The pressure in the tires of KIA RIO, as well as in other cars, must be maintained at a certain level and regularly monitored. But for some reason, everyone remembers about such a parameter as the pressure in the cylinders of a car only twice a year, and then not on their own, but when replacing summer tires for winter or vice versa.
As a rule, a tire service worker is interested in: how much to pump up the wheels of the car? And really, how much?
The answer is very simple: all modern cars have information plates that can be located on the fuel tank hatch or in the opening. driver's door... On the Kia Rio, a similar sign is located in the doorway. And there, although not in Russian, it says that the recommended tire pressure is 2.2 bar.
The tire worker is not in vain interested in what pressure you would like to operate the wheels. There are many folk wisdoms that relate to this issue.
For example, they say that inflated tires allow this. Partly, this is true. Over-pumped tires have more slope, so the car accelerates faster and rolls longer on them.
But, there is one "BUT". You will, of course, save gas, but the tires will wear off much faster than they should. And if in the end we calculate whether there is any savings, then it turns out that there is no. Because a set of high-quality rubber for vehicle now it's not cheap at all.
At the same time, the optimal pressure in the rear rims kia Rio is 2 bar. This difference is made so that when accelerating over 120 km / h, the rear of the car does not start to lift off the ground and wiggle from side to side. This is exactly what happens if the wheels are inflated by more than two atmospheres, and rear seats and the trunk is empty.
But even less than the specified number of them should not be downloaded. Otherwise, the rate of rubber wear will increase. The less inflated the tire, the faster it wears out. After all, these two parameters are directly proportional to each other.
In addition, the picky reader has probably already guessed that if the car is heavily loaded, then the wheels should be pumped up a little more than the optimal values. In this case, excess weight neutralizes the increase in the number of atmospheres.
In our online store, you can match your parameters! More than 6000 tire models, delivery across Russia, the best brands in the world!
How often should the tire pressure be checked?
What pressure must be in the tires Kia rio, we have already figured out. Now you need to figure out how often it needs to be checked, and what factors influence its decrease.
Factors affecting the decrease in the amount of atmospheres in the wheels of a car.
If you inflated the wheel on a bright sunny day to the limit you need, this does not mean at all that the pressure will be kept at a certain level constantly. During the day, the air temperature is higher, and at night it drops. The same thing happens in the tires of a car. Consequently, the pressure will drop by a few tenths of a bar.
The maintenance of the tire pressure also depends on the quality of the rubber mounting, and if there are micro-holes, then the value will also decrease.
Air from the wheels also escapes through the pores that are present in it. The older the rubber, the more pores.
Based on the foregoing, it is worth checking the tire pressure at least once every two weeks. In addition, it should be increased or decreased for different modes of vehicle operation.
The optimal tire pressure for the Kia Rio is 2-2.3 bar. If you care about the safety and longevity of rubber, you should not chase the mythical benefit in the form of saved gasoline. Keep the pressure level within the manufacturer's recommended limits. After all, this has a great impact on driving safety, making the behavior of the car predictable.
An indicator such as tire pressure must be constantly monitored by the owner of any car. This is also true of the Korean bestseller Kia Rio. It is no secret that the majority of drivers neglect the need to maintain the corresponding pressure at the manufacturer's level. Some car owners remember this and an important parameter once a season, and then when changing tires. Everyone remembers the standard question of the tire fitter: how much to swing the wheels? But the question is interesting, isn't it?
The answer is obvious here, because modern cars have special plates attached to the fuel filler flap or in the driver's door opening. In Kia Rio, this tabular artifact is located in the doorway. The information is not given in Russian, however, it is not difficult to guess from the numerical expression of the required wheel pressure value - 2.2 bar. Remember the installation point worker's question? It is not accidental, since a sufficient number of folk wisdom revolves around this topic.
Some are inclined to argue that when the tire pressure is increased, they are not able to save fuel. In some respects, this is true, since the pumped tires are endowed with better slope, allowing you to accelerate with less energy. Also, there is a "BUT" here. Saving gasoline, will you calmly watch the tires wear off intensively? Probably not! As a result, we have no fact of any savings. Note that a set of tires with excellent quality is now very expensive and the penny saved on gasoline is not worth it.
Again, for the Kia Rio, the manufacturer recommends adhering to a wheel pressure of 2.2 bar. For the front tires, this is an axiom, since the maximum load is imposed on this axle, due to the weight parameters of the engine and transmission.
For stern wheels, the optimum tire pressure is 2.0 bar. This is a targeted recommendation that allows the Kia Rio to not run the risk of stern walking around when accelerating over 120 km per hour. It is this negative effect that occurs if the pressure in the wheels is overestimated, and the landing row of the stern and the luggage compartment will be empty.
Also, you should not underestimate the pressure in relation to the declared indicator, which is fraught with increased wear of the tire tread. The less we inflate the tire, the more intensive its wear.
Some picky readers, most likely, have guessed that there is a need to pump up the wheels of the KIA Rio in excess of the indicated limits in cases where the vehicle load is expected to be close to the maximum limit. Here, with the help of excess mass, the leveling of the overestimated air pressure inside tires.
How often should the pressure be monitored?
We have already figured out what amount of pressure should be present in the tires. Now we will determine the necessary need and frequency for monitoring this important indicator.
Note that there is a certain list of factors that can have a direct impact on the increase in operating pressure in the KIA Rio tires.
Among them:
- When the wheel is inflated in hot weather to the designated limit, then this fact is not yet able to mean that the pressure value will remain unchanged. At night outside temperature lower in comparison with the daily characteristic. The pressure in the wheels "worships" the same law, dropping by an insignificant amount.
- Also, the tendency of the tire to maintain constant pressure is influenced by its condition and quality. installation works... The presence of microcracks in the tire body or along the line of contact with the rim provokes minor leaks, which is accompanied by a decrease in the value of the internal pressure.
- We should not forget about the aging factor of rubber, which implies the formation of porosity, and this is also an "excellent" opportunity for air to penetrate outside.
Let's sum up
Based on the foregoing and in order to maintain the optimal air pressure in the tires, its value should be monitored at least once every two weeks. As we have found out, the optimal variation in values is 2.0-2.3 bar.
We do not recommend to arrange a pursuit of mythical fuel economy, but to save expensive tires as much as possible. Maintain the pressure in the KIA Rio tires in accordance with the standard factory values, only in certain cases resorting to the need for minor adjustments. This will allow you to feel confident in various driving situations.
Sooner or later, every driver thinks about the pressure in the tires of the car "Kia Rio", "Sorento", "Sportage" or any other model Korean manufacturer is optimal. Each mode of pumping rubber on the wheels affects many characteristics when driving: softness of control, gas mileage, and so on.
Most often about tire pressure in cars manufacturer Kia written in the opening of the driver's door. The normative indicator is also spelled out in the instructions and in order to avoid creating emergency situations on the roads must be respected. However, under certain conditions, increase or decrease the inflation rate of rubber in "Sorento", "Serato" and others Kia brands it is still possible. You only need to remember about these properties of under- or over-inflated tires:
- change in fuel consumption;
- wear of tires;
- the risk of an accident due to changes in maneuverability on the road.
Checking the pressure in Kia tires Rio Consequences of non-compliance of rubber with the standard
It should be noted that if you want to avoid many problems with the operation of the Sorento, then you do not need to allow the pressure in the wheels to drop by 15% or more relative to the standard value.
Not only does it not make sense in terms of change technical characteristics car, but can also cause a traffic accident. To know for sure if underreporting would be beneficial normative indicators pumping the wheels at the "Kia Rio" or Sorento, you need to consider all the consequences of such a decision (the pressure deviation from the company's norm is indicated in the range from 5 to 15%):
- an increase in the surface of the tire that is in contact with the road surface. Contact with road surface the tires on the Sorento start from the side, which is not provided for by the rules for the operation of road tires;
- the load on the Sorento's tread also changes. When the rubber is deflated, it begins to wear out at the edges, and the process itself is accelerated;
- reduced wheel elasticity. This is felt by passengers and the driver, as they rarely feel bumps on the road, easily overcoming bumps. At the same time, the load on the Sorento suspension components is reduced;
Wheel pumping KIA Sorento - increase braking distance Sorento, reduced handling (imperceptible at low speeds);
- the increase in rubber area is also the reason for the increase in gas mileage, although not very noticeable to the driver.
So, if you lower the pressure in the Sorento tires, you can get more ride comfort, longer suspension life, and better braking performance in poor road conditions.
However, the tires on the Sorento will wear out much faster, the gas mileage will increase, and you will need to drive more carefully.
Kia Recommended Wheel Pressure Table Some car enthusiasts believe that pumping the wheels on a Rio, Sid or Sorento model will help them save fuel. This is actually the case, but the savings do not exceed 5%.... Other consequences of pumping wheels on the Sorento are:
- rigidity and a subsequent decrease in the comfort of traveling in a car;
- increased suspension loads;
- less vehicle control, including braking;
- rapid wheel wear due to a decrease in the contact surface.
As you can see, pumping car wheels is also fraught with consequences - you will have to prematurely contact the service station to repair the chassis, as well as replace the rubber.
Tire pressure is one of the most important attributes safe movement by car. Precisely safe, since its overabundance or deficiency can significantly affect the handling of the car. And in emergency situation it can be very insecure. Therefore, the optimal indicators of the atmospheres in the wheel will help not only save yourself from trouble, but also save on new parts for the car. And you will have to buy them, since chassis and rubber will become unusable if the correct indicators are not adhered to.
Measurements can be made using pressure gauges.
They come in several varieties:
- electronic;
- mechanical;
- rack and pinion.
Each individual device differs in its class of clarity. For more accurate measurements, it is recommended to take more expensive models that have a slight error. These pressure gauges include electronic devices... Their only drawback is that they have an unreliable plastic case and need batteries.
Well inflated tires
Almost no one uses rack meters, as they are very fragile and inconvenient to use. Mechanical models, although cheap, often show incorrect readings. Therefore, when choosing a measuring device, it is better not to save money, but to buy a high-quality and reliable item.
Kia Rio X-Line fans know that the optimum tire atmospheres should be 2.2 bar.
Many car enthusiasts have no idea where to find information on the correct metrics. And that's why they don't bother too much about the number of atmospheres in the wheel. But this cannot be done, such carelessness can lead to problems with the car.
The Rio's manufacturer's recommendation label is affixed to the driver's door. There are indicated the norms that must be adhered to. They fit 15 '' and 16 '' wheels. Measurements should be taken at least once a week. In this case, not only the four wheels are checked, but also the spare wheel.
On a note.
However, they differ depending on the size of the wheels and the brand of the car. But the average pressure in the wheels of the Kia Rio is 2.2 bar.
Basically, all Kia models have the same values for both the front and rear wheels. But some cars deviate from such parameters. Minor deviations from the norms can be done if it is really justified. V winter time you can slightly reduce the amount of air in the tire. This will help to gain more grip of the tire with the road surface and increase ride comfort. But it is not worth keeping the lowered indicators for a long time, since the tire will wear out unevenly, which will lead to its damage.
Kia Tire pressure sensors Kia Sportage 4
Some cars already have a built-in system for monitoring the amount of air in the tire from the factory. This system is called TPMS.
It consists of four sensors, which are mounted inside the wheel, and an electronic panel for data output. If there is no such system on the car, then it can be purchased separately and simply installed on the car.
Original sensors specifically for Kia TPMS Tire Kia sportage 52933-D9100 can be purchased at a car dealership or ordered online. Their main function is to automatically measure the number of atmospheres in the tire. The system also monitors the temperature inside the tire. If in any tire it detects a decrease in air, then a lamp on the electronic panel lights up, which signals a problem.
On the panel you can see which wheel needs pumping. After fixing the problem, the light stops blinking and the system works normally again.
Note!
If the system is not built into the vehicle " Kia Sportage”, But is installed independently, then only a specialist should configure it.
It is also possible to install an indirect measurement sensor on the tires. This system is cheaper, but does not always show the correct readings. It reads indicators from the number of turns of the tire and its volume. All data are displayed on ABC ( on-board computer). If there is a violation of the control parameters, then thanks to the indicator and sound signal the system notifies the driver of violations. Its plus is that it does not require additional elements and details, therefore it is easy to use.
In the very last place in terms of accuracy are mechanical sensors-caps. They are cheap and screw on the nipple instead of the cap. As the amount of air in the tire changes, so does the color of the cap. If it is yellow or red, then you need to urgently take action and pump up the tire. And if the cap is green, then everything is in order. The disadvantage of such controllers is that they can be easily stolen and can only be observed visually. No readings are transmitted anywhere, since there is no automation.
Mechanical sensors Kia wheel pressure on different models
"Kia Optima" on R15 wheels has a pressure of 2.3 bar. These are the most optimal indicators that are recommended by the manufacturer. V summer time when, due to the heat, the number of atmospheres inside the tire increases, you can deliberately reduce the pressure, but only by 0.2-0.3 bar.
On plates with indicators of tire inflation rates, the designations KPa or Psi are often used instead of Bar. Therefore, a plate with the translation of such units of measurement can be found on the Internet. Typically, tire pressure gauges are measured in Bars, so otherwise the driver may get confused and inflate the tires incorrectly.
"Kia Cerato" on tires of 15 and 16 inches has a designation rate equal to 2.1 atmospheres in each wheel. At the same time, there is no need to deviate from such indicators, since the car drives quite smoothly and pits with potholes are almost not felt when driving.
Newer Kia Sid models already have different pressure standards.
On 15- and 17-inch tires, the recommended reading is 2.2 bar. Some drivers find it easier to drive as the pressure rises. Plus, fuel consumption is significantly reduced. This may be so, but you should not joke with the increase in norms. Due to incorrect indicators, the middle tread on the tire is quickly erased, so the tire will have to be changed. And it costs money.
In models " Kia Sorento»The pressure varies depending on the size of the tires. For 16-inch tires, the optimum performance is as much as 2.5 bar. This is a fairly high rate of pressure. With an increase in the diagonal, the indicators do not increase, but, on the contrary, decrease. For R17 tires, the norm is 2.2 bar, and for R18 tires it is already 2.3. So when replacing wheels with a Kia Sorento, it is worth considering the pressure discrepancies for each tire size.
Tire Pressure Units Table "Kia Spectra" has pressure standards equal to 2.0 bar for all wheels. With increasing load, the readings change in the tires of the rear and front axles. At maximum load of the car rear wheels it is necessary to pump up to 2.2 bar, and the front ones - up to 2.0. After all, it is the rear tires that experience increased stress with increasing weight.
Kia Soul Fans " Kia Picanto»Should be aware that the pressure readings directly depend on the size of the wheels. R13, R14 and R15 tires have the same performance of 2.1 atmospheres. But already in new car models released in 2011-2014, different indications are provided for the front and rear wheels... Tire sizes R14 and R15 must be inflated to 2.1 bar at the rear and 2.3 bar at the front. Moreover, these are optimal indicators typical for an unloaded vehicle.
Check the pressure regularly. This not only guarantees the safety of parts, but also ensures the safety of the driver and his passengers during the trip.
