UAZ 452 is in great demand among lovers of hunting and fishing. High permeability, unpretentiousness and large capacity are the main advantages of the car. However, due to the lack of comfort, many drivers resort to altering the interior and technical equipment Do-it-yourself UAZ "loaf"
Specification change
The original improvement of the salon "loaf"
Given vehicle needs to technical improvements. In this case, the "loaf" scheme is used. The changes are associated with the installation of differentials designed for increased friction. Such tuning of the UAZ "loaf" will allow not to tear the transmission, which is characterized by a hard lock. If necessary, you can install long springs. As for the choice of shock absorbers, it is recommended to give preference to the Rancho 5000 model.
For UAZ "loaf" tuning provides for the installation diesel engine and stabilizers on the rear and front axles, and disc brakes. Auto mechanics recommend strengthening the rigidity of the frame with their own hands. To do this, use a stretcher.
After viewing photos of tuned UAZs, each owner of this car can decide on the style in which he wants to decorate his SUV. If possible, the standard steering wheel is replaced by the steering wheel from Sobol. This design is easily rotated due to the ZF hydraulic booster. With the help of additional devices installed in the cabin, it will be convenient for the driver to control the operation of each system.
Salon modernization
If you have a "loaf", interior tuning may include the installation of seats from BMW. Another option is do-it-yourself seat upholstery. Modernization gives the seats additional comfort and lumbar support, which will allow the driver to be behind the wheel for a long time.
The interior trim will be non-standard if you install an electric sofa in the "loaf". Its operation can be controlled using the remote control. If you press a certain button, the sofa will turn into a bed. With the help of the remote control, the sofa folds easily, and a table appears in its place.
Another interior design option
Such modernization will please not only the owner, but also UAZ passengers. The hatch provided in the ceiling of the "loaf" is not equipped with an automatic drive. For its easy opening and closing, you can install a special mechanism. Increasing the comfort of riding in such vehicles is facilitated by the installation of a TV with DVD in the cabin.
Tuning "loaf" provides for the refinement of the trunk. Here you can make a safe that will be opened using the remote control. On the roof of an SUV, some install an impromptu balcony, which requires an appropriate drawing. In addition to the headlights, they mount hi-jacks and a spare tire with their own hands.
As additional option a crane is mounted on the roof of the "loaf". This design includes beams, a roller and a winch. This faucet is easy to assemble and disassemble. It allows you to lift a load weighing up to 500 kg.
If you are the owner of old UAZ models, then there are a large number of companies that will improve the interior of the UAZ loaf. In just a few days, professional craftsmen will replace old uncomfortable accessories with modern models, which will not only add comfort during long-distance travel but also additional security.
The entire process of upgrading the cabin must occur sequentially. There are several main stages where it is worth working:
- Set up a comfortable seat or sofas
- Replace dashboard
- Install convenient partitions to separate cabin areas
- Replace floor coverings and upholstery
- Install shelves and handrails that will add convenience to passengers
- Replace steering wheel
In fact, modern industry and the genius of designers allow tuning the interior of the UAZ loaf indefinitely. By far the biggest limiting factor is the amount of funding available.
Changing the upholstery of the UAZ "Loaf"
Typically, the manufacturer covers the interior with carpet or similar material, but during hunting or fishing, such material will become excessively dirty. Usually they replace it with:
- Plywood
- sheet steel
- wooden sheets
- aluminum sheets
Each material has its own advantages and disadvantages, but corrugated aluminum sheets are the most commonly used. This material is ideal option, as it is quite easy to wash and does not corrode.
Of course, if the ability of the interior to be washed is not critical for you, then you can easily choose any other material. Today you can find on the Internet on the request "uaz loaf tuning interior photo" a huge number of photos in which you can evaluate the visual characteristics of the material.
Replacing seats in the UAZ cabin
The seats, which were developed by the Ulyanovsk Automobile Plant, have a terrible design and are absolutely not suitable for extreme off-road travel. Even a driver who accurately assesses the traffic situation has a hard time - after an hour of such a journey, the muscles suffer from discomfort.
It makes no sense to repair or improve the "native" seats. Absolutely all workshops replace them with better foreign or domestic models. When choosing seats, remember that not all seats are suitable for the UAZ Loaf, as their width is important.
Pay attention not only to the price of the selected chairs, but also to their quality, material and performance characteristics. Often there are situations when the replaced seats interfere with the opening of the hood to access the engine, which is absolutely unacceptable.
Steering wheel replacement
The regular steering wheel is quite inconvenient and cumbersome, which significantly affects the comfort of driving such a car. The steering wheel on the UAZ loaf can be improved in several ways:
- By setting steering wheel from another vehicle
- By placing a fabric braid
- By setting sports model rudder
There are many domestic models sports steering wheels, which significantly improve the vehicle's handling in off-road conditions. There are leather and rubberized options that can be easily installed.
The choice of a new steering wheel is limited only by its cost and the availability of certification documents that allow the use of this device.
Remember that in the absence of the latter, you will not be able to pass technical inspection, which will subsequently impose a number of restrictions on the use of such a vehicle.
Improvement of the passenger part of the cabin
It is important to upgrade not only the driver's part of the car, but also to provide passengers with sufficient comfort. In fact, the cabin space becomes your second home during extreme travel.
Today you can create comfortable lounge with all the necessary contents, where you can easily spend the night. Masters can easily place a large number of cabinets and a certain number of beds there.
These design changes have little effect on driving performance car - you have nothing to worry about during long trips.
To solve the problem of energy efficiency, a sunroof often cuts into the roof of the passenger compartment. The hatch opening provides additional access to sunlight and light, which significantly reduces fuel consumption for lighting. On a hot day, an open hatch will give a breath of fresh air, which your passengers will be immensely happy about. In addition, hunters can shoot game without leaving the car.
So, despite the fact that the UAZ Loaf interior in its factory version is rather inconvenient, today's technologies make it possible to turn it into a work of art. Be sure that such improvements will turn hunting or fishing into a real vacation, during which you can truly enjoy the company of your friends.
Production of the legendary domestic car UAZ-452 was launched back in 1965. The Ulyanovsk Automobile Plant was given the task of creating the most reliable, durable car that could easily cope with all the obstacles in its path. UAZ engineers coped with their task - outwardly similar to a "loaf" of bread, the car fit for the tasks of escorting a tank column.
It is quite natural that at that time the main production forces and engineering thoughts were aimed at creating the most simple, but extremely reliable car, therefore, the minimum amount of time was devoted to the comfort of the cabin and ease of use of the car. Many domestic motorists today prefer this personalized car, and not a modern one. foreign analogues. There are actually several reasons for this: the low price of a car, reliability, ease of operation, the unlimited possibility of displaying imagination for tuning the interior of the UAZ Loaf.
Interior tuning UAZ "Loaf": what can be improved?
"Loaf" has always been highly valued among drivers and, even today, when automotive market a huge number of foreign SUVs, few wish to say goodbye to the brainchild of the Ulyanovsk Automobile Plant. UAZ-452 is so simple in terms of design that everything in a car can be improved and modernized.
Today, many craftsmen carry out not only tuning the interior of the Loaf with their own hands, but also improve the suspension, give the car additional stability. In general, speaking - they are doing everything to create the most convenient and suitable for traveling to.
What can be done with the UAZ Loaf salon:
- Replace native seats or sheathe them with foam rubber;
- Install new steering wheel with electric or hydraulic booster;
- Implement thermal insulation;
- Install a sunroof in the cabin;
- Put another ;
- Equip with additional equipment.
In general, everything can be changed and improved in the UAZ-452 cabin, the main thing is that there is enough imagination and money.
Replacement of native seats
When it comes to refining the Loaf's interior, first of all, most car owners complain about uncomfortable seats. And here a dilemma arises - to modify the native seats with foam rubber, or to install new seats from another car. It is impossible to say unequivocally which is better.
On the one hand, it is easier to install new chairs and not waste time on improving old ones. That's just free space in the passenger and driver's seat is not so much. It is impossible to install any foreign-made chairs. If we talk about Russian counterparts, then seats from the “nine” or from Moskvich-2141 can be installed in the Loaf salon.
You can also borrow chairs from the following foreign cars:
- Honda Civic;
- Toyota RAV4;
- Opel Astra;
- Passat B3.
It is important that the seats are not too high, otherwise it will be inconvenient to drive the car. If frequent hunting or fishing trips are planned on the Loaf, then it will not be superfluous to organize comfortable sleeping places and a folding table in the cabin. In the rear passenger compartment, it is desirable to replace the "native" lighting. There are a lot of interior ceiling lamps, it will not be difficult to quickly land any battery. The way out of this situation is as follows - replacing conventional light bulbs with LED lights.
Installing a new steering wheel
Tuning the interior of the UAZ "Loaf" is not complete without replacing the steering wheel. Many car owners are not satisfied with their own "steering wheel". From the standard steering wheel, hands quickly get tired during long trips, so many owners, when tuning the UAZ-452 with their own hands, first of all replace this particular component of comfortable driving. But this issue also has its difficulties. The fact is that it is not so easy to pick up a better steering wheel according to the slots.
Interior tuning photo from patriots of the domestic auto industry using the UAZ 452 Loaf as an example
Most car owners opt for the steering wheel from the Gazelle, but without additional alteration it will be too high. As an alternative - the installation of a specially adapted steering wheel for the UAZ-452. Today, such devices can be found in almost every automotive store. If there is no special desire and opportunity to replace the steering wheel, then you can get by with a simple braid on the rim.
Making interior insulation
For supporting comfortable temperature in the Loaf salon, it is best to make thermal insulation during tuning. All work does not take much time - it is enough to lay plywood, foam rubber and insulation with your hands. Expanded polystyrene can be used as a heater. It is quite easy and simple to lay in hard-to-reach places due to the flexibility of the material.
But such a material has drawbacks - it is highly flammable and emits during intense heat harmful substances. Therefore, the choice of this insulation depends purely on the purpose of the car and the climatic features of the region. In addition to expanded polystyrene, penofol is also common - foamed polyethylene with a layer of foil.
Installing a new dashboard and sunroof in the UAZ-452
Another drawback of the "Loaf" is a primitive dashboard with a minimum of information. In order to somehow embellish the “tidy” and make it more attractive, car owners paste over it with a film. But what about non-informative devices? In this case, only self-tuning will help. There are only two solutions: installing a new panel, for example, with GAZ-3110, or equipping the panel with additional equipment to the maximum.
You can install the following:
- Navigator.
- DVR.
- Touch recorder.
- Anti-radar.
You can equip the panel with a large number of different devices, there is plenty of space. Also, for a constant flow of fresh air into the Loaf salon, the organization of a hatch will not be superfluous. To do this, you need a welding machine, drill, grinder. The work is quite painstaking, but the result will exceed all expectations.
There are a lot of various variations of tuning the Loaf salon with your own hands. UAZ-452 - quite simple, but unique car, giving absolute freedom of action to the owner, which is limited only by their own imagination and money. You can even install an automatic sofa in the car interior, purchase DVDs and various modern devices that greatly simplify life and help pass the time, relax and unwind after a long trip.
The production of the legendary UAZ-452 began back in 1965. Ulyanovsk car factory took on the following task - to create the maximum reliable and durable car that could easily cope with every obstacle on the way. UAZ engineers managed to cope with this task - a car similar to a bread "loaf" was perfect for tasks such as escorting tank columns.
It was quite in the order of things that in those distant times the main forces of production and the thoughts of engineers were directed towards the creation of a very simple, but at the same time to the limit reliable car, therefore, very little time was devoted to the comfort of the cabin and the ease of use of the car. Many domestic motorists in our hour would prefer such a car, rather than modern analogues from abroad. The reasons are actually even wider: a fairly low price tag, an acceptable level of reliability, ease of operation, unlimited possibilities for manifestations of fantasy, which is important in such a task as tuning the interior of an UAZ loaf.
- You can carry out the following tuning of the cabin:
- Replace the factory seats, or sheathe them with such material as foam rubber;
- Installation of a new steering wheel with reinforcements;
- Perform thermal insulation;
- Carry out the installation of the saloon hatch;
- Replace dashboard;
- Install additional equipment.
- Replacing original seats
It is important that the seats are moderately compact, otherwise the control of the loaf will be inconvenient. If constant trips are planned on the vehicle, then you can even organize sleeping places or a folding table. It is desirable to modify the rear passenger compartment with new lighting. Cabin ceiling lights are able to instantly drain any batteries, so it is recommended to replace standard light bulbs with LED-type solutions.
Most car owners like the Gazelle steering wheel, but without additional alterations it will be a bit high. Alternatively, a steering wheel specially adapted for the loaf is installed. At the moment, such things can be found literally in any automotive shop. If you do not have the desire or opportunity to replace the steering wheel, it is enough to limit yourself to an ordinary rim braid.
Tuning the car interior of this model can also be thermally insulated. Not so much time will be taken to work - you just need to lay plywood, foam rubber and insulation material. Expanded polystyrene is quite suitable as a heater. It is quite light and easy to lay in hard-to-reach parts of the loaf due to the flexible properties of this material.
You can equip the UAZ loaf with a do-it-yourself photo with a vast number of assorted gizmos, the benefit of the place is with a margin. Also, for constantly fresh air currents, it will be possible to organize a hatch. Here the apparatus for welding, a drill and, of course, an angle grinder will be used. You will have to work in a painstaking mode, but the results will exceed all conceivable expectations.
At UAZ Loaf, tuning the body and interior is not particularly difficult and can be done on your own. Reworking a car is attractive due to the ease of making changes, the availability of spare parts and necessary equipment. Having excellent cross-country ability and reliable power plant, the car is deprived of comfort, because it was designed for power structures, transportation of oilmen and geologists. Therefore, most of the effort and resources are spent on modifications to the UAZ-452, which create comfortable conditions for the driver and passengers.
body tuning
The appearance of the car creates an impression of its owner.
Engineering can take place in a number of ways:
- Application of protective or camouflage coloring. Select summer or winter version depending on priorities.
- Installation of a snorkel to overcome water obstacles.
- Installation of powerful halogen or LED headlights.
- Strengthening the frame by welding steel plates on the factory joints.
A laborious but interesting solution is to convert a closed van into a convertible. In this case, it is planned to install powerful safety arches and sew an awning.
These are the main directions of body modification. There are some other details that affect the exterior and functionality of the vehicle.
DIY trunk
In order not to fill the usable space inside the body with camping items, it is advisable to make a large one on the roof of the car. forwarding trunk with stairs.
For work you will need:
- roulette;
- welding machine;
- Bulgarian;
- square;
- spanners;
- screwdriver;
- drill;
- dye;
- paint brush;
- profile pipes.
After drawing up the drawing of the product, blanks are cut. Then welding, cleaning, painting, installation of the trunk and its fastening to the frame and safety arcs are carried out.
Bumper
If you plan to use the car for driving in difficult terrain, then you need to equip reliable protection for a radiator that can be pierced by a tree trunk or other hard object. The best option a lattice of profile pipes is considered.
See » How to make a snow plow on a UAZ with your own hands
A preliminary drawing of the bumper is made on the UAZ-452, which indicates the configuration, location and method of attachment to the frame. Staining is done with black paint or to match the body. rear bumper it is advisable to convert it into a step for the convenience of loading people and luggage.
Interior trim
The internal space inside the UAZ Baton body is large enough to accommodate comfortable soft chairs, kitchen furniture and cooking appliances. UAZ Loaf interior decoration should begin with the replacement of the inner lining and the installation of more powerful electrical wiring. It is advisable to paste over the floor, walls, doors, ceiling with heat-insulating materials and upholster with leather or its equivalent. Autonomous lighting with night mode will not interfere. At UAZ Loaf, do-it-yourself interior tuning is a matter of taste.
At UAZ Loaf, interior tuning is not limited to external and internal decoration. Such a useful alteration, like a shelf, will make moving and life on a halt much more convenient and enjoyable. The best option is its placement above the windshield. With a width of 145 cm, the product has a depth of 20 cm and a height of 12 cm.
Niches are made in the plywood shelf for the following fixtures:
- radio tape recorders;
- hours;
- columns;
- small things;
- spotlights;
- light switch.
The resulting part is pasted over with foam rubber and upholstered with fabric.
Sofa
If the machine is intended for hunters and fishermen, you can not spend money on purchased products.
The change is done like this:
- remove old fabric and filler from the seats and backs;
- apply a 10-centimeter layer of foam rubber to the bases;
- cover with tarpaulin.
Get soft and wear-resistant places to rest.
To achieve greater comfort, folding sofas are made, which, after transformation, occupy the entire or larger floor area in the cabin. Upholstered furniture is made from timber, plywood and foam rubber. Depending on the chosen design, the sofas are laid out forward or to the side. The base is fastened with bolts to steel guides screwed to the frame.
