How annoying it can be when scratches and rags appear on the plastic elements of the interior on a recently purchased car. The car is only a few months old, and because of a couple of scratches in a prominent place it seems that the car has been in a taxi for ten years. But you shouldn't rush to get discouraged or go to the store to order new plastic, there are a couple of simple ways that allow you to remove or well disguise the results of careless operation.
Of course, not everyone is worried about the scratched plastic in the cabin, and in general what is going on in it, the main thing for them is that the car goes. But for many, especially those who bought new car, such things are very annoying. The easiest option is to drive the car to the service station into the hands of professional craftsmen. They will either refurbish or replace damaged plastic parts. However, this option is also the most expensive. But for aesthetes, such a sacrifice is justified, especially if the plastic was originally with a pattern or a complex texture, corrugation, then it will not be possible to restore the original appearance.
How to disguise scratches
For corrugated plastic elements, there is one way to independently restore the appearance - using a special masking pencil. But this is if the scratches are small. Pencil - Doesn't sound like the instrument actually looks like. In fact, this is a container with special liquid... The difficulty with using a pencil is accurate selection colors, it can be difficult to guess and match. This liquid fills the scratch, solidifies in it, and merges with the plastic background. That's it, the scratch is not striking.
Masking scratches on plastic with a hairdryer
Be sure to rinse and degrease the place that is planned to be restored before starting the procedure.
If the plastic is smooth and the scratches are shallow, you can use a hair dryer to remove them. A powerful household appliance will do, but it is better, of course, to get hold of an industrial model. The process of restoration with a hair dryer is quite simple, the mechanics of this action are based on the property of plastic to soften when heated and, like water, to independently tighten small irregularities. The main thing here is not to be too zealous in heating, so that the plastic does not accidentally flow. It is better to have a magnifying glass through which you can carefully observe how the plastic softens.
Removing scratches with a lighter
If you are extremely economical, and self-confidence is off scale, then you can crank this operation with a regular lighter. The principle is the same, we heat the plastic, it softens and tightens scratches. But you should take into account the specifics of the method, since an open flame affects the surface in a slightly different way. It is better to practice on similar pieces of plastic first for greater confidence. Just in case, transfer the fire extinguisher from the trunk to avoid tragedy.
Poor quality of plastic, constant entry into and exit from the salon, "flight" of keys and other personal items - all this causes scratches in the cabin vehicle... On the one hand, it is impossible to avoid the appearance of these defects, so many do not pay their attention to them. But on the other hand, they spoil the appearance of the cabin, make it uncomfortable.
Therefore, it is best to get rid of the scratches as quickly as possible. Nevertheless, the following question remains relevant - on the plastic in the car interior with your own hand?
Time-tested ways
If there are shallow damages on the surface of the plastic, you can remove them using:
- anti-scratch means;
- special pastes;
- pencils that eliminate defects;
- improvised means (lighter, hair dryer, rags).
If you use at least one of the methods mentioned above, you can guarantee a high chance of success. Not confident in your abilities? Then, most likely, you cannot do without the help of specialists.
Lighter
Before removing scratches from plastic in a car, you most likely did not even suspect that you can do this with a regular lighter. But practice shows that it is quite possible to do this.
It is enough to purchase not an ordinary gas lighter, but one that emits a blue flame. By briefly pressing the ignition button, slightly warm up problem place.
The plastic will heat up and the scratches will smooth out evenly. It is highly discouraged to touch the surface with your fingers, as this can damage it.
Note! The presented method of how to remove a scratch from the interior plastic is suitable only if there is a defect on the smooth plastic. If they are present on a part with a "bumpy" structure, it is quite possible that the entire texture is distorted. Accordingly, the appearance of the plastic will deteriorate greatly.
Video: get rid of scratches with a lighter.
Polishes and gels
The second way to get rid of scratches on the interior plastic once and for all is to get a special one. Their application is quite simple. You just need to apply the recovery cream to the plastic and wait for the moment when it completely hardens.
At the moment, the most popular materials are Displex and Disc Repair.
Their microparticles are able to interact with the plastic surface, as a result of which the paste completely clogs problem areas. Optical distortions in places where the scratch is refracted are completely removed. Accordingly, the defects are no longer visible.
Attention! The Displex paste application procedure is simple, even for beginners. In order to grind the composition over the surface, you must use a cotton cloth or cotton swab. Never apply the paste with your hands! Complete drying time - from 20 to 40 minutes, depending on temperature conditions, depth / size of the scratch and humidity.
How to properly remove scratches from gloss?
The question of how to remove scratches from glossy plastic is most often of interest to foreign car owners. Large defects are quite difficult to eliminate on their own, but if you do everything as described below, problems will not arise.
- Apply a special compound to the damaged area. The "Displex" described above will do, but it all depends on the properties and type of plastic.
- Sand damage. Do the procedure carefully.
- Once the composition has hardened, apply a textured pattern to the surface of the plastic. To do this, a special gel fixer is used. It is applied to the undamaged part. As soon as the gel hardens, the drawing is transferred to the place in need of restoration.
- Tint and paint the area to be repaired.
There is also a polish for dashboard "Atas Plak" (750 ml bottle). The product contains silicone, which gives shine and protects the interior from dust.
According to reviews, it relieves glossy plastic from scratches well. You can buy, try it and leave your feedback in the comments.
Repairing pencils and towels
Those who are wondering how to remove scratches on plastic in the car can use special wax crayons or crayons of a suitable color. They are sold at any car store.
HardWAX wax pencils
Thanks to the contents of the pencil, the material will completely fill the damaged part, leveling out all defective areas. As soon as the product hardens completely, you can start applying paint.
The presented method is most popular, since at home it allows you to get rid of damage as quickly as possible. The surface is usually painted in the event that the color of the marker does not match the shade of the plastic. But if you can choose the tone with one-to-one accuracy, you will not have to deal with coloring.
Remember! Regardless of which product you use and how deep the scratches are on the surface, always degrease the surface. The most optimal degreasers are acetone and alcohol. Never use gasoline or white spirit! The substances that are in their composition are capable of penetrating deep into the material, making it very fragile. Aggressive substances can completely ruin the surface of the plastic.
Cleaning towels... Try cleaning up scratches with commercially available professional rags.
Working method, watch the video: how the process itself takes place.
conclusions
Before removing scratches from transparent plastic, be sure to degrease the surface. Use different materials and techniques depending on which material is to be processed (matte, glossy or transparent plastic).
The easiest option is to heat the surface with a lighter that emits a blue flame. If the nature of the damage does not allow using this method, you will have to pick up a cream paste or a regenerating marker. Having performed the procedure correctly, after the materials have completely hardened, it will become impossible to find the place where the scratch was.
Accidental scratches on the plastic in the car interior appear regularly. How to remove stripes on plastic yourself at home? The depth of the lesion is easily determined with the naked eye or by examination with a magnifying glass.
You can cope with shallow damage using:
- polishes,
- anti-scratch,
- polishing pastes,
- pencils from scratches,
- the work of a service station specialist,
- handy tools (hairdryer, lighter).
Advice: inspection of scratches should be carried out in the daytime outdoors, or in a room with good lighting.
The main property of plastic is softening under the influence of high temperatures. The surface to be repaired must be washed and dried. Heat it up gradually with a hairdryer. Small lines are smoothed out under the influence of heat and become invisible. Deep ones do not disappear, but are smoothed out a little. Removing scratches with a hair dryer is recommended on the smooth plastic of the car interior. On "pimpled" the whole texture is distorted, and the appearance of the plastic will only worsen.
Removing shallow roughness on plastic with a lighter
Displex polish is designed to mask and remove scratches on the car dashboard screen. The paste works on small streaks on the laptop screen. Displex in a red tube perfectly masks the scratches on the plastic in the car interior. When polishing with Displex®, the surface is exposed to micro-paste particles.
Plastic particles enter the scratch cavity and clog it with themselves. As a result, the stripes are not fixed by our vision - the paste removes optical distortions at the boundaries of refraction of scratches.
Application: applied by Displex in a circular motion with a cotton cloth, cotton swab (disk), baby diaper. The procedure takes 2 minutes. If the scratch is visible, rub again with a polishing motion. The total amount of time spent will be 20-40 minutes. Depends on the size and depth of damage.
Deeper defects are not easily eliminated, in several stages.
Removing deep scratches on plastic in the car
A small piece of plastic is required, similar to the area being repaired. Take from the inner surface of the plastic (from the partitions). This will not harm the structures of the parts.
Dissolve the plastic in dichloroethane or in another solvent (like plastic). Gently apply the resulting solution to the scratch. Until the surface to be repaired has hardened, it can be given a plastic texture and any shape.
Polishing the plastic does not completely disappear scratches, it only refreshes its appearance. Not at all appropriate on rough, matte surfaces. Thresholds and door holdings cannot be polished or repaired. Parts are replaced with new ones.
Removing large scratches:
- apply a scratch-filling compound to the damaged area. It is selected according to the type and properties of the plastic;
- gently sand the filled damage;
- after restoration, apply a textured pattern to the plastic of the car interior. To do this, cover a part of the undamaged surface with a plasticizer gel. After hardening, remove the gel, transfer the resulting pattern to the restored place;
- perform tinting and staining.
Advice: removing scratches on plastic in a car is a rather complicated process. If you are not sure of your skills and abilities, use the "Grout scratches" service. This kind of work is done in many service stations and car washes.
Everyone has a lot of plastic things in their apartment, often for daily use. For example, it can be a refrigerator, kettles, blenders and other items. household appliances, phone case, and car showrooms. Due to the fact that these things are used quite often, scratches appear on the plastic from prolonged use, sometimes deep. However, don't worry, there are some tips on how to remove scratches from plastic effectively and easily.
Today, you can find a large number of products that will help remove scratches and microcracks on the surface of objects made of plastic. The most common is considered to be such tools as polish, which removes damaged areas on plastic; special pencil; crack filling paste. However, they only work when the scratches are not deep.
You can fix small cracks yourself using polishes designed for car body treatment. The polish can be rough (that is, its texture has an abrasive property), as well as finishing (in this case, the texture is quite soft and silicone). It is best to choose only a finishing polish for household plastic items so as not to cause even more damage to the coating you want to restore.
How to remove scratches in a car interior?
You can eliminate scratches on the plastic inside the interior of your car yourself. The choice of tools depends on the degree of damage and the type of coating, including a hairdryer, polish, pencil, and if none of the proposed options helps, then overhaul of the part.
Hair dryer
You can execute the following actions both with the help of an ordinary hair dryer, which dries hair, and with a construction one. During this procedure, the plastic will heat up, and the damage will heal by itself, due to the fact that they will melt somewhat.
- Before starting work, wash the part well with detergents.
- When it dries, you should turn on the hairdryer (it is recommended to use the minimum power), and then direct it to the problem area that requires restoration.
- In the case when you do not notice that any changes have occurred, increase the power so that under the influence of temperature, the plastic surface melts a little.
- Never hold the instrument in one place, as you risk overheating the plastic.
Note! You can touch the restored part with your hands only after it has completely cooled down.
Polishing
- Need to wear latex gloves and wash everything with detergent. Places where dirt and dust have accumulated require special attention.
- Then you need to dry the area of \u200b\u200binterest.
- Next, you need to apply a paste with abrasive properties to microcracks using a small foam sponge. Be careful! For a better effect of the polish, wait a little, as is usually indicated in the instructions for use.
- Wait for the polish to become white, and start the polishing procedure.
- Moving in a circle, it is necessary to clean off the excess abrasive, from time to time removing the resulting amount of dust.
- Then wash the cover.
Masking pencils
This method is the fastest and easiest way to repair cracks inside the cabin, as well as those that can be found on the bumper of a car. Pencil high Quality usually has a high cost, but it is a fairly economical and effective tool. In order to carry out the procedure, you need to follow these steps:
- Clean problem areas from dirt and dry.
- Use the tip of a pencil to fill in the damage.
- Wait for the surface to dry.
- Then you can remove the residues and start polishing. This should smooth out the transitions of the restored site and the rest of the coating.
Major interior repair
Painting is the most difficult and time-consuming way to restore this kind of surfaces. However, this option will definitely be effective and help hide the existing shortcomings.
- The element requiring restoration must be thoroughly washed and dirt removed with detergents.
- Next, you must sand the damaged area, but if the panel is embossed in its structure, then this step should be skipped.
- If it is smooth, you can start sanding using special equipment or improvised tools (sandpaper is often used).
- Then a special primer is applied to the prepared coating, which is produced in the form of spray cans. It is necessary to select a composition that will not react with the surface.
- Once you have applied several coats of primer, the plastic should be buffed with an abrasive until it is perfectly flat.
- In the case when there are large cracks on the panels, you need to fill them with a putty.
- When you're done renovation work, the coating should be coated with an appropriate paint.
- If necessary, plastic panels are also treated with varnish, however, it can cause reflections, which sometimes interfere with operating the machine.
Small cracks are removed using the following tools:
- Abrasives for polishing glass surfaces. Such products are also often used by artists, and they are the only way to remove all scratches, and not mask them. Hydrofluoric acid can be found among the ingredients in these abrasives, so never use them on parts that are not made of plastic.
- Glass cleaning products. If you want to remove a scratch on a plastic object, use a glass cleaner such as a car. It should be applied to the coating and polished with dry wipes. This option will help get rid of small cracks.
- Wax. Wax is suitable for efficient polishing of plastic surfaces. It is enough to put a little product on a piece of dry soft cloth and rub the plastic, moving in a circle. Remove excess with dry napkins or a cotton swab.
- In addition, sometimes a polish is used that is intended for processing wooden productsmixed with petroleum jelly. You need to buy at the appropriate point of sale products that polish the wood, and treat the problem area with it by mixing the product with a few drops of petroleum jelly. This product fills the damaged area and makes it less visible. Continue polishing until the Vaseline is completely wiped off.
- Also, you can use tools for computer technology, which most often treat discs, because this way you can remove frayed areas and small microcracks. Apply the product to the plastic cover using a soft fiber.
- Polishes for silver and copper will help you, which should be applied to the problem area and wiped with dry napkins or a piece of fiber cloth. This process should continue until the moment when you do not get rid of all the cracks.
In this article, we'll show you how to remove a scratch from plastic in a car.
Scratches on the plastic panels of the car interior and body cause a lot of discomfort to the owners. Many car enthusiasts simply do not like the fact that passengers who get into their car may notice scratches and feel that the owner does not take good care of the car. In addition, scratches on the plastic impair the visual appearance. When selling a car, buyers can claim a discount for scratches on plastics. In this article, we'll show you how to remove a scratch from plastic in a car. We will tell you as many as five ways of this simple work.
Types of damage to the plastic of the car interior
Damage to plastic parts in a car can be roughly divided into several types:
- minor scratches on the plastic;
- deep scratches on the plastic;
- the result of exposure to direct sunlight.
The table below describes the types of damage to plastic in a vehicle.
| Plastic damage type | Description |
| Small scratches | The most common damage to plastic in a car interior is minor scratches. This defect most often manifests itself in the appearance of many small scratches. They can form a whole web of scratches, which. which will greatly spoil the look of the cabin. Minor scratches are easiest to remove or mask from the plastic surface. For this, special means are used. Repairing minor scratches will be inexpensive and can take a fairly short amount of time. |
| Deep scratches | The second type of damage to the plastic in the car interior is deep scratches. They appear less frequently than small ones. It takes longer to eliminate them. Not suitable for many deep scratches simple methods removal, even with special tools. Therefore, you need to resort to cardinal methods, which we will describe below. Using a unique method, such deep scratches on the plastic panel in the vehicle interior are removed and leave no trace of themselves. This effective method will help you avoid the costly replacement of the entire plastic part of the car interior. |
| The result of exposure to direct sunlight | To the next type of plastic damage car salon include the effects of exposure to direct sunlight. Ultraviolet radiation quite strongly affects the plastic of the torpedo, from which the torpedo becomes dull and loses its original color. If, in addition to this, there are various scratches on the plastic, then the appearance of the interior immediately deteriorates. Such a complex plastic defect in the car interior can be removed only by overhauling the surface. |
We should clarify that removing scratches on the plastic of the car's interior is a rather difficult task. The more corrugated the surface of the plastic, the more difficult the methods for removing defects will be. In such cases, you have to resort to overhaul plastic surface.
The main ways to remove scratches on car plastic
The choice of method for removing scratches from plastic depends on the type of surface and the complexity of the scratches. Repair and removal of scratches can be done in the following ways:
- removal of scratches with a hair dryer;
- removal of small scratches by polishing;
- masking of defects with special pencils;
- smoothing the surface with a source of open fire;
- overhaul of plastic, which includes cleaning, priming and painting.
The corrugated surface of the plastic allows you to apply to itself only the masking of defects with a special pencil or the overhaul of the plastic. Other ways to repair the grooved plastic surface can only worsen the appearance of the car panel. For all other types of plastic panels, any method of repairing and removing scratches is possible. In any case, the result of the work depends on the efforts of the contractor and the type of scratches that appeared on the panel of the car's interior. Below we will tell you more about each method of removing scratches.
Elimination of scratches on plastic with a hairdryer
A regular hair dryer can help remove minor scratches or even cobwebs of scratches from the plastic panel. In this method, you can use not only an industrial hair dryer, but also an ordinary household one, since even the power of a household hair dryer is enough to remove shallow scratches. The principle of surface restoration with a household hair dryer is quite simple. We heat the plastic panel with a heat gun, from which the net of scratches is tightened, or they become almost invisible due to the fact that they are reduced in size. To eliminate minor scratches on the dashboard, we must first thoroughly clean the dashboard surface with detergents and a wet rag.
We heat the plastic panel with a heat gun, from which the mesh of scratches tightens, or becomes almost invisible due to the fact that they are reduced in size.
This principle is that the scratch gets rid of the dirt that has stuck in it, which will help to quickly tighten the scratches when they are heated. As soon as the surface of the dashboard is dry from our wet cleaning, we turn on the hairdryer to medium power and direct a hot stream of air to the area with small scratches. However, we do not keep the turned on hair dryer in one place of the plastic panel, we need to evenly drive it around this place so that the heat is distributed over the entire surface of the plastic panel. This will prevent the plastic from overheating. Directly before your eyes, small scratches will begin to heal or they will become less visible, which in the future will allow them to be removed using ordinary polishing. After warming up the plastic panel with a household hairdryer, we need to wait until this detail cooled down, only after that it will be possible to touch it.
Removing scratches from plastic with a lighter is quite similar to the previous heating method with a household hairdryer. In this case, we use open fire. We need to bring the lighted lighter to the plastic panel, on which there are not deep scratches, for a fairly short time. We run fire several times along the scratch. You need to be extremely careful when driving a lighter on plastic. It would be best to first practice performing this repair method on an unnecessary piece of plastic with the same structure as the panel in the car. After some time after the impact of a lighter on the scratches on the panel, we will see that the scratches will either decrease in size or tighten. Do not touch the panel until it has cooled down. If the use of a lighter did not help to remove the scratches, then it is better not to use this method anymore for this plastic structure. You should try a different method for removing scratches.
We need to bring the lighted lighter to the plastic panel, on which there are shallow scratches, for a fairly short time. Polishing scratches on the plastic of the car
The most in an efficient way elimination of small scratches on plastic is polishing with a special abrasive paste, which is designed for plastic parts. Be very careful not to use abrasive paste for paintwork... Such a paste can damage the soft structure of the plastic panel. Also, do not use a sander to polish the plastic in your car, as this can cause the plastic to melt and deteriorate. appearance panels. Manual polishing will not take you much time, use it. The plastic is polished as follows. First, we wash the plastic panel from all types of dirt using various special detergents. After that, we give the plastic panel time to dry. Next, we apply an abrasive paste to the plastic surface using foam rubber. We wait a few minutes and start polishing with a special rag. We have to polish the plastic surface with an abrasive paste until it disappears from the panel surface.
We apply an abrasive paste to the surface of the plastic using foam rubber. We wait a few minutes and start polishing with a special rag. Using a special pencil to mask scratches on plastic
Currently on sale there are special pencils for masking defects in plastic panels of the car interior. This method of removing scratches is not cheap. Since high quality pencils are quite expensive. A special pencil for masking scratches is a bottle with a special composition. By applying a special compound to the scratch, we fill its groove, and thus it disappears from view on the surface of the panel. For greater effect, we need to choose the right shade of color. special pencilso that it completely matches the shade of the plastic. To use a special marker for masking scratches, we will also need to clean the plastic panel from all types of dirt, using special detergents and rags. Next, we start to drag the sharp end of the marker along the outline of our scratches. After the marks of the marker have dried in the indentations of the scratches, we need to lightly polish the surface of the plastic panel.
Overhaul of plastic panels
Overhaul of plastic panels includes painting and varnishing. This type of repair is difficult and expensive. However, it can be used to completely remove all defects on the plastic panel. In addition, we can achieve the desired effect - change the color of the panel to the one we like best. To paint the plastic panel, we need to take it out of the car. To do this, we use the instruction manual for a specific car model. Next, we clean the plastic panel from dirt. After that, we sand the panel with the finest sandpaper. Next, we coat the surface of the panel with a spray primer. The primer is applied in two layers. Next, we sand the surface of the panel with sandpaper until it is perfectly smooth. After that, paint and varnish can be applied to the panel. Next, we let the panels dry in the sun and put them back in the car.
