Hundreds of species are presented on the market protective glasses for mobile electronics. What to pay attention to when choosing you will learn in this article.
The most vulnerable place of modern smartphones is a screen. When falling or hitting the display can obtain significant damage, as a result of which it may break:
- glass
- touchpad "Touchscreen"
- in extreme cases - Matrix itself
- clay Matrix Connection and Touch Mesh
Replacing and repairing the display - the occupation is expensive and no one needed. Many believe that safety glass Fully protects the gadget - it is not.
Let's deal with what features and what properties are protective glasses.
How to choose a solid protective glass for your phone: Mandatory characteristics.
Let's start with the fact that there are many low-quality glasses, in order to save manufacturers, manufacturers underestimate parameters or exclude important specificationsProtecting the smartphone and make a comfortable job.
Points that are worth checking:
Studied by the manufacturer strength
The glass strength is measured on the MOOS scale, which displays the ability of the surface to resist the scratch. To create gradation, ten natural minerals were used, which scratch each other and lined up in the Moos line. Strength 9H - standard for protective glass, this means that only a diamond leaves scratches on it, it has a strength of 10H.
When selecting a protective glass for a smartphone, see the characteristics, they are in most cases on the product packaging. Choose such a product, 9h guaranteed to save your screen as entire and not intense.
Protective glass thickness
The first glasses had a thickness of 0.5 mm, such models looked not very impressive and prevented the work of the exacting, users sometimes noticed the lack of reaction to touch and gestures. Modern protective glasses have a thickness of 0.33 mm - this is the optimal indicator at which the rigidity and protection against glass deformation is preserved, the touch panel of the phone and the edges do not look thick.
Manufacturers indicate this feature On the package to the protective glass or film:
Need to choose a convenient protective glass
How comfortable you will use the phone affect the following factors:
- The presence of special coatings on the glass
- Color and mirror
- Type of surface
Protective glass with oleophobic coating - be sure!
All modern windows are made with coating to reduce the amount of fingerprint remaining from the fingers, such a coating is called oleophobic. Manufacturers accept this functionality for standard and do not indicate the packaging of its availability, but if you order cheap glass with Aliexpress or decide to buy them on the market - the coating may be absent for the purpose of saving. Be careful!
Glass color and mirror surface
We do not recommend glass with paint impurities, they distort the coloring of the screen and interfere with working with the gadget. Mirror types of protective glass are greatly bright in the sun, significantly reduce the brightness and contrast when using daily use, try to refuse them.
By the way, the tablets practically do not produce color protective glasses!
Matte or glossy?
What type to choose is to solve you. The matte glass feels very well on the bright sun, does not glare, but it causes a decrease in the sharpness of the picture.
We hope now you know which glass for the phone you need!
Before sticking a protective film, let's figure it out: is the protective film on the smartphone need?
There is no accurate answer, but let's try to figure it out.
Roughly speaking, you can share smartphones into two types: smartphones with a plastic display or with tempered glass.
The first, sake of savings, use ordinary cheap plastic on displays, which is easily scratched and literally after a week you will notice that the smartphone screen is covered with microcenarpins. As a result, after a month of wearing such a film, you will look into your smartphone through a light "haze" scratch.
The second is used tempered glass, which scratch is very difficult.
As already understandable - in the first case, the protective film is necessary to preserve the normal type of smartphone. In the second case, the protective film, IMHO, is not needed.
Protective film (Protective Film) is a thin polymer coating (transparent), on the one hand covered with glue. Usually shipped with two pasted additional layers that you must access before sticking the protective film to your smartphone.
Films differ in quality:
- Cheap - made of more rigid polymer and batter exterior. From such a film it is hard to wash off fingerprints. The finger on it slides reluctantly.
- Branded - made better. The outer side of the film is made of a softer polymer according to which the finger and divorces are perfectly slid without problems.
Tempered Glass is nothing but ordinary glass. It is processed by a special procedure. First, the glass is heated to 680 degrees, and then gradually cooled with cold air. Due to this processing, glass acquires increased mechanical strength and damage resistance. In other words, it is much difficult to scratch such a glass than the usual.
What comes with a tempered glass (or film):
1. Protective glass (or film)
2. Microfiber.
3. Blue sticker (adhesive tape) to remove dust.
4. Liquid for removing divorces (not always).
There are many different firms on the market specializing in the release of hardened protective glasses for smartphones. Depending on the thickness and strength of the glass varies its price.
Real photo smartphone with tempered glass 0.22mm:
As can be seen in the photo, the glove glass is almost unnoticed. Glass with a thickness of 0.35-0.4 mm may slightly perform.
Having experience in use and the other, I believe that tempered glass is better than the film:
- First, if your smartphone has not received a oleophobic coating (prints are hardly erased), then with tempered glass you decide the problem of the ever-dirty display forever.
The tempered glass is very smooth and with it without problems are erased by all traces of a rag from microfiber. - Secondly, if your smartphone falls the muzzle (display) down, the protective glass will take the entire blow to itself and the maximum you get the burst glass on 1000 pieces.
- Thirdly, tempered glass perfectly protects your smartphone from scratches.
- Fourthly, replacing the buzzed glass is cheaper than changing the entire display + touchscreen.
The fact is that in new smartphones, the display manufacturers are combined into one entire display and touchscreen (OGS-OGS solution technology). This significantly improves the quality of the transmitted image, but in the case of a cracked touchscreen, it will be changed together, which significantly increases costs.
If earlier the touchscreen could be replaced by paying separately 10-20 dollars, now you have to put at least 45 dollars, and sometimes all $ 100.
In general, if you wish to protect the display of your smartphone, then we advise you to use protective glass.
What happens if the smartphone with OGS display falls from 1m height:
If the master of the smartphone pasted tempered glass, then such an outcome could be avoided ...
Update 28-04-2015 OnePlus One:
How to install tempered glass, you can read.
Experiment
Manufacturers mobile devices Recently, an experiment was conducted, the purpose of which is to find out the effect of the presence or absence of tempered glass on the screen of the smartphone on its operation. The fact is that many users do not attach a special meaning of this detail and believe that the protection for the screen of the smartphone is an extra accessory on which you can save.
As the basis of the experiment, the Lenovo smartphone was taken by the R780 model, as this is the most popular and modern device in its category. As a result, data were obtained to conclude additional protection Screen that allows you to protect from many damage.
- Smartphone with installed glass
Within the framework of the experiment, for the first half of the year, the device was with tempered glass on the screen, and during this time it never changed that only confirms the quality of such protection. Of course, as a result, there was no damage on the smartphone and its condition was evaluated by experts as perfect.
- Smartphone without installed glass
During the second half of the year, tempered glass was not installed on the screen, so the device was used carelessly and without complying with security requirements. After some time, the scratching began to appear on the screen, which the ordinary man was even invisible and in general did not worsened appearance Smartphone.
After the expiration of the experiment, there were noticeable damage caused by contact with metal objects on the screen. In general, the resulting scratches did not affect the work of the smartphone, but the appearance was significantly spoiled. Considering that tempered glass is 100% protecting the screen from damage, it is better to spend some money amount to preserve its original appearance.
Where to buy tempered glass?
Since we determined that tempered glass is the best alternative than the protective film, then we advise you to advise the Internet sources where the highest quality product is implemented. Unfortunately, the price of tempered glass is significantly overestimated. Especially for you we found - clickable). This site implements the quality product that we checked personally. So you will not regret buying!
Order tempered glass, and your smartphone will be securely protected for the entire period of use!
Every time I see a person in the subway with a smartphone or tablet, the screen of which is covered with a shallow web of the broken glass, it comes aware of the fact that as it were, you did not use your mobile device, there are no guarantees that you will not be in the same situation. And even if lucky, and the screen will remain as integer, then scratches are guaranteed. For their appearance, it is not necessary to drop a smartphone. It is enough to put it in a pocket with trifle or keys. But the most wonderful scratches appear when the phone lies in the lady's handbag next to the nail file.
At first glance, there are no problems with the replacement of glass or glass with the screen. Nevertheless, people with broken devices do not become less. What is the reason? First, the price. The cost of replacement of glass or glass kit + screen is high enough, and in some cases ranges from 30 to 60% of the cost of the new device. At this price, I'll think about whether something should be changed at all. Will it turn out that replacing the glass, I again do not squeeze my gadget from the hands. But even if for someone such a high price will seem normal, or a desire to save and independently replace the glass, will soon have to face another problem. I am talking about the quality of glasses and the quality of their attachment. Of course, there are exceptions and a repaired smartphone or a tablet looks no worse than the original, but there was no such practice in my practice. A recent attempt to replace the glass on the iPad led to the fact that he spent money on the ever dug glass, I was forced to buy a new tablet. In general, it's time to think about how to effectively protect the screen of your mobile device from all sorts of accidents, and yourself from unjustified spending.
Traditional ways to protect the screen ...
Traditionally, a cover with a cover or a separate cover is used to protect the mobile device screen, as in the case of iPad. In my opinion, enough effective method Protection of a mobile device, but he likes not to everyone. The case increases the size, thickness and weight of the device, and, most importantly, hides with the original design of the mobile device.
Film on the screen is a great way to protect. Thin, imperceptible, glossy or matte. It is perfect for protection without worsening the quality of the picture and sensitivity of the touch screen. But here is not all perfect. Qualitatively glued the film is not so simple. Air bubbles and dust makes the film more than once, which does not differ in its appearance. In addition, with the time of the edge of the thin film, dust falls under it. As a result, the device looks inactively. It is also necessary to understand that the film will protect the screen only from scratches. If a mobile device falls or something falls on it, then it's not worth it for a film.
To protect against strikes, some manufacturers, in particular Sony, glue their devices to the film in the factory. This is a very dense film that is part of the screen. It can not just be replaced so that, in fact, is the main disadvantage of this approach. It would be correct if the manufacturer provided the possibility of replacing the damaged film, but alas ... As a result, the user is forced to glue another film, creating a strange glass sandwich and two films.
New ways of efficient glass protection
I heard about the new generation of shockproof films and glasses for a long time, but until I tried myself, I did not believe in their magic properties. In this review, I will tell you about your experience in using a new type of film and glasses.
To date, the line of protective films and DF glasses includes about three dozen kits for different models Smartphones and tablets, including all modifications of the fourth and fifth iPhone, Samsung Galaxy S4, S5 and Note III, as well as all generations iPad, including Air and iPad Mini. In addition, universal films for 6 "and 7" devices are included in the ruler, as well as classic super transparent and anti-reflective films. Films and glass will be released soon for HTC and Sony devices.
Features of shockproof films and glass DF
Sometimes, in the desire to save, the manufacturers use a simple cardboard envelope as a package, which cannot guarantee the integrity of the glass.
DF uses a fairly expensive plastic packaging, which will prevent the glass damage even with non-accuraate transportation. Moreover, such packaging is used not only for glass, but also for films. Exception is made only for classic supercrosure and anti-reflectors. For them, a cardboard envelope is used.
The set of all films and glasses includes everything you need for a neat and fast installation, including wet and dry napkins to remove contaminants and divorces on glass, a pair of dust stickers to remove dust falling on the glass after it is purified and rockel, which allows you to raise glass or Film does not leaving on the inner surface of fingerprints, which later do not delete. For those who first glue a film or glass, the kit has an illustrated manual in which all stages and installation methods are described in detail.
The shockproof glass has a complex multilayer structure, and the thickness can vary from two to four tenth millimeters. DF glasses have a thickness of 0.3 mm. Such a glass is quite subtle so that it is not noticeable on the mobile device, and provides 100% sensitivity of the touch panel. In this case, it is quite thick in order to withstand even strong point blows. The edges of the glass are rounded by special technology. It will protect your hands from cuts and unpleasant sensations when contact with sharp edges.
The tempered glass layer has a hardness coefficient equal to 9. To date, this is the maximum value for a glass tread tread, which allows to withstand contact with very sharp objects, including a stationery knife, keys and even nail pinks.
DF glasses have an anti-reflective coating with high light permeability, at the level of 99%. This means that protective glass does not affect the color reproduction, allowing you to see exactly the same clear and clear picture, as without glass. To protect against dirt, fat spots and fingerprints, glass have a oleophobic coating.
Shockproof films also have a complex multi-layer structure. They are made of thermoplastic polyurethane and have a thickness of 0.2 mm. The film hardness coefficient is noticeably lower than that of glass and equal to 3. But this is enough to resist the appearance of scratches from keys or trifles in your pocket.
The shockproof layer of the film has a special structure that distributes the blow in the horizontal plane, due to which the film allows you to withstand stronger strikes and at the same time it will remain an integer.
Like the glass, the shockproof films DF are characterized by high permeability of light, provide 100% sensitivity sensitivity and have a oleophobic coating that makes it easy to remove bold stains and divorces.
How to glue a shockproof film and glass?
For me, the film has always remained complex and responsible procedure, but in this case everything turned out to be noticeably easier than I expected. Compared to the classic film, the installation of shockproof glass or film takes a much less time and nerves. More precisely, everything is fine with nerves. From the first attempt, I certainly failed to install the glass, but two attempts turned out to be enough. You can also say about the film. It is enough to accurately place a glass or a film above the surface of the smartphone, then press the finger in the center and observe how it is glued to the surface of the screen, squeezing air bubbles from the center to the edges.
Impression...
Despite the fact that the thickness of the films and glasses does not exceed three tenths of a millimeter, compared with the traditional film they look quite thick, which caused me a question: Will the appearance of my mobile device be wrong and how will the tactile sensation change?
I tried glass and films on the Samsung Galaxy Note III and iPhone 5, and, as you can see, neither in any other case, nor the film, nor glass do not affect the appearance of the smartphone. As for tactile sensations, when using glass, they do not change at all. It feels the same chill of glass and natural gestures. The film provides the same level of sensitivity as the original glass, but does not sensate a cold characteristic of glass coating.
Some tactile changes can be noted when using the button on the Samsung Galaxy Note III. In the original design, the button protrudes over the screen surface. After installing the glass, the button turned out to be slightly recessed, but it does not interfere with its normal use. On the contrary, this option seemed even more comfortable and neat me.
Speaking about tactful sensations, I can not once again not pay attention to smooth surface Glasses and its oleophobic coating, thanks to which I did not feel any differences when controlling your finger. The differences were discovered only when using the pen in Samsung Galaxy Note III. The pen is not so good sliding on the glass. When creating handwritten notes, it is practically not felt, and if you want to draw, using barely noticeable strokes, you will have to change the skill with the pen. The shockproof film looks almost the same as glass. It has its own characteristics, but in general, the feeling when using the film is very similar to the sensation from the glass.
Go to tests of protective properties of films and glasses. I spent two tests. First, let's see as far as glass and films are resistant to the appearance of scratches. For this test, I chose the key with the most sharp edges, strongly pressed it to the glass surface and tried to scratch it within 30 seconds. As a result of intensive impact on the glass there is no uniform scratch.
Now I will spend the same test with the film. Here the result was somewhat different. Traces remained on the film surface (not scratching, namely traces) from the sound of the key. This is due to the structure of a film that has a smaller hardness coefficient. I note that after some time the tracks from the key disappeared.
The second test will allow you to evaluate the shock-up properties of the films under consideration and glasses. Here I used the bundle of keys whose weight is about 70 grams. The same key that I tried to scratch the glass and the film turned out to be an ideal tool for studying shockproof properties. It is longer and harder to other keys, and at the same time has a stupid protrusion, which, with a vertical fall, creates a fairly serious load on the subject subject.
So, an attempt to split glass iPhone.The shockproof film DF has led to the fact that even when the key bundles fall from a height of one meter, the glass remained completely integer, but at the very film, in the depth places, dents were formed. Due to its internal structure, which distributes the strength of the blow in the horizontal plane, the film allows you to withstand sufficiently strong blows.
With the glass, the situation is a little different. It solved the drop in keys from the same height, however, unlike the film, cracks appeared on the protective glass. At the same time, the glass of my iPhone did not receive any damage.
Conclusion ...
Having studied in detail features different models shockproof glasses and DF films, I made a single conclusion for myself - today it is the most effective tool Protection of the screen of a smartphone or tablet from split or scratch. Films and glass are quite thin in order not to influence the original design, but with almost all a hundred we retain the tactile sensations and sensitivity of the touch screen, allowing us to be comfortably and naturally use the device.
What exactly choose: film or glass? The answer to this question depends on the set of factors, and is especially important here personal, subjective opinion. For example, I liked the glasses more with their oleophobic coating. They are more resistant to scratches, especially if we are talking about acute subjects, and have excellent shockproof properties. By the way, a month after the daily use of the smartphone, I drew attention to barely noticeable scratches on the glass. Why did they appear, I do not know, but I think it is quite natural. Yet I wear my smartphone is not in soft protective case, and just in the pocket of jeans, where it comes into contact with rivets, sometimes with trifles and even with keys. When the scratches become a lot, I just change the protective glass to the new one.
Films externally inferior to windows, but at the same time they have a good resistance to scratches and are somewhat superior to glasses by impact resistance. As you could see in my video, the film with ease withstands even very strong blows, while, thanks to the self-healing property, it retains a neat appearance for a long time.
Choosing between films and glasses is equally important to pay attention to the price. Films are noticeably cheaper, especially when it comes to models big size. For example, the film on iPhone 5 / 5C / 5S will cost 499 rubles. Glass on the same models will cost 699 rubles. If you take Samsung Galaxy Note III, then the film will cost it 599 rubles, while the glass will have to pay 999 rubles. A film for Samsung Galaxy S5 will cost the same amount, but for the glass for him will have to lay out 1,499 rubles. The most expensive will be covered with films and glasses for iPad 2/3/4 and AIR. Film will have to pay 999 rubles, and 1,799 rubles per glass.
In fact, no matter how much films and glass should not be worthwhile, it is clear that they are noticeably cheaper than repair and other original glass. At the same time, you do not need to contact the workshop. Everything can be done yourself.
From year to year mobile phones Everything is done reliable, but despite this, there are still risks to damage it. The most vulnerable place for the phone is considered a display. Therefore, buying another expensive novelty, everyone wonders: how to secure him? To do this, there is a special protective glass and a film that can protect the display from damage. But it is not enough because you need to determine what is better to stick a protective glass or a film? We will try to answer this question further.
Protective film
A film made of a special polymer, which has high strength. The protective film itself has three layers that in place serve as good protection for the display. The first layer provides protection for the phone. The second protects us from radiation that is emitted from the phone. The third is silicone and is designed to be bonded with a display. However, it should be carefully and responsibly refer to the sticking of the film, because it will depend on how long it will last you.
There are three types of films:
1. Glossy;
2. Matte;
3. Mirror.
The protective film is an excellent and cheap option, to protect the screen from scratches. Also, it can easily protect the device from mechanical impact. It is thin, which will not affect when working with the display. One minus it is that she will not be able to protect against shock or fall. Therefore, one hundred percent protection film will not provide the device. However, it is not necessary to immediately refuse her, because it is not necessary that your phone will constantly fall. After all, its main purpose is to protect displays from scratches and ensure its frequency. Consider in more detail the types of films.
Glossy film
This species protective film For a smartphone is the most common.
Advantages:
Well protects the screen from scratches and does not affect the image image on the screen. The glossy film is fine and invisible. Because of which, working with the phone will not be difficult due to lower sensitivity of the display. On the display it will be absolutely invisible.
Disadvantages:
The film in the sun is very glittered, thereby worsening visibility on the display. Therefore, there will be on the phone the brightness of the screen to do to the maximum. Also, fingerprints remain on the film, so it constantly wipe it. Shooting such a film on the tablet, you protect it from scratches, but not from falling.
Consequently, one unsuccessful fall will be able to destroy your tablet. But with a careful attitude, it will serve you good protection.
Matte film
This species is delivered from such a shortage of both glare in the sun, which contributes better work with a device on the street.
Advantages:
On this film does not remain fingerprints, which is quite convenient because there is no need for constant cleaning of the film. Matte protective film is denser than glossy. Due to this, it preserves the display more better from damage. However, the fact that the film is dense and is a slight disadvantage.
Disadvantages:
You have to harm the rather normal. But this deficiency does not attract such attention in a few days, when you get used to the strongest pressing.
Mirror film
This type of protective film is rare. The film itself creates the impression of the mirror, which improves the display of the display. When the display is turned on, then this impression disappears.
Mirror film very well protects the screen from various scratches. Also gives the phone, a rather beautiful appearance.
Despite all the advantages of this film, it has disadvantages:
Prints remain on the film;
The color rendition is worse than ordinary films.
Safety glass
Since the display of the smartphone is needed not only from scratches, but also from falling, it is best to use protective glass. It is most modern option protection. Even if the phone falls, the glass will take a blow to itself and simply break, without harming the display.
This defense has a lot of advantages:
1. Glass is transparent and does not affect the image quality.
2. Because of the small thickness, changes in the sensor are not felt.
3. There is a special coating that promotes smaller screen pollution.
4. When the glass falls, the glass takes, thereby saves the display as an integer.
Protective glass is mainly done under a specific phone. Therefore, you can easily buy glass on iPhone, or another any smartphone.
Sticker protection
Protection It is possible to stick yourself, but it will have to be a little. Before you begin to stick the film, you need to make a number of necessary actions. First you need to independently clean the display with a special tool for screens. This is done so that after sticking, bubbles between the display and the film do not appear. Next, you must carefully take the film and put it on the screen and start glue from the bottom. Glue film should use a plastic card. She needs to stretch over the display to remove the resulting bubbles.
With the sticking of the protective glass, everything is much easier. You just need to clean the display, you can with any soft, clean rag. Next, free the glass from the stickers and attach it to the display. Keep the glass is necessary for the sides, so as not to leave the prints on the adhesive side. When the protective glass is laid in shape, you should spend your hand several times or a clean cloth for better gluing.
Conclusion
Having considered these means of protecting the display, their advantages and disadvantages, you can decide what exactly suits you.
The film is cheaper and will be able to protect your iPhone from scratches. But from more severe damage it will not protect, and it is difficult to stick it.
Protective glass will ensure the safety of the display from drops, and its special layer will reduce the number of fingerprints on it. With good, the glass will serve longer than the film. However, it is more expensive than a protective film.
At the end, they will answer the question: what better paste the film or glass?
It will be better to choose a glass than film. Although it costs it more expensive, but will serve you longer and more reliably will protect the display.
Many buyers of our online store often ask us the question of appropriateness protective coatings On the screen of the mobile device, the differences between glossy and matte protective films, and the advantages of protective glasses from films. In this review, on the example of Luxcase products, we will try to answer all these questions.
Where do scratches come from on mobile device?
Smartphone in modern society is our permanent companion: He is with us at work, at home, rest, gym, etc. This is perhaps the most exploited gadget for each person. In most cases, it accompanies us either in his pocket, or in a handbag, and since it is not alone, then the keys, lighters, metal money and other items are the most common causes of the appearance of scratches on the display and on the smartphone itself.
"To be or not to be"
There is an opinion that Gorilla Glass glass is a panacea from scratches on the display. From Wiki materials " Gorilla Glass. - glass of increased resistance to scratches and shocks used in the displays of mobile devices. According to the manufacturer, Corning ( english), Gorilla Glass is three times stronger than chemically treated sodium-calcium glass. Such properties are achieved by chemical processing (ion exchange), during which sodium ions in the material are replaced by potassium ions. "
However, there are two weighty but:
1. Many of the readers are ready to check the metal key quality of your display glass?
2. The display of the display, as a rule, changes with the display assembly. Few repairs are taken to replace separately glass on the smartphone.
Therefore, the cost of the screen tread (film, glass) is many times less than the cost of replacing the display (display glass).
The main types of screen protectors
We give the main types of screen protectors that can be found on sale:
- 1. Protective film - is a solid polymer, for example, polymer "polyethylene terephthalate" consists of four layers. Protective films are divided into glossy (transparent) and matte. Matte protective films have a rough surface, which eliminates the appearance of prints on the film, but worsen the quality of the display image.
- 2. Protective glasses - chemically and thermally treated sodium-calcium glass with applying adhesive layer and alpine-eye coating (nanometer combine film, repelling the sensory screensman).
- 3.Good compositions - for example "Nano Liquid Glass".
Protective film
This is perhaps the most budget version of the display of your smartphone. Protective films from LuxCase are made of high-quality Japanese material, which, unlike Chinese analogues, has increased strength and anti-reflective coating.
Sticker film
Each LuxCase film package has a visual instruction for the correct film sticker. With such an instruction, the film sticker is 5 minutes. If you split the process to steps, then 4 main stages can be distinguished:
1. Ceremony screen
2. Film centered
3. Changing film
4. Removal of protective stickers
5. Opportunity from use :)
I would like to note one pleasant feature in the configuration of LuxCase films is stickers to center the film and a special applicator. The applicator is a kind of Savior of the film, especially in cases where in the process of stickers we noticed the dust on the display and have already removed the protective layer of the adhesive side of the film. It is enough for us to simply remove the protective film from the applicator and remove the dust.
If you have after reading the instructions yet, there were still questions on the sticker, then you can familiarize yourself with the video instructions on the company's website www.luxcase.ru
Safety glass
If you want to maximize the display of your smartphone not only from scratches, but also from shocks, you will help the protective glass from Luxcase. Luxcase protective glasses are made of tempered glass hardness more than 8H on the Moos scale, i.e. In fact, protective glass can be scratched only with a diamond earring. Unlike Chinese analogues, Luxcase protective glasses have an improved oleophobic coating and a richer kit.
The thickness of the sample presented is only 0.33 mm in our opinion thickness from 0.3 to 0.4 mm is optimal because With such thicknesses, the "Booking" of the screen is saved.
Also luxcase protective glasses have a rounded edge 2.5D
Installation of glass is easier than films
In fact, the installation of protective glass is simpler than the protective film due to the elasticity of the glass itself. Those. When mounting the protective glass, there are practically no air bubbles between the protective glass and the display. Also, the protective glass can be transferred if you were wrongly shiny.
Conclusion
In our opinion, the use of protective glass is the most rational optionbecause It has shockproof properties and can protect the display of your smartphone from shocks. It can also be noted that the protective glass does not lose its properties until you disarm it.
How much is a new display of smartphone? On average, from 3 thousand rubles. How much does the protective glass cost? Luxcase protective glasses are worth 500 rubles. Savings are obvious.
PS. Online store DIGISHOP thanks LuxCase, represented by Selivanova Olga, for the presented product samples for the review.
