The main function of the glass of any gadget is to protect the touchscreen mobile device from damage. Taking the blow, the glass is often destroyed, cracked, covered with chips. At the same time, the quality of protection drops significantly, the view of the display becomes worse, the gadget loses its presentable appearance... Before installing a new one safety glass, you must first remove the old one. In this article we will talk about how to remove the protective glass from your phone.
What precautions should you take?
Before removing the protective glass from the iPhone, you need to take into account that the surface of the touch screen of the gadget is almost perfectly smooth. Therefore, the protective glass is attached to it quite thoroughly. Most often, it is held by electrical forces, sometimes by adhesive. The surfaces are in contact so tightly that it is simply unrealistic to remove the glass by prying it with the tip of a nail. If you use a knife blade, then there is a high probability of damage to the screen and the case of the smartphone.
The silicone suction cup is also ineffective. If the protective surface is badly damaged, then there is no vacuum under it, and the suction cup will simply fall off. When good grip glass with a suction cup is also more than enough problems. The sensor is attached to the body with a weak adhesive tape, and if you do not calculate your own forces, you can damage the cables and tear off the screen module completely. This is why deliberate, careful action is required strictly according to the algorithm.
How to remove protective glass from iPhone?
First, let's get ready and collect the necessary arsenal of funds. You will need:
- 2 plastic cards, a pick and a spatula.
- Silicone suction cup.
- Lint-free napkin.
- A glass cleaner containing alcohol (you can replace it with vodka, cologne, or rubbing alcohol).
- Medical gloves.
The algorithm of actions to remove the protective glass from the iPhone is extremely simple, but effective:
- Wash your hands thoroughly with soap, dry them, or wear gloves. It is important that the screen does not leave streaks or finger stains.
- Find an intact (or least damaged) corner on the broken glass. Press the suction cup against it.
- Pry the corner with the suction cup with a spatula or a pick to peel the edge off slightly. At the same time, help yourself with the suction cup, carefully pulling it towards you. Do not overdo it, otherwise you can tear the screen.
- As the shield peels, deepen the spatula or pick.
Important! If the screen big size, you can use 2 tools at the same time, pushing them in different directions.
- Continue to gently pull the suction cup towards you until the glass comes off completely.
As you can see, there is nothing particularly difficult. The work requires only patience, caution and scrupulousness.
How to properly glue the glass?
How to remove the protective glass from the phone at home - figured out. Now how to attach a new protective surface to the display. To new part was glued with high quality, the procedure must be carried out in an immaculately clean room, free from dust.
Important! Before gluing, soak a lint-free cloth in an alcohol-based solution and wipe the screen. This will remove dust, degrease the display and improve the adhesion of the two surfaces.
The gluing algorithm is as follows:
- Take the new glass by the edges. At the same time, hands must be cleanly washed, dry or wearing medical gloves.
- Take off protective film from the glass surface by pulling on the tab. At the same time, keep the glass closer to the screen of the gadget to prevent dust particles from falling on the surfaces to be joined.
- Place the glass surface a few millimeters from the display and align carefully.
Important! Make sure the holes on the camera, speaker, keys, and other accessories are aligned.
- Connect the glass to the screen. Bubbles can be removed by pushing them out to the edges with a clean, dry cloth.
Completed work! Your smartphone looks like new again, while you saved your money and time on the trip to the master and paying for his services. And this is always a nice bonus when solving any problems with technology.
In most cases, when it is required, it will be possible to remove the glass from the phone completely independently, without the involvement of smartphone repair specialists, but here it is important to remember some simple principles. Above all, proceed as carefully as possible and without haste. Any unsuccessful movement of yours is capable of causing some damage to the gadget's screen and its touchscreen. Exactly how you should try to remove the glass from your phone depends largely on specific circumstances, such as the degree of damage, your dexterity and the availability of various devices at hand.
When striving to remove the glass from your phone, first take the trouble to pry one of its corners. This will be easier when the protective accessory is not too damaged and has kept relative integrity. Try to pick up the cherished corner with your fingernail, and if one does not give in, grab the other and find the one that turns out to be the most pliable. If you cannot remove the glass from the phone with your bare hands, use a flat and / or sharp object to pry it off. This can even be an ordinary playing card (preferably a new one) or a simple piece of cardboard.
Many, in an effort to remove the glass from the phone, sometimes do not completely deliberate actions, for example, they use a knife as a means to pry on such an accessory. Such items are quite dangerous for the integrity of the standard display of a smartphone and can severely scratch it. Therefore, use cutting / thrusting weapons only when you are confident in your own dexterity and accuracy. By the way, it is better to make attempts to remove the glass from the phone, having previously put on protective gloves on your hands, so as not to inadvertently leave your own fingerprints on the display of the gadget.
It will be much safer to remove the glass from the phone not with a knife, but, as mentioned above, with a piece of cardboard or other flat object, such as a bank card or a special pick included with the device. When you manage to pry off the corner of the protective glass at least a little, slip such a tool between it and the standard display and start gradually deepening the gap formed, further separating these two screens. When it is required to remove the glass from the phone in case of severe damage, the compartment should still start from the very whole corner, and carefully clean off the cracked places.
The screen of any gadget needs protection. Even if you possess latest model iPhone, do not neglect installing additional film on the display. This will make it look attractive and extend its service life. How to glue a protective glass on your phone without assistance?
How to choose
There are two types of such glass: matte and glossy. The first option is more expensive. It will protect your phone from drops, bumps and even glare. Minus: Degrades color rendering.
The second option is cheaper. However, the display is only shockproof. Before buying, check the product for strength: it should not bend too much. The thicker the material, the higher the level of protection. Also good glass has an oleophobic coating. Thanks to this it does not get dirty with grease.
Features of protective glass
An insignificant disadvantage of protective glass is its high cost compared to film. It will make the smartphone heavier and bulkier. Otherwise, only pluses can be noted.
- Resistant to various types of damage. No scratches will be left on contact with sharp objects.
- Impact protection. If dropped from a height, the display will remain intact. In extreme cases, the glass itself will burst.
- Durability. The film needs to be changed every six months, and the glass can be used until it is damaged.
- No bubbles or detachment. The film sometimes comes off at the edges. The glass sits as if it were poured.
Gluing process
For the procedure you will need: protective glass, dry cloth, alcohol wipe, special liquid for cleaning computer or TV screens, dust collector or tape. No less important point - preparation of the workplace. Choose an area with minimal dust accumulation. The best option - bathroom or kitchen. Bedrooms have a lot of textiles that attract small particles.
Turn off your smartphone so that the screen does not turn on while gluing. Wash your hands with soap and water. Place the equipment and protective glass on a clean smooth surface... Remove the old film from the device first. To do this, pull the edge at a 60 ° angle. Remove dirt from the screen with an alcohol wipe. You can make your own cleaning product. Mix water and alcohol in a 5: 1 ratio. Add some dish detergent. Moisten a cloth with the product and treat the display.
Buff the screen to a shine with microfiber. If any dust remains, go over the surface with a dust collector or tape. Examine the display under lighting for lint, dust, dirt and specks.
Better to glue the screen protector to your phone in a dust-free room, such as a bathroom or kitchen.
Remove glass from packaging. Remove the film from it. Only hold the side edges to avoid fingerprints. Install the protection so that it matches the speaker and the center button of the gadget. Swipe down from top to bottom. This will help secure the patch surface.
Remove the remaining air with a spatula (included). Move from the center to the edges. Try not to press too hard on the screen. Small bubbles will disappear by themselves within 2-3 days after the procedure. Turn on the phone and test the sensor.
How to remove the protective glass
Removing protective glass is more difficult than film. If the gluing process failed, remove it using a bookmark. The latter is located on the outside of the protective screen.
