The modern market offers every buyer a huge amount different models Gadgets, smartphones and other similar devices. Despite the fact that the display is reliably, the buyer decides to extend its service life, acquiring safety glass. This is due to the fact that in time we are not so careful about smartphones, as in the first stage. Today we will talk about how to clean the protective glass with inner And what we need for this tool.
What is protective glass?
Protective glass is a modern view of the displays on smartphones and gadgets. Make it using chemical method based tempered glass.
Important! Compared to an ordinary film, it is thicker and harder. That is why if this coating is present on the phone, it protects the screen from traces of fingers, scratches, moisture and even shock. Despite these characteristics, brightness and color does not change.
Due to the multi-layered coating, glass thickness varies from 0.25 mm to 0.5 mm, the composition of which is:
- The first layer is always made on the basis of silicone. It is glued to the display.
- The next layer is fastening. It is he who does not allow to spread with fragments if a crack or a mechanical blow occurred.
- The third coating layer is an anti-reflective film. It retains the appearance of drawings on the screen if direct sunny rays or other bright light fall on it.
- The protective layer protects against shocks, drops and other mechanical damage.
- The most recent layer is a oleophobic coating. It provides protection against moisture, fingerprint and simplifies the screen cleaning.
With the active use of the upper coating, ensuring the reliability of the unit, is contaminated. It is then that the question arises about how to clean the protective glass of the phone. How to do it and what will be required for this, we will look at further.
What is a protective film?
The protective film appeared on smartphones for a long time. It is not a high-tech product and is present on each gadget. This product is characterized by the presence of three layers:
- the bottom of them sticks to the screen;
- the average absorbs ultraviolet radiation and provides brightness when bright light;
- the top is responsible for protecting the display screen.
Important! The most important for the film is the correct gluing. To do this, you need to have a small skill, since the first time it can not always work out.
All protective films that are present on the smartphone and gadgets market are divided into three types: matte, glossy and mirrored. Let us consider every kind to understand whether there will be a cleaning difference:
- Matte film absorbs glare, and also hides traces of fingerprints. The main disadvantage is that it worsens the image quality. However, its cost is very low. Many masters include such a film to technological and advise not to stop the final choice on this product.
- Glossy protective film is the most popular among similar products. The main disadvantage of such a coating is that it is easy to damage. The film strongly reflects the light, quickly appear on it scratches and others mechanical damage. Also visible fingerprints.
- Mirror film is the least popular among similar products. The peculiarity is that with the extinct screen, it can mirror the image. However, the quality and brightness of the screen changes when sticking this coating is the main disadvantage.
All of the above films are polluted and especially this is noticeable when the dust falls under the coatings. How to clean the film for the phone, we will now discern.
How to clean the protective glass on the phone?
If you think about how to clean the film for the phone, then the ordinary scotch will help you, or as it is also called, the adhesive tape. For this you need:
- take a wide scotch;
- cut off a piece of approximately 30-40 cm;
- printed it to the surface so that the sticky side is above.
After that, it is worth protective film Sticky side glue to scotch. Then very carefully and slowly immediately sprinkle the film. All dust that was present on this product will leave, and the sticky layer will remain.
Important! If you need to remove scratches from the top of the protection, then polish defects with felt, a soft cloth or with the help of auxiliary means - a tooth white paste, goye paste or olive oil.
Another way to clean the protective glass on the inside is the use of water and soap. For this:
- You need to remove a contaminated product from the phone.
- In hot water, wash off all the dust.
- After this procedure, it is very good to clean the sticky layer soap. To do this, it is better to use two or three layers.
- After that, take and rinse the soap solution under water. Look to the water glass with the film.
- Then we glue the film to the purified wet display using an ordinary credit card.
- We look so that air bubbles and other villins do not fall.
Today we disassembled all kinds of protective films and talked about how to clean the protective glass from the inside. As you can see, do it quite simple. Now you do not need to throw out an old film and stick a new one, because you can simply clean and glue the same protection to the gadget. Use our advice and simplify your life!
Currently, the price of protective 3D glass for iPhone 6 is in the range from 900 to 2500 rubles. Most stores for an additional fee (usually 30-40% of the cost of the goods) offer their accessory to globify their accessory, but even they are not always able to do it qualitatively, that is why the right solution will independently carry out the installation of protective glass.
If you are confident in your skills and knowledge, but doubt the correctness of the selected solution, especially for you developed instructions for installing protective 3D glass on your smartphone, which consists of 6 steps. Instruction is suitable for protective glasses on iPhone 6 6swhich you can buy with us in the online store.
Wipe the screen with an alcohol napkin to remove fingerprints, dust and dirt from the surface of the smartphone. Then use a dry napkin from the microfiber, to remove wet particles of the cleaning agent.
Take a large blue adhesive tape to remove invisible dust particles, hair and crumbs. Alternately, apart and stick absorber. After completing the screen cleaning in step 1-2, carefully inspect the display of the smartphone, perhaps you missed something. If so, we recommend that you repeat step 1-2 to the perfect cleanliness of the surface.
Take the protective glass into your hands while holding down the edges, then carefully disconnect the preset black plate by pulling it down the sticker.
Apply the glass to the gadget at a distance of 1-2 mm, align the holes relative to the smartphone. Then slowly attach it to the display. This step needs to pay special attention, because It is on it that most newcomers are mistaken. Here you should not hurry.
Slightly push the index finger to the center of 3D glass for the iPhone 6. After pressing, the glass stick will automatically begin, which passes quickly. ATTENTION: After the glass pressed the entire surface to the smartphone screen, you can not press on its edges before you do not remove air bubbles.
Removal of air from under protect glass, which is not glued along the edge. Use yellow microfiber cloth to squeeze air bubbles. Your movements must begin from the center of the display and end in the 3D glass edge. Upon completion of air removal, click on the 3D edge of the glass, to end the stitching process.
Tips and Notes:
The quality of sticking depends on many factors: experience, knowledge, shaking hands, etc. If, as a result of the hole of the protective glass, do not coincide with the smartphones, we advise you to adjust the following steps.
Problem 1.
Most of the adhesive layer is located not only on the protective glass itself, but also on its 3D edges. If after completing the process of sticking the protective glass, it keeps on a kind word, it means only one thing, you are not smoothly stuck it.
Solving problem 1.
Disclosure from the display, thoroughly align the holes relative to the smartphone and repeat steps 4-6.
Problem 2.
After installing the glass, small air bubbles appear.
Probably, you made a glass of glass gluing not according to the algorithm, which is specified in step 5. Attached a force to the center of the screen, but to its 3D edge.
Solving problem 2.
Try to remove air particles by driving their movements from the center of the screen to its edge, if such actions do not lead to the desired result, open the protective glass and install it in accordance with increments of 5-6.
Do I need to glue a protective glass on iPhone 6? It is worth determining the purpose of such an accessory. If you often drop the phone or its operation takes place in aggressive conditions, where any mechanical effort can leave scratches or chips on the display, protective glass will minimize the damage to the smartphone screen. If you are carefully applied to the phone, the need to use the tempered glass goes into the background.
If you have questions about how to gently stick the protective glass on your smartphone, we will be happy to answer them in the comments. As a rule, newcomers often allow a large number of errors, due to which the protective glass is dugs on the iPhone 6. Carefully read our instructions so that the glass serves for a long time.
Details Online store blog Created: July 16, 2016Many buy smartphones of new models not only to enjoy all modern functions Such gadgets, but also to emphasize their status. And what style can we talk about if the screen scratched or he cracked at all. In order to prevent such possible troubles, almost every phone user uses a protective film for the display. Bubbles arise due to air, which falls under the surface of such a useful accessory as a film. It happens that the "defect" is formed due to a small dust, then the process is slightly complicated - you will have to change the entire film. In order for the first or re-stick the film onto your smartphone, you need to know how to remove bubbles from the phone film, because it is perhaps the only and main nuance in this matter. Today we will tell about it in more detail and try to bypass all obstacles.
Replacing the film
This procedure requires extraordinary caution and a high level of cleanliness in the room. It is best to carry out all manipulations in the bathroom, because due to the moisture, dust does not fly in the air. Done to the following:
- We take into the hands of a smartphone and smoothing the air bubbles that have arisen with fingers or other flat, but not sharp object. If nothing comes out, the film will have to rejuvenate and try to return it to the place again.
- Display mobile device It is best to wipe with a special computer napkin. The same napkin can be considered all the dirt from the old film.
- Now we take the device firmly into your left hand, hold the edge of the film with a thumb and gently stick it on the glass so that the air does not get under it.
If you were neat and your film is not very worn, then everything should work out without difficulty.
Safety glass
How to remove air from under protective glass? It is all a bit more complicated here, because unnecessary movements can disrupt the integrity of the protective accessory. We recommend that you familiarize yourself with the most common advice of advanced users of mobile devices:
- Use driver's license or a plastic card in order to "squeeze" air from under the surface of the glass.
- You can take advantage of the most ordinary needle, which is found at home. Take the needle and thread it under the places in which the air has accumulated. Conduct the procedure extremely gently - you need to raise the edge, and then tightly press it in such a way that the air can get there.
- If you have fishing gear at hand, you can use the fishing line. Persay the leafy accessories and lead it until the moment problem places will not end. It remains just to return the glass into place and gently press.
- Some experts recommend using a household hairdryer to correct defects. War down a glass of mobile device at a distance of 20-30 centimeters, put it down on the screen down on the smooth coffee table and leave under the press from books for the night. During this time, all the air should go out.
Important! You can also remove the glass in any of the listed methods and clean its surface with a scotch strip. Scotch will collect all the dust and fine trash, after which it is possible to glue the protection back.
To avoid problems in the future, we have prepared you a small list of recommendations:
- Do not conduct a sticking procedure if you have dirty hands. Rock the skin fat from your fingers, otherwise it will be able to "leave the traces" in the work.
- And protective glass, and the film is best replaced in a wet ventilated room. These precautions will help you avoid dust from entering the surface.
- Do not make a lot of effort during glass replacement, otherwise you risk breaking it.
- You can use the Dust Remover to remove excess dust.
- To remove bubbles, you can use the most common medical syringe. Grind "Nose" and pump out the air from under the surface of the film or glass.
