If the car door slammed and the keys were inside. How to open the car if the keys are left inside? How to make a knot, a loop and open a car lock with a rope

Quite a typical situation: the driver got out of the car for a minute, but then the car closed, the keys were inside. What to do in this case worries not only those who find themselves in such a disadvantage, but also those who would like to avoid it.

The car is locked, the keys are inside: how to open?

The algorithm of actions in the case when the car door accidentally slammed shut is as follows:

Find a duplicate key, which is included in the mandatory delivery set of every car sold in the salon. You just need to go home or ask a relative or friend to bring it.
You can try to lower the glass on one of the side doors in order to reach the door handle with the help of improvised devices. Not all car models allow you to do this.
Using a flat screwdriver, try to bend the edge of the door next to the seal.
Some cars have glass back door divided into two sections: large and small (back). If you manage to pull out the rubber bezel that surrounds the glass, then it will fall right into your hands. The size of the "window" is quite large for an adult to open the door from the inside with his hand.
If all else fails, and every minute is precious, then the only way out is to break the glass. After that, you should immediately go to the technical service, where for several thousand rubles you can replace it with a new one.

What to do if keys are lost?

If the entire set of car keys was stolen or lost, then there can be two ways out of the situation:

Make a request to official dealer ... In the database, he will definitely have the personal data of all customers who have made purchases of cars. As a result, you can get your hands on a duplicate of the original key, which will look like two drops of water. If you have a special barcode from the second pair of keys on hand, the process can be accelerated many times. However, in the absence of a barcode, the dealer can set a price tag of up to fifty thousand rubles for replacing the locks on the doors. For those who do not want to pay such an amount, it makes sense to contact third-party firms.
There are many companies that claim to be able to duplicate keysif owner iron horse even lost a spare. According to such firms, this does not require removing the old lock (although, at the request of the client, there may be such an option). The whole process takes about a day. The car is first opened with the permission of the owner, and then distilled to a technical center.

Emergency opening of locks: where to call?

Today it will not be difficult to find a company on the Internet that would open, at the request of an absent-minded owner, not only a car, but also a safe, an apartment door, etc. The cost of such services usually does not exceed a couple of thousand rubles, and the time of arrival of a specialist is within half an hour.

Therefore, many motorists choose this particular path, since opening a car on their own can turn into an extremely expensive repair.

To find a company in your city offering this service, follow the link.

However, you need to keep in mind all the pitfalls of such a solution:

Many car owners fear that their car could be stolen by the same specialists, but in a different situation.
Before starting work, the specialist will require documents confirming the ownership of the vehicle.
The presence of police officers at the procedure is mandatory. They can be called either by the owner himself or by a visiting "burglar".
Typically, the lock is opened in a few moments using a code scanning device car alarm... However, often complications may arise during the autopsy, and repairs may be required, which the "burglars" themselves will immediately offer. Obviously, this is an endless field for fraud, so you need to be extremely careful.

How not to leave the keys inside a closed car?

In order not to get into such a very delicate situation, it is enough to adhere to a number of rules:

Safely store the second set of keys and the accompanying barcode.
Apply for the manufacture of a flip key for a car. It is he who can come to the rescue when the original key is lost. Foldable key rings do not tear pants and do not pull off pockets, which allows you to carry them with you at all times.
Timely pass maintenance and monitor the condition of the vehicle. At the first signs of a jammed lock or the presence of external attributes of wear, you should immediately contact specialized technical services.
If financial and hardware capabilities permit, you can install a special emergency software package that can play a good role in an emergency.

Opening with software

Anyone who has watched the film " Toughie 4 ", witnessed a very unusual scene when main character starts a BMW without a key, simply by calling the dispatcher who served this car.

Americans know this software package as "OnStar" and it consists of three links:

A computer built into the car with access to the mobile Internet (most often using LTE technology);
Cloud service;
Special softwarethat connects the machine and the server.

“OnStar” works even in Russia, if you bring an “American” here. The system is far from free: every month you need to unfasten a certain (in each country - its own) amount for it.

Among the advantages of the system:

The module works even in the background when the ignition is turned off;
The control buttons are located on the rear-view mirror, which allows using the services even with the doors locked;
Access to functions through a mobile application;
Remotely you can start the car, open or lock doors, etc.

Something similar was announced by Avtovaz in 2016. The company has created a car project with an advanced ERA-GLONASS system.

The situation is very unpleasant, especially in winter, when the car is closed, the keys are inside. What to do? You can try to lower the window, even break it, or call specialists who will break into the car without unnecessary trouble. But it is better to have a spare set of keys - this way you can save not only money, but also nerves.

Video tutorial: open the car with the keys inside

In this video, car mechanic Arkady Ilyin will show how you can open the interior of a VAZ car using a regular rope:

Two everyday situations: you lost your car keys or the door closed automatically security system alarm, and the key fob with the bundle remained in the ignition lock. There are 2 standard solutions to the problem: find or bring a spare kit, or contact the car opening service. These methods are not always applicable, for example, in long trip and away from big cities. Then try to get into the locked car using the available means described below.

Door opening methods

The interior of the car is locked by locking the door mechanisms with the central lock, and in older cars - by manual buttons located on top of the door panels. Therefore, your task is not to break open the locks themselves, but to unblock them, after which the door will open with an external handle. There are several options for how you can open the car without a key:

using a rope loop;
steel wire crochet;
a thin metal ruler;
card keyless entry (for modern cars).

First, understand two important points... Firstly, none of the listed methods is a panacea and will not give a 100% guarantee of the result. In the most extreme case, when all the means have been tried, be prepared to use the only possible brutal method that works on any car - to knock out the side window.

Secondly, it must be borne in mind that when you try to unlock the door locks, an audible alarm may sound at any time. This usually occurs as a result of unlocking doors that were closed by an automatic security system while the keys were left inside. So get ready to perform part of the operation while the siren howls, and there will be no way back - the doors will have to be opened in any way.

The essence of the method consists in gripping the head of the locking button with a loop made of thin rope. It will be possible to perform a similar operation only on cars where the button has a slightly embossed shape, since it is almost impossible to grip and lift a round plastic rod with a loop - the rope will slide off.

To open the car door without a key in this way, find a thin strong rope or fishing line and tie a sliding loop at the end. Then proceed like this:

The rope grip must be inserted into the passenger compartment through the gap between the door and the body. To do this, carefully bend the upper right corner of the door using a strictly wooden spatula.
Lower the eyelet through the slot and slide it over the lock button.
Pull the line slightly to the side so that the loop firmly wraps around the shaft.
Use light jerks to check that the grip is secure, then try raising the button. If unsuccessful, try again by tightening the loop more firmly.

Council. In order not to spoil paintwork body parts in the process of bending the door, cover them with masking tape and be sure to place a rag under the wooden lever.

Before opening the machine, it is recommended to carefully inspect the front doors. It may be easier to fold the corner on the passenger side. The slightly open glass will greatly facilitate the task, then you will not have to touch the door. In some models of domestic cars rear windows fall spontaneously, from vibration during driving.

Autopsy with wire

This option is suitable in a situation where the design of the locking buttons does not allow the rope loop to grip. For implementation, you will need to find a steel wire with a thickness of about 2 mm. It should be stiff enough and not unbend with the slightest effort (soft knitting wire will not work).

The algorithm of actions is as follows:

Use the pliers to bend the end of the wire to create a hook.
Using a screwdriver, remove the part of the window seal opposite the locking button.
Insert an impromptu master key into the resulting gap.
Rotate it 90 ° around its own axis so that the end of the hook is inside the door cavity.
Pull up gently trying to engage the button rod and unlock it.

Note. You will probably need more than one attempt before you can capture the thrust. If the hook does not catch on, pull out the tool and bend it so that the end is longer.

Not all machines have a door design that allows you to remove the window seal and insert the wire. Then you should try the option with bending the top corner of the door and grabbing the button with a wire hook.

When the keys inside the car stick out in the ignition switch and the window is slightly open on the passenger side, the problem is relatively easy to solve. Take a thick metal wire (about 3 mm) of the required length, make a hook and push it through the slightly open glass to the ignition switch. Hooking the keys into the ring and pulling them out of the lock is a matter of technique.

Iron ruler option

This is a favorite way of car thieves of the Soviet era, tested on all "classic" models VAZ 2101-07 and others domestic cars... The method can also be useful for opening foreign-made cars manufactured before 2000. You will need a long iron ruler applied as follows:

Bend part of the rubber window seal away from the locking button.
Insert a ruler under the seal and push it inside the door.
To open the car door without a key, act as a lever with a fulcrum on the sealing rubber. The task is to pick up and push the rod together with the button from below.

Note. The main condition for success is to push the pseudo-latch 10-15 cm away from the rod, and not opposite the button. Then you can use the ruler as a lever.

In more modern cars, the locking mechanism is hidden in the thickness of the door or protected by a metal wall. This design does not allow the use of the simplest master keys.

Keyless entry with discharged battery

With new machines equipped with electronic anti-theft systems, also sometimes incidents occur. For example, you have parked and locked the car with a keyless entry card, and after returning you cannot open the doors due to a dead battery... For the same reason, the car cannot be locked while being anywhere in the city.

In fact, the designers envisage a situation when the door slammed in the car with a "dead" battery. The operating instructions always say what to do in such cases:

There is a short key inside a plastic card or key fob that provides access to the car interior. It must be removed by unlocking the plastic catch and opening the cover.
With the help of this key, the decorative strip on the door handle is removed, under which the keyhole is hidden. Insert the mini-key from the card there and open the door.
If the car needs to be locked, then the driver's door is closed according to the reverse algorithm. Find the nests for this key in the passenger ones, turn the "larvae" half a turn and simply slam the door from the outside.

When the battery in the card itself runs out, you should use the general lock button located in the car's interior. Press on it, leaving the driver's side open, and after the central locking is activated, leave the car and close the door. In this case, do not forget to buy and put a new power supply in the keychain.

Friends, today we will talk about how to open the car yourself if you forgot your keys inside the cabin. Imagine the following situation: you got into a car, started the engine - and suddenly you were "bite" to check the tire pressure or the state of the headlights. They went out, the door was slammed shut as usual ... And they realized that you are a fine fellow. The keys were left waiting for you inside.

How can you open the car if you don't have spare keys? For efficiency, you can use a proven high-tech tool, whose name is a sledgehammer.

But Steer will suggest better ways for you. We read and calm the nerves.

Method number 1. You will need:

1.5 m steel wire or strong thin rope,

Rubber insulating tape

Wooden kitchen spatula

What you need to do: Your task is to stretch the wire with inside car door and put a loop at the end of the wire over the door lock rod. In order not to scratch the rack and the door in those places where you will be working with wire, it is better to glue these places with electrical tape. If the door has slammed shut tightly, you will need to squeeze it a little to get the wire through - that's what a kitchen spatula is for. It will not damage the coating of the body, and you can squeeze the car door a little without damage.

1. We tie a tightening loop on the wire so that one end of the wire to the loop is long, and the other, on the other side of the loop, is short, 15 centimeters.

2. We throw the long end onto the previously wrung out car door. Gently pull the loop inward, trying to throw it over the lock rod. There is.

3. Pull the wire up at both ends.

4. PROFIT! The door is open.

Method number 2.You will need: a tennis ball with a small round hole (0.5 cm in diameter, approximately) dug into it.

What are we doing?

1. Tightly place the ball with the hole on the car door lock.

2. Squeeze the ball sharply so that the air enters the lock (don't worry, if it doesn't work the first time - try it!).

3. Voila! You can get your keys out of the car.

In addition to the aforementioned methods, on the Internet, you can find a bike about how to open a car using a cell phone. Like, if you call someone with a spare key, he will be able to transmit a signal from the key through his mobile phone to the car lock. This is just a myth. Car keys use an IR signal to close the door. This signal cannot be transmitted otherwise than directly - with a short distance of the key from the IR application in the door handle.

So that leaves you with a wire, a ball and patience. And in the future - careful attention to where your keys are. Good luck on the road.

Forgot your keys in your car and it locked? What to do in this case? How to get out of this situation with minimal losses and is it possible at all? Of course you can, for this you need the simplest improvised devices that we will make with our own hands, a little time and perseverance.

There are several methods for opening a locked car without keys, here we will take a closer look at one of them. We will just remind about others.

The described method works well only on old ones, or simple cars, with mechanical locks, no electronic keys or complicated expensive alarms.

1. Find an ordinary clothes hanger made of wire, straighten it so that you have a straight wire. A knitting needle from an umbrella, a bicycle, etc. will also work.

2. Using a wire cutter, cut the hanger and straighten it into a rod. The longer the rod is, the better.

3. Make the bar as straight as possible. It is extremely important that it is even, as you will have to push it inside the car.

4. Make a small hook if you will be trying to open the door directly from the inner door handle, or a hinge if you need to open the door behind the door lock button. Make sure that the hook is large enough to grip the door opening handle, on the contrary, the eyelet should fit the opening button as tightly as possible, when you pull it should catch on it.

5. Carefully open the door slightly at the point where it adjoins the body. To do this, you can use a special inflated wedge that will allow you to safely open a door or window in the car.

But since it will not be at hand in 99.9% of cases, take some thin, rigid, rubberized device that you insert between the door and the car body. Rubber is needed in order not to scratch the paint. All you need is a small gap into which you will then push the prepared wire.

Almost all of them are more or less expensive: break a glass or a window, call a car opener (there are such services in large cities of Russia), call a tow truck and take the car to a service station, climb through the hatch, having previously opened / broken it. You can also go for a second key, which is at home (depending on how far you are from home and where the keys are in the car, if in a conspicuous place, it is better not to leave the car).

But in any case, it is better to spend a little more time than meekly giving your car and money to other hands.

Every car owner can get into a situation when the car doors are locked, and the keys are left in the passenger compartment. If there is no spare key, open the car without special tools difficult. Don't worry, there are methods that can help solve the problem.

This article describes five proven methods. They work in most cases. After reading the article, you will learn how to open the door yourself using tools made from scrap materials. It also provides tips to help you overcome the problem without hacking.

We open the door with improvised means

Cars different brands have differences in door design. Therefore, not all described opening methods may be suitable for a specific machine. Also keep in mind that trying to unlock it yourself may damage the body and glass. Try to do the job neatly or call a specialist.

The first way
Many foreign-made cars have modern system security. It works as follows: if the door is blocked, it can be opened from inside the cabin. To do this, pull the handle twice. The first pull will unlock the door and the second will open it. On domestic cars, it is enough to pull the handle once. Knowing about these features, it will be possible to open the door.

This method is based on the use of soft wire. It is necessary to make a simple tool out of it. To do this, find a piece of wire one and a half meters long. Bend the end with a crochet hook that will catch on the inner handle that opens the door.

After making the fixture, think about how to increase the gap between the upper door rib and the body. Usually, a thin plank, flat screwdriver or chisel is used for this. Most importantly, wrap the tool with tape or cloth, this will prevent scratches on the paint.

Bend the door carefully, being careful not to spoil the geometry. Make a small slit in the upper corner and slide your DIY tool into it. Bend the wire under the right angle... Clinging to the handle, it will be possible to unlock and open the door.

Second way
If the door has slammed, but the engine is running or the ignition is on, it will be easy to open the door. All you need to do is get to the power window button. It is worth warning right away that this method will not work if the engine is turned off.

You need to prepare a piece of fairly stiff wire, a couple of wooden wedges, and a chisel. To avoid scratching the paint, wrap the fixtures with a cloth or tape the places on the body with which the tool will come into contact with tape.

Make a small gap in the upper corner between the body and the door. Put the wire through it and get on the power window button. After lowering the glass, get access to the door opening handle.

Third way
This method will help to open not all doors, but only those that have a lock button protruding above the surface. To do this, you need to make a simple device. With the help of it, it will turn out to catch on to the button.

Find a thin rope or fishing line of sufficient length and make a loop in the middle. Its size should be slightly larger than the thickness of the button. Slide the manufactured device into the narrow slot in the driver's door.

You need to put a loop on the blocking button. Once you managed to get in, tighten the rope. Then hold the right end of the thread taut and the left (on the side side mirror) pull up. As a result, the button rises and unlocks the lock.

In some cars, the doors are pressed tightly, so you have to bend the top corner a little to get the rope through. You can use available tools, such as thin bars. Wrap a cloth over the boards to avoid damaging the paintwork. Don't bend the door - you just need a small gap. Try to do everything neatly.

Fourth way
Most domestic cars have simple construction door lock interlock. Opening such a car will not be difficult even for an inexperienced car owner. The method consists in using a regular wire hook.

First, craft this simple tool. Find a piece of stiff wire 40-50 cm long. Bend the tip at a 45-degree angle to form a hook.

Pry up the sealing gum carefully front glasswhere the doorknob is. To do this, you can use a nail file, a small flathead screwdriver, or a bicycle spoke. Pull out the seal, but not completely - 10 cm of free space is enough.

Insert the hook into the gap formed between the glass and the door and try to find the blocking rod. Once engaged, pull the tool up and the lock will unlock.

Fifth way
This method is one of the forced ones (if other methods did not help or it is extremely urgent to get into the car and go). It consists in breaking the window of the door. Not every driver wants to use this method, because they have to buy new glass, which is expensive. But as the only, salvage option can be applied.

Prepare the glass. To do this, glue the window surface with masking tape. Thus, small fragments will not be scattered around the cabin on impact.

Take security measures. Protect your arm by wrapping a piece of cloth or jacket around it. Before hitting, turn your head in the opposite direction so that the debris does not accidentally hit your face.

Use a durable item. The car door window is made of tempered glass, so do not try to break it with your bare hands like in a movie - this will cause injury. Use any solid object: stone, iron or hammer. The blow must be applied to the center of the window with a sharp movement.

How to solve the problem without resorting to hacking

Take care of making a copy of the key in advance (without the immobilizer chip). Carry it with you in your wallet or with your house keys. If the next time the doors are locked, you will be able to open the car.
Make an accurate drawing of the key on paper showing the thickness and groove details. If you lose a spare key, you can restore it by making a new one. You can either make it yourself (from a piece of metal just to open the door), or contact a specialist.
In frosty or wet weather, disable the automatic locking. Electronics can malfunction at the most inopportune moment, causing a lot of problems.
Leaving the car without keys, open the window in advance. If the arming system is triggered and the vehicle is locked, you can open the driver's door hand.

Many car owners face similar problems. In most cases, the reason is banal carelessness and forgetfulness. Fortunately, for these drivers there are different ways get inside the cabin. But not all methods work, especially on modern foreign cars. Therefore, prevention is better and cheaper than burglary. Be careful to prepare a spare key in advance.