The Lada Vesta car is a domestic sedan released by the Factory of Aathovaz in 2015. Unlike standard tires and discs, the size of which did not exceed R13-R14, the wheels were installed on this model, the parameters of which were reached R16-R17. It is very important to know, especially for lovers of cast discs.

Tires Lada Vesta

The first modifications of the Lada Vesta car were produced in a pair with wheels R15, but after some time of operation, the developers of this model decided to slightly increase the size of the factory discs and tires to R16-R17. This is directly connected with an increase in the resistance of the car on the road, and the improvement of its manageability. Also, there was a variant of Lada Vesta "Concept", on which the size of the wheels reached R18.

Regardless of the configuration of the model, the quality of the tire remains the best, therefore the difference in controllability on different modifications of Lada Vesta is practically not significant. During the creation of this model, AvtoVAZ engineers turned for help to Belarusians, to obtain the highest quality tires, under the famous name "Belshina".

From the moment on the car Lada Vesta, the installation of Belarusian tires was made, the parameters of which were as follows: 185/65 / R15. According to her type, they treated the famous brand "Art Motion". This denotes that before installing the data of the tires on the car, a number of tests prepared by Spanish engineers took place above them.

For a long time of existence, the tires "Belshina" showed themselves pretty well, and when installing them by Lada Vesta, they add a number of the following positive characteristics:

• High level of controllability, wet coating, and by a small water layer. This effect is achieved due to the presence of special arc grooves located on the inside of the tires. When the wheel is found on the puddle, the water will instantly leave from under it, through the data of the grooves.
• The outer side of the tire has several large textured blocks, which allows the Lada Vesta machine to not lose controllability, even with a sharp turn at high speed.
• Very large plus tire data is a low noise level provided by a special design of the protectors.
• High term stability, which is achieved due to the presence of three longitudinal grooves.
• Excellent dynamics of Lada Vesta car, during idling. Its provides wide convex grooves located along the tires.
• Improved braking that affects the reduction of the brake path.
• And the last, important plus tires "Belshina" is that they have a rather small cost, compared to the rest of the world brands, and very high quality, not inferior in the market.

In addition to the tires "Belshina", on the "luxury" version of Lada Vesta, the tires of German production are established, from the company "Continental", which occupies a 4th position among world tire manufacturers in the world.

The size of such tires and disks - 195/55 / \u200b\u200bR16. They refer to the category "Eco Contact", and have the same good characteristics as "Belshina".

Drives Lada Vesta

In the factory version of the Lada Vesta car, alloy wheels are installed, the size of which is R16 and R17. These disks are manufactured by the company to & k, which is now leading on the whole Russian market. It manufactures alloy wheels R16 and R17 for cars, including Lada Vesta, injection molding.

In the "luxury" version of Lada Vesta, two variants of the disks are envisaged, the dimensions of which are R16 and R17:

• K & to Anna 15 6x15 4x100 Dia 60 Es 50;
• K & to Ptalomey 16 6x16 4x100 Dia 60 em 50.

For an additional charge, the third version of the West can be installed on the Lada Vesta car: K & to Ptalomey 17 6x17 4x100 DIA 60 Es 50. By type, they are the same as previous options - cast. But the size of them is somewhat different, which positively affects the resistance of the car.

After buying the Lada Vesta model, many have a desire to replace the standard alloy wheels to alternatives, which are of the same size, but absolutely different design. In this case, recommended by parameters, wheels for Lada Vesta will be:

• Discs R16, 175/70 and 205/60;
• Discs R17 175/55 and 195/50;
• Tires whose size will be exclusively R16 and R17, respectively.

As for the discs for the Lada Vesta concept version, their size should be R18 235/4. Such a wheel is significantly different from the other versions of Lada Vesta, due to its large diameter - 668.7 mm. On the concept version, disks with the size R17 will not fit.

All recommendations, data in this article relate to summer tires. But when choosing winter rubber, the owners of Lada Vesta will definitely face a number of problems. For example, the narrow wheels are most suitable for this model, since they are more resistant on slippery surface, rather than a wide variant.

November 23, 2015

Alloy and stamped discs, summer tires on Lada Vesta - characteristics and sizes that buy?

Replacing tires and disks on Lada Vesta should be made only in accordance with the table, where the permissible sizes are presented. In addition, when replacing, it should be guided by the recommendations from AvtoVAZ existing in the manual.

Content


• Wheel parameters on Lada Vesta

  The acquisition of new tires and discs for the domestic model of Lada Vesta is a responsible event, since it is precisely from them that the car manageability will be dependent. Consequently, only products with recommended AvtoVAZ characteristics can be set on Vesta. That is why when replacing, it is necessary not only to navigate the table existing in the manual, but also to fulfill the manufacturer's recommendations.

  Table permissible for Lada Vesta Tire sizes, disks, as well as tire pressure:

  Tire dimension with load capacity and speed indexes	Dual dimension		Air pressure in front / back tires, MPa (kgf / cm 3)
  	rim width (in inches)	ride departure (em) .mm
  Installed by the manufacturer
  	6J.	50		0,2/0,22(2.1/2,1)
  Allowed to be installed during operation
  185/65 R15 88T, N 195/55 R16 87, 91T, H	5J, 5 1/2 J, 6J, 5 1/2 J, 6J	50	0.21/0.21 (2.1/2.1)	0.21/0.21(2,1/2,1)

  Number of holes - 4; The diameter of the location of the centers of the fastening holes on the wheel disk is 100mm.
  * Speed \u200b\u200bindices - T (up to 190 km / h) and p (up to 210 km / h). Loading indexes - from 88 to 560 kg and from 91 to 615 kg.

  * Et (Rim departure) is the distance measured from the plane of the disk (valve) to the middle of the rim.

  *** Partial load - designated in the salon three adults, but without cargo in the luggage compartment.

  **** Full load - denotes the presence of over three adults in cars, or three adults and boosted in the luggage compartment weighing 50 or more.

  For Lada Vesta AvtoVAZ admits the installation of winter tire ties M and S with the dimensions specified earlier, the speed limiter is up to 160 km / h, as well as the index Q.

  Which wheels to buy for Lada Vesta?

  Selection of disks

  Choose your favorite disk and click try or buy. All presented disc models coincide in size with factory recommendations.

  R15 - Stamped Disk

  R15 - Beautiful alloy wheels for Vesta at 15

  R16 - Beautiful alloy wheels on 16 under Lada Vesta

  Pressure calibration - for this it is used a pressure gauge. Pressure parameters are also indicated in the table. AvtoVAZ warns from the operation of the machine with pressure in the tires, which differs from the written in the manual for Vest. With such rubber, the handling and stability of the Vesti deteriorates, and the wear of the tires is accelerated. In any case, it is necessary to inspect the spool on the subject of possible air leakage. If the reason in it, it is required to replace or at least trust. In the absence of such, but when air bleed from the tire, it is recommended to refer to the corporate station, where the tire will be repaired.

  

  To check the tire pressure, use the pressure gauge.

  Working - it should be done either at the Lada dealer, or with the use of special equipment. It is necessary not to disturb the sealing layer of the tire. In the work it is extremely important not to unbalance the wheel, for which it will be necessary through the shame to make a mark on the tire (opposite the valve), and when the back assembly is focused on this label. Also, the installation of new tires implies the mandatory balancing of Lada Vesta wheels at the dealer station.

  

  Wheel balancing is performed at the station with the appropriate equipment.

  Wear - so that it is uniform, it is required to periodically rearrange the wheels on the axes, as indicated in the manual.

  

  Wheel permutation scheme to Lada Vesta.

  Riding - In motion, it is recommended to be careful. It is not necessary to quickly go on the road with a bad coating (pita, in the influx of asphalt, etc. Defects). In addition, during parking it is worth avoiding the wipes of wheels about border stones. All this can provoke an imbalance and disrupt tire tires (tubeless) Lada Vesta. To the dealer or on the branded station must be sent immediately if the vibration begins to occur while driving.

  

  Fast ride on poor-quality road surface is invalid.

  The process of replacing the wheels on Lada Vesta

  To begin with, it will be necessary to prepare for work. At first, Vesta must be parked on a flat platform and high-qualityly fix the auto, putting it on the parking brake, with the first transmission at the same time. After that, you can get from the luggage compartment the spare parts and the necessary toolkit.

  If Vesta "shod" in stamped discs, it will take carefully to remove the caps. Next, you need to weaken the tightening of all the bolts of the changing wheel, after which you can install a jack (the place is noted for it). When installing the jack, it is necessary to ensure that its foot is located accurately under the emphasis, and the excavation existing in his stop was in the rib of the threshold.

  

  First, you will need to remove the cap, and then weaken the bolts that are fixed by the West Wheel.

  After that, you can lift Lada Vesta by 50-60 mm. Next, the bolts are unscrewed completely, the wheel is removed, the spare place is installed in its place, and the bolts are fed again. Then it is necessary to omit Vesta back, remove the jack and tighten the bolts with the movement crosswise. If there is a cap, it will be necessary to put on the wheel.

  

  The correct location of the jack under the threshold of Lada Vesta.

  The defective wheel must be put in a niche in the luggage compartment, securely secure it with a screw stop and close the rug. Checking the quality of the tightening bolts must be carried out in 1,000 km after installation. If there is a need, they will be needed to tighten. The same set of actions is carried out with each replacement.

  

  Placement and fixation of the spare wheel in the luggage compartment of Lada Vesta.

One of the important parameters of any machine is the wheel size. After all, it is this characteristic not only defines an attractive appearance, but also directly dictates how much the car will be convenient to control, affects its dynamic indicators, as well as on the permeability. Below will show the main sizes of tires for Lada Vesta, which has already managed to earn popularity from our motorists.

Original tires

As you know, the composition of any wheel includes a tire and wheel drive. Moreover, they may be of different sizes. The "Vesti" manufacturer sets the following size for the wheels of its new car (I mean the simplest package): 185/65, and this is at a radius 15. The indices of other indicators are 88h or 88t.

All of these wise figures displays the following parameters:

• Width, mm: 185.
• Profitability: 65 percent of the width ((185/100) * 65).
• Discs, radius: 15 '.
• 88: Maximum weight of 560 kilograms.
• H: Speed \u200b\u200bindex (less than or equal to 210 km / h). In the case of t instead of H: less or equal to 190 km / h.

The manufacturer of such wheels is the enterprise "Belshina", and the wheels themselves received the name Artmotion. Products are characterized by sufficient softness of rubber, which has good endurance along with an excellent clutch of the road and a low noise level. An option for the cold season is called Artmiton Snow.

On the most low-cost equipment "Vesta" tires are installed on steel stamping. The dimension of these discs is as follows: 6J15T504х10060.1. Alternatively, it can be installed alloy with the same parameters. Such discs produce K & K enterprise, and the Disk Model is called Anna-15.

The above dimension is decrypted as follows:

• 6J: Width Width (6 'here).
• 15: Installation diameter (15 'here).
• ET50: departure (here 50 mm).
• 4x100 (diameter of the circle of the centers of mounting holes or PCD). Installation is performed on 4 bolts that are 100 mm in a circle. Sometimes such a parameter is called a breakdown.
• 1: Plant diameter of the disk hub (DIA).

The richest configurations of "Lada Vesta" The manufacturer equips the following sizes: 195/55R1691N. or 195/55R1691T..

Decrypt these numbers:

• Width, mm: 195.
• Profile height: 107.25 mm, which is 55% of 195.
• R16: Width of the disk in (16 'here).
• 91: Loading rate (for figures 91 it is 615 kg).
• H: The speed indicator (less than or equal to 210 km / h, in the case of T: less or equal to 190 km / h).

Such tires for autohydigant produces a German enterprise Continental. The model is called Ecocontact. However, alloy wheels are not made by Continental, but K & K (the Disk Model is called Ptalomey 16). Disks have dimensional data 6JX16ET504X10060.1. In fact, they differ only in the size of the landing, it is 16 inches.

However, on the most inexpensive configurations of Lada Vesta, similar wheels can be installed and the same discs - the truth as an optional feature.

The car in the LUXE version for individual money can also be equipped with wheels (moreover with 17-discs) of a similar model of the same manufacturer: Ptalomey 17. Below in the table you can see the sizes of wheels for Lada Vesta:

Additional sizes

Many motorists mount discs and tires of different dimensions on their car, moreover, for various reasons: it can be repairs after an accident or simply modification. Let us try more detail in adequate mounted options on Lada Vesta tires and disks of an abnormal size. We will also consider the advantages and disadvantages of this operation, as well as the consequences of possible installations that are promising serious losses in the working parameters of individual nodes and aggregates (including early breakdowns).

If the car owner just decided to change the tires on his car (without resizing), there is nothing terrible in this. But in this case, it is necessary to ensure that all tires contain the same protector, as well as equal to the degree of wear (at the same time, the tread is allowed to differ only for the front and rear axles).

Drives from other "Lada" will not fit

Machines having a size of 185/55 radius 15 (Recall that these are products of the plant under the names of "Kalina", "grant" and "prior") have not such a size, like the "Vesti", although the cavity and look like the same. The fact is that the landing wheel diameter of the above models of machines 1.6 mm less (it is 58.5 mm).

If you try using a turning force to fix this hole to the desired size, in any case, the PCD indicator for such discs will not be 4x100, but 4x98, as a result you will receive three bolts of fastening, absolutely not matching with the mounting holes. As a result, the cooality of the disk and the hub will be broken, and the movement of the car will be accompanied by beating.

Enlarged disks

Such discs do not simply change the appearance of the machine, dynamic indicators, control, stabilization during driving are also dependent. Often all this data when replacing larger disks change for the worse.

If you are interested in this installation, always remember that the increase in the disk certainly promises the choice of other tires (necessarily smaller profile). The fact is that the external tire diameter in any case cannot be more recommended by the manufacturer (do not forget about the arches of the wheel), otherwise the tires will be scratching around the arms (especially on turns), and this, as you understand, is completely good.

During 12-month tests on the Lada Vesta car, the following sizes were successfully installed:

• Radius 15 - 175/70 and 205/60.
• Radius 16 - 185/60.
• Radius 17 - 175/55 and 195/50.

Note that the discs of diameters 17 'were put on the test modifications Vesta. In principle, 18-inch discs are allowed to mount on the car, but the external diameter of this tire is almost 670 mm, the width is 235 mm. These parameters differ greatly from the plant recommended by the plant, and, despite the formal possibility of installation, real domestic roads will not give such tires to ride normally (low-profile tires) - road irregularities will quickly spoil the wheels - we note, at their price, several times higher than the original.

Benefits of mounting large disks:

• Visual effect, the car is becoming more fashionable.
• Increase dynamic properties, road stability, return of the steering system.
• Little response from road element.
• Lean attitude to the suspension resource (with a profile of at least 55%).
• Reducing the distance when braking.
• Improved ESP, ABS systems.
• Reducing braking length;

Disadvantages of mounting large disks:

• Lack of convenience when moving (large transmission to the cabin and on the wheel of damage to the roadbed).
• Unwanted riding in bad roads.
• Increased control over tires.
• Increased fuel consumption due to the need for increased energy consumption when attacking.
• High price.

Pressure

Many beginners do not take into account the pressure in the wheels, but, between those, it is extremely important - and this applies not only to low-profile, but in general any tires. The magnitude of this indicator is necessarily written by the manufacturer in the manual for working with the machine, as well as on the body in an affordable place. In particular, for Lada Vesta, such a mark has a central rack from the driver's side.

Each car owner perfectly understands the importance of the correctness of the tire selection for his car. From this directly depend on the stability and running quality of the machine, as well as traffic safety. Therefore, for each brand, the manufacturer necessarily indicates the required parameters of the wheels, as well as the list of the most optimal models of tires and wheels. This list includes several types of rubber for different operating conditions.

Lada Vesta is a sedan of domestic production, which is produced by the VAZ plant since 2015. A feature is the size of the Wheel Vesta wheels with the R16-R17 parameters, unlike earlier models for which the use of the R13-R14 size is characterized.

Initially, this model was produced to the market with wheels of 185/65 / R15. Gradually, the manufacturer decided to switch to discs on Lada Vesta increased size reaching 16 to 17 inches. The solution to put discs of another dimension made it possible to significantly increase the handling and stability of the Vesta on the road.

Features of standard tires

Supplied from the LADA conveyor is equipped with the Belarusian tires of the Belshin plant, which are designed specifically for this car and differ in fairly high quality. Tires are in Lada Vesta in their type to the Art Motion brand. This fact suggests that in the process of production, the rubber is running a series of tests in accordance with Spanish standards.

Tires in practice showed excellent parameters, guaranteeing a number of advantages:

• High handling, including on flooded asphalt water. This contributes special arcuate grooves placed on the inside of each tire. These grooves play the role of a kind of drainage system, along which water is removed from the wheel.
• On the outer part of the tire there are increased embossed blocks that increase the stability of the machine on steep turns.
• The protector is selected in such a way that the noise level is the minimum possible.
• Three longitudinal grooves are responsible for the course stability of the machine;
• Small rolling resistance reduces fuel consumption and improves speed characteristics.
• Increased coupling qualities provide a small braking path and exclude slip.
• An important role is played by a small cost of this rubber with relatively high quality.

Lada Vesta in the "luxury" configuration is equipped with Tires of the German manufacturer of Continental in size 195/55 / \u200b\u200bR16, which are among the best on the world market. The most suitable tire size and.

The factory set of disks includes 16 or 17-inch alloy wheels of the company K & K. This company in the Russian market today occupies a leading position.

Selection of West Disk

No matter how good wheels are in Lada Vesta, sooner or later they have to change them. The harsh conditions of our roads negatively affect the duration of operation of any wheels. Also, some car owners have the desire to change the standard wheels of the new car to alternative, with another design.

• exclusively 16 or 17-inch tires;
• alloy wheels 175/70 / R16 or 205/60 / R16;
• alloy wheels 175/55 / \u200b\u200bR17 or 195/50 / R

What drives are suitable for Vesta? The most suitable can be considered the following patterns of wheels:

• K & to Anna 15 6x15 4x100 Dia 60 Es 50;
• K & to Ptalomey 16 6x16 4x100 Dia 60 em 50;
• K & to Ptalomey 17 6x17 4x100 Dia 60 Es 50.

The latter model is characterized by dimensions, which changes the stability of the car for the better.

If winter tires are required for Lada Vesta, it is better to choose narrower, as they have a higher resistance at low temperatures and a slippery road characteristic of winter conditions.

Buying wheeled wheels for Lada Vesta It should be noted that the breakdown of Lada Vesta is somewhat different from the previously used. From what kind of breakdown is used, the compatibility of the wheels depends. These discs are designed for fastening with four bolts, and their dimensions correspond to the sizes of bolts for Korean cars, which significantly expands the range of disks for this machine. The diameter of the fastening holes is 100 mm.

If there is a need to install discs from light alloys, here you can recommend PDW products, which specializes in the release of discs of adhesive and cast types for domestic machine brands. Therefore, PDW disk parameters as much as possible complies with the standards adopted on the vase.

It should be remembered that the installation of the wheels of the inappropriate larger diameter significantly reduces the comfort of driving, especially when driving potholes and other irregularities. Increasing the width increases almost all the quality of the wheel, except for stability on the wet road.

18-inch discs

This part-size disk is used in modification of Lada Vesta "Concept". The total diameter of the wheel is much larger than on other modifications and is 668.7 millimeters. The size of the rubber in this case is 235/45 / R18. And replace them with 17-inch will not work.

Last year, sales of novelties of domestic production started - Wagon Lada Vesta SW Cross. Maybe the domestic domestic left in it, but we did the car, in our factory! And from the fact that the car was successful in terms of design, design and sales, you can only rejoice for a novelty. A distinctive feature from all previous models produced in AvtoVAZ, has become at least the installation is simply huge (by the standards of Lada). We have already told about them in one of our articles, and today we will analyze the topic of Lada West Svz Cross tire.

Lada Tires Vesta Sv Cross, as well as for any other car, are one of the most important elements. Not only the handling and braking path depends on them, but also such indicators as fuel consumption, road stability, acceleration, total engine power. In addition, tires affect the comfort of driving and wear the suspension as a whole. That is why it is important to apply only a tire provided by the manufacturer.

The table below shows the size of Lada Lada Vesta Cross SV.

After analyzing the table, we can conclude that the manufacturer is recommended to use only one rubber size - 205/50 R17 with different looped indices and speed.

But what to do to those who want to put rubber sewn or higher?

It is allowed to put the rubber slightly wider, for example, in this case, rubber is suitable width 215. You can also use a narrower rubber, such as width 195.

Tires and wheels Lada Vesta SW Cross
Tires	Disks
195/65R15	6.0JX15 ET37
205/55R16.	6.0JX16 ET40.
205/50R17	6.5JX17 ET41
205/45R18.	7.0JX18 ET38.
215/45R17	7.0JX17 ET38.
215/40R18.	7.0JX18 ET38.

To put the rubber below or higher, you will have to play additionally with the disk diameter. It is done by the rule: "The higher the tires - the less the diameter of the disk, and vice versa." For example, to put in Lada Vest of CR Cross Tire 65, you will have to purchase discs with a diameter R15. Full tire dimension information is given in the table above.

If you read the first part of the material, but did not understand what they mean all these numbers, now we will explain everything. For example, we have a tire with an inscription 195/65 R15 91 T XL. The name and model are not interesting for us, only the parameters themselves.

The first number is a tire width in millimeters. In our case - 195 mm.

The second number is usually written through the oblique line and indicates the height of the tire as a percentage in relation to the width. In our case, it is 65% of the width of 195 mm, i.e. Approximately 127 mm.

The letter R denotes not the radius, as is customary, but simply indicates that the tires have radial cord. All modern tires for passenger cars are produced precisely by such technology.

The number after r denotes the disk diameter in inches, for which the tire is intended, or the inner diameter of the tire. In our case, this indicator is 15 inches.

The following designation in rubber marking is the number 91. It denotes the limit load on one wheel or the load index. In our case, it is 615 kg. For passenger cars, this figure is not so important, but for trucks it is of great importance. Full information about the load indices and the corresponding masses are displayed in the table below:

The letter t in the lades lads lads lads. Cross denotes the speed index. In other words, this is the maximum permissible speed, from which you can move by car equipped with such tires. Holding to the table below, it is easy to calculate that on tires with labeling T you can ride no more than 190 km / h.

And finally, we reached the last indicator. XL - denotes that the bus is amplified. Those. If XL is indicated next to the marking, then the maximum mass will be not equal to 615 kg, but by three units, i.e. 670 kg.

There are also other designations. For example, seasonality tires. Winter tires are always indicated by snowflake. M + S (M & S, MUD + SNOW) - All-season tires. Rain tires are usually indicated by an umbrella icon.

This is basic designations. There are other, such as the direction of the tread, which allows you to install the wheels on the car and others. But basic designations for 80% of drivers will be enough.

Tire pressure Lada Vesta Cross

Lada Vesta tire pressure Cross sv is a very important indicator, since it depends not only by car handling and the overall comfort from driving, but also the safety of tires and disks. The fact is that at high pressure in the tires will be very uncomfortable to ride uneven roads, and this can also lead to premature tread wear on the central part of the tire.

Too low pressure in the tires allows you to ride more comfortable - riding will be smooth and soft. But at high speeds there is a risk of losing control. In addition, rapid wear of the tires are possible along the edges, and when entering a hole or on a hammer, damage to the tire and disk is possible.

Based on the foregoing, it can be concluded that the pressure in Lada Wester's tires should be from 2.1 to 2.5 atmospheres, depending on the manner of driving and the usual level of comfort. It is not recommended to overestimate or underestimate the pressure.

In order to choose the tires on Lada Vesta Cross, you must first of all determine where the machine will ride and under what conditions. If the car goes around the city through smooth roads, then you can do the low-profile rubber. If the machine is used on the primer, it is better to take rubber higher to feel all the irregularities.

An important is the noise of rubber. For a comfortable driving, you need to choose softer rubber. In addition, it is necessary to take into account the tread pattern to pick up the tires correctly. At the moment there are four main types of protestors:

1. Symmetrical directional
2. Symmetrical non-directional
3. Asymmetrical non-directional
4. Asymmetrical directional

Symmetrical directional

This type of tires is excellent for speed driving, as well as resistant to aquaplaning. The protector perfectly copes with the removal of water from the spot spots. But the minus of such tires is increased noise.

Symmetrical non-directional

This is a universal type of tires. It does not work well with the drainage from rubber, but is suitable for a slow ride almost for any type of drivers. But such tires provide a comfortable ride on any types of roads - both in gravel and highway.

Asymmetrical non-directional

The outer part of these tires has a tougher structure that is resistant to damage. And the inner part of the tires is sharpened by drainage. The central part is responsible for the course stability. However, these tires have minuses - a very weak absorption of vibrations due to the rigidity of the center and the outer part.

Asymmetric directional

This is the rarest option. At the moment is not produced. Such tires were invented with the aim of effective drainage and smooth distribution of the load on the entire surface of the tire. But the difficulty of using was to be a spare wheel, since for the ordinary car they had to be taken over 2 pieces.

As you were able to make sure, ideal tires for Lada West Sv Cross does not exist. Each tire has its drawbacks. Therefore, you need to select tires, taking into account the running style, as well as weather conditions in which the car will be used.

In order to choose the winter tires for Lada Vesta Cross, let's go to our favorite site of Siberia Wheel. In search by car, unfortunately, it is not possible to choose Lada Vesta Cross, so we will look for factory sizes.

Select width, height and diameter and press the search.

As we see, the shortage of summer tires on Lada Vesta Cross in our city is not. There were 77 plates of tires in the price category from 3250 to 10,400 rubles per wheel. In general, you can choose. I would stop at any average for 4500-5000 rubles. For example, I really like the low-profile toyo. They are most suitable for my driving style and stand quite lifting money. But, back to winter tires. We put in the search for a tick opposite the "Winter" and get all the options for winter rubber. And this is 48 modifications. There are both friction tires and studded. Price range from 3250 and to 15,090 rubles per wheel. I am more like studded wheels, so I will choose from them.

For example, the model Nokian (Nordman) 7 93t Schip can be bought for 6160 r per wheel. Judging by the reviews of my friends, this is quite a suitable tires for your money. Do not forget that we choose the low-profile winter tires of Lada Vesta Cross, so the price can bite! A set of such rubber will cost us 24640 rubles. That today is quite lifting money. Moreover, we will ride more than one year on this rubber. With a good scenario, it will serve us for 3-4 years.
That's all. Thank you for your attention to new meetings!