Any wash machines through a period of time come into disrepair, and most often they are simply sent to the landfill. But some details can be given a second life. For example, the engine from the old washing machine, failed, can be the basis for a new homemade device or tool. There are many different options for its use with the benefit of household. True, it all depends on the fantasy and the skills of a home master.
Types of engines
The type of electric motor selected for the homemade depends on the age and model of the machine for washing. For example, if it was old, from the Soviet times the wash machine for washing, then on it, most likely, a reliable asynchronous type electric motor was installed. Such a motor from the washing machine has a capacity of 180 W, has excellent indicators of torque and is the most comfortable engine for homemade. Also in the hands of the wizard there may be a two-speed electric motor, a collector motor or engine from a modern cm of any model and class.
Asynchronous motor
Asynchronous electric motors used for washing units can be with two or three phases. But from about 2000. The production of motors with two phases almost ceased, and they were replaced by more modern three-phase, with frequency adjustment speed of rotation.
Such a device consists of a stator, which is a fixed element of the electric motor and the rotor, leading the device drum.
The advantage of this device is:
- In a simple design.
- Easy in service.
- Low noise.
- In low cost.
The disadvantages include large sizes, low efficiency, complexity of electrical circuits and its management. Such electric traffic can sometimes meet in old, inexpensive models for washing. In powerful modern devices, they are not used.
Collector Engine
Such electric drives are used since the 90s and are considered practically universal due to the possibility of connecting them not only to the variable, but also by constant voltage,
The electric motor has an aluminum case in which the collector rotor is built into, a stator and a block with contact brushes.
The advantages of the collector motor:
- Small sizes.
- Smooth revolutions by increasing or decreased voltage.
- Ability to work with different types of voltage.
- There is no binding to the frequency of the electrical network.
The disadvantage is expressed in the frequent change of contact brushes and short-term operation.
Inverter drive
This is a direct drive motor, which is also called an inverter electric motor. It has no collector rotor. Developed by the Korean company LG and refers to the latest technologies. The mass production of inverter drive motors began from mid-2005 due to reliable, durable and simple design, they strongly hold the leading position in the electric drive market.
To the advantage of the inverter actuator can be ranked:
- Compactness.
- Low vibration typewriter.
- High efficiency
- Lack of contact brushes and belt transmission.
- Almost silent work.
The lack of inverter engines in the form of a complex electronic control circuit is most likely due to manufacturers than consumers,
Connection and start
When dismantling the electric traffic with a washing unit is recommended on all its wires to make special marks. These actions will continue to help connect the motor directly to the electrical network (this applies to asynchronous electric motors from the old washing units where the connection of starting capacitors is required). The remaining types of motors also have their own characteristics.
Therefore, to properly connect each type of electric traffic, it is best to search for information on the Internet or use special reference literature for this. And if when dismantling all contacts were labeled, then run the motor from the washing device will not be much difficult. To do this, you just need to follow the instructions for connecting a specific type of engine to the network and adhere to the security rules.
Second life of the electric motor
From the old, failed machine for washing it is possible to make a lot of homemade for household needs. For this, many of its elements, including the case, drum, covers, etc., are most often manufactured by aggregates for use in economic purposes, homemade workshops or garages - using a motor.
You can use the electrodist from the washing unit, for example, making homemade juicer into the kitchen, vibrotole for the workshop, as well as makes many other useful devices and devices that can significantly simplify the home master some types of work.
Grinder
For the manufacture of a grinding machine, a high power motor is not required, and in terms of the number of revolutions, any electric feed from the old machine for washing can come.
To build a machine, you need to prepare a support plate from trimming a thick wooden board for it and secure an electric motor and a switch, taken from the same wash machine. For attachment, metal brackets can be used.
Next, cut the thread and secure the adapter-nozzle for fastening the sharpening circle. You can prepare an adapter with a neck for a cutting abrasive circle to the nozzle. Then there will be a cutting machine, which can be cut plastic pipes, as well as reinforcement, metal sheet or corner.
As a result, it may turn out a compact, portable and almost universal grimaceous-cutting machine, which is not needed to use electric welding.
Cubezka and grainrid
Another homemade to help the one who is engaged in agriculture can be made from the electric motor shot from washing equipment. This grain crusher and the bubbler in one subject.
Transformation of the laundry laundry machine in the bubble does not require great effort. To do this, only the body of the machine with the top load of linen and the electric motor itself is. The case can be purchased at the points where the scrap metal is taken or searching in the landfill.
The aggregate manufacturing technology itself for feed cuts will be as follows:
The fixture made by its own will cost much cheaper and will work almost no worse made in the factory conditions.
Making a solution
For those who are going to build or make repairs in the future, the Motor from Washing can be useful for the manufacture of a full-fledged solution that will be able to facilitate the construction work process and at the same time save considerable funds. This will especially be favorable for residents of the countryside, where the construction process almost does not end.
The process of making a solution is in about the same way:
This design is convenient because it works like a swing, and the cooked solution can be easily pouring out of the stirrer, just tilting the tank.
For mixing the solution, it is best to use a washing tank from the machine with vertical loading. Its containers are just enough for the knee of several buckets of the solution.
The activator is removed from the tank and the hole is tightly closed for draining water. Instead of the activator, the shaft is installed on which the steel strip with leaf blades is mounted inside the tank.
The tank is stacked and fixed to the movable frame, welded to the base of the stirrer. Outside to its bottom, an electric motor connected to the shaft is fixed. For this purpose, two holes are drilled in the bottom of the tank, which are located on the motor body, after which the tank is rigidly attached to the bolts to the barrel.
After that, it remains only to connect the electrodist and experience the operation of the solution.
How to make a lawn mower
The self-made lawn mower is one of the use of the electric motor from the writtenbed washing machine. This tool will be useful to the owners who own a household site or dacha. At the same time, homemade does not need to buy any additional spare parts that can always be found in the barn or in a landfill.
The homemade lawn mower with a motor from the wash machine can be made in this way:
On this, the manufacture of self-made lawn mowing is completed, and it is ready for work.
The area of \u200b\u200busing electric motors from washing machines is very wide. Many material on homemade can be freely found on the Internet - on thematic sites or forums.
Looking at the old washing machine, any hostess dreams to replace it with a new assistant. Homemade craftsman, on the contrary, do not rush to throw out the typewriter in the pit. He reflects on where you can adapt this "wealth".
Answering the question of what can be made from a washing machine, carefully consider it from all sides.
We will see that there are many useful hubs and units that can get a new life in the hands of a good wizard.
Judge for yourself: the case and engine, pulleys and drum, a window with a hermetic door, relays and switches - the list of components, from which you can make a lot useful in the farm and mechanisms.
Let's study together the most popular empty options from old washing machines, both ordinary and automatic.
Grinder
The first thing that is worth paying attention to after inspection has served your homemade washing age - the engine. It is enough for the capacity for the manufacture of homemade sharpened. Complex improvements here will not need.
For the shaft, you need to make an adapter nozzle on which the grinding circle will be attached. If there is an additional "neck" for the cutting circle on the landing site, then together with sharpening we will get a cutting machine. They can cut not only plastic pipes, but also metal (fittings, leaf or corner).
As can be seen in the photo, the engine of the washing machine is attached to the bed with four brackets. The switch for it is removed from the same washer. As a base, the usual trim of the thick board is used. The option turned out quite acceptable, especially if you consider his mobility and ease of manufacture (welding is not required).
Here is another similar version of using the engine for the installation of grinder and cutting circles. By putting on a common adapter, they are clamped with a nut with left-threads.
Simple crafts from the old washing machine
Not every person knows how to masterly work with welding or lathe. Nevertheless, even in this case, for the old Washingle, you will be able to find decent use. Look at the window that closes the drum. This is a masterpiece of engineering art and find for design.
Not causing a custody, many use it for a direct purpose, but in an updated context. Cut the wash door with a part of the housing and you will get a great "marine" porthole. It will look original in any interior.
If you love your yard guard, then definitely decorate his booth with this modern "facade".
In addition to the original type, this option is of practical importance: the dog can be easily isolated from guests if necessary, without fear of their legs and clothing.
Just do not forget to make lateral ventilation holes in the booth (the window has a hermetically waste machine!).
Coffee table from Washing
Your old washing machine machine, or rather her drum will help decorate the interior of the apartment. From it you can build an original coffee table. Perforated stainless steel supplemented with color backlit looks great.
Make such an unusual piece of furniture in the style of High-tech is easy. It will take several steel rods that need to be attached to the washing drum. They record a round table top of glass or MDF plate.
Mangal
The housing of the washing drum, made of durable and high-quality "stainless steel" withstands very high temperatures. Therefore, it can be used as a mangala.
Several pipes, half an hour of work with welding and on your estate there will be a comfortable bracket for kebabs. Having made the supporting part of the collapsible design, you can take it with you to country picnics.
For the manufacture of mangal, drums are suitable from frontal machines, as well as from styrels with vertical loading. In this case, you will have to trim one of the side of the body with a grinder, and it is reduced to the bottom with a stable support.
Mobile smokehouse
Why buy expensive smoothie for fish and meat, when in the economy costs an old eraser? There are many options for its use in this capacity.
We will dwell only on your mobile device. It can be made of a drum dismantled from a vertical loading machine.
So that smoke did not leave through the side perforated holes, they need to drown out with a thin steel sheet, wrapped and securing it around the case. From above, as it should be in the real smoke, we make a hole under the smoke tube. Inside the drum fix the smoke grille (you can take from the old gas stove).
Concrete mixer
This is a rather complicated device, which besides the kneading concrete, should provide its unloading. Therefore, going to make a concrete mixer from the old washing machine, we will first stick your locksmith skills and knowledge.
The easiest way to turn the washer-barrel into the device for the kneading concrete is replacing the standard activator Nadvep-shaped blades. They can be made of thick 4-5 mm steel strip. To do this, it needs to be cut off in size, then bend two blades and deploy relative to each other by 90 degrees.
After that, they need to be welded to the shaft passed through the remote activator hole.
A hole for a drain that is in each washer-barrel must be drowning. Next, we do depending on how much concrete will need to be kneaded. If we are talking about 1 bucket, then you can leave an old single-phase engine.
If you need to prepare a large amount of concrete, then you will have to install more powerful (0.75-1.2 kW) to the place of the old motor (0.75-1.2 kW) with low revs (1300-1500 per minute).
In addition, the "native" belt transmission must be replaced by a gear reducer (from 1300 to 25-30) and increasing the torque on the stirrer blades.
It should be noted that the best quality of the kneading turns out when it does not rotate the shaft with the activator, but the case of concrete mixer itself with the blades fixed in it. However, to create such a design, a deeper and complex refinement of the washing is required.
Sterilizer for conservation
For the cottage and utility farming, another homemade from the old washing machine barrel will be useful. This is a sterilizer in which a dozen heat treatment cans can be installed.
The only moment you need to consider: Such a device is suitable for sterilizing fruits and vegetables. For meat processing, a higher temperature is needed (above + 100 ° C).
The sequence of alteration looks like this:
- Put a plug on the opening of the activator;
- A thick wire mesh for cans is mounted onto the bottom;
- Under the grid you need to substitute support;
- The housing is drilled by a hole for the installation of 2 kW electrical motor.
1. The activator plug;
2. water level;
3. Tank from the washing machine;
4. Cover;
5. Hose for plum;
6. Banks with conservation;
7. Wire mesh;
8. Electrical motor (TEN) for 2 kW;
9. Electrocabel.
Juicer
Here are two options:
- Use the old machine with centrifuger and washing compartment;
- Alteration of the usual washing machine barrel.
Let's just say that the first option is better because it allows with minimal modifications to implement two processes in one device: chopping fruits and their spin. This will require a washing woman who has an activator located at the bottom, and not on the side wall. Replacing it with three homemade knives from strip steel, we will get fruishing.
Scheme installation of knives:
1. Knife,
2. shaft;
3. Clamp nut;
4. Washer;
5. bottom of the tank;
6. Bearing node with gland;
7. Activator pulley;
8. Stop screw.
A drain hole of the washing tank must be drowning.
Roodles for the second unit - centrifuges a bit. It needs to install a grid of stainless steel (cell size of 1.5 mm Wire thickness 0.2 mm) so that it closes the side surface of the centrifuge.
Thoroughly washing the drinking soda centrifuge, washing tank, hoses and pump can be made first bookmark.
The principle of operation of such a juicer is very simple. Fruits wash and small portions (1/2 -1 bucket) are loaded into the washing tank (knives should be turned on). After 15-20 minutes of cutting, the engine is turned off and shifted with a chopped mass in a centrifuge (portions of 3-4 liters). Turning on the centrifuge, press juice.
Make a juicer from a rack-barrel or a machine far harder. A homemade centrifuge can be in the barrel of the "stumbling block". Make it - half the way, the main thing is to achieve perfectly accurate centering. Without this, on high speed, it begins to vibrate strongly and squeeze juice will not be possible.
Here is a drawing of a working sample. The master had to work pretty to reduce the centrifuge's beat (the engine is suspended with the shell housing by 6 springs). Of these, 3 equilibrate the engine in the horizontal plane, and 3 others press it up. The hull itself stands on an old automotive tire, which extinguishes vibration.
Perquance machine
The housing of the old washing machine is suitable for assembling the device, with which you can shoot a pen from a bird carcass. For its manufacture, at the bottom of the tank, you need to install a steel disc with a thickness of 3 mm and a diameter, a slightly smaller diameter of the tank.
In it chopped holes and put in them special rubber fingers. They are the most expensive elements of the future design (1.5-2 dollars agencies). On average, they need 120-140 pieces. The diameter of the fingers depends on the type of pierced the bird. Consider this moment when you make an order.
All other style knots, including the engine, can not be changed. In the side walls of the housing, the holes are drilled to install the perquance (bleed) fingers. To do this, from the bottom of the tank, you need to retreat up to 15 cm.
The distance between the finger holes is chosen within 3-4 cm. The bottom disk is mounted on the drive shaft.
Hope for a drain is not necessary here. It will be needed for removal of water that flows from carcasses. Oshpariva bird in boiling water, it is placed in the tank and include the engine. Fingers from rubber quickly and cleanly remove the feather.
The ribbon grinder can be easily and easy to make from the engine from a washing machine. In proof, I propose to consider this homemade. The machine is made very simply from the minimum amount of materials. The engine was used from the washing machine, as well as the closer for the doors, which is used as a tensioner. Find your other details should not be difficult.
For such a machine, the revolve regulator will necessarily need, since the engine develops monstrous revs. Also for grinding on high speeds you need to be well balanced all the nodes, otherwise there are no strong vibrations. If the project interest you, I propose to study it in more detail.
Materials and tools that used
List of materials:
- engine from a washing machine;
- ;
- Bearings for the slave roller;
- bolts, nuts, washers, screws;
- chipboard;
- Sheet steel;
- profile pipes;
- Ribbon for grinders.
List of tools:
- Bulgarian;
- Spanner screwdriver keys;
- clamps;
- Tool for cutting chipboard.
Machine manufacturing process:
Step one. Engine preparation
On the motor shaft you need to order the manufacture of the drive shaft. You need to contact the turner. The product should be well balanced if you want to work on high speed. It is on high revs that steel processing occurs.
You also need a revolver regulator, since if you turn on the engine directly, turns will be too high, but it all depends on the type of engine and power. As a rule, very high revs are developing brush engines.
Step second. Engine installation
Next, install the engine to the base, for its manufacture, the author used the chipboard. Drills holes and screw the engine with self-draws. For more reliable engine mount, it is recommended to use bolts with nuts.
Step Three. Tensioner
As a tensioner, the author used the closer for doors. It's easy, convenient and practical. The device can be adjusted by getting the desired degree of tension, also the closer is easily attached to the base using all the same screws.
The slave roller is installed on the lever, he is assembled from the bearings, and the bolt with nuts protrudes as an axis.
After installing the tensioner, you can already install a grinding belt.
Step fourth. Stubborn planes
At the end, we need to make and install stubborn areas, for these purposes it will take sheet steel with a thickness of at least 3 mm. Cut the necessary pieces with grinding and grind them on an already made grinding machine.
We establish the supporting platforms to the machine, for these purposes there will be the necessary profile pipes, as well as bolts with nuts.
Pitch fifth. Housing
Collect the protective body around the machine. For these purposes, you can use chipboard, faeer or something like that.
After that, the machine will be fully ready for use. We proceed to testing, the author easily drags the drill on it.
On this, everything, the project is over, I hope that homemade you are interested. Good luck and creative inspirations, if you want to repeat this. Do not forget to share with us your ideas and homemade.
In some situations, it is cheaper to purchase a new product than to restore the emerging household appliances. However, a calculating person will receive additional benefits using functional components to be destined. This publication presents homemade from the engine from a washing machine .. and video phrases will help to more accurately reproduce the self-catering of masters and get useful products quickly and without excess costs.
Read in the article:
What is the most suitable engine from the old washing machine
First, it is necessary to clarify the real possibilities of the existing power unit. In the household appliance of the Soviet period, sufficiently reliable asynchronous type electric motors (180-220 W) were established. They were connected to two-phase AC networks. Previously, the design was created in the collapsible design. Therefore, with a breakdown, repair does not cause excessive difficulties. The only exception is damage to the windings. Modern models are distinguished by an enlarged power (up to 340 W).
From the end of the 90s of the last century, such simple engines are not used. Instead of asynchronous, the collector aggregates are used more often. They are more compact, weigh less. The corresponding modifications provide for the possibilities:
- dC power connections;
- smooth adjustment of revolutions.
For supplying current on the rotor part, graphite rods with spring pushers are used. These details should be replaced periodically. The power of the collector type electric motors is from 340 to 780 W at the speed of rotation of the working shaft in the range of 11400-15200 rpm.
The photo shows the power unit that the engineers of the famous South Korean brand LG applied for the first time. It is often referred to as inverter, as it is possible to smooth speed frequency adjustment (up to 2 thousand per minute) using an external control device. The power of such aggregates exceeds 500 W, which allows you to connect it directly to the drum shaft without a special belt drive. The following parameters and features of the engine from the washing machine can determine where this power unit can be used:
- power;
- work shaft rotation speed;
- dimensions;
- power and control circuit.
For your information! More attentive people pay attention to maintainability, reliability, resistance to external influences. They explore the opinion of specialists in specialized forums, official guarantees of manufacturers.
What can be made from the old washing machine: examples of work with comments
The following information will help implement different projects based on the relevant power unit. Here are the active homemade from the motor from the washing machine, which showed themselves well during practical tests. Some projects attached step by step instructions with detailed explanations of the assembly process.
How to make a grinding machine or sharpened from the engine washing machine
| Illustration | Description of action |
 | First of all, we define what removable nozzles will be applied in practice. The features of processing processes are essential: the duration of the cycles, the hardness of the material of the billets, etc. |
 | In this embodiment, the author uses grinding discs with a diameter of 200 mm with a sticky layer on the non-working side. It picked up approximately corresponding to the size of the nozzle from the "Bulgarian" (175 mm) with a threaded connection in the central part. |
 | For the implementation of the plans, the old engine washing machine was found, which rotates anchor at a speed of up to 1500 rpm. In the photo, the arrow marked a start relay fixed on the housing. Power - from AC 220 V. |
 | A special nozzle has been created on the lathe. It is attached to the shaft of 14 mm using the screw. To the end of the part is welded with a threaded rod, which corresponds to the adapter connective node. |
 | In the course of practical tests, it became clear that the initial rotation does not correspond to the direction of thread. This means that when performing working operations, the nozzle will be disfunned. The author did not apply a special electrical circuit, and changed the hull cover places along with the bearing. |
 | For reliable fixing of the power unit, a special feature is created from steel corners. Welded connections are cleaned. At the final stage, the product is covered with successively primer for metal and paint. |
 | With the use of screws to the bed, a table (1) is connected, equipped with a rotating frame. The center has a support rod (2) with adjustment in height. With it, you set the exact angle required to work with the billets. |
 | The assembly confirmed the accuracy of the calculation and individual details. To exclude errors, you need to prepare a set of drawings in advance. Optionally compliance with engineering guests. However, it is necessary to carefully understand the features of each component of the design, mark dimensions and landing dimensions. |
 | The practical test shows the good functionality of the new machine. Power is quite enough to handle duralum blanks. Additional plus - quiet operation of the engine washing machine. |
 | For collecting and removing waste, a special box with a weighing nozzle for connecting a vacuum cleaner is made. It is installed at the bottom of the bed under the working area. |
For your information! According to this algorithm, it is easy to create a high-quality grinding machine from a washing machine. To enhance security, it is necessary to use individual protective equipment during processing. A transparent polymer shield is also useful, which closes the working area.
Turning machine
It sharpened with your own hands from the washing machine to create a little difficult. However, the following example demonstrates the relative simplicity of manufacturing more complex equipment.
Since an asynchronous engine is applied from the washing machine "Vyatka", a capacitor is installed in the power circuit. Anchor of this power unit rotates at a speed of 400/3000 revolutions per minute. To install the axis parallel to parts of the frame, selected the washers of the corresponding thickness.
Lawn mower
An important nuances are marked in the picture:
- These rods (1) must have sufficient strength, as the movement of equipment by the site is performed manually.
- The engine switch from the washing machine for the convenience of the user is set near the handle. A wire (2) with high-quality insulation is used for the compound. Provide good tightness of electrical components so as not to create emergency situations in conditions of high humidity.
- Belt drive (3) reduces the level of vibrations. By changing the size of the pulleys, select the optimal speed of rotation of the knives.
- Such nodes (4) are used to adjust the lumen, the height of the lawn haircut.
- Large wheels (5) will be suitable for overcoming obstacles on the land plot.
Cormor
How to turn the engine from the old washing machine into the generator
However, special training is necessary for obtaining such a result. At the end of the rotor make a deepening. Permanent magnets are fixed in it. The upgraded item is installed in place. To accumulate the energy, use a rectifier and battery. These blocks are connected through the controller to optimize the charging process.
Concrete mixer
Here, two belties are complemented by a gearbox. The complex it turned out to create the necessary torque at relatively low power of the electric drive.
A circular saw
What can be made from the drum of a washing machine: simple designs
In practice, not only the engine from the washing machine is useful. What can be made from the drum, told in the following sections of the publication.
Mangal of drum from washing machine: photos and useful tips
A stainless steel brazier looks great. It lasts a long time saves functional characteristics and impeccable appearance. It is easy to clean from pollution. There are no sharp corners and other potentially dangerous parts. High temperatures are useful. A small weight implies the absence of difficulties when moving. The most suitable blank is a drum from a washing machine with vertical loading. It has special doors installed that cover the furnace, adjust the air flow.
Will the smoking machine work
For processing meat, fish and other foods are placed for a long time in a closed container, where a high concentration of smoke is supported. Apply low and high temperature technology. In any case, good tightness is useful.
All excess holes brew. Install the pipe for the supply of smoke. Inside mounted lattice shelves and suspensions to accommodate products.
Decorative and functional crafts from drum washing machine
These pictures contain examples of products that can be created quickly and efficiently without detailed instructions:
How do you create a persem machine from a washing machine: the use of several parts of old equipment
The photo demonstrates what can be made from the washing machine machine of an activator type. After a significant alteration, a convenient device will be obtained, which will help to automate the tedious processing process of bird processing before selling (long-strating). Such equipment is used to solve household and commercial tasks.
A similar design is created from a washing machine. In the walls of the tank and the disk installed below, rubber pins (biles) are inserted. When rotating the bottom part, these elastic elements tear the feathers from a carcass. To increase the efficiency of the process and destruction of the garbage, watering is used on the upper side of the tank.
Homemade engine from washing machine: conclusions and additional information
In any case, even when working with a relatively simple design, project documentation should be prepared. This will simplify the search for additional components, prevents the assembly error. To publish your own ideas and receiving answers to additional questions, use comments. With the help of our online magazine, it is easy to make the correct conclusion about what to do with the old washing machine after the completion of the target use of the technique.
The video demonstrates the principle of operation and features of the perosorum machine:
The washing machine, like other household electrical engineering, after a period of operation fails and is no longer repair. Therefore, you have to acquire a new one, but where did you give the old car? Of course, you can simply be thrown into disposal as MBS. But this is the impractical hosts, because the design of this household equipment includes many useful elements that can be useful in the economy. Consider what you can do from the washing machine.
What details can be used
The washing machine is a rather complicated household equipment, which includes a plurality of individual elements. The more modern, the more in its design it includes details.
Elements of washing, which can still come in handy:
Important! If you understand the electronics, then you should not throw away the control unit, which includes a large number of semiconductor components that can be useful when repairing other electrical equipment.
Application of the working engine of the washing machine
Consider some homemade from the engine from the washing machine. Today, with the help of the Internet, many homemade craftsmen are gladly shared by their own inventions, in the design of which spare parts from old washing machines were used. Consider the most sought-after.
Making concrete mixer
When repairs in the apartment, a private house may need a small amount of concrete solution. Rent for such a purpose concrete mixer is too expensive. You can build such a tool yourself, for which the case is suitable from the old wash (except for the machine).
Manufacturing instructions:
Simple concrete mixer for operating conditions is ready. With this device, you can easily prepare a bucket of the solution.
Entry from the engine from the washing machine
The working motor from the old machine machine can be used for making their own electrical emery. This is done very simply - the sandpaper (sharpened) is installed on the motor shaft. Such a tool will be very practical in the country, since it can be molded not only knives, but also shovels, axes.
Cubezka, Grainrock
Those who have a small plot of land, contains a household, does not hurt the grain mill made by their own hands, the bubble. If the electric motor machine machine is used for this purpose, then the homemade device will not work worse than the factory equipment.
Make in household conditions the bubble is easy. In addition to the motor, you will need a housing of the top loading machine that can be found on scrap metal.
It is important to understand! The engine factor of the washing machine can be used to make a variety of different economic tools that require rotation.
Worker Motor Washing can be applied to manufacture homemade toughness.
How to connect a motor from a washing machine
If the owners of the old typewriter have ideas for the further use of the engine, the question immediately arises how to connect it to the electricity network 220 V.
To begin with, it is necessary to deal with the electrical circuit, after which the engine connection to the power supply does not take a large amount of time. You need to deal with wiring. Specifically, the wires connected to the stator, the rotor will be used.
How to choose the desired wires
Look at the front of the block with wiring - the first two wires on the left are most often the wires of the tanker, through which the herald motor revolutions are adjusted. They will not need them.
Then there is a red, brown wire of the stator, and behind them two wires (green, gray) connected to rotary brushes. All these wires will be needed to connect the engine to the power grid.
Important! To connect to the power grid with a power of 220 to the engine of the washing machine, the starting capacitor is not needed, and the motor itself does not need a starting winding.
Of course, in various models of erasing wires, the wires differ in color, but the principle of connection is similar. To deal with the wiring, you need to ring each wire using a multimeter. The device must be configured to measure resistance. Then one probe device is applied to any wire, the second probe is selected steam.
A quietly functioning tachogenerator most often has the resistance of about 70 ohms. These wires are recognized primarily, removed to the side. After that, the rest of the wires are nicknamed, divided by pairs.
Connect the engine to the network
When with wires already everything is clear, it is necessary to connect them correctly:
- In accordance with the scheme, the end of the stator winding should be connected to rotary brushes (it is recommended to make a reed jumper).
- It is necessary to connect with the power grid wire of the rotor brush, the end of the rotor winding. After serving the voltage on the wires, the motor will start turning the shaft.
Important! Motors of the washing machine are characterized by high power. To prevent injuries, you must be extremely careful. Therefore, before launching the equipment, the motor is recommended to carefully fasten to some basis.
Application of drum washing machine
The drum from the washing machine, made of durable stainless steel, can be used for a variety of goals in the farm. From it you can make with your own hands a lot of practical products, such as a barbecue or a roaster for a barbecue.
How to make a roar:
- it is necessary to disconnect the drum from the old erasing together with the shaft and pulley;
- install it up with a hatch on the wheel;
- brazier is ready.
The working part of the brazier can be slightly increased. To do this, you will need a Bulgarian with which the front of the drum located near the hatch is cut. Accordingly, it will be much more convenient to put firewood.
For your information! For the manufacture of kebabs, the drum is the perfect material, as it has a huge number of holes through which the air flow will evenly inflate coals, creating the necessary heat.
Do not throw out the washing machine that has spent your time, as it consists of a variety of useful details that will still be able to come in handy in everyday life, in the country. At the same time, various adaptations made with their own hands will help save money.
