Scratches in the car's cabin arise even from the most leaning and neat owner. At first, small damage to the plastic is practically indistinguishable, but later a whitish flare appears, which significantly spoils the appearance of the cabin.
Methods for removing scratches using motor history
The best means to eliminate deep scratches are plastic restorers that can be safely bought in auto shops. For example, DOCTOR WAX is perfect. It masks the shallow damage on plastic, leather and vinyl upholsters, at the same time cleaning and updating them. The gel penetrates the microcracks and displaces pollution.
The procedure for eliminating scratches with its help looks like this: the composition is applied to the damaged surface, after it penetrates into the crack and fill it, give time to dry the mass (it is indicated on the package or tube). After that, proceed to the grinding of plastic with the help of special napkins, which are often sold in a set with motor protection.
In order for the repaired site, it was not highlighted and had one structure with the surface of the plastic, the gel plasticizer is used. It is not imposed on the place that has been processed, but on the intact part. To frozen the gel on its surface, the cast of plastic pattern is formed. This "template" should be imposed on the restored area during its drying and slightly pressed into the scratch aggregate. In this way, the imprint will be obtained and the required "texture" of plastic is preserved.
Another means to update the interior - polyroli to remove scratches. They are different: with abrasive and coloring substances. For example, there are regenerating poly rays for dark and light, pearl and silver plastics. Any of them masks damage, makes the surface smooth and shiny. Super-thin abrasive polyters are designed for materials requiring the most delicate effects. If the damage is deep, use tinting pencils to seal scratches.
"People's" means of removal scratches in the cabin
Car enthusiasts argue that small scratches are easily removed by lighter. To do this, carefully draw a flame over the surface of the damage. From the effects of fire scratch gradually melted and is delayed. In this procedure, it is important to fulfill two rules: do not overeat the fire over the plastic and do not touch the place processed for some time. After plastic cools, you need to remove the soot using a paper napkin or a cotton disk.
Random scratches on plastic in the car cabin appear regularly. How at home independently remove strips on plastic? The depth of damage is easily determined by the naked eye or inspection with the help of magnifying glass.
You can cope with shallow damage using:
- polyrolla
- antitrapine
- polishing pastes
- scratch pencils
- work specialist hundred
- holded means (hair dryer, lighter).
Tip: Inspection scratches spend during the day on the street, or indoors with good lighting.
The main property of plastic is softening under the influence of high temperature. The surface under repair must be flushed, dry. Gradually heat her hair dryer. Small dashes under the action of heat smoothed, become invisible. Deep - do not disappear, but slightly smoothed. With a hair dryer, the removal of scratches is recommended on a smooth plastic car cabin. On the "Puparchy" distorted the whole texture, and the type of plastic will only worsen.
Removal of shallow grunges on plastic lighter
The displex polishing tool is designed to mask and remove scratches on the auto-boards screen. Pasta copes with small stripes on the laptop screen. Displex in a red tube perfectly masks the emerging scratches on plastic in the cabin car. When polishing the displex® tool, the surface is amenable to paste microparticles.
Plastic particles fall into the scratch cavity and climb it with themselves. As a result, the bands are not recorded by our vision, the paste removes the optical curvatures on the refraction borders.
Application: Displex is applied circular movements With the help of cotton fabric, cotton tampon (disk), baby diaper. The procedure takes 2 minutes. If scratch is visible, repeat the wiping movement. The total amount of time spent will be 20-40 minutes. Depends on the magnitude and depth of damage.
Deep defects are fixed not easy, in several stages.
Removal of deep scratches on plastic in the car
It will take a small piece of plastics similar to the repaired area. Take from the inner surface of plastic (from partitions). By this we do not harm the designs of parts.
Plastic dissolve in dichloroethane or in another solvent (by type of plastic). The resulting solution gently apply to the scratch. So far, the repair surface has not frozen, it can be given to the texture of the plastic and any shape.
Polishing of plastic does not lead to a complete disappearance of scratches, only refreshes its appearance. It is completely inappropriate on a rough, matte surface. Thresholds and door holdings are not subject to polishing and repair. Details are replaced with new ones.
Removal of large scratches:
- on the damaged place to apply the composition that fills the scratch. It is selected by the type and properties of plastic;
- carefully sanding filled damage;
- after recovery, apply a factory pattern on the plastic cabin of the car. To do this, part of the intact surface is covered with a gel plasticizer. After soaring, remove the gel, the resulting drawing is transferred to the restored place;
- perform a tinting and staining.
Tip: Removal scratches on plastic in the car's cabin is a rather complicated process. We are not sure of your skills and forces, - use the sales of scratches. Such work is performed on many hundred and car wash.
When operating vehicle, scratches appear on plastics in the car's cabin. Defects spoil View dashboardAnd a large number of such damage leads to the appearance of microcracks and the destruction of plastic. Knowing how to remove scratches on plastic in the car's cabin, the driver returns to the details of the initial species, avoids more serious repairs and replacing damaged elements.
Scratches on the Torpeda plastic - frequent phenomenon. Various objects, or even opening and closing doors, can cause their appearance. This is due to the fact that plastic surfaces do not have shockproof coating, and the slightest mechanical impact leads to flaw. Small defects, deep scratches on the instrument panel spoil the view of the auto interior as a whole. but such damage can be corrected without dismantling plastic elements.
Straight sun rays lead to the burnout of the paint on the cabin elements of the car. To restore such a detail, you will need to overhaul the element.
How to remove scratches on plastic in the car
To remove scratches from plastic in the car, use several ways:
- Small defects are eliminated by thermal exposure. This uses a hairdryer or lighter.
- Small damage is removed by special regenerating napkins and towels.
- Deep defects are painted by car wax pencils.
- With glossy surfaces, scratches are removed by polyrolles and abrasive gels.
- Cracks, chips and deep damage paint coating torpedoes eliminate with overhaul Details.
Repair of corrugated surfaces is not possible. They are not amenable to polishing and heat treatment. When wearing such elements, they are replaced with new ones.
Restoring pencils and napkins
One of the most simple methods Restoration of the type of damaged part, it is the use of special napkins, microfiber towels and a pencil to remove scratches from plastic. However, the use of these funds that eliminate defects has a number of nuances:
- Napkins and towels are allowed to get rid of small scratches of the plastic surface of the car dealership.
- Deep chips and scratches can be lost special pencil. These devices are sold in auto shops. The advantage of such a means consider its effectiveness. The substance fills in defects, gives the surface of the primordial appearance. However, only the original pencil can cope with the problem can cope with the problem. Its cost is high, and Chinese cheap counterparts, if the car is scattered, there can be little to help.
- When painting, pick up the closest color of the pencil to the shade of the dashboard. Otherwise, after restoration, black traces remain on the surface, spoiling the type of detail.
Using a fane
Plastic damage can be eliminated with their own hands with a hair dryer. Previously before heating, the processed area is cleaned of contaminants and degrease. After, include hair dryer maximum power And very closely monitors the reaction of plastic for heating. When exposed to high temperatures, smoothing the defects, the item acquires a primordial appearance.
If there is no reaction to heating with a hairdryer, then you need to increase the power of the device, and bring it closer to the surface being processed. Deep damage cannot be eliminated in this way. Excessive heating will lead to the deformation of the plastic element, and worsen the appearance of the detail.
Polyrols and gels
After eliminating scratches on plastic, it is necessary to refill the item. This is important when repairing glossy salon elements. The means will return the surfaces of the primordial appearance. For polishing, it is recommended to use an abrasive skirt or grinding machine. Using an electric tool cannot be eliminated by defects on maximum turns Grinding circle. Plastic is heated and deformed, which will lead to expensive repair.
Also, special attention should be paid to the means used when restoring the damaged area. To protect the material from deformation or destruction, use a special abrasive paste and polyrol for plastic.
The elimination of defects is performed according to the following algorithm: before polishing the surface is washed, dried and degreased. Next cause a small amount of funds, and before the appearance of the glossy shine polished the part.
Using polishing, small scratches with a glossy surface are removed.
Removal of damage lighter
With open fire, remove scratches from plastic. For this, the lighter is made to the defect, and is carried out with a flame over the entire area of \u200b\u200bdamage. After the surface treated in this way completely cools, moistened in the alcohol with a tampon is removed soot. If everything is done correctly, then after such a procedure, plastic is restored.
When using a lighter should be careful. Otherwise, the open fire will cause damage to the trim and fire of the vehicle.
Overhaul plastic
It is not always possible to repair plastic in the cabin of the machine simple ways. Squares, cracks, sections of burnt paint - all this requires the overhaul of plastic elements of the dashboard of the car. Recovery is performed as follows:
- A damaged item is dismantled.
- Carefully cleaned from dirt, degreases and polished.
- Cracks and chips are embarrassed by primer.
- The surface is grinning.
- Apply paint, give an element to dry.
- Covered several layers of varnish.
- Polish before the appearance of glossy glitter.
How to remove scratches from gloss
When making many elements of the cabin, transparent plastic is used. The disadvantage of such a material is the rapid appearance of defects: small scratches And chip, after several years of operation of the machine, literally cover the entire surface of the salon element. Removal of scratches of plastic car salon has a number of nuances:
- Before recovering, you need to hold a wet cleaning of the machine. It is necessary to monitor the lack of dust. Otherwise, when polishing on the surface, new scratches may appear.
- The processed area will need to be carefully flushed and degreased.
- To get rid of scratches, use a grinding machine.
- To polish a damaged place, it is recommended to use the means that are designed for plastic grinding. These are special polishes and abrasive pastes. It is important to correctly calculate the amount of substance applied.
Abrasive pastes, gels and polyters, which are designed to grind the car body, can not be used when restoring the cabin. They will spoil the recoverable item.
Numerous defects, scratches, chips and cracks spoil the type of torpedoes of the car. Damage to this plan is easy to eliminate yourself. In order for the repair process to be effective, and did not lead to the replacement of the part, consider the nuances of the restoration of plastic interior elements.
As it happens, when the recently purchased machine appears scratches and wrappers on plastic interior elements. A car is only a few months, and because of the pair-triple scratches in a prominent place, it seems that the car has taught ten years old. But to fall into the despondency or go to the store to order a new plastic, it is not necessary to hurry, there is a pair of simple methods that allow you to remove or disguise the results of non-accurant operation.
Of course, not everyone is worried about the scratched plastic in the cabin, and indeed that it is going on, the main thing for them is to be driving the car. But for many, especially those who bought new car, such things are swollen strongly. The easiest option is to drive the car in the hands of professional masters. They either renovate, or replace damaged plastic elements. However, this option is the most expensive. But for aesthets, such a victim is justified, especially if the plastic was originally with a pattern or complex texture, riflation, then it would not be possible to restore the initial appearance.
How to disguise scratches
For corrugated plastic elements there is one way to independently restore the appearance - the use of a special masking pencil. But this is if the scratches are small. Pencil - sounds not as the tool actually looks like. In essence, this is a container with special fluid. The difficulty of using a pencil is accurate selection Colors, it is difficult to guess and get into the tone. This liquid fills the scratch, frozen in it, and merges with plastic background. Everything, scratching in the eyes does not rush.
Masking scratches on plastic hairdryer
Be sure to be rinsed before starting the procedure, the place that is scheduled to be restored.
If plastic is smooth, and scratching shallow, then you can use to remove the hair dryer. It will be suitable for a powerful household apparatus, but it is better, of course, to deal with the industrial model. The process of restoration using a hair dryer is quite simple, the mechanics of this action lies the property of plastic when heated soften and, like water, delay small irregularities. Here the main thing is not too much to zeal in heating so that the plastic does not accidentally lose. It is better to have a magnifying glass through which to carefully observe how plastic softens.
Removal scratches with a lighter
If you are extremely economical, and self-confidence excavates, you can turn this operation using a conventional lighter. The principle is the same, heating the plastic, it softens and delays scratches. But it is necessary to take into account the specifics of the method, since the open flame is somewhat differently affecting the surface. It is better to first take off on similar plastic pieces for funny confidence. Just in case, move the fire extinguisher from the trunk, so that the tragedy does not happen.
Damage to the paintwork of the machine becomes an unpleasant surprise for any car owner, but if defects appeared on plastic parts in the car cabin, it becomes even a big blow. Appearance The interior of the car can be spoiled both small scratches and deep chips and damage from direct sunlight.
With the appearance of such unpleasant "surprises", it is not necessary to seek help at the auto show, as today there are funds such as: polyrolol for plastic in the car and special pencils to remove small chips. Consider the principle of operation of specialized liquids, as well as several useful "know-how", which will allow you to quickly and cheaply get rid of defects on your own.
Removal of scratches on a phenom
Small scratches, or as they are usually called a "web" easily removed by the usual household hair dryer. Under the heating surface becomes more plastic, and shallow damage is completely "tightened" or become almost invisible.
The process of deleting defects in this way is as follows:
- Clean the torpedo with any detergent And wait for it to complete drying. If the dirt has left on the surface, then it can "fuse" in plastic in the process of thermal processing.
- Turn the hair dryer to the lowest power and direct it to the "web".
- Wait for the reaction - scratches must delay. If this did not happen, increase the power of the hair dryer and repeat the procedure.
Important! Strongly heat the plastic panels should not be, as this will lead to the deformation of the surface.
Removal scratching lighter
With the help of open fire, you can also effectively and quickly get rid of small chips. To do this, take a lighter and perform a few simple steps:
- Spend a lighter along scratch several times. Do not delay the fire in one place so as not to melt plastic.
- Wait until the treated surface is cooled.
- Clean the plastic panel from the resulting soot.
Tip! Before using open fire, it is recommended to stretch on a piece of plastic.
If you are afraid to produce such thermal processing, you can use more secure means.
Polishing plastic
For repairing more serious damage and rapid surface recovery, it is recommended to use special polyroli, which are abrasive pastes. When choosing a means, it is worth a preference to the composition that is suitable for a specific material (in our case we are talking about polyterol for plastic).
For surface treatment, you can use a specialized grinding machine (the rotation speed of the disk must be minimal) or a clean cotton rag or a sponge.
To remove defects with abrasive composition, follow these steps:
- Work is better to produce in a dark cool place (the paste for polishing will dry quickly).
- Clean the surface and apply an abrasive composition with a sponge.
- Wait about 5 minutes until the paste enaches the reaction with plastic.
- When the tool brightens and turn into a raid, polish the surface until the paste disappears.
- Rinse the plastic panel and wipe it with a dry clean rag.
If the scratches fails to be removed, they can be masked.
Hide stains specialized pencil
If defects are minor, then you can use a special pencil. When purchasing it, you need to pick up the color as accurately as possible. If the shade is at least a little different, then from scratch you, of course, get rid of, but instead, stripes will appear on the surface of the torpedoes.
The principle of operation of such a pencil is very simple - inside a small vial contains a rather thick coloring composition, which fills the crack and dry out, thereby fully aligning the surface.
To use the marker, it is enough to wipe the surface from dirt dust and, pressing a pencil, to squeeze the "smear" into the recess. Excess the composition It is recommended to remove and polish the surface.
Despite the simplicity of this method, it is worth considering a rather high cost of a pencil. However, it can be reused.
If damage is quite deep, there are still several ways to repair the surface.
Alternative scratch removal methods
It is worth considering not the cheapest but pretty effective means For recovery damaged plastic surface Car torpedoes:
- Painting. In this case, you will need a small paint vial, usually they are sold along with a tassel. After processing, it is best to additionally cover the place of Skola varnish.
- Vinyl. Special vinyl film is tightly tensioned on the damaged part and is processed by a hairdryer. Thanks to this method, quite large chips can be completely hidden, but you will have to work out.
- Leather. This method relates rather to restyling the car's cabin, as it implies a panels to the panels. However, if you can work with the skin, you can only integrate individual pieces. But it is worth considering that leather elements will look pretty ridiculous in a velor or rag salon.
Also, some covered with carbon scratches, however, such a means will most likely cost several times more than a new item. Therefore, apply carbon there is no point.
