Contacts. Opus BT-C700 - Smart Charging for Finger and Misinchchildren Rechargeable Batteries Best Intelligent Charger

Price: $ 20.98

Hello everyone:). Currently, there is a mass of devices on finger batteries or batteries. And how often the batteries and batteries are supplied. In general, I bought myself one device, which quickly spends the charge of batteries. Then the Internet came across a review of a "smart" charging, which can charge, discharge, restore battery capacity and show all this on the display. I have a regular charge that does not show anything even when the process is completed. I found a smart charging for Aliexpress, chose the cheapest, with good rated Seller, reviews and estimates of buyers.

The device is called "BT-C700 Opus", it chinese analog "BC-700" (La Crosse Technology). When buying it was necessary to indicate the "plug" of the euro or the United States.

It was a product about a month. Came in a corporate Chinese box with pupil film. Minimum set of power supply, charging itself and instructions in English.

This memory may separately charge 4 NI-HM type batteries AA or AAA (finger or mizinechikhchi), other types of batteries have not been checked and not going. The most recommended Ni-MH. I can charge and discharge with several charge currents - more currentThe faster it is charging, but also faster to determine the battery.

In addition, there are modes: regeneration, testing, fast testing. Regeneration This is a complete discharge and charging to return part of the battery tank. Testing to learn the current full capacity and full battery voltage. As you can see on my photos, the display has a display backlight.

The "MODE" button sets the charger mode (you first need to hold it and then choose the mode), and the "Current" button is a charge or discharge current.

The DISPLAY button sequences the parameters of the memory current, the charge current, current voltage, flooded / fusion container, charge / discharge time for each battery separately.

About quick testing is written that in this mode, the internal resistance of batteries occurs. Measurement occurs within 10 seconds. The result is displayed in millios. If you show 20-80 moms, battery good quality. Accumulators with readings above 500 MΩ are not applicable in devices with high current loads. Fast test mode can be used to test not only batteries, but also the usual batteries.

In the theory, the device is equipped with thermal sensors and reduces the current if the batteries overheat, there are ventilation holes in the bottom.

Outcome: The thing is good, convenient) can be charged quickly or slowly and you always see when batteries are charged. In theory, you can revive the killed batteries. In general, I am satisfied with such a device.

With advent rechargeable batteriesMany processes in life have become easier. Especially when it concerns finger batteries. Digital cameras, camcorders, and other new-fashioned gadgets are capable of working up to 25 hours without recharging. And all this is achieved due to the electric current accumulated in the battery. No less important advantage is long service lifewhich is possible due to the presence of a charger. What they happen to choose how to choose, and is it possible to collect with your own hands, learn later.

Fingering batteries can not work forever, requiring periodic recharging from stationary power supply. The charger serves as a peculiar conductor between the battery and the current, which the latter is able to accumulate for further use in gadgets. Since the market for instrument models operating on such batteries is extremely diverse, the batteries themselves (by power and composition) differ accordingly. In connection with this, the chargers have their own constructive featuresallowing you to serve specific batteries.

Design features of devices

Necessary constructive elements For all types of charging devices are:

Voltage converter - capable of converting electricity Variable voltage used on demand.
Stabilizer - Adjusts the voltage level, preventing failure in the process of charging or combustion the device due to network voltage jumps.
Control sensor - signals the beginning and completion of the battery charging process.
Rectifier - responsible for the smooth flow of charge into the battery, by aligning the current strength to the required mark.

By themselves, recharging devices are enough compact dimensions. Their principal difference lies in the form of charged batteries that happen:

AA - This type of batteries has a length of 50.4 mm, and the diameter is 14.5 mm. Voltage Nominal 1.2 W, however, may differ depending on the brand. Used in digital video cameras and cameras. In everyday life, such batteries are called finger.
AAA - have a smaller charge, so require more frequent recharging. In common, they got the name "Misinchiki" or "Mini-finger".
9B - a combined battery consisting of two batteries.

The charger can be both highly specialized, intended solely for a certain type of batteries and be universal. The intellectual property of universality is achieved by configuration by a special adapter board, producing the charge of all types of batteries.

Principle of operation of the device and additional functions

Charging is carried out by supplying current from the power grid. The converter estimates the resulting amount of current, after which it transmits it to a rectifier that prevents jump-shaped voltage changes. The control sensor shows when the battery is fully charged. Most often this is a LED element, changing its color, depending on the level of charge.

In addition to charge, charger can perform more functions about which many users do not even recognize:

The discharge is needed in the case when long-term non-use of the already charged battery is assumed. The fact is that the etherolite (main part of the battery) can be dirty, which will affect the further quality of the battery. The discharge is a reverse process, in which the charged particles lose their mass and strength, becoming neutral. In some chargers, discharge begins immediately after the battery was fully charged, and if it is not to withdraw from the memory, as a result, you can get an absolutely empty battery that you have to charge in a new way.
Recharge - applied when it is necessary to fully charge the battery that has not yet been discharged. It is carried out by mapping already having a charge with the amount that must be accommodated in the battery.

When the batteries of AA / AAA batteries are bored for remote controls, electronic wall clocks, radio controlled toys and other electronics, the house is filled with batteries that need to charge something. Of course, you can do the primitive charge of rubles for 200, but, as a rule, they have general shortcomings - low speed charging rises in longing, the lack of controlling the end of charging, in general, such devices are very easy to ruin the batteries, and if one battery is from all over the set, it is already beginning to die and has a low capacity, then you will not see them all, and you will be difficult then to find out who to blame. It is much wiser to acquire an intellectual memory, with which you can fulfill full-fledged battery maintenance - charge, discharge, "recovery". As an example, we take Kweller X-1800, which, by the way, is not very expensive.

Packaging and equipment

The device comes in a box of small sizes. Packaging is simple, but all the necessary information in sight.

In a set, only an external power supply is supplied with charging. Yes Small user manual. And nothing more is needed.

The charger body is made entirely of plastic. Size - typical for this type of devices, nor big nor small. Photographers love to take such devices on travel for fast charging Batteries for flash, but the case will have to be purchased separately.

A large liquid crystal display is in front. The display simultaneously displays information about each of the four compartments. From the controls - three buttons: "Mode" to change the operation mode, "Display" - switches the information (voltage / current / capacity / operating time) on the display, "current" - changes the charge / discharge current value. The buttons are large, pressed with a certain force - protection against accidental presses.

During operation, both accumulators are heated and itself charger. The housing is perfectly blown due to numerous perforations not only on the side, but also from the bottom, thanks to the legs.

To protect batteries from overheating in Kweller X-1800, thermal sensors are built into. If the battery temperature reaches 58 degrees, the charging / discharge process will stop until the value falls up to 40 degrees. Similarly, with a controller board of the controller itself - a threshold of 72 degrees with restoration of work when the threshold is achieved at 50 degrees.

The advantages of the device can be attributed to the interesting implementation of contacts. First, from the minus there are two contacts - for AAA and AA. Depending on the size, the battery is either interpretable, or a little hanging in the air.

But the advantage contact is even more interesting - ribbed. This is done so that the battery does not turn and not shifted in the process of work. Surely when using inexpensive charging, you noticed that the batteries are kept somewhere weak, and any awkward movement can lead to a loss of contact. It is very annoying, but the Kweller X-1800 does not have such a shortage of such a shortage - batteries are sitting as glued, charging you can even throw - the batteries will still remain in place.

Kweller X-1800 allows you to charge enough high currents. The user can choose one of the following values \u200b\u200b- 200 mA, 500 mA, 700 mA, 1 A. If you want even more current currents, then in the case of installing batteries only in extreme slots, you can choose 1.5 A and 1.8 A. Total , maximum charging current values \u200b\u200b- 4 A during the installation of four batteries at a time, and 3.6 A when installing two acb. Such high values \u200b\u200bcannot be provided without good external food. That is why kweller X-1800 comes with a power supply, which gives 3 V at a current of 4 A, i.e. 12 W.

Current categories are adjustable in smaller limits - from 100 to 500 mA with intermediate values \u200b\u200bof 250 and 350 mA. In the case of the selection of measurement modes of the capacity or recovery, the discharge current is mounted twice as fewer than the charging current. Therefore, such strange values.

With numbers everything is clear, now let's see how it is all directly in work. After connecting to the network, the KWeller X-1800 is immediately ready for operation and displays information about the ACB installed. If the slot is free, or installed faulty elementDisplays "NULL". By the way about unfamiliar batteries - in the event of an acute desire to reanimate the "Died" element, the manufacturer recommends pre-charge the battery on a third-party third-party charging in Slane. This procedure is called "push" the battery (that is, a fairly hooked battery that cannot be restored by voltage that is used with normal charging) by short-term feed high voltage. In the case of 1.2 in batteries, it is possible to use a voltage of about 3 V. for obvious reasons, intelligent KWeller X-1800 type such voltage is not supported.

By installing batteries, you can start setting up. First you need to select mode. With the charge and discharge, everything is clear, only the current is set, and at the end of the procedure, the "Full" will turn on the display. Capacity definition mode It works like this - first the battery is charged to full capacity, then discharged and during the discharge process is measured by the "given" current, then the battery is registered again until it is fully tank to be prepared for further operation. Of course, such a procedure lasts for quite a long time - (as an example - for batteries with a capacity of about 2300 mAh with a current of 700 mA, the total time of the procedure will be about 15 hours) and it is better to perform such work at night - just for the morning it will be possible to see the measurement result And pick up charged batteries (snobs can calculate how much you will save on the night tariff for electricity).

Recovery mode An even more long process is an alternation of full charge / discharge until the battery capacity will stop growing. If the element is subject to recovery and gradually "dials" the container, then the procedure may take several tens of hours, that is, a few days. If there is no desire to wait so long, then it is better to simply measure the container, and if it is strongly lower than the stated, for example, 700 mAh instead of the stated 2300 mAh, then such a battery is better to throw much away, or just throw out. And if you hurry nowhere - you can try to return to him former youth (read - container).

There is one peculiarity of Kweller X-1800, which will seem deficient - when changing the mode, it is set for all busy slots simultaneously. That is, by setting all four elements, it is not possible to adjust the mode of operation for each slot separately. But there is one trick that is not described in the instructions - with a consistent installation of the battery, you can configure the charge / discharge current individually and the newly added elements are switched to charging mode. This is done so - the battery is set at the same time, but by groups. For example, first install two AA elements, select the desired mode, for example, measuring the container, and set the charge current of 700 mA. We are waiting for about 10 seconds until the process goes. Then we install the two AAA elements, their mode will automatically be installed on the "charge" and again specify the desired current. But you need to remember - when you try to choose a mode, it will change at all busy slots at the same time. Thus, you can create up to four groups (if you install one element) with different currents, but the modes will be no more than two, and the latter is the charge. This trick is useful when installing elements of different formats, in particular, AAA have a smaller capacity than AA, and because The charge current must be selected in proportion to the capacity, then it is more logical to charge the "Misinchik" batteries with less current. For clarity, you can take a look at the video.

Of course, it does not solve problems with the inability to set individual modes of operation for each slot, but this trick is still useful. At the same time, such problems are not needed indefinitely, and most often the user simply sets all the batteries at once, chooses the mode and goes to its affairs. In this case, Kweller X-1800 is very simple in circulation and is suitable for a wide range of users - even the young book will figure it out without instructions.

The larger in the house of batteries, the longer they serve - the sharper the question arises the selection of sets. For the power of many devices, not one element is required, but two (for example, the remote remote control), or at once four (flash for the camera, r / y machine). In such situations, the weak link will summarize the entire chain. If one of the installed elements has a capacity of much smaller than the capacity of other elements, then this item will be faster and "substitched" the entire kit. That's why capacity measurement function So in demand among the owners of a large number of batteries - you can collect elements of the same tank in the kits and know what each kit is capable. Especially acute this question gets up in photographers, shooting reports and weddings. That is, working in such conditions when there is no right to error and equipment should be ready for work at any second.

As for me personally, I finally measured the capacity of all items in my different collection, once again I was convinced that it is impossible to believe the numbers on the package, and that good brands really serve for a long time. For example, the AA battery alleged with a capacity of 2300 mAh, which was included with inexpensive charging, in fact, have a capacity of 1500 mAh. And the set of the inadequate Philips 2450 mAh, despite the significantly more intensive use and frequent charge of the current 1 A, in four years they have retained in 2000-2100 mAh capacity. As for the Sadious Chinese Elements of AA, which stand like salt batteries, the container turned out to be extremely low - from 200 to 400 mAh. The manufacturer even ashamed to apply any information on them, there is neither numbers or letters. Place them in the console do not more. But a little more expensive Chinese elements of AAA with a proud inscription of 1800 mAh (which in principle is not possible for this format) have a capacity from 400 to 500 mAh - quite worn, and the price is justified. For all the time testing, Kweller X-1800 left very pleasant impressions, not to mention the fact that I finally implemented a "population census" among its batteries.

Question price

At the time of writing, the KWeller X-1800 view could be purchased at a price. 1300 rubles. Includes no free battery, but at such a price, the device justifies each spent ruble.

findings

We will collect all the advantages and disadvantages. The advantages of KWeller X-1800 include: a wide range of charge / discharge current adjustment, four modes of operation - Separately, we note the functions of measuring the capacity and restoration of the battery, as well as the built-in protection against overheating and batteries and the memory itself.

Of the disadvantages - the inability to configure the mode for each slot individually (not counting the current, as we talked above). Kweller X-1800 is a rapid intelligent charger. Let not be perfect, but good. And the price of 1300 rubles makes this device also extremely profitable purchase. Moreover, the guarantee from Kweller.ru is as much as 3 years, just like a car.

Lutovinov Maxim (Aka. Kok)
25 /09.2012

Considerable amount of all kinds household appliances and electronics running on batteries of different types. From among gadgets, where their use is most in demand, there are cameras, repair tools (drills, screwdrivers, etc.), lights, sound recordings and a lot of other. Theoretically, all of the above equipment can be used by conventional AA and AAA batteries type (provided that the devices are compatible with them) that are sold literally in each store (Dusells, Energizheizers, etc.). But in practice, in most cases it is just unprofitable, since they are sitting very quickly. It is more expedient to use rechargeable batteries (according to the habit of them are also often called batteries). For proper charging They are able to work from 200 to 500 cycles (depending on type and quality). But for the full operation of such AKB, you must have a special charger (memory). Choose this device is based on the tasks that will be placed in front of it. The most important are the following characteristics:

A type. Three main types of memory are distinguished: simple (very cheap, but without auto-discontinuity), automatic (turns off when the full charge battery is reached) and intelligent (mass additional features, We will look at them below).
Compatibility. Each battery has such characteristics as the size (AA, AAA, 18650, Crohn, etc.) and an electrochemical system (Ni-CD, Ni-MH, Li-Ion and others). Therefore, to start, it is necessary to determine for which batteries you need, and then look for a device suitable for working with them.
Number of connectors. Somewhere there will be enough 1-2 slots, and in other situations, simultaneous installation as much as possible is important.
Tok Power. Weak current (0.1 a) is most safe and is considered recommended, but the process of complete charging is taken by a lot of time (14-16 hours). Accordingly, the strong current will reduce the time costs, but will reduce the overall life of the battery.

We have gathered for you the top 10 best chargers from Aliexpress. When choosing goods, the main emphasis was made on such indicators as:

functionality and characteristics of the device;
user reviews;
value for money;
seller reliability rating.

Top budget chargers with Aliexpress

3 Palo C824.

The lowest price tag for AA type batteries
The price of Aliexpress: from 122 rubles.
Rating (2019): 4.8

The most basic device of this type. Compatible with so-called finger and mismatch batteries AA and AAA (Ni-MH / Ni-CD). At the same time, no interesting features here, in principle, are not provided, not to mention the screen. And since the memory is automatically not turned off after the full battery charge (that is, up to the explosion), you must carefully closely follow the process (i.e., to manually calculate the approximately necessary time, based on the capacity of the battery and the standard Palo C824 capacity in 150-160 mAh) . On the device there is a LED indicator, but there is no particular sense from it - it testifies only about whether the battery is charging or not without any information about the progress of the process.

2 Jetting USB Battery Charger

Best price
The price of Aliexpress: from 69 rubles.
Rating (2019): 4.8

A simple device that includes only a compact plastic case (USB cable will have to get separately). Suitable for charging the Batteries of the Form Factor 18650 (the older model will also depict the batteries of the format 26650), and from the proposed functional there is only a light adhesion about the status of charging (the red light bulbs are replaced by green) and the automatic stop of operation when the total charge is reached (the established current limit - 1a) .

In general, with its task, Jetting is more than copes, among a large number of reviews there are practically no complaints about some problems with technical Space and efficiency. However, you should be prepared for the fact that delivery in the Russian Federation at the seller, though free, but very long.

1 Varicore 04U.

Favorable price for charger with 4 connectors
Price for Aliexpress: from 330 rubles.
Rating (2019): 4.9

Very budget, but at the same time a pretty universal gadget, which has 4 connectors at once under batteries. Despite the fact that the manufacturer recommended a device for recharging batteries by 3.7 V (models from 10440 to 18650), Varicore can charge and other types of batteries (AA and AAA), however, in this case, indicators will not let you know about the end of this operation, so We will have to follow everything yourself.

According to the manufacturer, in the apparatus there are as many six types of protection (from overload, overheating, short circuit, full discharge, etc.), but users do not recommend inserting more than 3 batteries at the same time. The speed of the process is entirely dependent on the power supply to which the USB cable is connected.

The best chargers for everyday use with Aliexpress

If at home there is not a lot of techniques that require batteries for their work, or these devices are rare enough, then there is no particular sense to significantly overpay with a huge number of slots and a bunch of additional functions. In this case, simpler and compact models will be quite suitable.

4 Vontar Single Charger

Optimal choice for Li-Ion batteries
The price of Aliexpress: from 525 rubles.
Rating (2019): 4.8

Single Charger from Vontar is perfect for lithium-ion batteries at 3.7 V (size 26650, 18650, 18,500, etc.). The gadget is equipped with a small display, which shows information about the voltage, the charge percentage and the strength used (two options are available: 0.5 A and 1 A). After the battery inserted in the memory is fully charged, the device automatically stops this process, which allows to operate batteries with maximum efficiency. The external way out of the device is a Micro USB port, so it will additionally need a network adapter (you can take almost any Android phone at 5V / 1A). The disadvantage of Single Charger should be called only a narrow compatibility range for its price (as already mentioned above, it only works with an acb on 3.7 V).

3 Palo C905W

Intuitive interface
The price of Aliexpress: from 599 rubles.
Rating (2019): 4.8

Despite the fact that the C905W immediately has four free slots, the memory itself is very compact and simple (even one who first faces such equipment) easily. This model Compatible with AA and AAA batteries (Ni-MH / Ni-CD) and can automatically turn off when reaching full level Charge. The screen is also present, but it does not perform almost no functions, but simply serves as a certain indicator of progress (and the information is not given in percent, but in divisions it is not always convenient). From the pros, you can also note the direct work from the network (the adapters do not have to), and the main minus is the lack of opportunity to choose the desired current strength (by default it gives 1.2 A, which is sometimes too much). In addition, with simultaneous charging at once, 4 C905W batteries is heated, albeit slightly.

2 Liitokala Lii-100

Compact and convenient
Price for AlExpress: from 354 rubles.
Rating (2019): 4.9

Liitokala is one of the largest and famous companies In the market chargers for batteries. They offer wide choose Memory for every taste and wallet. For example, the LII-100 model under consideration at a low price has a number of advantages. Among them and good compatibility with almost all popular types of batteries (Li-ion, Ni-MH, Ni-CD), and a smart control system (automatically determines the type of inserted battery, it starts independently and finishes charging, and also detects faulty and discharged devices) , and the presence of a mini-display with indicators (displays current progress). Separately, it is necessary to note the presence USB output On the case, which allows the use of memory as a turn of the bank. Of course, one slot under the battery is unlikely enough for a long time, but, on the other hand, the charging of smartphones is still not the main function of LII-100. As in the case of the Vontar Single Charger, the network adapter is not included.

1 Liitokala Lii-202

The best ratio of price and quality
Price for Aliexpress: from 674 rubles.
Rating (2019): 5.0

Lii-202 is a two-cell model of Liitokala. By basic parameters this version almost no different from Lii-100, but there is nothing wrong with that, since there is already everything that is necessary for optimal exploitation: Wide compatibility with various batteries (from AAA to 18650), LED indicators of charge progress and the ability to switch the current strength. However, the LII-202 is much more convenient for use as a turn of the bank, since there are several connectors under the batteries. A significant plus is also the fact that the network adapter (5V / 1A) is included in the kit - nothing will further search for anything.

Best Professional Battery Chargers with Aliexpress

The term "professional" in the name of the category is quite conditional, we are talking about those situations where a person constantly deals (mainly for work) with a multitude of batteries and it needs a memory capable of simultaneously charge them in the right amount.

3 Palo P10.

Favorable price for memory with 8 slots
The price of Aliexpress: from 491 rubles.
Rating (2019): 4.8

The undoubted advantage of this gadget is the number of connectors under the batteries - here are their integer 8. This should be enough even to the most demanding customers. Otherwise, the design is very simple - there are no serious functions and even a small display. From the claimed opportunities - smart control ( automatic shutdown When achieving 100%) and LED indicators offering the user information about the current status of the memory. The relative disadvantages should include the multiplicity of the charging process (at the same time you need to insert 2.4.6 or 8 batteries, that is, an even number) and the impossibility of self-selection of the current strength used. Palo P10 is compatible only with AA or AAA devices (Ni-MH, Ni-CD).

2 Liitokala Lii-500

Wide set of functions
Price for Aliexpress: from 1214 rubles.
Rating (2019): 4.9

LII-500 - senior model from the ruler of the memory from the Liitokala brand. Accordingly, it is the richest among all his fellows. First of all, it is necessary to note the many available modes of operation: standard, fast test (Cycle charge-discharge with the subsequent measurement of the container), full test (A similar procedure, but time occupies more and the result is obtained more accurate), determination of the battery life. Instead of single indicators in this memory, a much more informative screen is set, and 4 types of current are available for charging. various power. Like other Liitokala gadgets, thanks to USB-exit LII-500, can be used as a turn of the bank, but considering the dimensions of the device, it will not be very convenient and appropriate. In addition to the external power supply, the kit also includes a cable for connecting to the cigarette lighter in the car and detailed instructions in English.

1 Opus BT-C3100

The most powerful
The price of aliexpress: from 2060 rubles.
Rating (2019): 5.0

Opus - main competitor Liitokala companies in the battery charger market. And the BT-C3100 is the most expensive and functional product in their ruler. In this regard, when discussing the advantages and capabilities of this model, all this occurs in the contest context with the flagship of the rival LII-500. Among these, you need to highlight more modes of operation (three previously mentioned plus "Battery"), a wide range of power (you can specify any current from 200 to 2000 mA), active system Cooling (fan). In addition, very many users in their feedbacks wrote that BT-C3100 is almost the only memory that is able to qualitatively restore the "killed" batteries.

ARTICLETOC: Enabled \u003d YES)

Today it is even difficult to imagine how they lived before without portable devices. They accompany people everywhere: at home and on vacation, on the street and at work. Without a doubt, it is much more convenient to live with them if there is a universal charger for all types of batteries.

But, along with this, the rapidly growing "population" digital devices Certain problems associated with the absence of a single standard for power supplies.

To feed such devices about 10 years ago, the standard batteries were used, which could be counted on the fingers, so the same batteries were used to power tape recorders, transistors, models. Modern electronic devices require a "their" source.

Batteries differ electrical characteristics and sizes, because of which are suitable for limited use. Once without them, a man is cut off from the outside world.

Therefore, to recharge available devices, the user has to be used strictly corresponding charging, which is inconvenient even in stationary conditions at least for the fact that many outlets are required. In addition, it is necessary to constantly disperse the wires. And about how much it is not just during rest and travel, and not to speak.

This problem is particularly relevant for lovers to travel: Volumetric and not very well replenish baggage, and in hotels there is only one available outlet.

The output in such a situation is one - a universal charger for all types of batteries having a connecting cable with adapters connected to various portable gadgets.

Charge using a universal charger for all types of batteries is much more convenient. When weighing up to 400 grams, they even put a pocket, and in the backpack, especially.

Video: Best Universal Charger (Review)

Battery Charging Types

Universal Charger - Eco6

The universal charger for absolutely all types of batteries - ECO6 with a set of adapters allows you to charge the current 5a capacity of the LIPO battery (up to 6 cans). For balancing in the kit there is a JST-XH connector. The supply voltage is 11-18 volts, so the charging can be made from the power supply unit of a personal computer or a car battery. Feature device in memory, i.e. memorizing parameters of five batteries. Maximum power And the scatter of the charge current, as is the above described model.

In the charging intelligent balancing device Hobby King 4B6 - 4 autonomous ports. This permits to simultaneously charge 2 lipo batteries, for example, a transmitter battery and "Candles" batteries.

Hobbyking ECO6-10 200W 10A, which can automatically set and charge the battery current of any size, includes various connectors, including balancing JST-XH, wires for all connection methods.

And they are easy to charge zippy / Turnigy batteries. At the input, the value of the supply voltage is from 10 to 18 volts, which is suitable for both power supplies for computers, as well as for automotive batteries.

On the features of the universal charger for all types of batteries, you can attribute:

the ability to balancing a separate bank (JST-XH connector);
microprocessor;
wide charging current range (0.1 ~ 10 A);
temporary restriction function;
energy saving mode;
storage of data for 10 batteries in memory;
battery protection (power monitoring);
memorizing the dates of the operational period and entering the device to work.

Another brand, which is impossible to be bypass. The device is compatible with many types of batteries. It is able to charge from 12 V and 110/240V (NiMH, Lion, Lipo, Life, NiCD). In addition, it has a liquid crystal sensory monitor, the length of the diagonal of which is three inches, where the main characteristics are reflected, including graphics.

The characteristics of it are as follows:

supply voltage - 100 ~ 240 V;
power charge (maximum) and discharge, respectively, 90 and 10 W;
oscillations - 50-60 Hz;
charging current - 0.1 ~ 10 A;
weight - 520 grams;
dimensions - 146 x 148 x 58 mm;
types of batteries - (Lipo), (Life), (Liion), (NiMH), (NICD).

IMAX B6AC V2 - the latest version of the professional device with functional new products - management from a personal computer. If necessary, the firmware can be updated. The device allows you to adjust voltage on output connectors. To charge high power batteries - this perfect solution. It is also used for a lithium battery when it is required to measure its internal resistance. B6AC V2 is equipped with functions that limit the charge capacity, the amount of time and current, which makes it most secure among the analogues.

Main characteristics:

supply voltage 100-240 V;
input supply voltage - 11-18 V;
for tanks: (NIMH), (NICD), (Liion), (Lipo) and (Life);
discharge and charge power (maximum), respectively, 5 and 50W;
oscillations - 50/60 Hz;
limits of the discharge current and charge - 0.1 ~ 5 A;
the number of elements in the NiMH battery is from 1 to 15, in the remaining - 1-6;
pB batteries voltage in the range of 2-20 V;
weight - 832 grams;
dimensions - 135 x 144 x 36.

It is completed with such details:

network cable;
with T-connector, 4mm banana;
connectors: JST, XT60, Futaba, Crocodile, DC Jack / Crocodile.

The device allows you to charge lithium lead, as well as nickel batteriesSupported with balancing function - Turnigy B6 Pro. Adjusting the charging current occurs in the range of 0.1-6.0 A. Li-XX elements simultaneously charging up to 6, and Ni-XX - to 15. For user convenience, the device easily remembers 5 batteries.

Power supply has reliable protectionThanks to which to worry about what will be "planted" the battery is not needed. Alone it translates the battery to "Storage" mode.

For nutrition, every source issuing 11-18 volts is suitable. The charging is received to the markets in four variants of color execution, has a LCD display and backlight.

Turnigy

Another Turnigy B6 Pro model. Thanks to its capabilities - multifunction device It can charge and monitor the condition of nickel, lithium and lead batteries. As in the previous type, it charging Tok It is in the range of 0.1-6.0 A. in the internal memory contains data on five batteries. The power supply is protected, so the battery will not be "planted" when charging "in the field". The device can track the temperature of the battery (no sensor included), with long non-use, translate the battery to the storage state. Food is possible from any source with constant tension 11-18 volts. To make it easier to "identify" produced in 4 colors.

TURNIGY TQ4 device can simultaneously charge four containers. of different types. These batteries include: Lipoly, Li-Ion, Lihv, Life, Nimh, Ni-CD. The device 1100 grams, equipped with JST-XH (2 ~ 6) connector, PB 2-24 Battery voltage in NiCD / NIMH battery of elements from 1 to 15, in Liion / Lipol / Life - 1-6 pieces.

icharger 106B-Plus250W 6S

The power of the Multifunctional Charger Icharger 106B-PLUS250W 6S is 250 watts, and the current value is 10 amps. Almost for all batteries it fits. A feature is urgent balancing.

If the question arose about purchasing a universal charger for all types of batteries, will help the legendary device IMAX B6 Power Bank (PB12000AB), etc. latest model It charges three devices at once, for which it has the corresponding 4 USB connector.

Video: Best Universal Charger for all types of batteries