for Skoda Yeti engines.
The most optimal option
Experienced motorists fill the Skoda Fabia engine with only proven lubricants. Among them there is a certified oil General Motors Dexos 2 with 5W30 parameters ... This high-quality consumable is ideal for almost the entire Skoda Yeti engine range. The oil has passed many tests, according to the results of which it was recognized by international experts, and most importantly, it was approved by the official Skoda management.
The parameters of the oil in question are impressive, and fully correspond to the markings indicated in the Skoda Fabia user manual. Let's pay attention to the parameters of General Motors Dexos 2 5W30 oil:
- ACEA Compliant - Grades A3, B3, B4 and C3
- API Compliance - Supported SM / SL / CF Classes
- Quality certificate from the Volkswagen concern, which includes Skoda
- Suitable for use in all cars of the VW group, from Skoda to BMW and Porsche
Analogs
The above grease from General Motors is a more affordable analogue compared to the original Skoda oil. As you know, the Yeti crossover comes from the factory with Skoda oil already filled in, which is considered to be of the highest quality. It is from the parameters of this lubricant that it is necessary to build on, and give preference to other brands. In any case, all the necessary specifications can be found in the instructions for the Skoda Yeti. Then these parameters should be compared with those indicated on the product packaging.
For example, General Motors Dexos 2 grease fully complies with the standards of the German brand. So, the following standards should be indicated on the packaging with oil:
- VW501.01
- VW502.00
- VW504.00
For gasoline and diesel engines, there are parameters of tolerance, viscosity and ash content. Let's consider them separately for each Skoda Yeti model range:
Lineup 2013:
SAE Viscosity:
- All-weather - 10W-50, 15W-40
- Winter - 0W-40, 5W-50
- Summer - 20W-40, 25W-50
- Oil type - synthetic
- Recommended brands - Mobile, Castrol, Shell, Xado, Valvoline, Lukoil, ZIC, GT-Oil
Lineup 2014
SAE Viscosity:
- Multigrade oil - 10W-50, 15W-40
- Winter - 0W-40, 5W-50
- Summer - 20W-40, 25W-50
- Oil type - synthetic
- Recommended brands - Castrol, Shell, Mobile, Xado, ZIC
Lineup 2015
SAE Viscosity:
- All-weather - 10W-50, 15W-50
- Winter - 0W-40, 0W-50
- Summer - 20W-40, 25W-50
- Oil type - synthetic
- Recommended brands - Shell, Mobile, Castrol, Xado
Lineup 2016
SAE Viscosity:
- All-weather - 10W-50
- Winter - 0W50
- Summer - 15W-50, 20W-50
- Oil type - synthetic
- Recommended brands: Shell, Castrol, Mobile
Lineup 2017
- All-weather: 5W-50, 10W-60
- Winter: 0W-50, 0W-60
- Summer: 15W-50, 15W-60
- Oil type - synthetic
- Recommended brands - Shell, Castrol, Mobile.
Output
Thus, based on the information received, when choosing a suitable lubricant, you should focus primarily on the recommended parameters. The fact is that today there are many manufacturers who produce fake oils. Such a product often does not have any certification, and can only attract a low price. You should not buy the cheapest oil, especially when it comes to grease for the Skoda Yeti. It is also not recommended to mix different oils as they have different properties. If possible, it is necessary to fill in the factory grease, and among analogues, choose GM oil or other products with the appropriate parameters.
Video
The engine on a Skoda car undergoes wear and deformation over time. To prevent this process, it is necessary to correctly select the motor lubricant according to the tolerances and specifications from the manufacturer. High-quality oil will not only ensure the functional performance of the system, but also protect it from damage.
What are the tolerances for Skoda of different models
Skoda Rapid
The Czech manufacturer indicates in the manual a VW Long Life III lubricant with a viscosity of 5w30 for Skoda Rapid models with engine powers and displacement:
- 122 h.p. TSI - 1.4 L;
- 86, 105 hp TSI - 1.2 L;
- 105 h.p. TDI - 1.6 L
For more powerful powertrains, the manufacturer recommends VW Special Plus 5w40 oil. It is poured into the atmospheric engines installed on the Rapid.
At the factory, a new car released from the assembly line is filled with Volkswagen branded grease with tolerances of 502 and 504. When performing maintenance, specialists can offer motor oils with other specifications and tolerances. For example, Skoda service centers can offer oils from the Shell, Mobile or Castrol brands.
Skoda Octavia
The manufacturer recommends pouring synthetic-based products into the power units of the Octavia A5. As for the tolerances, they must comply with the VW 502/504/505/507 standards. Viscosity - 5w40, 5w30. However, when performing MOT, 0w30 grease is poured in. Car enthusiasts prefer:
- Motul 8100;
- Castrol Edge;
- Shell Helix Ultra;
- Neste City Pro;
- X-Wedge;
- Liquid Moli.
- TDI 2.0 - 3.8 L;
- TDI 1.9 - 4.3 L;
- TSI 1.8 - 4.6 L;
- TDI 1.6 - 3.8 L;
- MPI 1.6 - 4.5 L;
- TSI 1.4 - 3.6 liters;
- TSI 1.2 - 3.6 liters.
According to technical regulations, oil change is performed after 15 thousand kilometers or earlier, depending on operating conditions.
Octavia 7
The operating instructions indicate that for vehicles with a flexible drain interval, it is necessary to fill in oils with VW 504 tolerances if the engine has a volume of 1.2-1.4-1.8 liters and is equipped with a turbine.
It is recommended to fill VW 507 in turbocharged engines with volumes of 1.6 and 2.0 on diesel fuel. If a limited interval is set on the car, then lubricants with tolerances of 502 are suitable for gasoline internal combustion engines.
The Czech manufacturer fills Skoda Octavia 7 cars with Castrol Edge 5w30 oil by default. It complies with Long Life III tolerances, which can be stamped on the canister in conjunction with Volkswagen specifications.
After passing MOT, motorists prefer to change the branded lubricant to alternative analogues from manufacturers:
- Mobil;
- Shell;
- Motul.
The viscosity index is selected based on the operating conditions and temperature indicators of a particular region.
Speaking about the replacement frequency, it is worth starting from the applied tolerances. It is best to replace the car oil upon reaching 10-15 thousand kilometers.
Volumes of liquid poured into motors:
- TSI 1.2-1.4 - 4.2 liters;
- TSI 1.8 - 5.2 L;
- TDI 1.6-2.0 - 4.6 liters.
Octavia Tour
The replacement interval for the Octavia Tur ICE systems is from 10 to 15 thousand km, depending on the operating conditions. The manufacturer recommends synthetic lubricants with an index of 5w30 or 5w40, depending on the parameters and engine size.
The amount of oil to be poured is up to 5 liters. In terms of tolerances, the product must comply with VW 503-504. Tolerances of older VW 501-502 versions may also be suitable.
Skoda Superb
Volkswagen uses factory synthetic 5w30 oil for Skoda Superb internal combustion engines. It meets VW Long Life III approvals. This is essentially the same lubricant as Castrol SLX. In service centers, a synthetic base lubricant from the manufacturer Shell is poured into the motors.
You can also fill in motor oils from other manufacturers. The main indicator is the compliance of tolerances 502-504 and viscosity grades of the product 5w40, 5w30. Also, do not forget about the oil change frequency recommended for turbocharged ICE systems. If the Superb model has a 2.0 TDI engine, then it is better to use a Castrol 5w30 with a 507 tolerance.
A lubricant with VW 504 tolerances must be used when a mileage of 15 thousand km is reached. Some car enthusiasts prefer to replace after 10 thousand km. The regulation allows for an earlier replacement if the car is operated in harsh climatic conditions.
Skoda Yeti clearance
The original GM Dexos 2 grease is suitable for the power units installed on the Skoda Yeti. It meets the VW and LL approvals. The following tolerances are indicated on the packaging:
- VW 504;
- VW 501;
- VW 502.
Service centers for atmospheric systems of 1.6 MPI internal combustion engines operating on gasoline use Shell Helix or Castrol Edge with viscosity indices of 5w30. Such power units comply with VW 502/504/505/507 tolerances. Experts also offer to fill in motor lubricants from manufacturers:
- Motul 8100 5w40;
- Total 9000;
- Liquid Moli.
When deciding on a choice, special attention should be paid to specifications and viscosity. As a rule, 4 liters are used for Skoda Yeti engines. Replacement is carried out based on climatic conditions. The recommended frequency is 10-15 thousand kilometers.
Oil in the ICE system Skoda Fabia
Motor fluid for the Skoda Fabia model must have VW 502-505 approval and a viscosity grade of 5w40 or 5w30. Castrol Edge recommended.
You can also pour compositions on a synthetic basis with a viscosity index of 0w30. In Skoda service centers, specialists use such an oil for Fabia with an engine size of 1.4.
The Skoda Yeti crossover was introduced in 2009. The car is equipped with petrol turbocharged TSI engines with a volume of 1.2 to 1.8 liters with a capacity of 103 - 160 hp, an atmospheric 110 hp 1.6 MPI engine and 1.6 TDI and 2.0 TDI turbodiesels with a capacity of up to 170 hp, 5- and 6-speed manual transmissions, 6- and 7-speed robotized gearboxes DSG or a hydromechanical automatic with 6 steps. The model has front- and all-wheel drive (with a Haldex rear axle plug-in clutch) versions.
What kind of oil to fill in Skoda Yeti 1.8 depends on the operating conditions of the car.
TOTAL QUARTZ 9000 5W40
TOTAL specialists advise as an oil for Skoda Yeti 1.8 TSI TOTAL QUARTZ 9000 5W40, when the manufacturer specifies the required property level VW 502.00 / 505.00. This universal engine oil is excellent for turbocharged and direct injection engines, and thanks to its outstanding protective properties, this engine oil for Skoda Yeti 1.8 TSI reliably protects engine parts from wear in the most difficult driving conditions, including urban, sports and off-road driving. as well as cold start. Special detergents and dispersants in its composition prevent the formation of deposits and keep the engine clean. The high antioxidant properties of TOTAL QUARTZ 9000 5W40 allow you to adhere to the maximum oil change intervals recommended by the automaker in the Skoda Yeti 1.8.
TOTAL QUARTZ 9000 ENERGY 0W30
Engine oil TOTAL QUARTZ 9000 ENERGY 0W30, created using synthetic technology, has a high low-temperature fluidity, therefore it is recommended to use this oil in Skoda Yeti 1.8 TSI, which are operated in cold climates. The low pour point ensures pumpability of the oil even in severe frost and facilitates cold starts. The characteristics of TOTAL QUARTZ 9000 ENERGY 0W30 guarantee protection against wear and harmful deposits in all conditions and, in addition, reduce friction losses, which allows you to achieve lower fuel consumption when using this oil for Yeti 1.8.
TOTAL QUARTZ INEO LONG LIFE 5W30
Low ash engine oil TOTAL QUARTZ INEO LONG LIFE 5W30 is recommended for Skoda Yeti with TDI engines of all modifications. It is designed for use in vehicles that meet modern environmental requirements and meets ACEA C3 and VW 504.00 / 507.00 standards. A special formulation of Low SAPS with a low content of compounds of metals, phosphorus and sulfur optimizes the performance of the particulate filter and prevents clogging and premature failure. This oil for Skoda Yeti can be used in any operating conditions and guarantees a high level of protection against wear and deposits. The oxidation resistance of TOTAL QUARTZ INEO LONG LIFE 5W30 allows, in accordance with the recommendations of the automaker, to increase the oil change interval.
Which oil to replace and when?
Use oil for these motors only with approvals VW 504 00; 507 00, as well as viscosity 5W-30... According to the regulations, an oil change is made every 15,000 km or every 12 months ... Under our operating conditions, we recommend changing the oil every 8,000-10,000 km or every 12 month v .
Spare parts required for oil change:
Original spare parts:
Spare parts analogs:
* - indicated different packing of oil, both items do not need to be purchased.
The cost is approximate and shown for 2017.
Replacement procedure for Skoda yeti 1.2 TSI CBZB:
1. Under the hood, open the oil filler cap.
2. We take out the oil dipstick, not completely, so that the air gets in. 
3. We loosen the oil filter, but do not remove it, let the remaining oil in the filter drain. 
4. Remove the engine crankcase protection, unscrew the self-tapping screws for the wheel arch liners, and then the bolts of the protection itself. 
6. Let the oil drain. Drain until the oil drops slowly drop. 
7. We twist new drain plug and tighten to 30 Nm. 
8. We wash the drain plug and the adjacent part of the pallet from the oil. 
9. Install the crankcase protection in place. 
10. Unscrew the oil filter.
Pay attention to the oil filter bracket, a seal from the filter may remain on it, as in our case, it must be removed.
11. Remove the oil filter seal. 
12. Wipe the oil filter seat from the old oil. 
13. Install a new oil filter and tighten to 20 Nm. 
15. Fill the engine with new engine oil.
Approximate oil volume including oil filter change 3.6 liters.
16. Wipe the oil filler cap seat. 
17. Close the oil filler neck. We wash the valve cover if oil is spilled. 
18. We start the engine, let it run for 2-3 minutes, then turn it off and let it stand for 3 minutes in order to glass the oil. We look at the oil level, if the oil level is slightly above the middle, then we do not add oil, if not, it is necessary to add oil.
From the min mark to the max mark, approximately 0.7-0.8 liters of oil is included.
We present to your attention the official answer to the question “ Which engine oil should be used in Skoda cars“! We, in your Skoda service, know that it is Shell helix, keep it in stock and fill these cars. But we often come across such bewilderment of Skoda owners about Shell that we begin to think that we ourselves are not catching up with something. What kind of oil did they try to present to us as the official Skoda oil ... And Castrol, Liqui Moly, and even Pentosin! Of course, each time they brought up emotional arguments, referring now to dealers, now to familiar mechanics, now to forums.
We began to wonder where such conflicting information came from. We called the dealers. We heard from them Mobil, Castrol, Shell.
We called the services specializing in Skoda. They said “I have Castrol on my BMW on the cork, but Skoda is also German”, “What will be available?” ”.
We read the forums. It feels like the world champions are gathered there, if not in rallies, then in circuit races for sure! Well, or experts in tuning and finishing engines. One says that at first he drove to a Castrol dealership, then filled in Liqui Moly and felt an increase in several horsepower. The profile says that he sells contact lenses. How, can you explain, the lens dealer was able to feel the increase in several horses on the Skoda Fabia? Someone writes that at first he poured Mobil, bought in Ashan at a price of 1400 rubles for a five-liter canister, and then bought it for almost the same Mobil for 1600 and the car started to start better ... A third friend said that his mother-in-law does not like oil does not want to change, but wants a saber and a bulldog puppy. In general, it was not possible to get official information from there.
We called the Skoda plant in the Czech Republic. They were offended and replied that oil was never used at all, and that they only had pure hops, malt and water. It turned out that they had called the Krusovice brewery by mistake.
And all would be fine, but after all, we are forced every single day to eliminate the technical illiteracy of Skoda owners, explaining which oil should be poured. And again we hear something like “And they told me in the store that Liqui Moly is better” ... And they don't believe, and even try to argue. It's a shame, honestly! It feels like we are trying to deceive everyone and are engaged not in explanations, but in excuses.
You need some conclusive proof that Skoda really recommends Shell. This will not be shown on Channel One, there is either no official information on the Internet, or they do not trust it, dealers randomly advise different oils, no one can write anything intelligible on the forums either. If only a Skoda came to us, it would have the coveted Shell badge on the lid or under the hood ... Then we could poke our noses into this badge of all doubters!
And now our prayers have been answered! Yesterday Skoda Octavia came to computer diagnostics and troubleshooting, which could not be seen in the other two services. We opened the hood and amicably dumbfounded, not believing our eyes!
Skoda engine oil
Here! In English it says in black that Skoda recommends Shell Helix engine oil! Finally! We even made a discount on diagnostics!
To the attention of Skoda car owners! Your vehicles must be filled with engine oil only Shell helix! And the point. Yes, and do not forget that in the Russian Federation, you need to change engine oil once every 7,500 kilometers... The only way. No 15,000 kilometers from replacement to replacement! Have pity on your motor. Anyone interested in why, call, we will advise. Well, do not forget that engine oil has so-called tolerances, which must also be taken into account. Oil with a 502/505 tolerance can be purchased under the article number, and oil with a 504/507 tolerance (stricter and more modern tolerance) can be purchased under the article number.
