To easily eliminate scratches and scratching on any plastic surface, you need to act as little carefully and follow the instructions for finished compositions, since not all polyters are suitable for plastic. There are many ways to bring a damaged surface to an initial ideal mind. Some of them will only help disguise scratches, and others - get rid of them completely.

Show all

Use of specialized funds

On sale there are a lot of different means designed to eliminate damage on plastic surfaces. They can be found both in automata and in cellular salons. Select remedy should consider the nature of damage:

• Small scratches and scuffs are easily eliminated using polishing compositions.
• Deep damage requires primer application and subsequent filling of scratch special paste.

It should be noted that colored pastes are suitable for large scratches in the surface tone, allowing without a trace to disguise damage. Minor scratches can be eliminated with colorless compositions.

Methods of polishing glasses of clocks from scratches and other damage at home

How to polish scratching

To secure small scratches, the following means are suitable:

• Polyrol for CDs "Disc Repair".
• Means for polishing displays of mobile phones "Displex". Also suitable for watch displays, PDAs, etc.
• Paste for polishing plastic details car (with the smallest graininess).

Before proceeding with polishing, the surface should be deguted with alcohol. It is necessary to polish with a cotton cloth until the scratches disappear.

How to remove scratches in the car

To remove scratches from surfaces in the cabin, there are several methods:

• application of a construction dryer;
• the use of polishing compositions;
• scratch processing with special pencil;
• overhaul of plastic part.

The choice of a specific method depends on the severity of damage and on the characteristics of the injured surface.



Removal of damage to the thermofhen

Initially, we need to thoroughly wash the surface with the help of detergent. After drying the plastic, you need to turn on the hair dryer by installing minimal power on it, and send to a problem area. If nothing happens to the surface, then the power of the device must be increased so that the plastic began to melt slightly.

As a result, damage is either completely disappeared, or it will be significantly reduced and they can be eliminated by polishing.

This method is suitable not only for the parts of the car, but also for plastic parts of the moped and other products.

Polishing

For polishing, abrasive paste is needed for plastic.

The compositions designed for paints and varnish coatings are not suitable for this purpose.

To remove scratches from plastic, follows:

1. 1. To carefully wash the surface and completely dry.
2. 2. Apply on problem places Abrasive paste and wait a certain time specified in the instructions, the paste must turn into a solid fall.
3. 3. Polish the surface circular movements With the help of a special vet to the complete disappearance of the paste.

At the end of the plastic you need to neatly wash the soft cloth.

Special pencil

This is the easiest and fast way elimination scratches with plastic in the cabin and on the bumper of the car or plastic parts of the scooter. If the pencil is purchased for color plastic restoration, it is necessary to correctly pick it up.

Scratch removal algorithm:

1. 1. Problem places must be carefully cleaned and dried.
2. 2. Fill out with a pencil all scratches and wait a certain time (according to the instructions).
3. 3. Remove excess, polish the surface.



Plastic Bearemont

If the plastic part is strongly scratched and loss, you can resort to overhaul. To do this, the damaged panel must be removed from the car, wash and polished with sandpaper (if the surface is embossed, it does not need it in grinding). Further:

1. 1. The part should be covered with a special primer, which is produced in the form of spray. It is applied in 2-3 layers with drying interruptions.
2. 2. Next to align the primed surface with shallow sandpaper.
3. 3. If scratches are very deep, they must be filled with putty.
4. 4. After that, the part should be covered with the paint of a suitable shade.

How to remove scratches from the phone

In the event of damage to the phone screen, it is better not to risk trying to bring the display in order using home tools. It is necessary to use special compounds for polishing displays. But they will not help disguise only small scratches.

To remove scratches from plastic parts of the phone, you can use toothpaste:

1. 1. A small amount of paste or dental powder, diluted with water to the state of the Cashitz, should be applied to problem areas and labeled the circular movements.
2. 2. Wait until the paste is completely drying.
3. 3. Wash the screen with a cotton disk, moistened in clean water.

Another effective way is to use a car polyrolol: the remedy should be applied on a soft cloth and rub the plastic to the disappearance of scratches.

If there are significant damage on the phone, it is better to contact the service center.

Elimination of scratches with plastic surfaces laptop

In some laptops, the lid is made of glossy plastic. MicroCarappins often appear on such a surface.

Certain with them at home can be as follows:

1. 1. Gently erase dust from plastic surfaces, wipe with a wet cloth, and then from the microfiber.
2. 2. A small amount of Displex or Digitex paste to scratch and wipe with a soft cloth or cotton. If the damage did not disappear completely, it should be applied again and polished.

This method cannot be used to process LCD screens. Polishing paste particles can damage the LCD matrix.

How to remove scratches on glasses

The following remedies will help to eliminate scratches on glasses:

1. 1. Polyrol for silver products. A small amount of means should be applied to glasses and wipe the fibra to eliminate defects.
2. 2. Polyrol for furniture and vaseline. It should be purchased composition for polishing of wooden furniture and wipe the lenses. After that, apply a slightly petroleum on a soft fabric and treat the surface.
3. 3. Tool for car glasses. The composition needs to handle damaged areas using a soft napkin. It will make scratch invisible, and lenses will continue to fiery less.

These methods allow only damage to invisible, but not to remove them completely. You can finally get rid of small defects with an abrasive for glass, which is used in painting. Due to the presence in the composition of the plaguing acid, this tool completely eliminates scratches. With this processing, the anti-reflective points of the glasses are destroyed, but the lenses themselves are not damaged.

Applied abrasive as follows:

1. 1. To protect hands you should wear latex gloves.
2. 2. Put the lenses into the container and fill it with abrasive.
3. 3. Wait 5 minutes, after which rinse lenses under the crane.
4. 4. The items with which the abrasive contacted immediately needs to be thrown away.

As a result, the lenses will become perfectly smooth and improved visibility.

The external state of plastic parts in the cabin worries many drivers no less than the operation of the engine and the rest of the vehicle. This is especially true of the front panel, as it is constantly in front of her eyes. So the owners of the car will useful information How to effectively remove scratches from plastic and avoid changing the interior elements. But you must first classify damage to determine the restoration method.

Types of damage to plastic

The most common damage to the plastic in the car's cabin is small scratches. Such defects are usually available in a plural, forming a whole web, which is pretty spoils the appearance of the interior. Such scratches are very easy to disguise or remove completely with special means. This repair will cost inexpensively and takes a little time.

More serious troubles are waiting for the owner of the car, which will have to repair deep scratches on the plastic of the cabin. Many of these defects cannot be hidden by simple methods, so you have to use the cardinal methods that are described below. With their help, even the deepest scratches on the plastic of the cabin can be removed and avoiding the most expensive replacement of the entire part entire detail.

Another type of damage to the plastic of the car's salon is the result of the impact of direct sunlight. After a long effect of ultraviolet radiation, the torpedo surface becomes matte and loses its color, and in combination with scratches, such a defect degrades the appearance of the cabin. To correct the situation, you may need to overhaul surfaces.

It should be paid to the fact that the removal of scratches on the parts of the cabin is not always a simple task. If the surface of the plastic has a corrugated structure, it will not be possible to cope with defects with defects. In such cases, almost any scratches require major repairs. In a different way, things are smooth surfacesSince remove scratches from such a material is much easier and faster.

Main ways to remove scratches

Depending on the type of surface and complexity of scratches, the repair can be carried out by the following common methods:

• removal of scratches with a hair dryer;
• smoothing the surface of the source of open fire;
• disking defects with special pencils;
• overhaul of plastic, which includes stripping, priming, painting and varnishing.

For corrugated surfaces, only the last two methods can be used, since the repair by the rest of the methods can even more worsen the appearance of plastic. Otherwise, it is possible to use any of the above methods, it all depends on your effort and type of scratches on the elements of the cabin. Further more detailed about each of the above methods.

Eliminate scratches with a hairdryer

Remove small scratches or web from them with the most ordinary hairdryer. In this case, not only the building tool, but also the household, as its power is enough to remove shallow scratches. The principle of such restoration is very simple - when heated, small defects are delayed by themselves and become either at all imperceptible or significantly decrease in the amount.

To repair the car torpedoes in this way, you need to pre-wash the surface using detergents. It will save scratches from the dirt that contributes to the tightening when heated. When the panel is dry, you must turn on the hair dryer to small power And send a hot air flow to the place where you need to remove scratches.

During heating, it should be very closely monitoring the reaction of plastic, and if there is no effect, the power of the hair dryer is gradually added and the distance between the tool and the panel is reduced.

You should not instruct a hairdryer at one point, on the contrary, you need to evenly distribute hot air to avoid excessive heating of the part. If everything is done correctly, the damage will delay right in front of the eyes. Or at least it becomes noticeably less, which will facilitate further polishing restoration. After warming up, it is necessary to wait until the part of the cabin will be completely cooled, and before that it is impossible to touch it.

Hide damage lighter

Similar to the previous repair method with an open fire. To remove defects in this way, you need to bring a lighter for a very short time to the plastic and carry out the flames along the scratch several times. It is necessary to act extremely carefully, it is advisable to practice in the execution of such a repair on some unnecessary piece of plastic with the same structure.

After exposure to fire on the cluster of scratches, it is necessary to wait for a while until the plastic cools. Up to this point, it is categorically forbidden to touch it. South, which left the flame, can be removed with a cotton disk dipped in alcohol. If the first time defect does not disappear, it is better not to risk and try another method for removing scratches.

Repair of plastic polishing

One of the most simple and secure restoration methods is polished using a special abrasive paste for plastic. Do not use the means that are intended for paint coating. Their structure can harm soft and militant plastic.

You can polish both manually and using a grinding machine, while the spindle speed should be set to a minimum value.

Excessive high revs Grinding circle can melt plastic and bring it into a deplorable state. It should be noted that plastic in the cabin is not so much, so a safe manual polishing will not take much time.

Deleting defects in this method as follows:

• The surface of the plastic element is thoroughly washed away using detergents. Special attention is paid to those places that have evaporated dirt particles.
• After that, the surface is dried and cooled in a dark room.
• When all the conditions are created, an abrasive paste is applied to the surface of the panel. You need to do this manually with the help of a piece of foam. After applying the pasta, she gives some time to trigger.
• It is necessary to start polishing after the remedy turned into a light color. It is usually enough to wait for about five minutes.

The entire surface is methodically polished until the applied paste is completely disappeared, while periodically it is necessary to remove dust, which was formed from dried polishing paste. At the end of polishing, the surface is thoroughly cleaned and washes, and it should be proceedable and not to create new scratches.

Disguise scratches with a special pencil

The easiest way to get rid of defects on plastic parts of the cabin is to disguise them with a special pencil. This method cannot be called the cheapest, as really high-quality markers to remove scratches are not suiced. Although the same pencil, bought one day, can be used several times, which makes such an acquisition rather favorable in perspective.

By itself, such a pencil is a bottle in which there is a special composition. If you apply it to a damaged place, then the recess in the form of scratches will be filled and thus disappear from the view.

Of great importance, when choosing such a pencil, the selection of the color, which must match the shade of the panel.

Everything is much simpler, when the panel of standard colors is black or gray, because for them it is much easier to choose a restoring marker. Repair is carried out very simply - damaged places are thoroughly cleaned from dirt and dust. The sharp end of the marker is carried out by the scratching of scratches, and when the applied composition freezes, its excess can be removed by polishing, which will additionally hide defects, having threw them with neighboring sites.

Overhaul plastic

The most complex type of plastic repair is painting. Despite the complexity and high cost of this method, there are all guarantees that you can achieve complete deletion of all existing defects. It is possible to change the color of the panel, create new interiorwhich more corresponds to the tastes of the owner of the car.

For such a repair, you will have to extract the part from the cabin, which is troublesome, but only so you can avoid contaminants of windows and lounges. The part is extracted from the machine in accordance with the manufacturer's recommendations, which it indicated in the instruction manual. After dismantling, the recoverable element is brushed from dirt and is carefully clean with the use of detergent for plastic.

Next follows surface grinding. If the item has a corrugated structure, then nothing will be grinding. However, today, most elements of the cabin are initially created smooth, which greatly simplifies the care of their condition, and makes them more realistic. The surface is aligned or manually, or using the machine, and as an abrasive you can take the smallest sandpaper.

After that, the surface is covered with a brine from the can, it is necessary to choose a soil that does not react with plastic. After applying two layers, the surface is matched with small abrasive to the perfectly smooth state. If there are deep defects on the panel, which do not overlap the ground, then they need to be embedded by putty.

Next, the primed surface is painted into the appropriate color and is optionally covered with a layer of varnish. In some cases, the coating of the varnish does not apply - this applies to those elements of the cabin, which, due to their form, can create glare from sunlight and interfere with driving a car. The same can be said about cases when matte paint is selected.

Plastic objects surround us everywhere: these are parts of the car, household goods and even sunglasses. Plastic is a popular, inexpensive, but rather fragile material, so because of the frequent use is covered with small damage. There are a few simple and inexpensive ways Remove scratches from plastic, which will help to return the product prime-out look.

Special means

To not bother, use special products to restore plastic objects:

• pencils to remove scratches;
• abrasive gels;
• polishing pastes for filling;
• restoring towels and napkins.

When choosing these funds, you need to act strictly according to the instructions. Some formulations are colorful. Colored substances are suitable for filling in deep scratches.

Tip! Choose pasta only for soft plastic, it must be specified on the package. Products for paint surfaces can not be applied.

Work with small damage

Small cracks very simply refuel special paste. Polishing funds are divided into two groups:

• rough abrasive compositions;
• finish lung consistency.

For household products from plastics, only finishing polishing pastes are used. Abrasives can even more damage objects.

How to work with polisol:

1. Clear surface.
2. Apply a small amount of means on a piece of fabric (the flannel is suitable and any soft matter).
3. Slightly rub, wash off and dry.

Restoration of plastic in the car

Car owners are familiar with the situation when the parts of the machine are damaged from frequent use. A large number of scratches will sooner or later lead to the destruction of the material. To avoid full replacement Plastic parts in the car should take timely measures. How to return the wholeness of plastics in this case:

1. Heat treatment with a hair dryer or lighter. Before removing scratches in this way, the surface is washed, degreased by alcohol and dried. Hair dryer include on maximum power. When processing hot air, it is necessary to closely monitor the plastic reaction. Defects will be smoothed by heating. If it is not possible to achieve the desired evenness, the procedure is completed with polishing.
2. Method with lighter: The included device is taken to the damaged surface is not closer than 5-8 mm. The fire will melt the plastic plot, returning the smoothness. Important: After processing, it is impossible to touch the hot surface, it should cool at least for half an hour.
3. How to work with abrasive paste: to the purified and dry plastic are applied to the tool, withstand the time according to the instructions until the paste will find white color. Then polish plastic with a foam sponge or dense matter.
4. Express method with machine oil: Drip a couple of drops of substance and polish the surface with a dense flannel cloth. It works only on uncooked plastic, suitable for gloss.
5. If the surface is embossed, only special will restore it pencil mask. The masking marker is expensive, but this is the easiest way to repair deep damage. The result is preserved for a long time. Apply the tool is needed on a clean surface. Pencil residues are easily removed after dried by polishing.

Tip! Pencil is selected in color. The material is darker will be noticeable after repair, which will not improve the type of product.

Folk wisdom: Lifehaca with prudent means

Use the following methods for removing plastic quite risky, especially if it is valuable appliances or mobile phone. However, many funds are much cheaper than specialized and found in every home.

6 Verified methods for restoring plastic objects:

1. Toothpaste and powder. Substances can be treated with a plastic phone cover or sunglasses. It is better not to experiment with the phone or tablet display, but some argue that small scratches are easily removed from such fragile surfaces. How to act: Apply a little paste on the plastic or the casket from the water and the dental powder, labeled the circular motions into damaged places, wait for drying, and then rinse with a cotton disk.
2. Baking soda It is used by the same principle: to dilute to the state of the cashem, go into a cracked surface, washed off.
3. Several drops of vegetable oil They will help to return the plastic not only smoothness, but also shine. It is necessary to apply a means to small cracks and labeled until the fat stain disappears and the appearance of a pleasant brilliance.
4. Polyrol For furniture or car, it works on other surfaces. A polyrolol for jewelry is suitable: it will help with damage to transparent plastic.
5. On windows, scratch glasses can be processed wax. You should apply a fabric and rub in a circle.
6. Small damage treated Sunny suede. It is safe, in contrast to sandpaper and other hard abrasives.

Before lowering the hands and go to the store for a new household subject or hurry to change the details of the car, try the above methods. Some of them are so effective that they will help to significantly save the budget. The main thing in the work is to follow the instructions, accuracy when using fire, confidence and accuracy.

Nowadays, plastic is very common in everyday life, he in the literal sense surrounded us from all sides. Mobile phone and other devices, diverse household appliances, most of the interior items, kitchen furniture and even a car - everything enters the scope of this miracle material. It is so popular with a variety of its parameters, but also it is characterized by low wear resistance. Anyway, everything in this world is not forever! Sooner or later and plastic surface Warves, coated with microhasions, no matter how carefully you relate to things. But how, to return the original look to your beloved thing, so that the internal esthete is shoved? Now we will try to answer this question!

Important!!!

Fortunately, there are now on sale there are many special funds (special pencils, pasta, polyroli) to help consumers of plastic products. Each of them is suitable for its type of damage and each has individual instructions for the application, which should be strictly followed!

« Ambulance»For plastic

For example, when working with deep scratch, it will be better to use colored tools to make it the most imperceptible. And with small scratches, it will be possible to do with colorless means or use a polyrol with a soft silicone texture (abrasive particles have nothing to do). Before the procedure, the area with which you are going to work must be deguted using alcohol or acetone, and to apply the means and polish better with the help of a soft flannel napkin, linen or cotton fabric. By the way, the ordinary Children's Pelleka is perfect.

Hand agility and some risk

There is also one fairly interesting way for people who are sufficiently confident in their skillful hands or for those who will not be upset because of the spoiled thing, in case something goes not according to plan. This method is to carefully warm up the lighter damaged plot, not approaching the flame closer than half a centimeter. Thus, the edge of the scratches will be bored and a little will change the relief of damage. But I repeat: it is necessary to do it very carefully, for the result of overheating will be too large deformation and a spoiled thing.

Paste GOI

The composition of this miracle - paste the times of the Mesozoic era, and to be more accurate, then the thirties of the last century include such a chemical element as chrome. It is it that allows you to grind plastic, and even metal, while grieving all irregularities and roughness, giving the smoothness of any of the similar surfaces, get rid of scratches.

It is only important not to confuse the graininess of the paste used, because one species - with a large graininess, maybe, on the contrary, scratch the surface with a polished surface, and №1, with small graininess, on the contrary, will bring to the brilliance, but does not compare deep scratches.

Baking soda

This tool has every mistress in the kitchen, so it can be used as one of the cheapest solutions to the problem.

For example, scratches from the screen mobile phone You can remove the circular movements, rubbing the cassea of \u200b\u200btwo parts of the food soda and one part of the water. The remains of soda after the desired result will be removed with a wet cloth.

Council

Before using this method, Clamp with a sticky ribbon or scotching holes of the speakers and other "necessary" slots, to avoid blockage and damage inside the phone itself.

Scratches on glasses

We all use points (at least to improve vision, at least sunscreen is not the essence), but the covers for them perceive more as an accessory on the shelf, a thing that occupies a place in the handbag, and is generally useless. And in vain! Even wearing on top of the head, outside the wearing time on the nose, will not protect the scratch. The branches of trees found on the way, low ceilings, openings and much more sometimes lie unexpectedly, but it would seem that a tiny scratch prevents the normal review yes already and becomes dangerous for sight. What to say about the damage due to anti-glasses thrown on the beach pebble, only purchased for long-awaited vacation.

How to fix the situation? We offer to use what is at hand on vacation, and on arrival to correct the situation with more serious methods. If you grabciated with you and the care agent (for example, microfiber wipes impregnated with a special tool), use it, removing circular motions, like scratches from computer discs.

Council

The means for automotive glasses will also cope with microcenarpins and will even allow not to move the glasses glasses.

Overhaul

If you seriously approach the issue of reincarnation (for example, glasses were not at all and not yours, and they need to be returned to a friend as possible), use the abrasive for glasses, which is used in painting and contains a melting acid. She does not mask, namely "seals" all the cracks of plastic glasses.

Important!!!

With anti-gland, of course, you will have to say goodbye, spraying is melting under the influence of acid, but it will be all the whole and intverse. Do not forget to use rubber gloves, ideally - and a gauze bandage, but you can simply inhale the pairs of this acid. Jump for a few minutes - and rinse with running water! Everything!

Polyrol for furniture

An unexpected discovery for you can also be the use of scratches on plastic products of polyroli for wooden products. Unbelievable, but it is a fact! Watched disk impregnated with this means, rub before the disappearance of ill-fated scratches. In the same way, but with the addition of vaseline, get rid of scratches with plastic lenses of glasses.

Output:

The conclusion suggests itself: scratches - not a sentence, but just an annoying trouble, distinguishing the fact that not used on time precautions in use, such as protective films On the screens, covers and so on will largely simplify your life and your device.

In this article we will tell how to remove scratch with plastic in the car.

Scratches on the plastic panels of the cabin and body of the car deliver a lot of discomfort to the owners. Many motorists simply do not like that passengers who sit in their car can notice scratches and calculate that the owner does not care about the car. In addition, scratches on plastic worsen visual appearance. When selling a car, buyers may require a discount for scratches on plastic. In this article we will tell how to remove scratch with plastic in the car. We told entire five ways to this simple work.

Types of car interior damage

Damage to plastic parts in the car can be divided into several types:

- minor scratches on plastic;

- deep scratches on plastic;

- The result of the impact of the straight rays of the sun.

The table below shows a description of the types of damage to plastic in the car.

Plastic damage type	Description
Small scratches	The most common damage to the plastic in the automotive salon is small scratches. This defect is most often manifested in the emergence of a set. small scratches. They can form a whole web scratch, which. which will spoil the show of the cabin. Small scratches are easiest to remove or disguise from the surface of plastic. For this, special means are used. Repair of small scratches will be inexpensive and can take a rather short period of time.
Deep scratches	The second type of plastic damage in the car is deep scratches. They appear less often than minor. Their elimination takes longer. For many deep scratches do not fit simple methods Removal, even with special means. Therefore, you need to resort to the fundamental ways that we describe below. With the help of a unique method, similar deep scratches on the plastic panel in the car's cabin are removed and the trace leaves. This effective way will help you avoid expensive at the cost of replacing the entire plastic piece of car interior.
The result of the exposure of the straight rays of the sun	To the next type of plastic damage car Salon The consequences of the impact of direct sun rays. Ultraviolet radiation strongly affects the plastic torpedoes, torpedo becomes matte, and loses its original color. If, in addition to this, there are various scratches on plastic, then the appearance of the salon will immediately deteriorate. Such a complex plastic defect in the car can be removed only by overhaul surface.

We should clarify that the removal of scratches on the plastic of the car's salon is a rather difficult task. The larger the corrugated structure of the surface of the plastic, the more difficult it will be methods for deleting defects. In such cases, you have to resort to overhaul Plastic surface.

Main ways to remove scratches on car plastic

The choice of a method for removing scratches of plastic affects the type of surface and the complexity of scratches. Repair and removal of scratches can be carried out in the following ways:

- removal of scratches with a hair dryer;

- removal of small scratches by polishing;

- disking defects with special pencils;

- smoothing the surface of the source of open fire;

- Overhaul plastic, which includes stripping, priming and painting.

The corrugated surface of the plastic allows us to apply only the masking of defects with a special pencil or overhaul of plastic. Other plastic surface repairs can only worsen the appearance of the car panel. For all other types of plastic panels, it is possible to use any method of repair and removal of scratches. In any case, the result of the work depends on the performance of the artist and the type of scratches, which appeared on the car's interior panel. Next, we will tell you more about each way of removing scratches.

Elimination of scratches on plastic hairdryer

An ordinary hairdryer can help remove small scratches from a plastic panel or even a web of such scratches. In this method, you can use not only industrial hairdryer, but also the usual household, since even the power of the household hair dryer is enough to remove shallow scratches. The principle of surface recovery using a household hair dryer is rather simple. We heat the plastic panel with a heating hairdryer, from which the scratch mesh is delayed, or become almost imperceptible due to the fact that they decrease in their sizes. To eliminate small scratches on the torpedo, we must first thoroughly clean the surface of the torpedo using detergents and wet rags.

We heat the plastic panel with a heating hairdryer, from which the scratch mesh is delayed, or become almost imperceptible due to the fact that they decrease in their sizes.

This principle is that the scratch is getting rid of dirt from it, which will contribute to the fastest tightening of scratches when heated them. As soon as the surface of the torpedo dries away from our wet cleaning, we turn on the hair dryer to the middle power and direct the hot air flow into a plot with small scratches. However, we do not hold the included hairdryer constantly in one place of the plastic panel, we need to evenly drive them around this place so that the heat is distributed throughout the surface of the plastic panel. So we avoid excessive heating of plastic. Right in front of the eyes, small scratches will begin to delay or they will become less visible, which will further remove them with the help of ordinary polishing. After heating the plastic panel, the household hair dryer we need to wait to this detail Cool, only after that it can be touched.

Elimination of scratches from plastic using a lighter is quite similar to the previous method of warm-up with a household hairdryer. In this case, we use open fire. We need to bring a lit lighter to the plastic panel on which there are not deep scratches. We fell fire several times along scratch. Led a lighter on plastic need extremely careful. It will be better to first work in the performance of such a repair method on an unnecessary piece of plastic with the same structure as the panel in the car. Some time after exposure to a lighter on scratches on the panel, we will see that scratches either decrease in the amount or delay. While the panel does not cool down, it is impossible to touch it. If the use of the lighter did not help remove scratches, then it is better not to use this method for this plastic structure. You should try another scratch removal method.

We need a fairly short time to bring a lit lighter to the plastic panel, on which there are shallow scratches.

Polishing scratches on plastic car

Most. in an effective way Liquidation of small scratches on plastic is polishing with a special abrasive paste, which is designed for plastic parts. Be very careful, do not use abrasive paste for paintwork. Such a paste can spoil the soft structure of the plastic panel. In addition, it is not necessary to use a grinding machine for polishing plastic in the car's cabin, it can lead to plastic melting and deterioration external view Panels. Manual polishing Does not take you a lot of time, use it. Polishing plastic occurs as follows. First we wash the plastic panel from all types of dirt using various special detergents. After that, we give time to dry the plastic panel. Next, we apply an abrasive paste on the surface of the plastic with a foam rubber. We are waiting for a few minutes and begin to polish with a special vehicle. We must polish the surface of the plastic abrasive paste until it disappears from the surface of the panel.

We apply an abrasive paste on the surface of plastic with the help of foam rubber. We are waiting for a few minutes and begin to polish with a special vehicle.

Using a special labeling pencil scratch on plastic

Currently, there are special pencils for masking defects of plastic car interior panels. This method of removing scratches is not cheap. Since high-quality pencils are quite expensive. A special scratch camrack pencil is a bottle with a special composition. Applying a special composition on a scratch, we fill it with its deepening, and thus it disappears from the view on the surface of the panel. For a larger effect, we need to correctly pick up the shade of the color of a special pencil so that it fully coincided with the plastic shade. To apply a special marker for masking scratches, we will also need to clean the plastic panel from all types of dirt using special for this. detergents And rags. Next, we begin to drive the sharp end of the marker along the contour of our scratches. After drying the traces of the marker in the grooves of scratches, we need to carry out a light polishing of the surface of the plastic panel.

Overhaul of plastic panels

The overhaul of plastic panels includes painting and varnishing. This type of repair is quite complicated and expensive. However, with the help of it, you can achieve complete deletion of all defects on the plastic panel. In addition, we can achieve the desired effect - change the color of the panel to the one that we like more. To paint the plastic panel, we need to remove it from the car's interior. To do this, we use the instruction manual for a specific car model. Next, we clean the plastic panel from dirt. After that, we spend the grinding of the panel using the smallest sandpaper. Next, we cover the surface of the primer panel from the canister. The primer is applied in two layers. Next, we clean the surface of the panel with emery paper to the perfectly smooth state. After that, you can apply paint and varnish on the panel. Next, we let me dry the panels in the sun and install it back to the car's salon.