Now many developers in the field of automotive accessories are aimed at increasing the comfort of car operation.
One of these accessories that is increasingly becoming popular is the device for automatic lifting of the door glass when the car is set to the alarm, it is the same module of one-sided closing of glass doors.
In the people, such devices received the name of the closers of glasses.
The usefulness of the use of the closers is obvious, the owner of the car before performing the latter signaling does not need to be checked, whether the windows are closed, since these devices will be closed automatically.
Initially, the closers of glasses were completed only premium cars, and only in the top-end configuration.
Over time, many drivers appreciated the favor of this device, which led to the emergence of universal closers, which can be installed almost any car.
In addition, some car owners familiar with radio electronics began to collect homemade devices that are performed very well.
Pillar Closer - What is the way it works
Car window closer is the electronic unitwhich connects to or central locking, as well as the glass control system.
The automotive accessories market does not suffer from the deficiency of glass closing modules. In the main one, they are produced by firms engaged in the production of security systems for cars.
SAME popular manufacturers The closers are Sheriff, Pandora B Tiger, although quite and other manufacturers.
Select car closers are not so difficult. First you need to decide for the closure of which amount of glasses should be given this module.
All this needs to be done because devices producing the closure of two glasses, as well as four.
So when choosing should consider whether there are glass control systems on the rear doors.
By this criterion, they are divided into:
- Simple single-functional;
- Multifunctional.
Simple devices are capable only to close the glass when making a car. But the multifunctional is able to memorize the position of the windows before closing and after removing the car from the alarm to return them to the same position.
Also, they can return the glass to its original position, if when it closes it burst into an obstacle.
Some modules may have another features that can be turned on and disable, in general, customize the work of the closer at its discretion.
But the cost of multifunctional modules is much larger than simple, despite the fact that many of its capabilities may not be in demand, but it will be quite difficult to connect it.
Installing a simple closer
The more functions and the number of doors with which the module will work, the more difficult it will be included in the car power circuit.
Such a closer without problems can be installed itself.
From the tools you will need a bit:
- Screwdrivers;
- Knife and nippers;
- Insulating tape.
First you need to decide on the installation site of the device.
If the car has only one glass management system installed on driver's doorBut responsible for the opening of the glass on the passenger door, then it will be better to install the module inside this door.
If separate and arranged systems are located on two doors or control keys are located on the center console or tunnel, then the optimal will be installed under the dashboard.
Installing and connecting.
After selecting the installation site, you can start and connecting.
The module must be powered by on-board network Auto, so the "positive" wire must be supplied to it, as well as "mass".
Then you need to identify the wires that transmit voltage from the control keys to the electric motors.
According to the scheme attached with the closer, the wires of the wires from the module in the power wiring are made.
For each door, their outputs are provided in the module and they differ in coloring wires.
It turns out that the wire that comes from the key to the electric motor, the module wires are connected to each of the ends of the wire.
Thus, the module is connected to the glass control system.
It is important to choose the wires properly, because there are two from the keys to the electric motor - when the voltage is submitted to one of them, the glass is produced, and when submitting to the second - lowering.
If the module is mistakenly connected to the lowering wire, then when setting the car to protect, the glass will automatically open.
Next, you need to connect a wire to the closer that will transmit the pulse from the security system module. And the impulse is needed, which will be transmitted to the module within a few seconds after the car setting on guard.
Different systems use positive or negative impulses. Therefore, before connecting, you should find out which impulse sends the system installed on the auto.
Closers are universal, so they have access to positive and negative impulses, the main thing is not to confuse.
After connecting the entire wiring, before removing all the wires, it is better to check the working capacity of the closer.
If everything works fine, it will only remain qualitatively forcing all the cuts of the wires, and then remove them from sight.
Connecting the closer for 4 doors is made according to the same principle, only the patch in the standard wiring will be greater.
Homemade closer
As for homemade front door closers, the car enthusiasts have already created a large number of diverse models that work well. And there are simple homemade devices, and some manage to create multifunctional sensors.
The simple closer to make easy, having small knowledge over electronics, and also requires elements to create a module.
And you will need several capacitors, electromagnetic relays, timer and several transistors and resistors.
The principle of operation of the self-made module is: the signal on the module is taken from the block of the security system.
This signal enters the relay that closes its contacts, connecting through the power supply resistor with the capacitor to charge it.
After stopping the signal, the capacitor connects to another relay, which begins to feed the timer.
The low voltage output from the timer will open the transistor, then the voltage will go to one relay, after which the voltage through the resistor will go to the electric motor - the glass will start closing.
After the complete closure of the seclax, due to the stop in the door, the network will increase the load current, which will entail the voltage drop.
Due to the voltage drop, the transistor closes, thereby de-energized the relay, and the closer turns off.
This scheme is considered very simple, but it works without problems and its tasks performs well.
Outcome
As a result, it can be said that the factory bridge closers of the car can install almost every driver at least a bit versed in the electrician, especially since the instruction is attached.
But to solder and install homemade device Not everyone can, and the reliability of such a device under a big doubt.
Although there are no bad models that work for years. But here you already need to focus on the reviews of people who enjoy such devices and the qualification of the master who did them.
Device Slamstop. It is a door closer attracting a loosely closed door. The closer is universal and is suitable for the absolute majority of foreign and domestic cars, To ordinary and sliding doors.
Slamstop ensures that the door will always be tightly closed. In addition to obvious comfort and prestige (it is not necessary to return to the door and close it, if it failed to do the first time) the closer significantly increases the level of security, which is especially relevant when transporting children: the door will be automatically tightly closed.
Closer Slamstop. It works almost silently and distinguished by the highest indicators of reliability: the product successfully stood the test with checking the working cycle of more than 30,000 times, which corresponds to 10 years of operation of the car.
SlamStop is the first device in the market providing such functionality. Prior to that, only cars of the premium segment in the manufacturers were equipped with the argument of doors. The device is mounted inside the door without disturbing the integrity of the appearance of the car. It consists of six constructive elementsEach of which fully meets the criteria for security, reliability, durability and practicality. SlamStop uses the transmission principle of electric drive to the closing mechanism through a solid cable.
The price is per set Slamstop., designed for two doors: driver and passenger. If you want to equip rear doors, you will need to purchase the second set.
Note!This equipment in Moscow and St. Petersburg is sold only with the installation. In other cities, retail sale without installation is possible.
Questions and Answer on SlamStop door closer
In this section, we help you choose alarm to your car. Technical consultations in this section are not provided. For advice on technical issues, please contact technical support for free Number 8-800-700-17-18.
Frequently asked questions and useful articles:
- What will happen to a guarantee for my car?
- Why disassemble a regular key to connect the autorun?
- Will it incinual bypass Tools Pandora, Pandora Clone?
- How much money goes a month on GSM communication with alarm?
- What is the difference between different security systems Pandora?
Alexey Yuryevich
27 Novmarker 2016. Hello, closer for 2 or 4 doors?The door closer serves first of all to disperse not completely closed doors of the car. Now it is not necessary to slap the door at all, the mechanism itself automatically brings it. The option that previously was available only to the owners of some premium cars is now available to everyone.
On the advantages of installing Slamstop door closer:
- Silent closure of a loosely covered door. This function allows you to protect people in the car while driving, as it eliminates the sudden opening of the door.
- Hidden installation, extension of the mechanisms of door locks, increases the time of normal functioning of the loops. Slamstop is not connected to the door lock of the car and absolutely impaired.
- Installation is possible almost to any car.
- The conclusion mechanism withstands more than 30,000 working cycles, which approximately corresponds to 8-10 years of intensive operation.
- The closer automatically determines the presence of an obstacle and release the door after an attempt to close it. This is due to the presence of a protective option, in contrast to most standard closers, so all your valuable parts of the body and pets are in full security.
- The device went on sale in April 2014 in Russia, USA, Germany, Kazakhstan, South Korea, Singapore and the Middle East. To date, Slamstop has no analogues and competition in the automotive market.
Often car enthusiasts install even the most expensive cars Special closers. Premium class, for example, not done at all without a high-quality door closer. Sports such as Toyota GT-One, Peugeot 908 HDI FAP and Bentley Speed \u200b\u200bare also equipped with this non-hard device. The car's door closer allowed foreign developers to create new original exteriors, as evidenced by the doors having the shape of the butterfly wings. This type of car doors gives the vehicle convenience and elegance. In addition to the fashionable view, this device has a multitude of useful design properties, safety and convenience.
The closer attracts the car door to full closure
Purpose of a new-fashioned design
The device has a number of beneficial advantages and advantages, this is evidenced by the following features:
- a loosely closed door through the closer will be independently closed. This function will allow moving safe, as people who are in the car will not threaten the sudden, in addition, it will help protect the car from the unlawful actions of intruders. The motor-brever is equipped with fuses that close the door slowly and neatly, the driver and passengers will not be able to injure or damage their hands and fingers;
- the closure of the doorway is carried out so tightly that it will save in the cabin permanent temperature, eliminate dirt, garbage, dust and moisture. All these characteristics directly affect the service life of the machine;
- the time of normal functioning of the loop and other door items increases;
- the landing / landing of the driver and passengers is much easier, it simplifies the loading of the cargo (the rear door closer will close the trunk, if the hands of a person are busy). This design allows you to open the doors, having them in several different positions;
- opening / closing doors occurs easily and silently.
Appearance of the device
Car door car in design is a small spring located in a metal case. Most often, the aggregate is made of metals that provide long-term performance. On the russian market You can find products from iron, stainless steel, various aluminum and silicon alloys.
Closers do not need a certain maintenanceThe car owner will have only time from time to time to lubricate the moving parts of the structure (valve regulating speed). There are models equipped with two valves, the first adjusts the speed of the closure, and the second is the position of the rod.
If the motorist decides to acquire such a useful design, it must take into account the color of the car, not forgetting the size and weight of each door.
Varieties of device
Door closers on a car are divided into several types and types. They differ in their characteristics and designs, electric units have the greatest popularity among Russians.
So, consider all the models of the autodifers in more detail:
- For such as SUVs and universals, specialized structures are provided that can easily "raise" huge rear doors of these vehicles. Closers are able to replace standard gas stops. Despite similar appearanceThey differ in their design, the inner part of the latter is an electric motor equipped with a worm transmission.
- On the market you can find a model that hides under the upholstery of the cabin. Such an aggregate through electric engine binds to door hinges with a gearbox. It is for this device "responsibility" for opening / closing the trunk and other elements in the car.
- No less affordable and functional is considered an auto-breeder equipped with hydraulic system. In such an unit, with the help of the electric pump is injected high pressurewhich contributes to the effects of fluid on all sides of the piston.
- The cargo car can be equipped with a very comfortable design, which can be easily installed with their own hands, - by the closer, which is able to memorize the height necessary for the lifting of the trunk cover.
Installation design
To set the closer on the door correctly and gently, there is no need to get any special knowledge and use. If there is no desire or the ability to trust the installation of the service center specialists, you should stockday and patience.
First of all, you will have to remove the entire inner trim. In order for the process to go easier, they should be armed with a slotted and crossed scold.
If the machine has an electrical control system with mirrors and side windows, you will need to first look into the technical documentation, familiarize yourself with the prescriptions of the manufacturer's plant. All terminals will need to be disconnected, it is impossible to allow them to be confused, the incorrect connection will later affect the malfunction of all servos.
The third stage is the connection of an electron actuator with a tightening cable. There is no need to describe the present process in detail, as it is stated in the instructions. It should only be remembered that the central unit should be located so that the reaching device is drawn to the door lock.
Installation of car door closers is carried out directly above the door lock. Built-in design should interact with a magnet, on which the proper functioning of the entire system depends. Most likely, for convenience it will be necessary to use a drill, with which it will turn out quickly and gently drill the desired holes. The sensor must be directly under the return magnet, the productivity of the product depends on it.
As a result, only the sensor and the electronic control unit connected to the 12-volt electrical network of the car will remain.
Conclusion
It is impossible to overestimate the benefits that modern car owners provide car owners. The design is equipped with all necessary to install fixtures that allow even an intense car enthusiast to implement the device in vehicle. Despite the fact that at the moment car closens There are far from all new cars and are rather an additional optionIn the near future, this device will even equip the basic package of the machine. The value of the closers is relatively small, to afford such a purchase can any ordinary driver, for which the safety and convenience of movement is in the first place.
Tirelessly moving forward! Every day we work on how to improve our today's proposals in terms of car retirement at the level of media production, as well as in part external tuningwhich enhances the comfort and safety of operation.
Today we will start with what we are talking lately very often: Yekaterinburg - own office, warehouse and installation center. It is the topic of Yekaterinburg that we will touch on this article, since it was that division of our network distinguished themselves in a group of goods, which we now tell.
On the left in the photo: Head of Kibercar Ural - Kvashnin Maxim, Right: Sales Director Kibercar Motor Rus - Huge Ilya.
So, Beschatry automatic door closers.
Today, doors' closers are far from a new word in the issue of vehicle equipment, but there are barety closers, especially with the possibility of installing almost all cars - it is interesting.
This is what the set of door closers looks like, which can be installed almost any car.
Packing kit.
It so happened that the demand in the Ural region, almost exceeds the proposal, which we, of course, are pleased. Over the past month, with a small 2018, our Ural team has installed door closers for several different cars. In this article we are in a hurry to boast the most interesting installation on the car Range Rover. Velar. By the way, it was an exit installation to the Dealer Center "Krasnolesy".
The second car, on the example of which the installation of door closers was already in our installation center - this is Lexus LX570. The will of the chance (the car was at our disposal two days) we managed to shoot the video, please look.
Recall that one of the most important features of the installation of data of automatic closers is universality. Here are some examples of work from our installation centers in Moscow and St. Petersburg.
Lexus LX 570 (Moscow Installation Center).
