Battery charger is a need if you are a supporter of an economic and rational approach to energy. It is well known that one pushed battery contaminates a fairly large area of \u200b\u200bfertile soils, and significant production relics are used for its disposal. Universal charger For batteries, for example, Robiton (Robiton) or Samelion with an indication can save your tools and help the environment.

Agree, in the modern world, nutrition elements play a huge role. They can be found in any household appliance, ranging from wall wrappers and cameras and ending with children's toys. We will deal in more detail how much to charge the battery and whether it is possible to charge ordinary, cheap batteries.

There are homemade and professional intelligent chargers. The latter are suitable for all types of battery-type batteries. Well, homemade devices are characterized depending on the laid configuration.

Charged in factory products (Robiton, Camelion) Aa, aaa, s, d and crown batteries. You can completely fill the capacity of the discharged battery, or periodically recharge it.

The devices can be divided into two types:

1. Simple. They only have a charging function, and you do not know how much time will take the capacity of the tank. In terms of cost, they are much cheaper. If you are not so many batteries and charge them rarely, such devices are quite acceptable for you.
2. Multifunctional. Many devices have an indicator that shows the degree of battery population, charge level. Power can be adjusted, and various configurations allow you to use them and for disk batteries, and for finger.

The charger for all types of batteries was widespread. There are even models on solar panels. You can buy homemade cheap devices on the market or from the hands of masters. But, in any case, it is worth giveing \u200b\u200bpreference to professional instruments, because only you provide a guarantee.

What batteries can be charged

Without a charger, there would be no question that batteries can be charged. We will try to answer it.

Universal charger operating on solar panels or from the network, can replenish the batteries voltage of different types. Can be settle the container salt, , Silver batteries.

Carefully choose not only the charging element, but also the batteries. As a rule, the cheapest salt or alkaline batteries are not subject to recharge. The device can lead to overheating and explosion of the battery.

Good batteries are more expensive, but they maintain a lot of recharging cycles without losing their power.

You can choose a battery that will charge, based on the marking on it:

• Do not wait for large voltage indicators. In conventional power items, it is 1.6 V, and Rechargeable indicator below .
• If the manufacturer has indicated battery capacity in milliamperes then it can be recharged.
• Inscription in English "Rechargeable", indicates that you buy a rechargeable element.

It is also worth paying attention to the materials from which the battery is made, the speed of its self-discharge and the maximum issued voltage.

Charger rating

Before choosing the best device, you need to determine what criteria must be guided by purchasing.

The consumer should pay attention to the following indicators:

• Rapiditycharging.
• Availability multiple slots For batteries, a variety of their species. After all, it makes no sense to buy charging for batteries type D and C, if you use AA and AAA.
• Availability charge indicator . In order not to spoil the battery and the device, the indicator will prompt the owner that the battery is fully charged. So you do not overheat the device, save electricity and create fireproof conditions around yourself.
• Ability to determine the capacity power element. Over time, due to the frequent operation and many cycles, recharging the battery cease to perceive incoming electricity. And this function allows you to understand, the battery is working or not.

1. SKYRC MC3000.Charging has a USB 5 V / 2.1 A output and Bluetooth 4.0 function. Charges AA and AAA batteries. It is expensive, but high quality.
2. Opus BT-C3100.Ability to charge the most common types of batteries (AA, AAA, AAAA, C). There is an automatic overheating indicator and forced cooling.
3. Liitokala Lii-500 and Joinrun S4. There is a function of measuring the capacity of batteries.
4. E-SYB E4. The ability to connect. There is Bluetooth and USB input.

More budget charges offer already mentioned firms:

1. Robiton. Robiton models widely known to consumers - Smart S100, Universal 1000 LCD, SD250-4.
2. Samelion. Pay attention to the BC-1010, BC-1007, BC-0658-SM-EU model. This is one of the best universal devices for quick and efficient battery charging.

The cost of devices varies from 10 to 100 dollars. The price affects the brand itself and, of course, functionality.

Is it possible to make a charger for batteries and batteries with their own hands

Charger for different batteries craftsmen can make from progress. Children's toys, charging from mobile phones and stationary phones, fees and more. Schemes and video lessons can be viewed on the Internet. For the manufacture of the device, you will need a soldering iron, a set of screwdrivers, source spare parts, a voltmeter, a small knife (for stripping wires).

The homemade charger at a competent approach can replace the devices of firms and Robiton, and Camelion. But if you have never come across equipment and electrical equipment, it is better not to experiment, but buy a ready-made factory device with a guarantee of quality.

Considerable amount of all kinds household appliances And electronics runs on batteries of various types. From among gadgets, where their use is most in demand, there are cameras, repair tools (drills, screwdrivers, etc.), lights, sound recordings and a lot of other. Theoretically, all of the above equipment can be used by conventional AA and AAA batteries type (provided that the devices are compatible with them) that are sold literally in each store (Dusells, Energizheizers, etc.). But in practice, in most cases it is just unprofitable, since they are sitting very quickly. It is more expedient to use rechargeable batteries (according to the habit of them are also often called batteries). With proper charging, they are able to work from 200 to 500 cycles (depending on type and quality). But for the full operation of such AKB, you must have a special charger (memory). Choose this device is based on the tasks that will be placed in front of it. The most important are the following characteristics:

• A type. Three main types of memory are distinguished: simple (very cheap, but without auto-discontinuity), automatic (turns off when the full charge battery is reached) and intelligent (mass additional features, We will look at them below).
• Compatibility. Each battery has such characteristics as the size (AA, AAA, 18650, Crohn, etc.) and an electrochemical system (Ni-CD, Ni-MH, Li-Ion and others). Therefore, to start, it is necessary to determine for which batteries you need, and then look for a device suitable for working with them.
• Number of connectors. Somewhere there will be enough 1-2 slots, and in other situations, simultaneous installation as much as possible is important.
• Tok Power. Weak current (0.1 a) is most safe and considered recommended, but the process full charge It takes a lot of time (14-16 hours). Accordingly, the strong current will reduce the time costs, but will reduce the overall life of the battery.

We have gathered for you the top 10 best chargers from Aliexpress. When choosing goods, the main emphasis was made on such indicators as:

• functionality and characteristics of the device;
• user reviews;
• value for money;
• seller reliability rating.

Top budget chargers with Aliexpress

3 Palo C824.

The lowest price tag for AA type batteries
The price of Aliexpress: from 122 rubles.
Rating (2019): 4.8

The most basic device of this type. Compatible with so-called finger and mismatch batteries AA and AAA (Ni-MH / Ni-CD). At the same time, no interesting features here, in principle, are not provided, not to mention the screen. And since the memory is automatically not turned off after the full battery charge (that is, up to the explosion), you must carefully closely follow the process (i.e., to manually calculate the approximately necessary time, based on the capacity of the battery and the standard Palo C824 capacity in 150-160 mAh) . On the device there is a LED indicator, but there is no particular sense from it - it testifies only about whether the battery is charging or not without any information about the progress of the process.

2 Jetting USB Battery Charger

Best price
The price of Aliexpress: from 69 rubles.
Rating (2019): 4.8

A simple device that includes only a compact plastic case (USB cable will have to get separately). Suitable for charging the Batteries of the Form Factor 18650 (the older model will also depict the batteries of the format 26650), and from the proposed functional there is only a light adhesion about the status of charging (the red light bulbs are replaced by green) and the automatic stop of operation when the total charge is reached (the established current limit - 1a) .

In general, with its task, Jetting is more than copes, among a large number of reviews there are practically no complaints about some problems with technical Space and efficiency. However, you should be prepared for the fact that delivery in the Russian Federation at the seller, though free, but very long.

1 Varicore 04U.

Favorable price for charger with 4 connectors
Price for Aliexpress: from 330 rubles.
Rating (2019): 4.9

Very budget, but at the same time a pretty universal gadget, which has 4 connectors at once under batteries. Despite the fact that the manufacturer recommended a device for recharging batteries by 3.7 V (models from 10440 to 18650), Varicore can charge and other types of batteries (AA and AAA), however, in this case, indicators will not let you know about the end of this operation, so We will have to follow everything yourself.

According to the manufacturer, in the apparatus there are as many six types of protection (from overload, overheating, short circuit, full discharge, etc.), but users do not recommend inserting more than 3 batteries at the same time. The speed of the process is entirely dependent on the power supply to which the USB cable is connected.

The best chargers for everyday use with Aliexpress

If at home there is not a lot of equipment that requires batteries for their work, or these devices are rare enough, then there is no particular sense to significantly overpay with a huge number of slots and a bunch additional features. In this case, simpler and compact models will be quite suitable.

4 Vontar Single Charger

Optimal choice for Li-Ion batteries
The price of Aliexpress: from 525 rubles.
Rating (2019): 4.8

Single Charger from Vontar is perfect for lithium-ion batteries at 3.7 V (size 26650, 18650, 18,500, etc.). The gadget is equipped with a small display, which shows information about the voltage, the charge percentage and the strength used (two options are available: 0.5 A and 1 A). After the battery inserted in the memory is fully charged, the device automatically stops this process, which allows to operate batteries with maximum efficiency. The external way out of the device is a Micro USB port, so it will additionally need a network adapter (you can take almost any Android phone at 5V / 1A). The disadvantage of Single Charger should be called only a narrow compatibility range for its price (as already mentioned above, it only works with an acb on 3.7 V).

3 Palo C905W

Intuitive interface
The price of Aliexpress: from 599 rubles.
Rating (2019): 4.8

Despite the fact that the C905W immediately has four free slots, the memory itself is very compact and simple (even one who first faces such equipment) easily. This model Compatible with AA and AAA batteries (Ni-MH / Ni-CD) and can automatically turn off when the full charge level is reached. The screen is also present, but it does not perform almost no functions, but simply serves as a certain indicator of progress (and the information is not given in percent, but in divisions it is not always convenient). From the pros, you can also note the direct work from the network (the adapters do not have to), and the main minus is the lack of opportunity to choose the desired current strength (by default it gives 1.2 A, which is sometimes too much). In addition, with simultaneous charging at once, 4 C905W batteries is heated, albeit slightly.

2 Liitokala Lii-100

Compact and convenient
Price for AlExpress: from 354 rubles.
Rating (2019): 4.9

Liitokala is one of the largest and famous companies In the market chargers for batteries. They offer wide choose Memory for every taste and wallet. For example, the LII-100 model under consideration at a low price has a number of advantages. Among them and good compatibility with almost all popular types of batteries (Li-ion, Ni-MH, Ni-CD), and a smart control system (automatically determines the type of inserted battery, it starts independently and finishes charging, and also detects faulty and discharged devices) , and the presence of a mini-display with indicators (displays current progress). Separately, it is necessary to note the presence USB output On the case, which allows the use of memory as a turn of the bank. Of course, one slot under the battery is unlikely enough for a long time, but, on the other hand, the charging of smartphones is still not the main function of LII-100. As in the case of the Vontar Single Charger, the network adapter is not included.

1 Liitokala Lii-202

The best ratio of price and quality
Price for Aliexpress: from 674 rubles.
Rating (2019): 5.0

Lii-202 is a two-cell model of Liitokala. According to the main parameters, this version is almost no different from LII-100, but there is nothing wrong with that, since there is already everything that is necessary for optimal exploitation: Wide compatibility with various batteries (from AAA to 18650), LED indicators of charge progress and the ability to switch the current strength. However, the LII-202 is much more convenient for use as a turn of the bank, since there are several connectors under the batteries. A significant plus is also the fact that the network adapter (5V / 1A) is included in the kit - nothing will further search for anything.

Best Professional Battery Chargers with Aliexpress

The term "professional" in the name of the category is quite conditional, we are talking about those situations where a person constantly deals (mainly for work) with a multitude of batteries and it needs a memory capable of simultaneously charge them in the right amount.

3 Palo P10

Favorable price for memory with 8 slots
The price of Aliexpress: from 491 rubles.
Rating (2019): 4.8

The undoubted advantage of this gadget is the number of connectors under the batteries - here are their integer 8. This should be enough even to the most demanding customers. Otherwise, the design is very simple - there are no serious functions and even a small display. From the stated features - smart control (automatic shutdown when achieving 100%) and LED indicators offering the user information about the current status of the memory. The relative disadvantages should include the multiplicity of the charging process (at the same time you need to insert 2.4.6 or 8 batteries, that is, an even number) and the impossibility independent choice Used current strength. Palo P10 is compatible only with AA or AAA devices (Ni-MH, Ni-CD).

2 Liitokala Lii-500

Wide set of functions
Price for Aliexpress: from 1214 rubles.
Rating (2019): 4.9

LII-500 - senior model from the ruler of the memory from the Liitokala brand. Accordingly, it is the richest among all his fellows. First of all, it is necessary to note the many available modes of operation: a standard, fast test (cycle charge-discharge with the subsequent measurement of the container), a complete test (similar procedure, but the time occupies more and the result is more accurate), determining the battery life. Instead of single indicators in this memory, a much more informative screen is set, and 4 types of current are available for charging. various power. Like other Liitokala gadgets, thanks to USB-exit LII-500, can be used as a turn of the bank, but considering the dimensions of the device, it will not be very convenient and appropriate. In addition to the external power supply, the kit also includes a cable for connecting to the cigarette lighter in the car and detailed instructions in English.

1 Opus BT-C3100

The most powerful
The price of aliexpress: from 2060 rubles.
Rating (2019): 5.0

Opus - main competitor Liitokala companies in the battery charger market. And the BT-C3100 is the most expensive and functional product in their ruler. In this regard, when discussing the advantages and capabilities of this model, all this occurs in the contest context with the flagship of the rival LII-500. Among these, you need to highlight more modes of operation (three previously mentioned plus "Battery"), a wide range of power (you can specify any current from 200 to 2000 mA), active system Cooling (fan). In addition, very many users in their feedbacks wrote that BT-C3100 is almost the only memory that is able to qualitatively restore the "killed" batteries.

About charger for different types batteries

A modern man surrounds a lot of different techniques that runs from batteries. This is a mobile phone, laptop, power tools, lantern, car, etc. All these things, at first glance, are not connected. But they all use the battery when operating. Before the owner of all these things, the question arises about the maintenance and periodic charging of all these batteries. In order to charge batteries, a charger is required. Only some of the listed devices have regular recharging opportunities. For example, a flashlight can have a plug for connecting to a 220 volt network, the battery in the car is recharged from the generator. But in most cases, a charger (memory) is required for a full charge. In this article we will talk about different types of charger and the requirements for them.

Different types of batteries are produced different chargers. Here are the main types of charger:

• To charge lead acid batteries;
• For alkaline batteries;
• Memory for lithium batteries;
• Universal chargers.

PS for lead-acid batteries

In most passenger and trucks Used precisely lead-acid batteries. In this case, the memory is used to complete the battery, while the car is in the garage or in the parking lot.

Today in stores are offered a lot of memory for car batteries. To choose the necessary one, you need to consider a number of the characteristics of the ACB used in your machine. What to pay attention to?

• Rechargeable battery type. The most common is WET (ordinary with liquid electrolyte), AGM (electrolyte impregnated fiberglass), GEL (electrolyte in gel condition). About charger for AGM and GEL will be tred below;
• Rated voltage of AKB. On the passenger cars Batteries 12 volts work. On some trucks and special equipment are installed batteries with a rating of 24 volts;
• Battery capacity. This parameter will also be required when selecting the characteristics of the memory. In most cases, the capacity is made by large font on the battery sticker. Unit of measurement ─.

For these parameters, the memory should be selected. There are three large groups of such devices: charging, start-up and commissioning. The latter are universal and allow you to charge the battery and start the engine. Among the launchers have a separate group - these are portable chargers. They are based on lithium or, and are designed to start the engine on the road, if the main battery panel.

As for commissioning devices, you need to decide whether you need, whether you need a motor startup function. If the car stands at the house or in the parking lot, you can still not be able to use such a memory, as you need to connect to the power grid. Then does it make sense to overpay for unnecessary functions?

It is also worth noting that the design charging devices differ in impulse and transformer. Transformer has large dimensions due to the presence of a transformer and rectifier in them. These memory are more often used in battery services. For household use, the pulse models are more often taken, which are built on the basis of the inverter. Such chargers are compact and do not occupy a lot of space.

Now, let's consider the basic parameters of the memory for a car battery, and what they affect.

Charging current. This characteristic is selected by the capacity of the battery. Patch the battery is recommended for a current of 0.1 * s. C ─ This is a nominal container. That is, 5.5 amps are considered to be 5.5 amperes for the battery capacity of 55 Ah. The charger should provide the ability to supply this current. Smaller values \u200b\u200bare allowed, but in this case the charging process will go longer. The modern can often find boost mode for accelerated charging. It should not exceed the full current strength of more than 30 percent. Specialists recommend applying such a mode only in case of extreme need.

It is best to choose a memory that gives the charging current a little higher than the nominal value for your battery. In this case, the device will not work the face of its capabilities. Ideally take the memory with manual adjustment charging Tok.. Such models are more expensive, but they are worth it. They can charge the battery with a small current at a fixed voltage. In this way, the battery is charged longer, but more fully and evenly.

And also should pay attention to the possible modes of operation of the memory. Above mentioned the presence of Boost mode. In some situations, he can come in handy. For example, when the battery sat down and should urgently go. Using this mode for 15─20 minutes, you can charge the battery to such a state that the car's motor can be launched. It is desirable that the memory has the possibility of charging in a fully automatic (included and forgotten) and manual (when constant toke or voltage) modes.

There are professional models of charging devices that can simultaneously charge several acb. But the usual owners of the car are hardly useful. Such "combines" use professional accumulator in services.

Charger for gel batteries

AGM and GEL batteries have some features of charging, and there is a separate group of memory for them. AGM batteries can now be found on cars with the start-stop system, and GEL is more used on motorcycle technology and water vehicles.

Let's look through what the characteristics of the charging gel batteriesAnd why they can not be charged with a standard memory.

• Heat. Gel battery can not be allowed to overheat. When AGM batteries This will lead to the discharge of fiberglass from the plates of the electrodes. That is, the memory must turn off the current immediately at the end of the charging. In addition, the battery overheating protection must be provided when charging;
• Stability of electrical parameters. The voltage must be stable in time. And if its value is changing, it should be smoothly without jumps. Charging current should also be stable. You can not allow it to be released for permissible borders. Gel batteries to this more sensitive than ordinary Wet.

Requirements for memory for gel batteries are shown below.

What are the requirements to satisfy the charger for gel batteries?

• Charging taking into account heating. The device must be with temperature compensation. That is, the charging conditions of the battery must be adjusted depending on the temperature of the OS and the battery itself. For example, if the battery was heated by 10 degrees, the voltage adjustment should be 0.3-0.4 volts to a decrease. In the perfect case, the charger should be able to take breaks when a certain threshold temperature is reached;
• The ability to adjust the current. Charging gel batteries, like WET, is led by a current of 0.1 * s. However, in this case, the excess of current leads to a significant reduction in the period of operation, and sometimes to failure;
• Charging must be stadium. Specialists advise to buy such devices that perform the charge of the gel battery in three stages. The first stage implies a charge with an increase in voltage. The second stage is constant pressure With gradually declining charging current. And in the third stage (compensating charge), the battery is charged with minimum values Current and voltage. The third stage is needed if the battery will be on storage. This allows you to compensate for self-discharge;
• Working temperature. This parameter is important not only for gel chargers, but also normal. The overwhelming majority of models operate in the temperature range of 5─40 C. That is, charge in the winter on the balcony or in the cold garage will not work. If it is possible, then buy charging with an extended operating temperature range.

Chargers for alkaline batteries

It will be discussed here for charging and battery elements that can often be found in and other portable tools. There are species of alkaline acb, which are used as traction on warehouse technology. But we will not consider the devices for their charging because of their narrow specialization. We will consider the requirements for the memory, which charge batteries from various techniques (AA, AAA and Others).

For charging alkaline batteries can be applied various methodsthat take into account the features of a particular type. That is, such a memory can be called universal within the group of alkaline batteries. You can select the following battery charging techniques:

• With constant charging current;
• When reduced charging current;
• Stepwise change of charge current;
• At constant voltage;
• Options that are combined by previous ones.

The user of batteries always strive to speed up their charging. Especially if they are used in some kind of production activities. The restriction in this acceleration are the requirements for charging from the manufacturers of the battery. These requirements are also tied up with battery guarantees.

It is also worth noting some things regarding specific charging modes. More often in stores are offered universal gland to have "brains" to charge different types of alkaline batteries. There, the user's performance is reduced to the choice of batteries and start charging process. More advanced allow you to install a current, voltage, charge duration. There are simple memory for one type of battery. In this case, remember the following rule ─ memory for NI─MH batteries are suitable for NI─CD, but not vice versa.

What are the requirements to satisfy the universal memory for alkaline batteries?

• If we are talking about universal memory, then they must be able to select a charging current for different batteries. Budget devices are usually deprived of such an opportunity. There the strength of the current is determined in the dependence of the type of battery;
• Planting places of the universal charger must take a different battery size. Or the design should provide any transformation for this;
• In addition, it is worth paying attention to what ways to control the end of the charging process are in the charger. This is especially important for nickel-metallicidride batteries. Best of all, if there are: control on the tension delta, temperature, as well as the speed of change of the latter. And there must also be control of the overall time of the process, which is required to complete the battery;
• The ability to recognize the battery installation in the memory;
• It is not bad to have the function of recognition of primary current sources. Simply put, ordinary AA and AAA batteries. This is useful if you confuse them with batteries.

Charger "Frog" - a widely known universal device intended to restore lithium batteries charge mobile phones and other small gadgets. With a different type of battery, this device cannot be applied.

The role in life

Sometimes there are times when there is no charging unit from a smartphone or mobile at hand, he irrevocably broke or was lost, and it is not possible to purchase it in the near future. In this case, a "frog" comes to change - alternative names - "Kospitage", "Zhabka". This device is equipped with adjustable contacts to which the battery itself is connected directly from the machine. Of course, a similar process involves some inconveniences associated with constant removal of the battery and the possible failure of the settings, but sometimes it is the only successful way out of the current situation.

Where and for what can it be used?

As mentioned above, this device is suitable for recharging most of the small equipment, mostly phones and cameras. Usually, the instruction is attached to the "Frog" device, but the problem may be in the content of the text of the brochure in a foreign language, since these devices are mostly chinese production.

A little useful information

In addition to cellular, the "Frog" charger is able to charge the camera, a pocket computer or navigator, but only subject to the use of lithium batteries with a small capacity. The device is included in the network with standard voltage. When charging the battery is fully completed, the device will automatically turn off from the network. As a rule, it takes about two or three hours.

There are several types of frog type devices that can join various sources of electricity:

• To an ordinary home outlet with a voltage of 220 volts.
• To the automotive network - 12 volts.
• Connecting to a PC via USB port - 5 volts.

The most practical and common is the "Frog" charger, feed from the home network. Selecting the type of device depends on the personal preference of each.

Decoding the designation of the device

Each such device has several indicators light bulbs, which are indicated by alphabetic notation, helping to adjust the entire process of recharging:

• Full, Ful - indicates full battery charge.
• Charge, CH means there is a charging process.
• POWER, PW - The device is connected to the source of energy.
• CON - Polarity is defined correctly.
• Te - There is a polarity check.

How the Frog Charger works

How to adjust polarity manually? To begin, it is necessary to push the battery in the charger so that the contacts of the instrument are attached to the terminals "-" and "+". If the battery has three or more contact, then you need to use two extremes.

If the polarity is properly defined when you are connected, the green light bulb with the inscription "CON" should turn around when you press the left button "those", otherwise, click the right button "CON", then again "those". On some devices, the "CON" LED can light up when connected without prior press.

The most convenient models that are automatically determined by polarity, respectively, there is no right polarity change button.

If everything is done correctly, the green light is burning, it means that you can turn on the device into the outlet. At this point should include "Power" and "Charge". When the battery charging process is over, the Right LED "Full" will begin. Now the device can be removed from the outlet and apply the intended battery.

Non-standard situations

If "CON" does not light up at all, it means that the battery is completely sitting, and he needs a "routing". In this case, it can be connected randomly in any polarity, after which it is included in the network for five minutes. If the "charge" flashes, it means that the charging is carried out correctly, if not, it means that you need to change the polarity with the right button and see how the charge pointer will behave in this case.

If I immediately start burning "Power" and "Full", then for more likelihood the battery in the "frog" is badly installed, it should be fastened to securely.

The duration of charging varies depending on the battery capacity, as a rule, it leaves from two to five hours:

• 1000 mA / h - 5 hours.
• 800 mA / h - 4 hours.
• 500 mA / h - 2.5 hours.

How to use the "Frog" charger?

The classic device is designed for 220-volt voltage, on the reverse side of its covers there are two sliding pins located in parallel to each other - they can be breeding to the required distance, corresponding to the distance between the battery contacts.

When you turn on, the polarity is adjusted manually through the buttons or automatically. It all depends on which model is your "Frog" charger.

If the battery is completely worn, the following situations may occur:

If you wish and some skill, the "Frog" charger can be built using a simple scheme.

Batteries with contact numbers More than two can be charged using the described device, however, it will be necessary to disassemble the battery and connect to it, bypassing the controller.

Following the outlined of everything, it can be understood that the "frog" is a universal charger, very useful in case of breakdowns of other power sources, small batteries, as well as the absence of the possibility of charging the laws in the usual way, which happens quite often. At the moment, manufacturers offer all new devices equipped with a USB port and LCD display, which greatly simplifies their use.

Advantages of the device:

• The presence of a USB port that allows you to charge most of the devices.
• Easy to use.
• Universality.

Disadvantages:

• With frequent use, relative briefness.
• Long process of charge of capacious batteries.

"Frog" - the optimal version of the spare energy source

Despite the few disadvantages, the "frog" is a charger, the price of which is very diverse (from 60 to 650 rubles), this is a fairly useful thing in the farm, if it would be able to literally revive non-signs of the life of the battery of phones and cameras . But it should be borne in mind that it is necessary to use this device as needed. Too frequent charging with the help of a "frog" can lead to rapidly exhaustion of the battery and, accordingly, it fails. Paradoxically, but it is.

Despite the fact that mostly these Chinese-made charging devices should not be neglected with similar products. In the modern market, you can find universal and unique auxiliary devices that can significantly facilitate our lives and give a second chance to detail, which in another case would certainly flee into the garbage. Therefore, it makes sense to have at least some idea of \u200b\u200bhow to use the "Frog" device for the usual recharging of the phone battery.

How to choose it and what you need to know?

When choosing a charger, first of all, you need to know the type of battery installed in the machine, because some of them require personal attention and approach.

For example, it applies to lead batteries - they require the use of special charges.

For most batteries, almost any universal devices are suitable.

Although modern devices allow you to simultaneously charge almost any battery using several output power and charging current values.

Features of charging for batteries

Deciding with a type of battery requiring charging, choice the best model continue to other characteristics.

It is desirable to give preference to compact portable models, to handle more convenient and easier.

A, choosing between the equipment operating from the cigarette lighter and from a single-phase network, you should pay attention to the second option - charging devices that are required standard 220V.

And, as a rule, we first provide half the capacity of the battery, gradually reducing power up to the final charge.

To protect the batteries from recharging, each device is completed with a special protection that automatically turns off it when the battery charged by 100%.

Among other parameters you want to consider when choosing charging, it should be noted:

• capacity batteries that need to charge. For passenger cars, it is equal, on average, from 40 to 62 Ah, for motorcycles - up to 20 Ah, for minibuses - up to 120-160 Ah;
• charging. 6 A Suitable for batteries with a capacity of up to 60-70 Ah. 12 and 18 A is the optimal option for minibuses and SUVs;
• price category. The cost of most models is at the level of 2000-3 thousand rubles. More functional equipment will cost 5 thousand or more.

The charger brand is also important. The most reliable and efficient devices are charging German production. While Korean models are distinguished by the price with sufficiently good characteristics.

See also:

Popular charging models

Virtually any modern charger copes with battery recovery passenger cars and small commercial vehicles for 6-10 hours.

These same devices allow you to return the performance of a fully discharged battery. At the same time, the recovery time of the battery capacity with a zero charge is calculated taking into account 10-15% of the stock.

For example, a device with a current 6 A charging the battery 60 Ah not for 10, and for 11-12 hours.

If the battery will be charged by a third (it is from now on that it is recommended to start charging) - respectively, for 7-8 hours.

Wanting to reduce this time, you should buy more powerful device. In this case, the choice of device with automatic floating parameters will increase battery life. Setting the smaller charging current value will increase the charge time, but also improve recovery. If there are no automatic adjustment functions for the charger, the user will have to follow the battery itself.

Bosch C3 - simple model for passenger cars

Car Charging Bosch C3, manufactured by the famous german concernIs the optimal option for most batteries - from acid-lead to gels.

It has 4 fully automated charging modes that give the ability to restore batteries various tanks (up to 140 Ah) with positive and negative temperature.

And high power ensures correct and fast charging.

And the security systems are able to warn the user about incorrectly attach the battery, preventing a short circuit.

Equipment characteristics:

• operating voltage: 220V (50 Hz);
• output voltage: 6B (for charge batteries with a capacity of up to 14 Ah) and 12V (up to 120 Ah);
• charging Current Power: 0.8 A and 3.8 A;
• type of charged batteries: gel (WET, AGM, GEL, VRLA) and lead acid;
• model cost: from 2300 rubles.

Fig. 1. Bosch C3 is compact and inexpensive, however, not too powerful device.

Bosch C7 - maximum functionality

Through the use of the Bosch C7 charger, you can restore the capacity car batteries of various types - from gel to acid-lead.

In this case, not 4 modes are used, as in the less functional model C7, and six:

1. For charge one ordinary battery with starting current 7a;
2. To increase the capacity of gel type batteries or any battery in winter time (Current 7 A);
3. Restoration of acb after complete discharge (current 1.5 A);
4. Maintaining the battery power in the process of its replacement;
5. Charging the batteries of light cargo transport;
6. Improving the capacity of truck batteries under negative temperatures.

Technical specifications:

• voltage: working - 220V, output - 12V and 24V;
• current power: 3,5A and 7 A;
• battery charging: up to 230 Ah;
• compatibility with AKB: gel and lead;
• cost: from 6500 rubles.

Fig. 2. Bosch C7 - universal device For any battery.

Tesla Zu-40080 - an inexpensive device for cargo batteries

Charging the Zu-40080 brand of Tesla has relatively large dimensions and ensures the restoration of lead-acid batteries of various equipment - from ordinary transport to boats, motorcycles, and even lawn mowers.

The capacity of the charged battery can be in the range of 20-180 Ah, and the charging current reaches 8 A, which allows the device to work with batteries, minibuses and trucks.

For ease of use, the device is equipped with protection systems from incorrect connection, overheating and short circuit, charging wires 1.4 and 1.7 meters long.

To accommodate on the wall at the device there are special attachments on shockproof and moisture-proof housing.

And the main advantages of the equipment include its minimum price among similar devices.

Main parameters:

• voltage value: input - 220-240V (50 Hz), output - 6 / 12V;
• charging current: 5.6 A (nominal) and 8 A (maximum);
• maximum capacity of charged batteries: 180 Ah;
• type of battery: lead acid;
• device price: from 1500 rubles.

Fig. 3. TESLA brand device - universal, powerful and affordable.

Deca SM 1270 - Compact and Universal

The small device of the Italian brand DECA will ensure the restoration of the batteries of the ordinary car for only 8-10 hours, depending on the tank.

And the ability to charge the battery to 225 Ah allows you to use the device also to work with freight transport.

The functionality expressed in the presence of three modes of operation, and the safety of charging is combined with universality (the possibility of charge the batteries of any type).

And the only minus you can only be called a high price, although it is quite consistent with the capabilities.

Characteristics of the model:

• operating voltage: 220-240V;
• parameters of connected equipment: 12V, 15-225 Ah;
• charging current: 7 A;
• batteries: AGM, lead and gel;
• cost: from 4500 rubles.

Fig. 4. Model SM 1270 is a small price and size in combination with high functionality.

Lavita La 192309 - Compact set for charging ordinary cars

Another charger, Lavita La 192309, is distinguished by a low price and is a whole set of equipment for restoring any lead-acid batteries.

By cons of the device, it is necessary to take the need to manually switch the charge power, weak charging current and the inability to work with the battery capacity of more than 80 Ah.

The advantages - shockproof, refractory and at the same time the light plastic case, a low price and full protection against all unforeseen situations - from incorrect connections, closures, overheating and recharging.

Instrument parameters:

• voltage: 220V;
• output voltage of the device: 6B and 12V;
• power charge: 3.52 A;
• battery characteristics: 12-80 Ah, lead-acid;
• price: from 1500 rubles.

Fig. 5. Convenient for use and transfer Lavita LA 192309.

See also:

Pulso BC-40100 - Account Charge Device on Clause

The battery charging device is the optimal option for use under conditions of low temperatures.

Made of high-quality metal and plastic Charger features an affordable cost, relatively small sizes, overheating, recharging, and incorrectly connecting batteries.

The high value of the charging current of 10 A and compatibility with the battery capacity of 20-200 ACC make it possible to charge the batteries of passenger cars, trucks, lawn mowers, SUVs and motorcycles.

Characteristics of Pulso BC-40100:

• voltage on the network: 220V;
• release voltage: 6 and 12V;
• charging current: 10 A;
• parameters of charged batteries: lead-acid, Capacity 20-200 Ah;
• the cost of the charger: from 2300 rubles.

Fig. 6. Pulso BC-40100 - a good option for charging any ACB at any temperature.

Aida 8 Super - Light Universal Device

The automatic AIDA 8 charger is suitable for restoring the capacity and performance of any type of batteries installed on freight and passenger cars, motorcycles and buses.

The device charges the batteries in 3 modes (including the storage of the ACB in the inter-space) and works even with the equipment discharged to zero.

This ensures full protection against recharging and overheating. The model weighs no more than 600 grams and is placed in a small carrying bag.

AIDA parameters - 8:

• voltage on the network: 150-240V (50 Hz);
• charge current: 4 and 8 A;
• power supply: up to 13V;
• accumulators: 40-160 A / h, AGM, lead, gel;
• prices: from 2 thousand rubles.

Fig. 7. Aida 8 super - a combination of small size and serious opportunities.

Aida 10S - Charging and storage of powerful acb

Using the charger of the AIDAM-10S model, you can restore accumulators of any vehicles, regardless of the level of their charge and ambient temperature.

To start the batteries, use a special premium with a current of 10 amps.

The device also applies to storing the ACB when they are not used, which allows them to save them for a certain period.

The advantages of the model are at a low price and small size, protection against incorrect connection and the ability to be used as a power supply.

Charger Parameters:

• allowable network voltage: 150-240V;
• chargers: 1, 5 and 10 A;
• output voltage: 12V;
• type of battery: gel, lead, AGM, 4-180 Ah;
• cost: from 2300 rubles.

Fig. 8. AIDA 10C - the optimal option for storing passenger and cargo engines.

Aida 11 - average price and decent parameters

Charging Aida 11 works in manual and automatic modeAnd also allows desulfatition - restoring the performance of batteries.

The model can be used to charge batteries with a capacity of up to 180 Ah, that is, devices installed and on ordinary cars, and on SUVs, buses and trucks.

The equipment has 4 degrees of protection, middle Cost And small dimensions.

And among its advantages you can name the great value of the charging current, thanks to which even completely discharged automotive AKB By 60 ACH charges in just 7 hours.

Main parameters:

• valid voltage: output - from 160V to 240V, output - 12V;
• frequency on the network: 50-60 Hz;
• charging current - from 0 to 10 A;
• type of charged batteries: lead, gel and agm;
• the cost of the device: from 2500 rubles.

Fig. 9. Domestic model with good parameters.

Simple and convenient charging AUTO WELLE AW05-1208

Charging the AUTO WELLE brand, as well as all other models in the review, has full protection against any errors and troubleshooting.

And additional advantage is also moisture protection IP 65.

The automation of the device is ensured by the built-in processor, and the versatility - the presence of several modes of operation and the ability to charge the acb of any type with a capacity of up to 160 Ah.

Features Charging:

• charging Current Power: 2 and 8 A;
• charged batteries: lead-acid, AGM and gel, 4-160 A / h;
• voltage: 220V, output - 6V and 12V;
• price: from 2 thousand rubles.

Fig. 10. Model AW05-1208 - a convenient interface and a small size.