14.09.2016

How to remove scratch on the plastic of the car?

Even small damage to the decoration elements give the interior of a sloppy, neglected view. This is especially true for the front panel, as it is constantly in front of his eyes.

In many cases, it is possible to eliminate scratches on the plastic of the car, using special techniques and recovery materials.

Types of damage to plastic surfaces

The most common defect - small scratches On the plastic cabin car. They are usually formed in a set, as a result of which a peculiar "web" is formed on the surface. It worsens appearance finishes, however damage this type Easy to disguise or completely eliminate with the help of specially intended means. This repair can be made independently, this requires a minimum of time.

Deep downward defects usually happen due to the inaccurability of passengers or the driver, as well as due to annoying accidents, children's pranks, as a result of animal transportation (traces of teeth and claws), etc. In this case, the elimination of damage is carried out using more complex techniques.

Another common defect is the deformation or fading of polymer surfaces under the influence of sunlight. In combination with roughness and other mechanical damage It extremely negatively affects the appearance of the interior.

Elimination scratches on plastic with a hair dryer

The method is well suited to combat small and "web-shaped" damage. For this, it is not necessary to have a powerful construction hairdryer - quite enough of the usual household appliance.

In this case, eliminate damage is easy. The principle is to heat the relevant sections: at the same time, defects are either completely "delayed" by themselves, or much decreased and become practically imperceptible.

Before removing scratches from the plastic of the car, you should thoroughly wash the surface to be treated with the help of efficient detergents. This is necessary to remove dirt from damaged places (otherwise it will prevent the tightening). After drying the surface, you need to turn on the hairdryer to a small power and direct the stream of heated air to the processed area.

In the process of work, follow the condition of the plastic surface. In the absence of due effect, increase the power of the instrument and reduce the distance between it and the panel.

Liquidation of damage by lighter

This method is largely similar to the use of a hair dryer. With the difference that in this case the impact on defects is carried out with an open fire. To get rid of scratches on the plastic of the car, bring the lighter to the corresponding location and spend the flames along the damaged fragment several times.

After exposure to the flame on the plastic surface, it is impossible to touch it until it is completely cooled. To remove soot, you can use the cotton or soft rag moistened in alcohol.

Polishing

This is one of the simple and safest methods for restoring plastic surfaces. It is based on the use of special polyrolians. It should be remembered that the use of funds intended for processing the paintwork, in this case, is unacceptable - due to the specific structure, they can damage the supple and soft polymer surface. In addition, the method cannot be used for corrugated materials.

To remove scratches on the plastic of the car, it can be polished both manually and with special grinding equipment. However, the speed of rotation of the spindle in the processing of polymer surfaces should be minimal. In the general case, the liquidation algorithm is as follows:

• careful washing of surfaces that are planned to polish. It is important to free them from the solar and dirt;
• drying and subsequent cooling of surfaces;
• applying abrasive paste (it is convenient to do with a small piece of foam rubber). After that, it must be left for about five minutes to gain working condition;
• polishing the surface to the complete disappearance of the applied means.

The process is completed with the removal of dust formed during the processing process, and a thorough sink of restored fragments.

Clear scratches on plastic car can be using a special pencil. This is one of the most simple methods. It can be realized independently. The only drawback is that markers and other regenerative tools of this type have a relatively high price. On the other hand, one pencil is enough for repeated use.

It is a special bottle, inside of which there is a special composition to eliminate scratches on plastic car salon. When applied this means The recess is filled with a damaged fragment, as a result of which the defect disappears.

An important condition for successful repair is right choice Colors and shades of reducing composition.

Overhaul of plastic surfaces

This method is the most difficult and time-consuming, since it consists of several stages and provides for preliminary dismantling of damaged finishing elements.

After removing the panel, its cleaning and washing using the appropriate compositions are carried out. Next, grinding is performed (provided that the surface is not a corrugated).

The next step in the struggle of scratches on the plastic of the car is to apply primer. When choosing the composition, pay attention to the fact that it does not enter into a reaction with polymer materials. Paint is applied to the primed and dried surface, after which you can cover the panel with a special varnish.

Outside state plastic details In the cabin, worries many drivers no less than the serviceability of the engine and the rest of the vehicle. This is especially true of the front panel, as it is constantly in front of her eyes. So the owners of the car will useful information How to effectively remove scratches from plastic and avoid changing the interior elements. But you must first classify damage to determine the restoration method.

Types of damage to plastic

The most common damage to the plastic in the car's cabin is small scratches. Such defects are usually available in a plural, forming a whole web, which is pretty spoils the appearance of the interior. Such scratches are very easy to disguise or remove completely with special means. This repair will cost inexpensively and takes a little time.

More serious troubles are waiting for the owner of the car, which will have to repair deep scratches on the plastic of the cabin. Many of these defects are impossible to hide simple methods, Therefore, you have to use the cardinal methods that are described below. With their help, even the deepest scratches on the plastic of the cabin can be removed and avoiding the most expensive replacement of the entire part entire detail.

Another type of damage to the plastic of the car's salon is the result of the impact of direct sunlight. After a long effect of ultraviolet radiation, the torpedo surface becomes matte and loses its color, and in combination with scratches, such a defect degrades the appearance of the cabin. To correct the situation, you may need to overhaul surfaces.

It should be paid to the fact that the removal of scratches on the parts of the cabin is not always a simple task. If the surface of the plastic has a corrugated structure, it will not be possible to cope with defects with defects. In such cases, almost any scratches require major repairs. In a different way, things are going with smooth surfaces, since it is much easier to remove scratches from such material and faster.

Main ways to remove scratches

Depending on the type of surface and complexity of scratches, the repair can be carried out by the following common methods:

• removal of scratches with a hair dryer;
• smoothing the surface of the source of open fire;
• disking defects with special pencils;
• overhaul of plastic, which includes stripping, priming, painting and varnishing.

For corrugated surfaces, only the last two methods can be used, since the repair by the rest of the methods can even more worsen the appearance of plastic. Otherwise, it is possible to use any of the above methods, it all depends on your effort and type of scratches on the elements of the cabin. Further more detailed about each of the above methods.

Eliminate scratches with a hairdryer

Remove small scratches or web from them with the most ordinary hairdryer. In this case, not only the building tool, but also the household, as its power is enough to remove shallow scratches. The principle of such restoration is very simple - when heated, small defects are delayed by themselves and become either at all imperceptible or significantly decrease in the amount.

To repair the car torpedoes in this way, you need to pre-wash the surface using detergents. It will save scratches from the dirt that contributes to the tightening when heated. When the panel is dry, you must turn on the hair dryer to small power And send a hot air flow to the place where you need to remove scratches.

During heating, it should be very closely monitoring the reaction of plastic, and if there is no effect, the power of the hair dryer is gradually added and the distance between the tool and the panel is reduced.

You should not instruct a hairdryer at one point, on the contrary, you need to evenly distribute hot air to avoid excessive heating of the part. If everything is done correctly, the damage will delay right in front of the eyes. Or at least it becomes noticeably less, which will facilitate further polishing restoration. After warming up, it is necessary to wait until the part of the cabin will be completely cooled, and before that it is impossible to touch it.

Hide damage lighter

Similar to the previous repair method with an open fire. To remove defects in this way, you need to bring a lighter for a very short time to the plastic and carry out the flames along the scratch several times. It is necessary to act extremely carefully, it is advisable to practice in the execution of such a repair on some unnecessary piece of plastic with the same structure.

After exposure to fire on the cluster of scratches, it is necessary to wait for a while until the plastic cools. Up to this point, it is categorically forbidden to touch it. South, which left the flame, can be removed with a cotton disk dipped in alcohol. If the first time defect does not disappear, it is better not to risk and try another method for removing scratches.

Repair of plastic polishing

One of the most simple and secure restoration methods is polished using a special abrasive paste for plastic. You should not use the tools that are intended for paintwork. Their structure can harm soft and militant plastic.

You can polish both manually and using a grinding machine, while the spindle speed should be set to a minimum value.

Excessive high revs Grinding circle can melt plastic and bring it into a deplorable state. It should be noted that plastic in the cabin is not so much, so safe manual polishing It does not take much time.

Deleting defects in this method as follows:

• The surface of the plastic element is thoroughly washed away using detergents. Special attention is paid to those places that have evaporated dirt particles.
• After that, the surface is dried and cooled in a dark room.
• When all the conditions are created, an abrasive paste is applied to the surface of the panel. You need to do this manually with the help of a piece of foam. After applying the pasta, she gives some time to trigger.
• It is necessary to start polishing after the remedy turned into a light color. It is usually enough to wait for about five minutes.

The entire surface is methodically polished until the applied paste is completely disappeared, while periodically it is necessary to remove dust, which was formed from dried polishing paste. At the end of polishing, the surface is thoroughly cleaned and washes, and it should be proceedable and not to create new scratches.

Disguise scratches with a special pencil

The easiest way to get rid of defects on plastic parts of the cabin is to disguise them with a special pencil. This method cannot be called the cheapest, as really high-quality markers to remove scratches are not suiced. Although the same pencil, bought one day, can be used several times, which makes such an acquisition rather favorable in perspective.

By itself, such a pencil is a bottle in which there is a special composition. If you apply it to a damaged place, then the recess in the form of scratches will be filled and thus disappear from the view.

Of great importance, when choosing such a pencil, the selection of the color, which must match the shade of the panel.

Everything is much simpler, when the panel of standard colors is black or gray, because for them it is much easier to choose a restoring marker. Repair is carried out very simply - damaged places are thoroughly cleaned from dirt and dust. The sharp end of the marker is carried out by the scratching of scratches, and when the applied composition freezes, its excess can be removed by polishing, which will additionally hide defects, having threw them with neighboring sites.

Overhaul plastic

The most complex type of plastic repair is painting. Despite the complexity and high cost of this method, there are all guarantees that you can achieve complete deletion of all existing defects. It is possible to change the color of the panel, create new interiorwhich more corresponds to the tastes of the owner of the car.

For such a repair, you will have to extract the part from the cabin, which is troublesome, but only so you can avoid contaminants of windows and lounges. The part is extracted from the machine in accordance with the manufacturer's recommendations, which it indicated in the instruction manual. After dismantling, the recoverable element is brushed from dirt and is carefully clean with the use of detergent for plastic.

Next follows surface grinding. If the item has a corrugated structure, then nothing will be grinding. However, today, most elements of the cabin are initially created smooth, which greatly simplifies the care of their condition, and makes them more realistic. The surface is aligned or manually, or using the machine, and as an abrasive you can take the smallest sandpaper.

After that, the surface is covered with a brine from the can, it is necessary to choose a soil that does not react with plastic. After applying two layers, the surface is matched with small abrasive to the perfectly smooth state. If there are deep defects on the panel, which do not overlap the ground, then they need to be embedded by putty.

Next, the primed surface is painted into the appropriate color and is optionally covered with a layer of varnish. In some cases, the coating of the varnish does not apply - this applies to those elements of the cabin, which, due to their form, can create glare from sunlight and interfere with driving a car. The same can be said about cases when matte paint is selected.

Scratched a bicycle wing today. Puzzled as a question how to remove scratches from plastic. The same tasks are often standing in front of the owner of the car, the plastic parts of which are scratched from borders, stones, maiden heels, various things that you have to upload in the trunk and so on. Search results offer to your attention.

The main methods for removing scratches from plastic:

Surfaces having a complex decorative relief, ripples, drawings - using heating is not recommended, it is not recommended - you can only aggravate the problem. With polishing of such surfaces, it is also worth being as accurate as possible. I met recommendations that polishing such surfaces are contraindicated in principle. However, my personal experience of polishing the automotive torpedo speaks about the opposite. Next - more about each method.

We clean the scratch on the phenom

This method is suitable for shallow scratches or shallow "Cellites" on smooth surface. You can use the usual household or construction hairdryer with no more than 500 W. When the surface is heated with a hairdryer, small scratches are tightened by themselves.

Before using the hair dryer, the treated surface must be rinsed well, remove the remains of any contamination from scratches - so they will be able to delay, dry the item. Then turn on the hairdryer and direct hot air to the processed place, evenly distributing the stream of hot air to avoid point heating of the surface. In the process of heating, it should be estimated whether the effect of this processing is. And if it is not either insignificant, it is necessary to reduce the distance between the hairdryer and the heated surface and, possibly, increase the power of the hair dryer. It should be processed in 2 - 3 approaches, giving completely cool the heated surface.

With visual inspection you can evaluate how effective this method is - small scratches disappear simply before our eyes, and deeper damage decrease in size!

Hide irregularities open fire

The principle described in the previous method is used and when healing scratches on plastic with an open fire, for example, a conventional lighter. We take a lighter, we produce a fire and spend it along scratching times 2 -3 holding a flame at a distance of about 5 mm from the treated surface. It is necessary to act here extremely careful not to cut the surface and do not arrange a small fire in the place of the application forces :)

After processing, it is necessary to fully cool the plastic, and the possible soot from the flame lighters can be removed with a cotton swab, moistened in White-Spirit or a conventional alcohol-containing solution, for example, cologne or toilet water.

This processing method is better to use once, because it is - or it will help immediately or will not help at all. It is not necessary to persist - you can make a problem more serious.

How to hide plastic defects polished

Here you need a means for polishing plastic, grinding machine or an ordinary cloth. The means for polishing the paint coating is not suitable - you can spoil the plastic surface. Here you need to use abrasive paste, which can be found in any store of auto chemicals.

The sequence of action is:

It is necessary to polish with energetic movements to the complete disappearance of the paste, periodically removing the dust, which will appear as a result of exfoliation of dried polishing paste. Then the processed surface should be carefully flushed.

Scratch processing pencil

Perhaps this is the easiest way - you only need to buy a special Kararanadash. The only difficulty here is to guess the color. However, the most common plastic surfaces of gray and black colors. To choose for them the color of such a pencil will not be difficult. When buying a pencil in the store of auto chemicals, it is not worth saving on it. A cheap option, as a rule, does not last long.

In fact, the pencil is a brainter with a special service, which when applied to a scratch, fills it with it and, hung, hides the defect.

Application is simple: we clean the surface from dirt, apply a pencil composition into a scratch and then polish a little to hide small defects.

Overhaul plastic

This option is the most expensive, but also exactly giving best result: In fact, the surface surface will be recreated again.

In the case of a car, the part that we will restore will have to be pre-removed from the car in accordance with the instructions. Instructions, if you do not have it, as a rule, you can find on the Internet by typing, for example: "How to remove the glove box in Renault Megane"(If we repair this item in the car of this brand). Accordingly, the name of the part and the car brand is substituted.

The detail is again mine and dry, as in the above-described methods of removal of scratches

After that, the surface is grinding. Exception is a corrugated surface. It will not work to grind. You can grind manually or using grinding. As an abrasive coating, we take trained sandpaper with minimal grainy.

Then the surface is ground from the canopy. The primer is chosen so that it does not enter the reaction with the plastic surface. The primer is applied in two layers. Then the surface is processed by abrasive to a completely smooth state. Deep defects that do not hide the primer, smear putty.

Then the surface can be painted in the desired color and, if the surface was originally glossy, covered with varnish. After that, in accordance with the instructions, you carefully install the item back.

Own car is perceived by most drivers as small childBeyond which you need to constantly monitor - what if it will hurt, scratched or sick? Fortunately, such close attention is not required: it is not possible to hit independently, and spontaneous diseases are rare enough. It remains only an element of chance, from which no one is insured.

A very common random problem is the appearance of scratches on plastic parts of the car. The usual plastic does not relate to the category of solid materials, so careless handling of keys, drops different items in the cabin, even the input and output from the salon - all these actions can lead to the occurrence of scratches on the surface of the plastic.

For many drivers, this situation is extremely unpleasant, because the smallest damage is still noticeable and calling the eyes, constantly being in sight. If we are talking about a serious and deep scratch, which ran across the entire front panel - the gloomy view of the owner of the car will complement this picture. So that this is not happening, this article will answer the question of how to remove scratches on the plastic in the car.

Types of damage to plastic

First of all, it is worth understanding which damage to plastic can be - perhaps not everything is so dangerous as it seems at first glance. Damage to plastic parts in the cabin can be classified as follows:

1. Small scratches. Such damage is one of the most common and cunning. The apparent minor problem may be much more serious. Yes, a couple of small scratches are a trifle, but when all the details are covered with such scratches, the interior is pretty pretty. The good news is the fact that eliminating shallow scratches can be cheap and reliable, even if they cover a significant area of \u200b\u200bthe salon plastic.
2. Deep scratches. It is easy to eliminate a deep scratch will not be released, so you have to use more radical ways (we will go further about them). However, dealing with such a type of damage to plastic, it is not necessary to despair - deep scratches can be repaired, and you will not need to change the part for their elimination to eliminate them.
3. Damage from sun rays. This kind of damage is especially unpleasant for several reasons: first, it is not always possible to protect against it, and secondly, ultraviolet radiation makes the plastic elements burn out, and work for their recovery will require serious effort.

Situations are very often occurring, when different damage adjacent to each other, creating a very impartial picture.

If there are a large number of scratches and faded plots, it is worth thinking about overhaul Plastic detail. In addition, it is worth paying attention also at such a moment: the corrugated surface is practically not amenable to rapid repairs, and in the case of such plastic, the output one - full repair Damaged surface.

Basic solutions of scratches

There are several ways to remove scratches with plastic interior elements. The most common of them are:

1. Elimination of scratches with a hair dryer.
2. Smoothing the damaged area by open fire.
3. Elimination of scratches with polishing.
4. Masking damage with special means.
5. Overhaul of plastic part.

Every method is worth talking more.

Removal scratching heating

We make removal scratches on plastic in the car's cabin! You can remove small scratches using a conventional hair dryer.

The meaning of this repair is that: the heating of the plastic part leads to self-defining small defects, as a result of which they become almost invisible.

The process of eliminating scratches with a hairdryer is as follows:

• first, the damaged surface is thoroughly washed washing agents;
• after drying the panel, a working hairdryer is sent to it included on the minimum power;
• when the plastic is heated, you need to monitor its reaction (if scratches are not delayed, then you need to increase the power of the hair dryer or bring it to the panel).

If everything was done correctly, then small scratches will disappear quickly enough, and this can be determined visually.

Elimination of scratches open fire

Liquidation of plastic scratches in the cabin can also be used with open fire (most often used the usual lighter). The process is simple, but requires some skill:

• to eliminate scratches along it, open fire is thrown several times;
• scratches will gradually be delayed, but before cooling the surface should not touch the plastic with their hands in trying to grope damage;
• after exposure to fire on the plastic, a bit of soot will appear, which is subsequently removed by a cotton swab in alcohol.

This method allows you to quickly remove small plastic defects, but it has one nuance: if it did not work out from the first time, it is not necessary to repeat the attempt - a long exposure to open fire on the panel can lead to its deformation and complete loss of a good kind.

Polishing plastic details

If you wish to restore the plastic part without risk of damage, it is possible to polish. For this, a special abrasive paste is used, which allows you to painlessly treat the plastic part. The process of removing scratches as this method looks like this:

• first, the damaged surface is wellhed with detergents and dried;
• after that, an abrasive paste is applied to the recoverable area, after which the polishing of plastic is performed manually or with a grinding machine.

For polishing, it is impossible to use the means that are intended for paint and varnish coatings. In addition, in no case can not polish the plastic surface on large turns Grinding machine - Detail can simply melt.

Masking scratches with special pencils

One of the most simple ways Eliminate minor defects on plastic - these are their masking with special pencils. Of course, the cost of such pencils is quite high, but in this case this factor is fully justified by the result.

The principle of masking scratches in this case is very simple: it is enough to apply the composition on those places where defects are present. As a result, the scratch across the depth is filled with a special composition, after which it will be impossible to detect it visually.

The main nuance in such a restoration of the plastic surface is that it is necessary to very carefully pick up the color of the pencil, otherwise a noticeable spot appears on the panel having another shade.

Overhaul plastic

Finally, it is impossible not to mention the most expensive, time consuming and reliable method Recovery - overhaul. The difficulty lies in the fact that for repair, the plastic part is required to be removed from the cabin. Repair is performed in several stages:

• after removing the panel is traditionally washed away from dirt and dried;
• the next step is grinding the surface (if only it is not corrugated);
• next, the plastic panel must be coated with primer, and after drying it with the help of a small abrasive to bring to a smooth state;
• the last step will be painting, with a layer of paint from above it is worth covering lacquer for maximum reliability.

Video: What to remove scratches on plastic in the car

Conclusion

The appearance of scratches on the plastic in the car's cabin is a rather painful topic for many drivers, but she does not tate in itself. Always need to remember that any damage to the plastic surfaces can be eliminated- It is enough to choose the optimal way to get rid of scratches and implement it efficiently. Now we are tetal to the question, how to remove scratches on the car's plastic.

Unintentional scratches on plastic surfaces Inside the car occurs quite often. How to remove scratches on plastic in the car? We will try to tell about it in this article.

The reasons for the occurrence of scratches in the cabin - mass. But eliminate this flaw is quite real.

Each car owner who has at least one child in the family knows no insidiously what scratches are. Alas, this is the usual thing when a child from nothing to do begins to scrub plastic on the doors of the car during the trip. Often it is possible to detect scratches from the bottom of the doors, it is also the fault of the kids, they love to beat the legs on the door, maybe it happens unwittingly but, alas, this can happen with each. Of course, adults can also be lacquered to damage the plastic coating on the doors inside the car, it can be made by shoes or ignition keys.

We voiced the most frequent reasonsFor which scratches occur inside the car:

1. Transportation of animals (dogs or cats from fright can start shaking door claws).
2. Transportation inside the cabin of large-sized items.
3. Baby pranks.
4. Damage to plastic shoes.
5. Damage to the material keys.

Removal scratches on plastic in the car

In this part of the article we will talk about the most common options for removing scratches on the plastic of the car.

If there are large scratches and even faded plots, you need to think about the overhaul of plastic. In addition, it is recommended to pay close attention also to such a case: a corrugated surface is usually not amenable to repair, and in the case of such a repair option - staining the entire surface.

What if scratches on plastic are very deep?

Prior to this, we described the most popular options for removing damage on plastic. But what to do if they are very deep, then how to remove scratches on plastic in the car? It is not necessary to despair, here too, there is an effective solution to this problem, of course, it will require more effort from the car owner, but with its proper use, the result will exceed all the expectations!

It will take a small piece of plastic, according to the color palette suitable to the surface being repaired. It is recommended to take the material from the inside of the plastic, for example, from the partition. With these actions, we do not harm the design of the details.

Dichloroethane can be bought in such a format.

Plastic must be dissolved in such a substance as dichloroethane. The resulting consistency is evenly applied to the place of damage. While the surface to be processed is not fully frozen, it can be done any desired form.

Polishing plastic parts is not able to completely hide scratches, it can only refresh their appearance. It is absolutely inappropriate on rough, as well as the matte surface.

The door thresholds are also not suitable for polishing, they are not subject to repair at all, they are easier to replace them with other details.

Alignment of large scratches:

• on the damaged area it is necessary to apply the composition, which proper use Must fully fill the scratch. It is selected by the type and the general properties of the material being repaired;
• a damaged plot is very careful;
• after the factory pattern is applied on the entire surface of the part being repaired. For this, the surface is covered with a special gel plasticizer. And after its complete frost, the gel is removed, but only the resulting pattern remains;
• next, tinting and directly staining.

Removal of flaws on plastic in the car is a rather laborious process. If you are not sure of your abilities - use the services of a hundred.

How much will appeal to a hundred

Many STRs offer services in the field of scratching on plastic car coverage. Modern hundred in their work use only professional tools and material. Removal of scratches by car is the most important specialization of such companies. Depending on the type and complexity of damage, the SOST specialists offer the most affordable and effective option Elimination of the problem.

So if the car owner has problems with internal or external damage to the machine, you must immediately ask for help of a hundred! There will be returned to the interior of the car the original appearance.

The cost of such a service can be different, for example, for a small area of \u200b\u200bdamaged plastic can take from 500 to 1000 rubles. Well, if the scratches are too deep and very big, then for their elimination will have to pay from 1,500 thousand rubles and higher, it all depends on what region the car owner lives. Prices are different everywhere and definitely say this data is impossible.

Another option independent elimination Scratch on plastic you will find here:

Summarize

The occurrence of scratches on plastic surfaces in the cabin of the car is a rather painful topic for most car owners, but it does not make a special danger. It should always be remembered that any even major damage to plastic can be eliminated - just choose optimal option Remove scratches and implement it correctly. Now you know how you can get rid of scratchs at home yourself, but if you are not sure of your capabilities, it is better not to start: what to spool, then do not fix it and you can eventually get on a large amount of money.