The Ulyanovsk-made UAZ Patriot car is designed to operate in the harsh off-road conditions, but before leaving for such tests, you should think about some unprotected structural parts of the SUV. One of those places that are unprotected and can be damaged while overcoming various obstacles are the tie rods. Therefore, the issue of protecting the steering rods on the UAZ Patriot SUV remains topical, because if they fail, there is a possibility of developing various adverse consequences: from entering a ditch to a collision with an oncoming lane. Therefore, today we will consider what is the protection of steering rods, as well as protection of the engine crankcase, gearbox and transfer case.
To protect against mechanical damage steering rods, car owners of the famous SUV install special elements. These elements act as protection for the steering rods on the UAZ Patriot SUV. There are two types of such elements:
- one-piece construction;
- welded structure in the form of ribs.
Continuous protection of steering rods is a solid steel plate 3-5 mm thick, which can be purchased at a UAZ car service. The mass of such a plate is about 10 kg, and the ease of installation allows you to install the product yourself at home. Thanks to its one-piece design, the product protects steering rods not only from mechanical stressbut also from dirt, water and dust. In this case, the protected area remains clean for a long time. But the disadvantage of a steel plate, even 5 mm, is that it is not able to protect in case a large stone is caught in the way or a steel structure. The cost of such a product for steering rods in the form of a one-piece structure is about 3 thousand rubles.
One-piece protection fulfilled its function
The steel plate protects not only the steering rods, but also the engine, gearbox, gearbox and other elements that can also be damaged as a result of off-road driving. Such protection provides for installation in regular places and does not require any new revision. In order to ensure a long service life of the product, it is treated with a special anti-corrosion agent. In recent days, it is increasingly common to find on the Patriots a crankcase guard made of Kevlar or composite. The main advantages of these crankcase protection materials are:
- light weight;
- resistance to corrosion;
- reliability and durability.
The welded guard is a steel tube structure that not only protects some parts of the car, but also allows it to be hung. But steel pipes are not able to keep out water, dirt and dust. But if we talk about protection, then the welded structure protects against large stones and other types of obstacles that can cause serious damage to the car. A welded structure costs about 5-8 thousand rubles, which depends on the diameter of the pipes, the quality of the steel, etc. A drawing or diagram of a welded structure for an SUV is shown in the figure below. It is only worth noting that the indicated dimensions are conditional and when making a structure, you need to take into account the dimensions of your car.
Recently, a combined one-piece and welded structure has been used to protect the steering rods on the UAZ Patriot. But the disadvantage of such a system can be called high cost, great weight, complexity of installation and manufacture. Therefore, comprehensive protection of steering rods of the UAZ Patriot SUV is rare.
Crankcase protection and pk
As you know, the crankcase on a UAZ Patriot is the lowest point of the engine. Against this background, it is imperative to provide for the installation of a crankcase protection, as well as a pk, in order to exclude their damage and thereby disable the motor and hand-out. If the welded structure of pipes is not able to provide protection of the crankcase and pk from dirt and water, then the one-piece one protects even from such negative influences.
This is what tank protection looks like
If a decent boulder or stump gets in the way, then the one-piece crankcase protection may not withstand such a load and be damaged. As a result, it will be necessary to replace the product with a new one, but at least you will protect yourself from the cost of repairing the crankcase or what is worse than a pk or gearbox.
The protection of the crankcase and pk from mechanical stress can also be ensured with the help of welded pipes, but at the same time it is necessary to take into account that you will need to make the product yourself. In addition, if you install a solid steel product, then, thus, the clearance of an SUV will be reduced by 2-3 cm.When installing a welded structure, the lower point of an SUV will be reduced to 5-6 cm, which is extremely undesirable for a car such as the UAZ Patriot. ... Therefore, car owners often resort to installing protection for steering rods, crankcase, gearbox and transfer case using factory-made solid steel products. Pipe products are installed immediately behind the bumper, which is additional protection.
Manufacturing a part
Installation
Consider the process of installing protection for steering rods, crankcase, gearbox, transfer case. Installation of such a structure is the following sequence of actions:
- The fixing of the product is carried out in the standard holes of the car frame. The front of the product is secured in the area of \u200b\u200bthe towing lugs.
- The rear is secured by the anchoring eye brackets.
- Thus, the main guard is secured with four (five) bolted connections.
But here it should be noted right away that the mounts depend on the product model. After all, such manufacturers as Protex, Sheriff, Reef and others are known, differing not only in types, but also in quality.
The photo below shows what is the factory Protex steering rod protector.
Crankcase protection against domestic manufacturer manufactured on high-precision technological equipment using model patterns. Thanks to this, for each specific car model, you can choose the perfect "pair". An integrated approach, use innovative technologies and high-quality materials endowed steel crankcase protectors from AutoBronya with a number of the following advantages:
- The ability to use on cars of domestic and foreign production.
- High structural strength due to the presence of stiffeners and the tests that accessories are subjected to during the production process.
- Accessories provide reliable protection of the engine compartment from the bottom of the car.
- The use of protection does not interfere with the functioning of the main mechanisms.
- They act as additional noise insulation; during operation, they do not create third-party noise.
- They withstand high temperatures, do not deform or break under the influence of negative factors.
- Easy installation, which is due to the coincidence of fasteners with standard holes.
- Availability of technological holes for easy replacement technical fluids and oils. This saves time and effort by eliminating the need to dismantle the protection.
Each unit of products meets high international quality standards and meets the requirements that are regulated by the quality management system ISO 9001: 2008.
The Rival company was founded in 2006 and since then it has been actively developing. At the moment, the company is the leading russian manufacturer protective and decorative accessories for a wide lineup cars. Initially, the production facilities of the enterprise were located in Yekaterinburg, today - in Moscow, Nizhny Novgorod, St. Petersburg, Kazan and the city of Bogdanovich.
At the dawn of its operations, Rival was engaged in the implementation of staff and additional light, as well as the production of high-strength steel crankcase covers. Already in 2008, the company bought a manufacturer of modern anti-theft systems - the Barracuda brand. In 2010, the brand's assortment was replenished with a new product - crankcase protection, which was made of lightweight but durable aluminum.
RIVAL company additionally provides production services such as:
- Stamping;
- Laser cutting of metal;
- Welding works;
- Bending of steel and aluminum sheets;
- Powder coating.
2010 was a significant year for the brand, as it successfully passed the ISO 9001: 2008 quality system certification (to this day, the company confidently confirms the compliance of its products within the framework of annual audits). In the winter of 2016, the company's production base was audited and received a certificate of conformity ISO / TS 16949.
The production of underbody protection for ATVs started in 2011, and in 2013 the brand's products entered the markets of Australia, the Middle East and Europe. The conquest of new markets is due not only to the exceptional quality of products, but also to the emergence of new production line goods - hood shock absorbers (2014). The following year, the company began supplying its products to automobile conveyors, which was facilitated by the opening of a wholesale department.
Delivery in Moscow and the region
Pickup
Address: Moscow, Lobnenskaya st., 21, 2nd floor, office 221. To avoid unpleasant situations associated with the lack of the desired product in the warehouse, please call in advance and reserve it.
Courier delivery in Moscow and the Moscow region
- Delivery cost: 300 rubles (from 10,000 rubles - free)
- Delivery cost outside the Moscow Ring Road: RUB 300 + RUB 20 for 1 km.
Regional delivery
Delivery by Russian post (cash on delivery - payment after receipt)
Postal delivery in Russia - from 250 rubles. (The cost and delivery time depends on the region, weight and declared value of the parcel)
Delivery transport company
- Delivery cost from 400 rubles. (depends on weight, dimensions and declared value of the order).
- Delivery to transport companies - PEK and Business lines is free! Delivery cost to other transport companies is 300 rubles!
Delivery by CDEK service
- Delivery to the pickup point (more than 500 cities)
- Delivery to address
Lattice protection for Patriot
Despite the makings of a full-fledged SUV, the UAZ Patriot, nevertheless, has unprotected places that can be easily damaged due to external influences. One of these vulnerabilities in the car was discovered steering... Therefore, the protection of steering rods of the UAZ Patriot is a rather urgent issue among the owners of this car.
The relevance of the issue of the safety of steering rods lies not only in their good condition and performance. rules road traffic do not allow the vehicle to be used if there is any steering malfunction. And as you know, bent tie Rod does not allow the vehicle to keep in a straight line, which can lead to any serious consequences. If severely damaged, drive vehicle it will become impossible at all.
Steering design
Before proceeding with the protection against external influences of parts, it is necessary to remind what constitutes the steering of the UAZ Patriot. Schematic diagram includes steering gear worm-type with hydraulic booster, cardan transmission and a tilt-adjustable steering column.
The steering linkage is traditional for this class of cars. The rotation from the steering wheel is transmitted to a short thrust and right wheel... Further, through a long rod, the right, in the direction of travel, the front wheel is rotated symmetrically.
Despite the fact that the tie rods are not the lowest point under the car body, the likelihood of their damage is quite high. This is facilitated by the placement of UAZ rods. They are located slightly in front of and higher from front axle and are clearly visible when viewed from the point of view at the level of the front bumper.
Thus, when driving off-road, this element of the car is almost the first to meet all the dangerous obstacles on the road. A particular threat is posed by thick sticks lifted by wheels, flat and pointed boulders.
Installation options for protective elements
One of the first additions that owners install on their UAZ SUV is an additional protective element for steering rods on the UAZ Patriot. Among the possible types of such protection, there are two main types:
- installation of solid metal protection;
- fabrication and installation of a welded tube frame.
Each of possible options has certain advantages and disadvantages:
- Solid metal protection
The largest number of proposals relates to all-metal protection with a thickness of 3 mm, in some cases - up to 5 mm. The weight of such a part is from 10.5 kg. Some of the features are simplicity of design and ease of installation.
The package contains not only installation instructions, but also a set of fasteners.
An additional advantage is the relatively low cost of this protection option. If you can install such a metal sheet yourself, then all costs will consist only of the acquisition costs. As a rule, such protection does not exceed RUB 3,000. Keep in mind that with an increase in the thickness of the metal, the cost also increases proportionally.
Solid steel protection
Although the protective sheet has some stiffening ribs, the indicated thickness will not reliable protection from a large stone. In addition, it has been observed that the steel sheet is capable of picking up dirt when driving. in reverse, not only accumulating it, but also contaminating other units and parts.
- Welded pipe protection
Such protection of steering rods for UAZ is a more reliable and massive version of the safety device. The welded structure, thanks to the thick pipes used, allows the car to even hang out on this protection. By attaching to the frame and tilting towards the front axle, the protective element partly acts as a guiding device when the vehicle is moving, which allows it to drive out of the mud.
The greatest disadvantage of such structures is the complexity of the installation, since it is necessary to additionally prepare the mounting locations. When using more severe protection, many owners over-reliance on its fail-safe design, resulting in unexpected damage to the steering from the bent tubes of the structure.
In addition, long elements, for example, fallen trees, can easily penetrate into the gaps between the pipes, which also easily damage the steering rods of the UAZ. Depending on the height and shape of the protective structure, as well as the depth of the track, when reversing, this structure not only pulls the mud back, but also significantly reduces the possibility of the car rocking when trying to get out of the mud.
It can be noted that the owners of UAZ vehicles, who had experience in installing both protective structures, propose to combine both types to increase efficiency. This means that the main load-bearing element should be a welded structure, and a solid steel sheet will provide protection from dirt and long protruding obstacles on the road.
It should be noted that the difference in price for different types protection and taking into account its constructive performance can be quite significant. The named cost below 3 thousand rubles for basic protection can increase up to 9 thousand with an increase in sheet thickness and exceed 10 rubles, depending on the fastening scheme, for welded pipe protection.
The installation cost is usually about 10% of the cost of the installed structure.
An important remark that needs to be made before choosing protection should be non-interference in the design of the steering system.
UAZ for its technical and running characteristics designed for off-road, however, not provided by the manufacturer additional protection of all components and assemblies. To 100% use the potential of this "beast", you yourself must take care of the vital "organs" of the car.
Protection for UAZ - your insurance against accidents
Off-road in itself implies driving at the limit of possibilities, but the main danger is a large number - irregularities, holes, stones, steep climbs, all these "delights" can lead to an emergency stop, breakdown and costly repairs. To avoid sudden financial costs, we recommend that you buy and install a specially made protection for UAZ.
Protective bumpers
In our online store you can purchase protection for the front and rear bumper UAZ. These products not only protect the standard bumper, they are also able to minimize damage in the event of a frontal or rear impact.
Crankcase plate
Everyone knows that feeling when you enter a hole and you hear this grinding, it tears your soul, then you get out of the car and look if the crankcase is broken and for a long time while driving you involuntarily glance at the oil pressure indicator. Do not tempt fate, the crankcase protection for UAZ will protect the heart of the car from oil starvation and save your nerves.
How to protect steering rods
Most car owners do not think about protecting the steering rods of the UAZ until they bend 1-2 about a stump, log or other obstacle. This is not the cheapest part, and replacement requires certain skills and time. It is much more practical and more reliable to order protection for steering rods for UAZ in our online store. These products are installed flush with the steering rods and do not affect the vehicle's ground clearance in any way.
Headlamp grilles and turn signals
In the online store "Potrebsoyuz" you can order protection of the front and rear lights for UAZ, separately for lights and turn signals. They will protect the optics from most of the small objects - stones, spikes, etc., as well as from possible impacts.
If you are going to conduct assembly work by yourself, you will need it, you can also choose and order it in our online store - just follow the link.
All protective elements presented in this catalog are made of durable materials and have all the necessary fasteners. You can install it yourself. Wherever you are, in Moscow or in any other city of Russia, in our online store you can buy UAZ protection for any part of the car. These precautions will pay off over time and save you money on costly repairs.
Patriot, first of all, is designed for off-road operation. But, as always, not everything is thought out in the domestic auto industry, so immediately after buying it is not worth trying to test the car off-road and in harsh conditions. And even on such an SUV as the UAZ Patriot, off-road driving threatens to meet with a lot of troubles. Of course, every owner wants to extend the life of his car as long as possible, he will have to take care of its protection. In addition to possible external damage in the form of a bumper or body, steering rods of the UAZ Patriot are most often damaged.
The relevance of the issue of the safety of steering rods lies not only in their good condition and performance. Traffic regulations do not allow the vehicle to be used if there is any steering malfunction. And as you know, a bent steering link does not allow the car to keep a straight trajectory, which can lead to any serious consequences. In case of severe damage, it will become completely impossible to drive a vehicle.
TYPES OF STEERING ROD PROTECTION
- installation of solid metal protection;
- fabrication and installation of a welded tube frame.
Each of the possible options has certain advantages and disadvantages.
Solid metal protection.
TO positive side include: protection against mechanical damage, moisture, dust and dirt. But, this structure will not be able to prevent damage in the event of a collision with a boulder or a metal structure, even if the sheet thickness is 5mm. In addition, it was noticed that the steel sheet is able to rake in dirt when reversing, not only accumulating it, but also contaminating other components and parts.
Welded pipe protection
Such protection of steering rods for UAZ is a more reliable and massive version of the safety device. The welded structure, thanks to the thick pipes used, allows the car to even hang out on this protection. By attaching to the frame and tilting towards the front axle, the protective element partly acts as a guiding device when the vehicle is moving, which allows it to drive out of the mud. The disadvantage is the higher cost. And it depends on the frequency and size of the installed pipes, the quality of the metal. In addition, long elements, for example, fallen trees, can easily penetrate into the gaps between the pipes, which also easily damage the steering rods of the UAZ.
