SMALL FREIGHT LIFTS SKG (BKG)

German made to measure according to customer requirements. These are modern small cargo lifts, or small elevators of increased reliability with technical characteristics and safety devices inherent in passenger or freight elevators in apartment buildings, private cottages, in shops and large shopping centers.
The range of application of small freight elevators, including their adaptation for any purpose, requires a serious approach when choosing a model of a small elevator.
Price for small, small freight elevators consists of the cost of the elevator in basic configuration a plus optional equipment... A small freight elevator can be assembled both for the kitchen of a restaurant and for use in kindergarten, hospital, or bank.

The commercial offer for small freight elevators, in addition to the price, includes an installation drawing of a small freight elevator with custom dimensions of the elevator car and minimum size shafts for the installation of a small elevator at the buyer's site.

BASIC AND ADDITIONAL EQUIPMENT OF ELEVATORS

Small freight elevators as standard:

The upper location of the controller and the winch, inside the frame of the elevator shaft, on its own supporting structures.

The frame of the elevator shaft is self-supporting steel made of galvanized profiles with a frame around the perimeter and T-shaped steel rails for the cabin without coating.

Cabin material - galvanized steel, type - not through passage, loading from one side on all floors (stops), with removable intermediate shelf made of stainless steel.

Vertically sliding, or external shaft doors are located at a loading height of 700 mm. The door material is galvanized steel.

Order control stations made of stainless steel with status indication, sound signal arrival and with the ability to send the cab from each floor (stop).

German small freight elevators SKG (BKG) are equipped with electronic control, for alternating voltage 400 V, 50 Hz electrical network. Moreover, their power is 0.75 kW. - 1.47 kW, this allows small freight elevators to be used as kitchen lifts in private houses, or in restaurants and cafes.

Drive (elevator winch) type H6, with disc brake and a temperature relay.

Small freight elevators as standard supplied without cabin catchers.

Additional equipment for small freight elevators:

An increase in the lift height, or the height of the shaft frame on the last floor (stop), in excess of the calculated factory standard.

Changing the type of loading of the elevator car at stops, from non-through (dead-end) to through loading at an angle of 180º.

Manufacturing of a stainless steel elevator car.

Equipping the elevator car with its own door to protect the contents from falling out if not loaded accurately.

Increase in the number of intermediate shelves.

Additional, fixed shaft doors to increase the number of loading windows (entrances).

Manufacturing of fixed shaft doors and machine room doors in stainless steel or fire resistance E30.

A set of security systems in accordance with GOST 53780-2010 R.

SMALL FREIGHT LIFTS DIMENSIONS

Loading capacity is 50 kg. - BKG 50.45 / 0 analog of ISO-A SKG

Min. elevator car 400x400x600 mm. (WxDxH) / min. elevator shaft 720x580 mm. (WxD)

Max. elevator car 600x600x800 mm. (WxDxH) / min. lift shaft 920x780 mm. (WxD)

Carrying capacity 100 and 300 kg. - BKG 100.45 / 0 100.45 / 1 300.30 / 14 analog of ISO-A SKG

Min. elevator car BKG 100.45 / 0 - 400x400x600 mm. (WxDxH) / min. elevator shaft 720x580 mm. (WxD)

Max. elevator car BKG 100.45 / 0 - 800x800x800 mm. (WxDxH) / min. elevator shaft 1120x980 mm. (WxD)

Min. elevator car BKG 100.45 / 1 - 400x500x600 mm. (WxDxH) / min. elevator shaft 720x680 mm. (WxD)

Min. elevator car BKG 300.30 / 14 - 400х700х800 mm. (WxDxH) / min. elevator shaft 720x880 mm. (WxD)

Max. elevator car BKG 100.45 / 1 BKG 300.30 / 14 - 1000х1000х1200 mm. / min. elevator shaft 1320x1180 mm. (WxD) (WxDxH)

Small freight elevators from Bunse-Aufzüge GmbH with a lifting capacity of up to 300 kg.
look in

ELEVATORS FOR RESTAURANTS

German small goods lifts SKG (BKG) occupy a leading position in the market of service small goods lifts for restaurants and cafes. Small freight elevators are used in banks, food and medical industries, wherever a small elevator is needed for small loads with high technical characteristics and an adequate price.
As direct suppliers of German elevator equipment, in particular SKG (BKG) freight elevators, we on the website have separately identified the direction "Elevators for restaurants" to show with examples how to choose the right small freight elevator for a restaurant kitchen, tell about the purpose of elevators in a restaurant and examples of projects we have completed, and help you choose the right small freight elevator for a restaurant kitchen, or a dumbwaiter for a cottage.

Small cargo elevator 100 kg is a silent, small-sized hoisting device for moving goods indoors.

The equipment is installed in a specially designed metal shaft or installation in an existing old shaft is possible.

Lifts are actively used in:

• medical institutions;
• laboratories and scientific centers;
• restaurants, cafes and other catering organizations;
• children's institutions and leisure centers;
• shops and trade centers;
• large libraries and archival funds;
• small production premises;
• administrative buildings;
• private low-rise buildings, etc.

Another name for small type elevators is service lift.

It fits perfectly into a small-sized room, which is good in terms of saving working space. With the help of an elevator, it is easy to deliver a ready-made dish to the desired floor from the restaurant's kitchen to the hall, serve books in the library at the right time, move dirty or clean linen to the laundry, etc.

Small elevators manufactured by RZGU have a number of advantages and benefits:

1. All lifting equipment is manufactured using modern technology using quality raw materials.

2. All materials and finished products are tested before use.

3. Elevators and hoists of our production are reliable and safe during operation, which is confirmed by certificates of conformity.

4. Each elevator or lift is made taking into account the individual characteristics of the installation and the wishes of the customer.

5. If there is no ready-made elevator shaft in the room, then it is not required to carry out construction work on its construction. All small freight elevators are supplied with a metal frame shaft as a set.

6. Design, production and installation of equipment are carried out in the shortest possible time.

7. Lifting equipment with a lifting capacity of 100 kg is economical to maintain and consumes a minimum amount of electricity.

The cost of a small freight elevator 100 kg is calculated from the following factors:

• carrying capacity;
• the size of the cabin;
• number of stops;
• lifting height;
• material of manufacture.

According to SANPIN standards, all cabins of service small elevators intended for medical and children's organizations, as well as for the catering sector, are made of stainless steel.

Small cargo elevator 100 kg is technical device which works silently. It is used in private residences, restaurants and other food service outlets, shops, industrial premises, rooms of food enterprises, etc.

Advantages of RZGU service elevators:

• High quality equipment (materials used are thoroughly tested before use);
• Reliability, safety of operation;
• Possibility of production taking into account the individual wishes of each client;
• No need for construction works for the installation of the mine, since the delivery of the metal frame mine is complete;
• Minimal consumption of electrical energy.

The price of a small freight elevator 100 kg is determined by many factors. The main indicator is the carrying capacity of the device, the number of stops, the lifting height are taken into account. The Rostov plant of lifting devices guarantees the quality and reliability of the supplied products. The structure of a freight elevator is comparable to that used in passenger structures. The difference is the presence of control buttons for a small elevator only on the floor, which prevents unauthorized use technical means... The cab configuration is different; incoming or from various sides. When determining this parameter, it is important to consider the architecture of the building itself. If the service elevator car is intended for transporting food, then it is made of stainless steel. In other cases, primed steel is used in production.

RZGU manufactures high-quality and reliable lifting equipment for any premises or business area.

For more detailed information about small lifts, contact the managers on the site.

Small freight elevator Is a special freight elevator of small dimensions (often called little freight elevators), which is designed to move various loads to certain levels, with a carrying capacity of 50, 100, 250 and 300 kg and a lifting height of up to 30 meters.

Despite its modest and small size, low-load elevators in their purpose and technical characteristics are not much different from freight elevators of higher carrying capacity.

Small freight elevators their application:

• Cafes and restaurants for moving ready meals and used dishes.
• Canteens for lifting vegetables, food, semi-finished products.
• Small warehouses and storage facilities for moving various products.

Currently, little freight elevators have become very popular in country houses, cottages, especially where there is a basement, and the transportation of vegetables and products is carried out directly to the kitchen or dining room. .

Manufacturer's choice

Small freight elevators Russian manufacturers KMZ, ShchLZ models pg-0225, pg-0125m, pg-239 differ, first of all, by low cost, short production time and ease of operation.

Small freight elevators are produced with a carrying capacity of 100 kg and 250 kg, mine doors are hinged and sliding, the cabin has a through and non-through type of loading.

Well-known European elevator manufacturers such as SKG and BKG, have recently become a significant competitor Russian companies where design and various options play a decisive role in the choice of equipment.

Small freight elevators SKG and BKG are leaders in the sphere of catering and service, especially if it is related to the restaurant business (see).

An important choice elevators SKG and BKG is all sorts of sophisticated requirements of the future buyer, which allows you to choose an elevator for yourself, ideally fit into the interior of the building.

Small freight elevators BKG and SKG Unlike domestic producers are available on request with load capacities of 50 kg, 100 kg, 250 kg and 300 kg and are supplied with a galvanized self-supporting shaft. Loading and unloading can be carried out from one, two or three sides, including elevators with two levels of cabins.

Cab trim is made of stainless steel (mirror or textured), and is also supplied in standard configuration made of galvanized steel or powder coated in grey colour RAL.

Small freight lifts can also be produced with hydraulic type drive, which is presented European manufacturer Hidral, where voltage from a conventional 220 W network can be applied. A small freight elevator with a hydraulic drive type is primarily used where the requirements for noise and smooth running are increased.

Small freight elevators cost (price)

Cost (price) for small freight elevators largelydepends, first of all, on the manufacturer (domestic or foreign), the number of floors, and various additional options.

Elevator equipment used in all multi-storey buildings is a complex mechanism consisting of various elements. In order for the elevators to work properly and not cause inconvenience to the people who use them, it is necessary to carry out maintenance and replacement of spare parts in a timely manner. In our catalog, you can easily pick up spare parts for scheduled or emergency repairs of any complexity.

Breakdowns can occur for various reasons: normal wear and tear, power failures, lack of proper maintenance, excess weight, etc. Regardless of what caused the malfunction, you can order lift parts from our company.

We have over 8000 items of goods. We supply spare parts and elevator equipment of Russian and foreign manufacturers

• Karacharovsky plant KMZ;
• MogilevLiftMash MLZ;
• MEL;
• Shcherbinsky Elevator Building Plant ShchLZ;
• OTIS;
• Sikor;
• ENCODER;
• Montanari;
• DOPPLER, etc.

The range includes both original and high quality analog spare parts.

Also in our company you can profitably purchase elevator equipment. We can deliver you equipment from Russian and foreign manufacturers.

Qualified assistance of specialists

For a convenient search for spare parts, the catalog is divided into sections, so finding the necessary parts is usually not difficult. But if you could not find the positions you need or need advice, contact our employees for help. The Zaplift company employs qualified specialists. They can:

• pick up spare parts for a certain type of elevator equipment;
• pick up elevators taking into account your goals and budget;
• advise on issues technical characteristics or features of the sold parts;
• answer questions regarding price, payment or delivery time.

Our high professionalism is confirmed by repeated participation in exhibitions, receiving awards and diplomas. We practice an individual approach and are ready to offer profitable terms cooperation on a one-time or permanent basis.

Our other advantages

The Zaplift company is located in Moscow, but our sphere of activity covers the whole country. Delivery of the purchased goods is carried out to all regions of Russia. We successfully cooperate with leading transport companies. Delivery to the transport company is free, and then according to the tariffs of the selected carrier. Since we cooperate with several shopping malls, you can choose the most convenient and profitable option for yourself. Delivery times depend on the remoteness of the region and the transport company.

Well-established cooperation with trusted suppliers and manufacturers directly allows us to adhere to a competitive pricing policy. Wherein elevator parts differ high quality and reliability. We supply only those parts that have passed the test, because we perfectly understand the consequences of the use of low-quality spare parts for elevator equipment. We care about the safety of people and monitor the quality of the supplied products.

For your convenience, we have provided various options for placing an order. To order parts, you can use the form on the website, send a request by e-mail or fax. We process applications promptly and do not delay sending the order to transport company to shorten delivery times.

Zaplift is your reliable supplier of elevator equipment and spare parts for elevators from Russian and foreign manufacturers!