Set of an autoslemer tool. Manual tool for car service

Set of auto mechanic NIA-1. Allows you to perform assembly and dismantling work in the process. maintenance Or under repair motor vehicles domestic and foreign production. The thoughtful combination of the tool included in the set, its quality and low price do NIA-1. An excellent alternative to foreign tool sets.

In the trunk of any motorist there is a tool for conducting repair work. Some are a few spanners, a hammer, a pair of screwdrivers and pliers. Others have a complete set of a fitting and assembly tool, such as a set of auto-mechanic NIA-1.

The set of auto-mechanic NIA-1 allows installation and disassembly work in the process of maintenance or during the repair of motor vehicles of domestic and foreign production. The well-thought-out combination of the tool, its quality and low price is made by NIA-1 excellent alternative to foreign tool sets.

The auto mechanic set includes a wide range of wrenches combined keys, combining the functions of the horn and cape. Availability this type The keys reduces the total amount of the tool in the set and reduce the weight of the set itself. And also gives one undoubted advantage: if when working a horn key, you will need a cape of the same size, it is only worth turning the key to the other side - and not to look for a suitable bag with tools!

The set of tools NIA-1 is also completed with the end heads of size from 8 to 24. The end heads allow you to unscrew without damage to any fastener, because Contact him throughout its height. This prevents the "rounding" faces of fasteners.

The tool included in the kit is certified (if necessary, the appropriate documentation is provided).

Composition of set

1.	Wrench wrench combined 8x8	1 PC.
2.	Wrench wrench combined 10x10	1 PC.
3.	Wrench wrench combined 12x12	1 PC.
4.	Wrench wrench combined 13x13	1 PC.
5.	Wrench wrench combined 14x14	1 PC.
6.	Wrench wrench combined 17x17	1 PC.
7.	Wrench wrench combined 19x19	1 PC.
8.	Wrench wrench combined 22x22	1 PC.
9.	Wrench wrench combined 24x24	1 PC.
10.	Torch head 8.	1 PC.
11.	Oktor head 10.	1 PC.
12.	Torch head 11.	1 PC.
13.	Fur head 12.	1 PC.
14.	OK head 13.	1 PC.
15.	Fork head 14.	1 PC.
16.	Torch head 15.	1 PC.
17.	OK head 17.	1 PC.
18.	Torch head 19.	1 PC.
19.	Torch head 22.	1 PC.
20.	Fork head 24.	1 PC.
21.	Head Candle "16"	1 PC.
22.	Candle head "21"	1 PC.
23.	Hinge	1 PC.
24.	Extension, 250 mm	1 PC.
25.	Custom key	1 PC.
26.	Key with attach Big square, 300 mm	1 PC.
27.	Screwdriver strut 8.0x150	1 PC.
28.	Screwdriver slotted 6.0x150	1 PC.
29.	Screwdriver Cross-shaped №2х100 mm	1 PC.
30.	Cruciform screwdriver №3х150 mm	1 PC.
31.	Chisel cleaned 160 mm	1 PC.
32.	Hammer 500 g	1 PC.
33.	Pliers combined 180 mm	1 PC.
34.	Lumps side 180 mm	1 PC.
35.	Plugs adjustable 250 mm	1 PC.
36.	Gloves knitted PVC	1 PC.
37.	Pen ball	1 PC.
38.	Notebook	1 PC.
39.	A bag	1 PC.

Passport to the set of tools of auto mechanic NIA-1

The ratchet key will help the car mechanic to work in a limited space. Due to the presence of a ratchet in the key design, it disappears the need to rearrange it when unscrewed fasteners.

Set of tools NIA-1. It is also completed with the end heads with a size of 8 to 24. The end heads allow you to unscrew without damage any fastener, because Contact him throughout its height. This prevents the "rounding" faces of fasteners.

In addition to the end, the set includes standard candle heads (16 and 21 mm), which allow you to quickly and without effort to replace the spark plugs of gasoline engines.

The rest of the tool included in the auto mechanic set helps when conducting collapsible assembly works, and gloves protect the hands of an auto mechanic from dirt and damage.

The entire tool is packed in a solid bag, which is convenient when carrying and takes up little space in the cargo guide. The tool is made of high-quality materials providing its frequent use and high loads during operation.

Characteristics

Payment

Cash payment

Delivery

Self-delivery from warehouse

Mon-Fri: from 10:00 to 18:00
Pickup for free.

Up to 30 TRP. - from 500 rubles;
From 30 t.. Rub. - is free.

Delivery to regions of the Russian Federation

Delivery by Russian Post

Cash payment

You can pay in cash with a courier on the fact of delivery of products in Moscow and the Moscow region.

Cashless payment (for legal entities)

After placing the order, send it to the mail [Email Protected]website order number and your details of the organization.

Payment on the bank account (for individuals)

You can pay for an order in any commercial bank.
After placing the order, send it to the mail [Email Protected]website Order number and FULL NAME with contact data, we will put your bill for payment.

Payment using a bank card (for individuals and legal entities)

When paying and receiving products from a warehouse or courier, inform us in advance about the desire of payment by bank card.

Self-delivery from warehouse

Self-removal from the warehouse is possible during his work hours:
Mon-Fri: from 10:00 to 18:00
Pickup for free.

Courier delivery in Moscow and Moscow region

Delivery of small cargo in Moscow within Moscow Ring Road:
Up to 30 TRP. - from 500 rubles;
From 30 t.. Rub. - is free.
Delivery of small-sized cargo in Moscow in the Moscow region is individually.

Delivery of bulky cargo in Moscow and the Moscow region - Indianadually.

We will definitely agree with you a convenient delivery time.

Delivery to regions of the Russian Federation

Carried out by transport companies. We cooperate with all major transport companies.
Choice transport company It depends on your wishes and stipulates with each client individually.
The cost of shipping shipping to the transport company terminal is free.

Delivery by Russian Post

At your request, we will send an order through the FSUE "Post of Russia".

To twist fasteners (bolts, nuts and screws), a manual tool is used. Below is a list of manual tool, without any auto mechanic can do. Specialized tool in this list is not included.

You had to take some kind of tool for breaking several times? So you need to buy it!

Most of the car mechanics will not refuse their young colleague in the request to borrow sometimes one or another tool. But if some tool needed for you several times, - buy it as soon as possible. In addition, returning a tool taken off, check that it is clean, and return it to the hands of what you took it. Thus, you will strengthen the confidence of your colleagues.

Set of 1/4-inch connecting sketch
Cutting with 1/4-inch connecting square equipped with a snoring mechanism
Two-link extension to the end heads with 1/4-inch connecting square
Six-tech extension to the end heads with 1/4-inch connecting square
Curlon with 1/4-inch connecting square
Set of end heads with 3/8-inch connecting square
Set of heads TOX with 3/8-inch connecting square
Intor head under 13/16-inch cork, with 3/8-inch connecting square
The end head under a 5/8-inch tube, with a 3/8-inch connecting square square, equipped with a snoring mechanism
One-and-a-half extension to the ends of the head with a 3/8-inch connecting square
Three-link extension to the elder heads with a 3/8-inch connecting square
Six-tech extension to the elder heads with a 3/8-inch connecting square
An eighteen-seamy extension to the brass heads with a 3/8-inch connecting square
Universal hinged link to the brass heads with a 3/8-inch connecting square
Set of 1/2-inch connecting sketch
Curlon with 1/2-inch connecting square, equipped with a snoring mechanism
"Breaking" Gorog Long Length with 1/2-inch Connecting Square
Five-linked extension cord for elder heads with 1/2-inch connecting square
3/8-inch adapter for 1/4-inch connecting square
1/2-inch adapter by 3/8-inch connecting square
3/8-inch adapter per / 2-inch connecting square
Set of combined wrenches with a landing size from 3/8 inches to 1 inches
Set of combined wrenches with landing size from 10 mm to 19 mm
Set of wrenches under fastening with an internal hexagon, with a landing size of 1/16 inches to 1/4 inches
Set of wrenches under fasteners with an internal hexagon, with a landing size from 2 mm to 12 mm
The end head under fastening with an internal hexagon, with a landing size of 3/8-inch
Caid wrench 13 mm / 14 mm (with a split head having hexagonal zev)
Caid wrench 15 mm / 17 mm (with a split head having hexagonal zev)
Caid wrench 5/16 inches / 3/8 inches (with a split head having a hexagonal zev)
Caid wrench 7/16 inches / 1/2 inches (with a split head having a hexagonal zev)
Caid wrench 1/2 inches / 9/16 inches (with a split head having a hexagonal zev)
Bands bags
Ostrogubs
Adjustable key (Swedish)
Clamp pliers (with fixation)
Expander for mounting / dismantling of stop rings
Electrician pliers Calculate or crimping
Hammer with a ball bridge
Rubber head hammer
Understandable hammer (with an inelastic blow)
Set of five screwdrivers with flat sting
Set of their four screwdrivers with cruciform polar filips
Screwdriver Togh number 15
Screwdriver Togh №20
Set of horn plugs type "goose paw" (inch)
Set of horn plugs type "goose paw" (metric)
Personal file
Kerner
Purifying (different sizes)
Chisel
Folding knife with several blades
Tool for servicing spools
Tester for checking cooling systems
Key to dismantle filters (large sizes)
Key to dismantle filters (smaller sizes)
Electric tester
Calibal probe for measuring gaps
Scraper
Mount
Knife with retractable blade
Magnetic property
Dynamometric Key
Micrometer on the range of 0-1 inches
Micrometer for 1-2 inches range

Why did Phillips become the generally accepted name of one of the types of screwdrivers?

In 1936, the inventor Henry Philips (Henry M. Phillips) patented a screw with Phillips type head. The cruciform slot on the head of this screw does not reach its edge, so the sting of the screwdriver is always fixed in the center of the screw head.

Fig. Safety glasses - the most necessary accessory of any tool set

Fig. Combined wrench. Both key heads are designed for the same bolt head. Please note that the Horn head is turned at an angle to the key handle to make it easier to work in close places.

Fig. Three horn keys of different quality. The cheapest (left) is made of fragile steel, it is thicker and gross standard key (in the center). On the right shows the key of professional quality (and the corresponding price)

Do not use such a tool

A young mechanic who came to work in the workshop, coming to work on the first day, put his drawer with tools on the workbench. Another mechanic seeing that in it, along with a complete set of high-quality tools, lies several adjustable keys, said: "Element it away from the eye of the superiors." The moving sponges of the adjustable key often slip on the surface of the head of the bolt or nut, twigrating sharp edges, and to promote such a damaged fastening item becomes much more difficult.

Fig. Caid wrench with a split head having a hexagonal zev. Also known as the "plumbing", "plumbing key" or "pipe key". Zev of this key covers most of the strings of the hex profile of pipe fittings and allows you to maximally capture the item, without damaging it

Fig. Caid wrench with a ring head. It is recommended for loosening and tightening bolts and nuts in cases where the end key cannot be used. Heads on both sides of the key have a different number. Such key is preferable to the horn key, because it covers the bolt head around the perimeter, and not just on both sides, like a horn key

Fig. The horn wrench is a general-purpose tool. Heads on both sides of the key have a different landing size (number). The horn key should not be used for tightening "until the stop" or loosening strongly tightened threaded compound Due to the danger of his breakdown from the head of the bolt or nut

Fig. Screwdrivers with flat sting (left) differ in length and thickened sting. The sting in thickness should correspond to the width of the slot on the screw head. Screwdrivers under the head of the Phillips type (right) differ along the length and size of the "Piglet" on the tip of the sting. The smallest "patch" at a screwdriver Philips No. 1, at the screwdriver Phillips No. 2 (it is shown in the photo) - it is more common - it is more. The most stupid tip at the screwdriver Philips No. 3, designed to work with the largest screws

Acceptance using grinding paste

Apply a bit of grinding paste used to wipe the valves on the head of the bolt or screw. She "grab" sting a screwdriver or another tool, not allowing it to "break" from fasteners. Such a paste in tubes can be bought at any auto parts store.

Fig. A variety of ticks. Combined pliers (extreme left) are often confused with plumbing clamps (second left)

Fig. Hammers with a ball brisk (at the top) existing on sale differ in the weight of the head (usually indicated in ounces). Below shows a hammer with a soft (plastic) brought. The hammer head should always be softer (possess higher plasticity) than the material being processed. To avoid damage in the processing of cast-iron or steel engine parts, laying between them and a hammer with a steel head of a tree bar or similar material.

Fig. Different kinds Shorts of end keys

Fig. Various options for extension cords (extensions) of the end heads. Universal hinged oven shown in the center (bottom), convenient to work in hard-to-reach places

Fig. The end heads are twelve marked, hexagon and eight-marched. It is better to use hex heads as they cover all six facets of a standard bolt head or nut, allowing you to make more effort without breaking the edges of the head

Fig. The hexagon head is adjacent to all the faces of the head of the bolt or nut. The twelve head when applying excessive effort can "disrupt" the edges of the head of the bolt or nut

Fig. Intor heads: Standard twelve chamber short (left), hinged (center) and elongated (right). Last two - hexagon

Fig. Standard files. Never use a file without a handle

Fig. Mechanical collet grip (at the top) and telescopic probe with a magnet at the end (bottom) are an indispensable tools if you need to get a small part that fell into such a place where you can not get to the fingers

Fig. Stethoscope - With it, the mechanic "listens" the engine, looking for a place from which suspicious noise

Fig. Typical sharpening machine. Pay attention to the installed on it protective screen.. But, although the screen and provides certain protection for the eyes, working on such or any other machine. Be sure to protect your eyes with protective glasses.

Fig. Hack saw. Tubes of the hacksaw blade must be oriented towards the saw handle. The thinner of the sawn material, the smallest should be the teeth of the hacker canvase

Fig. Drill (at the top) with spiral grooves (grooves) and sweeping (bottom) with straight cutting edges

Fig. Cutting edge of the drill

Fig. Diverse Boots (Left) and Chisel (Right)

Fig. The battle of this chisel was spun, and this is dangerous. When hitting the hammer on such a chisel, the sharp shards of the metal can be broken down and damage you. Having found a tool with an intertwined brine, stripe the intellined part, as shown in this photo. This will avoid the danger of injury (b)

Fig. Thread cutting using hand ds

Fig. Tagged - rough and finishing. Cutting testers are usually used to clean or update the existing thread in detail.

Fig. Dies are used to cut the outer thread on cylindrical rods, and taps - to cut the inner thread in the holes

Fig. Setting the tap in the drilled hole. To obtain the required gap in the thread, the hole diameter must accurately match the size of the tap. The drill of the corresponding diameter is called a drilling under the thread

Fig. For ordered storage of small parts is convenient inexpensive cellular tray

Fig. To work, a good portable luminescent lamp is very necessary. The fluorescent lamp is heated not as much as the incandescent lamp, and will not cause fire with a random hit of gasoline splashing, unlike unprotected incandescent lamps used in some emergency lamps.

Fig. To begin with, it is enough to have a set of only the most required tools. Experienced, highly skilled auto mechanics spend annually thousands of dollars to buy a tool, such as what is assembled in this large (and expensive) toolbox

In the trunk of any motorist there is a tool for repair work. Some are a few spanners, a hammer, a pair of screwdrivers and pliers. Others - a full set of fitting and assembly tool, such as a set of auto mechanics NIA-1..

Set of auto mechanic NIA-1. Allows you to perform assembly and dismantling work in the process of maintenance or during the repair of motor vehicles of domestic and foreign production. The thoughtful combination of the tool included in the set, its quality and low price do NIA-1. An excellent alternative to foreign tool sets.

The auto mechanic set includes a wide range of wrenches combined keys, combining the functions of the horn and cape. The presence of this type of keys allows you to reduce the total amount of the tool in the set and reduce the weight of the set itself. And also gives one undoubted advantage: if when working a horn key, you will need a cape of the same size, it is only worth turning the key to the other side - and not to look for a suitable bag with tools!

The ratchet key will help the car mechanic to work in a limited space. Due to the presence of a ratchet in the key design, it disappears the need to rearrange it when unscrewing fasteners. Tools NIA-1. It is also completed with the end heads with a size of 8 to 24. The end heads allow you to unscrew without damage any fastener, because Contact him throughout its height. Due to this, it is prevented "rounding" faces of fasteners. The end-in-one in the set includes standard candle heads (16 and 21 mm), which allow you to quickly and without effort to replace the spark plugs of gasoline engines. Stall tool included in the auto mechanic set helps when Assembly works, and gloves protect the hands of an auto mechanic from dirt and damage. And the tool is packed in a solid bag, which is convenient when carrying and takes up little space in the car enthusiast trunk. The tool is made of high-quality materials providing its frequent use and high loads during operation.

Technical data
Composition of set
1. Conference wrench combined 8x8 - 1pc.
2. Welcome combined 10x10 - 1pc.
3. Welcome wrench combined 12x12 - 1pc.
4. Welcome wrench combined 13x13 - 1pc.
5. Welcome wrench combined 14x14 - 1pc.
6. Welcome wrench combined 17x17 - 1pc.
7. Welcome wrench combined 19x19 - 1pc.
8. Welcome wrench combined 22x22 - 1pc.
9. Welcome wrench combined 24x24 - 1pc.
10. Torch head 8 - 1pc.
11. headband 10 - 1pc.
12. headband 11 - 1pc.
13. head head 12 - 1pc.
14. headband 13 - 1pc.
15. headband 14 - 1pc.
16. headband 15 - 1pc.
17. head head 17 - 1pc.
18. headband 19 - 1pc.
19. headband 22 - 1pc.
20. headband 24 - 1pc.
21. Hands Candle "16" - 1pc.
22. Hands Candle "21" - 1pc.
23.Sharnir - 1pc.
24. Saluer, 250 mm - 1pc.
25.Clotchka - 1CT.
26.Well with attachment. Square large, 300 mm - 1pc.
27. RECEPTURE SLADE 8.0х150 - 1pc.
28.Thistener slotted 6.0x150 - 1pc.
29. Conductive Condition No. 2x100 mm - 1pc.
30.The is a cruciform №3x150 mm - 1pc.
31. Summer 160 mm - 1pc.
32. Millet 500 g - 1pc.
33. The surpars combined 180 mm - 1pc.
34.Powers lateral 180 mm - 1pc.
35.Locks adjustable 250 mm - 1pc.
36. PVCs knitted PVC - 1pc.
37.Reight of ball - 1pc.
38. BlockNot for entries - 1pc.
39.Sumka - 1pc.

Professional locksmith tool for car service is an important component that allows us to ensure proper quality of services. It is necessary for performing work at a high level and coverage of the entire spectrum of auto repair operations. Buying reliable, high-quality we invite to spend in our online store. "Automaster" represents best manufacturers And offers maximum full list Required autoinstrument.

Our range

In our store you can buy King Tony, Mastak, Stahlwille and Stels products. It is offered in a wide range, allowing you to fully equip the car service from scratch. The sale presents:

The tool in the lodges is convenient solutions for organizing professional jobs along with instrumental trolleys and locksmiths. Huge selection of sets: mono, mixed, special. The entire list of necessary accessories: from nozzles and probe to filter pulse, measuring and test equipment. Also - ready-made sets of lifesters with the number of trays from 9 to 17.
Tool trolleys are mobile jobs for auto showing with a complete set of tools in lifes. Solutions with various designs of carts and equipment: standard, master, pros and expert.
Dynamometric keys and adapters are equipped to work with responsible fasteners requiring control of tightening force. Large selection of inventory: Dynamometric keys and screwdrivers, electronic adapters, torque amplifiers. Also a complete selection of knobs and repair kits for self-substitution worn items.
Car repair keys - a full range of wrenches for buying one by one and in sets. Rozhkovy, precipitated, combined keys, end and ratchet. For hard-to-reach / narrow sections - with a hinge, curved profiles. Special keys: balloon, candle, cut, starter, etc.
Sets for a car - universal sets of equipment for work on the road and in the workshop.
Auto tools in drawers and suitcases, a special dielectric tool for electrical operations.
Screwdrivers and replaceable sting - supplies for nuts, clamps, power, dielectric, with various profiles and sizes. T-shaped screwdrivers for improved grip.
Hinged and globe, shock, cutting and measuring instrument: a complete list of equipment required for repair, plumbing and installation work.
Facial and special heads are a huge selection of nozzles for assembly and plumbing operations: standard, shock, special, thin-walled, short and deep, with various square sizes. The whole range of profiles used: from special 4-faceted, radial to standard 6 and 12-graded, and the so-called e-neck TORX.
Accessories for end heads: ratchets, cardanis, grooves, extension cords, adapters, as well as repair kits to them.

Online store "Auto industryPort" sells professional tools for maintenance stations for various purposes. To buy a car service tool in Moscow at a low price in the online store, you need to checkout the order via the basket or contact our managers using the callback service. We have every specialist will pick up the necessary and high-quality auto tools for itself, the cost of which is available for both the car service and individuals. By purchasing tools with a set, disappears the need to buy everything you need separately.

Professional special to the car service allows you to work on the repair of cars of any complexity, therefore is the most popular in this industry. Sets are used as repair passenger carsand for freight car cargo.

How to order Tools for car service

In our online store provided wide selection Tools for a service station, such as: sets of hydraulic and pneumatic devices, devices for disassembling and assembling various nodes, the cost of which depends on the company manufacturer, configuration and materials used in their production.

To unmistakably order the special purpose of the special purpose toolkit, you need to get acquainted with the main technical characteristicsFrom which prices depend. High quality manual devices that match all technical requirementsallows repair work passenger cars And trucks in the most difficult conditions where the use of machines is impossible.

Special tools in Car service

Auto Industry Each year we go to an increasing level. There are increasingly perfect and modern cars, All the more technological and multipurpose equipment for their repair are produced. However, it was still not possible to replace the work of the auto show masters, performed by hand tools. This is exactly what determines the need for any service and a hundred in professional silent assistants. It remains only to decide on specific positions and brands.

Choose professional tools for car service and one hundred

Warehouses of our online store are based in Moscow, therefore special tools from world-made leaders come to us directly from America, Asia and Europe. In addition, our specialists have many years of experience of equipping a hundred. They know that the speed and productivity of labor depends on the correct and rational selection of instruments for the car service. And the opposite situation will make the work of masters more burdensome, and it is often impossible at all. Based on this, we have made every effort to form our range of the most necessary, high-quality and reliable tools for the service station. We are not the first year to sell their sales, and therefore we can guarantee the following:

you can buy tools from proven manufacturers who have proven themselves not only in foreign, but also in the domestic market, and comply with Russian ideas about convenience and security;
our specialists are always ready to advise you and assist in choosing tools that will make the work of masters in a car service efficient, comfortable and high-yield;
direct contracts with manufacturers make it possible to establish attractive prices on products without prejudice to the quality of the goods itself and the additional service we offer;
we are constantly updating the assortment of tools for car service and follow the innovations of the industry, so in the course of the last trends and we are glad to share them and with you, offering only modern products;
in addition to universal components, we will find highly specialized tools that will allow you to expand the range of services provided, attract new customers and get a unique advantage over competitors;
we only work with proven manufacturers and carefully track their reputation and responses to the tools produced by them for car service, because we are not all as much as you have to enjoy our customers.

The reserve of tools in our warehouse is constantly updated and complemented, and you can track all changes in the catalog of our online store. If you did not find what they were looking for, let us know our specialists about it, and we will try to help you. Tools are justified, and high-quality tools are an excellent opportunity for the development and long-term prosperity of your business.