What oil should be poured into Nissan Almer. Nissan engine oil: review, characteristics and reviews

Properly selected oil can significantly increase the engine resource, regardless of which climatic conditions have to operate the car.

We select oil into the engine Nissan

The most important characteristics of automotive oil, directly affecting the engine and wear piston groupare:

Viscosity - oil that is optimally balanced by viscosity, easily penetrates all the vehicles of the car engine, retains its beneficial properties on the entire temperature range, ranging from cold start on strong frost and ending with long intensive use on high revolutions;

Anti-wear properties - Sophisticated climatic conditions The operation of the Nissan car requires an increased ability of motor oil to withstand undesirable phenomena that destroys the metal surfaces of the nodes and parts of the engine. Oil must contain additives that prevent accelerated wear in extreme operating conditions;

Cleansing properties - The oil must have elevated detergents, dispersing and cleansing properties to prevent the engine clogging by combustion and various sediments.

Nissan gasoline engine oil - right choice

Since the cars of the brand Nissan are produced in Japan, and in Europe, the oil for them has a number of differences. For cars produced in Japan, it is recommended to use the following varieties of engine oils:

The greatest popularity of the owners of Nissan cars received engine oil with a viscosity of 5W-40. Synthetic nissan oil Motor Oil 5W-40, which has excellent antioxidant, detergent and dispersing properties, has greatly proven itself when working in difficult operating conditions and during long trips.

Nissan oil for diesel engine - the best choice

Recommended for use in diesel engines the following automotive oil varieties, which relate to the class of mineral all-season:

Nissan Diesel Oil Turbo x CF-4 / DH-1, having a viscosity of 10W30 - oil for turbocharged Nissan engines.
Nissan Diesel Oil CD EXTRA SAME X with a viscosity of 10W30 and 5W30 - engine oils for Nissan engines;

For those diesel engines Nissan, on which filters capturing solid and fine particles are recommended for use oil motor Nissan. 10W30 and 10W40, characterized by a reduced level of phosphorus, sulfur and ash content. Nissan oil having a viscosity of 5W30 should be poured into cars, the operation of which runs in regions with a temperate or cold climate.

Original and non-original oils for Nissan engines

Each Nissan car owner should always remember that the development of Nissan oils occurs in parallel with the creation car engines. Thanks to such cooperation and interaction, the maximum matching of engine oil is achieved to all the features of Nissan engines.

The main characteristics and features of the original engine oils of the brand Nissan:

Original oil allows you to reduce the wear of parts and friction when the engine is started into a strong cold, as it always has a balanced viscosity;
They make the most effectively lubricate the parts of the engine at high temperatures;
Increase the motor and guarantee the engine more long term operation;
Motor oils I. technical fluids Nissan have operating properties, significantly exceeding the requirements of international standards, which makes it possible to recommend them for use in other brands of cars.

Replacing the "native" engine oil Nissan to similar varieties of other manufacturers can significantly reduce the engine resource, cause its premature wear and ahead of time to demand overhaul Piston group. Service centers warn - more than half of all the breakdowns of Nissan engines are caused by the use of low-quality car oils Or its late replacement.

We offer to implement in a hundred carfraud.

The chemical composition of lubricants is optional to study before planned change of car. It is enough to familiarize yourself with Manul to the car. In this documentation, the manufacturer describes the parameters of the recommended engine oil for Nissan Almera..

Nissan Almera Classic B10 2006-2012 release

If we consider the instruction manual for the Nissan Almer, then the manufacturer of the car is recommended to use lubricating mixtures that meet the requirements:

original automal company Nissan;
in accordance with the API classification, the type of oil SH, SJ or SL;
according to the ILSAC standard - GF-3;
the viscosity of the lubricant is selected according to Scheme 1;
the approximate volume of the mixture for replacement with regard to the oil filter is 2.7 liters (without filter - 2.5 liters).

The approximate volume of the car is calculated on the basis of a fusion lubricant, excluding the engine mixture remaining after the drain in the motor.

According to the Regulations, you need to use motor mixtures:

if the temperature is from -30 ° C (and less) to +30 ° C (and higher), pour 5w - 20,
at temperature conditions from -30 ° C to +30 ° C (and higher), 5W - 30 are poured;
if the thermometer shows from -20 ° C (and less) to +30 ° C (and higher), pour 10w - 30; 10w - 40 (7.5W - 30);
in the temperature range from -10 ° C to +30 ° C (or more) use 20W - 40;
for temperature mode from -10 ° C to +25 ° C poured 20w - 20;
from 0 ° C to +30 ° C (or more) Apply SAE 30.

QG 15DE 1.5 L and QG 16DE 1.5 L and QG 16DE - operate on gasoline.

Nissan Almera N16 2000 - 2006 release

nissan's original lubricants;
according to aPI classification - type of oil SH, SJ or SG (prohibited Application API - CG-4);
according to the ILSAC standard GF-I, GF-II, GF-III;
quality class for ACEA - 96-A2;
the viscosity of the lubricant is selected according to Scheme 2;
the approximate volume of the engine mixture for replacement with regard to the oil filter is 2.7 liters (without filter - 2.5 liters).

Gasoline power units - QG15DE 1.5 L and QG18DE 1.8 l.

at temperature conditions from -30 ° C (or less) to -10 ° C, pour 5w - 20 (this oil is not recommended to use if the machine is often exploited at high speeds);
at temperature mode from -30 ° C (and less) to +15 ° C, 5W - 30 are poured (automation helps reduce consumption fuel mixes car);
in the temperature range from -20 ° C to +15 ° C, pour SAE 10W;
if the thermometer shows from -20 ° C to +40 ° C (or more), use 10W - 30; 10w - 40; 10w - 50; 15w - 40; 15w - 50;
if the thermometer shows from -10 ° C to +40 ° C (or more), use 20w - 20; 20w - 40; 20w - 50.

It is better to apply 5W-30 lubricant.

Nissan Almera G15 since 2012

According to the manual, it is necessary to use lubricants that meet the requirements:

branded engine fluids Nissan;
quality class by ACEA - A1, A3 or A5
according to the classification of API -SL or SM;
the viscous parameters of motor fluids are selected according to Scheme 3;

The approximate volume of the car for replacement is 4.8 liters (including oil filter) and 4.7 liters (excluding the filtering device).

According to the regulations, it is necessary to pour motor fluids:

in the temperature range from -30 ° C to +40 ° C (and above), 0W-30, 0W-40 is poured;
if the thermometer shows from -25 ° C to +40 ° C (or more) apply 5W-30, 5W-40;
with the thermometer indicators from -25 ° C to +40 ° C pour 10W-40.

Preferably, apply 5W-30 oil.

Conclusion

Recommended motor oil for Nissan Almera can fill the gaps in friction pairs of a certain type of engine to protect the motor from abrasion and overheating. Pouring a more thick or liquid car worsen performance features power aggregatewill lead to his breakdown.

Manufacturers lubricants Use various bases of lubricants (synthetics, semi-synthetic, mineral water), dominated different chemical additives. The fact that the machine is a specific brand is suitable for a specific machine model, can testify to the canister tolerances. At the same time, the mixtures for the summer, buy more viscous than for the winter.

Check out an interesting video on this topic:

Nissan Almera Classic B10 2006-2012 release

QG 15DE 1.5 L and QG 16DE 1.5 (6 L and QG 16DE 1.6, operating on gasoline.

If you consider the instruction manual for the Nissan Almer, then the manufacturer of the car is recommended to use lubricating fluidsCommitable:

original automal company Nissan;
in accordance with the API classification, the type of oil SH, SJ or SL;
according to the ILSAC standard - GF-3;
the viscosity of the lubricant is selected according to Scheme 1;
the approximate volume of oil for replacement with regard to the oil filter is 2.7 liters (no filter - 2.5 liters).

The approximate volume of the car is calculated on the basis of a fusion lubricant, excluding the lubricant remaining after the drain in the motor.

Scheme 1. The dependence of the viscosity parameters of the car from temperature ambient.

According to Scheme 1, you need to use motor lubricants:

if the temperature is from -30 ° C (and less) to +30 ° C (and higher), pour 5w - 20,
at temperature conditions from -30 ° C to +30 ° C (and higher), 5W - 30 are poured;
if the thermometer shows from -20 ° C (and less) to +30 ° C (and higher), pour 10w - 30; 10w - 40 (7.5W - 30);
in the temperature range from -10 ° C to +30 ° C (or more) use 20W - 40;
at temperature mode from -10 ° C to +25 ° C poured 20w - 20;
from 0 ° C to +30 ° C (or more) Apply SAE 30.

Nissan Almera N16 2000 - 2006 release

Gasoline power units QG15DE 1.5 L and QG18DE 1.8 l.

nissan's original lubricants;
according to the API classification - the type of oil SH, SJ or SG (prohibited the use of API - CG-4);
according to the ILSAC standard GF-I, GF-II, GF-III;
quality class for ACEA - 96-A2;
the viscosity of the lubricant is selected according to Scheme 2;
the approximate volume of engine oil for replacement with regard to the oil filter is 2.7 liters (without filter - 2.5 liters).

Scheme 2. Selection of the viscosity of the engine fluid depending on the temperature beyond the car.

According to the Scheme 2, the manufacturer is recommended to pour:

at temperature conditions from -30 ° C (or less) to -10 ° C, pour 5w - 20 (this oil is not recommended to use if the machine is often exploited at high speeds);
at temperature mode from -30 ° C (and less) to +15 ° C, 5W - 30 poured (the car helps to reduce the fuel mixture consumption by car);
in the temperature range from -20 ° C to +15 ° C, pour SAE 10W;
if the thermometer shows from -20 ° C to +40 ° C (or more), use 10W - 30; 10w - 40; 10w - 50; 15w - 40; 15w - 50;
if the thermometer shows from -10 ° C to +40 ° C (or more), use 20w - 20; 20w - 40; 20w - 50.

It is better to apply 5W - 30 lubricant.

Nissan Almera G15 since 2012

According to the manual, it is necessary to use lubricants that meet the requirements:

branded engine fluids Nissan;
quality class by ACEA - A1, A3 or A5
according to the classification of API -SL or SM;
the viscous parameters of motor fluids are selected according to Scheme 3;
the approximate volume of the car for replacement is 4.8 liters (including oil filter) and 4.7 liters (excluding the filtering device).

Scheme 3. Selection of viscosity in the temperature of the region in which the car is operated.

According to Scheme 3, it is necessary to pour motor fluids:

in the temperature range from -30 ° C to +40 ° C (and higher), 0W - 30, 0W - 40 are poured;
if the thermometer shows from -25 ° C to +40 ° C (or more) Apply 5W - 30, 5W - 40;
with the thermometer indicators from -25 ° C to +40 ° С pour 10w - 40.

It is preferable to apply oil 5W - 30.

Conclusion

Recommended motor oil for Nissan Almera can fill the gaps in friction pairs of a certain type of engine to protect the motor from abrasion and overheating. The fill of a more dense or liquid car will worsen the performance characteristics of the power unit, will result in its breakdown.

Manufacturers of lubricants use various bases of lubricants (synthetics, semi-synthetic, mineral water), dominated different chemical additives. The fact that the machine is a specific brand is suitable for a specific machine model, can testify to the canister tolerances. At the same time, the car for the summer, they buy more viscous than for the winter.

Often car enthusiasts ignore the information set out in the manual to the car, violate the shift deadlines of the lubricant material, pour a car that is not suitable for type, class or season. Why it is important to use recommended engine oil for Nissan Qashqai. We will tell in this article.

Taking a selection of engine oil for Nissan Cascaja, it is worth considering the manufacturer's recommendations of the machine. Required information regarding the type, class, viscosity of the car, as well as the timing of its replacement are set forth in the instruction manual vehicle. Special attention should be paid to the viscosity characteristics of lubricating mixtures. Fluids designed for the winter should not be used at very high temperatures overboard cars. Lubricant, designed for the summer, does not withstand too low temperatures And begins to crystallize. All-season oils are a certain alternative between the two previous types of lubricants, but buying all-season should pay attention to the temperature at which the liquid can be used. For example, semi-synthetic cars operate in a smaller temperature range than synthetic. Mineral fluids are recommended to pour into motors with a large mileage.

Recommended motor oil for Nissan Qashqai meets the technical characteristics and constructive features Engine of the specified auto model. According to tolerances, the buyer may understand that motor fluid Suitable for concrete brand Machines, provides normal work and motor protection. If the engine fluid has been tested, for example, on Nissan Casca and satisfied the requirements of the plant's manufacturer, the corresponding tolerances will be present on the canister with oil.

Nissan Qashqai J 10 2006-2013

Characteristics of oil

According to the manual, you need to pour motor oils that meet the following requirements:

In HR16DE or MR20DE auto motors:

original motor fluid Nissan;
according to the API - SL or SM standard;
according to the ILSAC specification, the GF-3 or GF-4 group;
in accordance with ACEA - A1 / B1, A3 / B3, A3 / B4, A5 / B5, C2 or C3.

In the power units of K9K EURO 4 without a smbed filter:

original nissan lubricant;

For K9K Euro 4 engines with summer filter (For some versions of the car):

by ACEA - A1-B1 (with parameters corresponding to the group ACEA - B3 / B4);

For K9K EURO 5 engines with a diesel filter (for some versions of the car):

according to aCEA classification - C4;
"Low Saps" (having low ash content).

For M9R motors without a smbed filter:

original Nissan engine oil;
by aCEA standard - B.

In M9R auto motors with a diesel filter (for some versions of the car):

nissan branded lubricant;
according to aCEA specification - C4;
"Low Saps" (having low ash content).

In R9m motors:

original Nissan engine oil;
according to ACEA - C4;
"Low Saps" (having low ash content).

Filling capacity

Oil viscosity

For diesel engines The following requirements for oils for viscous characteristics:

In the power unit, K9K is preferably used SAE 5W - 30. If such an oil is absent, then using the scheme 1 it is necessary to choose the corresponding liquid.
For M9R motors without a particulate filter, you can only use 5W - 40 or 0W - 40.
For K9K and M9R engines with a diesel filter (for some versions of the vehicle) or R9M apply only 5W lubricants - 30 groups "Low SAPS". (low-rise).

Scheme 1. Classification of lubricants for viscous characteristics for gasoline engines Or Motors K9K without a diesel filter depending on the temperature range of the environment.

According to the scheme, you need to use auto:

5w - 30 in the temperature range of -30 ° C (and less) to +40 ° C (and higher);
10w - 30; 10w - 40; 10w - 50 under -20 ° C to +40 ° C (or more);
15w - 40; 15w - 50 in the temperature range of -15 ° C to +40 ° C (or more);
20w - 40; 20w - 50 under -10 ° C to +40 ° C (or more).

Nissan Qashqai J 11 since 2013

Characteristics of oil

For HRA2DDT engines:

nissan branded motor fluid;
according to the ACEA - A3 / B4 standard.

In the MR20DD power units:

nissan branded engine oil;
specifications ACEA - A3 / B4

In K9kvyvigators K9K:

corporate Lubricant Nissan;
quality class by ACEA - C4;
"Low Saps" (low-rise).

For R9M Automotors:

original Nissan engine oil;
quality class by ACEA - C4;
"Low Saps" (low-rise).

Filling capacity

Oil volume required for replacement, with oil filter And without:

Oil viscosity

For gasoline engines, it is preferable to use 5w - 40. In the absence of said liquid, it is worth choosing oil according to Scheme 2.

In diesel engines, K9K with a diesel fiber is recommended to use only 5W liquids - 30 "Low SAPS" groups (low-rise).

For R9M units operating on DT, it is allowed to use only 5W - 30 DPF groups "Low SAPS" (low-rise).

Scheme 2. Classification Automobiles for viscous characteristics for gasoline engines depending on the temperature range of the environment.

According to Scheme 2, you can choose the following cars:

5w - 30; 5w - 40 at a temperature of -30 ° C (and less) to +40 ° C (and higher);
10w - 30; 10w - 40; 10w - 50 in the temperature range of -20 ° C to +40 ° C (or more);
15w - 40; 15w - 50 under -15 ° C to +40 ° C (or more);
20w - 40; 20w - 50 with temperatures range from -10 ° C to +40 ° C (or more).

Conclusion

Recommended engine oil for Nissan Cascais is selected with reference technical characteristics Power unit. For some models, Nissan Cascais manufacturer it is recommended to use only oils that meet the requirements of DPF "Low SAPS" (low-rise). Selection of cars for petrol engines It is carried out taking into account the temperature beyond the car, the desired fluid can be selected using the schemes 1; 2 set forth in the manual to the car. For most diesel aggregates more stringent requirements are imposed, allowed lubricant, having viscosity, specified factory - Manufacturer of the car.

Today, the lubricant market offers vehicle owners wide selection Oils for motor, transmission, etc. Different brands give our products with a certain set of qualities. It can also be significantly different.

One of the high-quality products is Nissan oil. This Japanese brand has developed many variable variable products that are intended for different marks cars. What is this oil, what characterizes it is characterized, will be considered further.

Manufacturer

Japanese company Nippon Oil Corporation is known all over the world as one of best manufacturers Original lubricants. All products complies with high international requirements. Also presented products received the approval of the State Standard of the Russian Federation. For our country, oils are produced taking into account the characteristics of the climate.

In large demand in the domestic market enjoy nissan oils for automatic transmission, Motors of the old and new sample. The world has long become the usual practice of cooperation of advanced manufacturers of lubricants with engineering corporations. They exchange their developments, which allows producing products as high as possible.

Not exceptions and lubricants "Nissan". This brand is one of the activities of the machine-building company of the same name. Owners of cars brand "Nissan" can pick up the most suitable oilwhich will protect the vehicle system from adverse effects.

Features of products

Choosing nissan oil for variatoror the motor, it is necessary to consider a number of features of such products. Oils are made on the basis of high-class components. Their viscosity is well balanced. All-season oils can be used both in severe heat and in the cold. It is important to properly select the type of viscosity corresponding to the climatic zone.

The bases are based on additives. They are designed to neutralize the products of chemical reactions that occur in the mechanisms with a large heating. As a result, corrosion and naars appear on the details of the piston category, the crank-connecting rod mechanism.

The composition determines the low sulphate ash content. It increases environmental indicators Lubricants. When using the products presented, transmission, engine and other systems and mechanisms will be securely protected from wear.

Motor oils

When choosing lubricants, it is necessary to clearly follow the recommendations of the manufacturer of the motor. At the same time, it is necessary to take into account its configuration and mileage. As a rule, the owners of even the oldest models of cars do not pour hydrocracking mineral oil. Nissan Almera (1995), Micra (1992), Primera (1996) and other fairly old models are well tolerated semi-synthetic oils.

The cost of semi-synthetic will be relatively lower than that of synthetics. So, original oil "Nissan" of this category can be purchased at a price of 350 rubles / l. It includes both high-class synthetic components and minerals. Menten the presented means in engines with mileage will be required more often.

For cars with a new sample engine, the company has developed a line of synthetic agents. This product is most technological. It is capable of providing normal operation of the motor even under loading conditions. The price of synthetic is from 500 rubles / l.

Transmission oils

After deciding to replace the oil in the transmission, it is also necessary to carefully treat the choice of oil type. First of all, it should be noted that there are products for mechanical and automatic gearbox. In the first case, you can buy oil at a price of 350 rubles / l. For automatic boxes The programs on sale are presented products, the cost of which is from 450 rubles / l. One of the popular varieties of compositions for automatic transmission is oil CVT Nissan.

Also, when choosing a gearbox lubricant, it is necessary to consider, in what conditions the mechanism works. For small and medium loads, preference should be preferred by the composition of GL-4. If the work of the car is associated with significant overloads, it is necessary to acquire the GL-5 tool.

In the first type of oils there is a smaller amount of detergent additives. Similar funds are cheaper. The GL-5 standard suggests the use of a larger amount of native, detergent and other additives. This allows you to protect the movable elements of the mechanism from wear.

Viscosity class

Engine Nissan Oil Or transmissions is made by the Japanese brand for new technologies. Due to the special approach to the creation of the base base of the oil, a balanced set of additives, the presented products can be used in the system throughout the year.

All-season oils have a high ability to adapt to environmental conditions. Due to good yield, oil does not freeze in the system in the frost. In the summer, with an increase in overload, the oil becomes more liquid. However, special technologies do not allow it to fully flush into the crankcase. A thin but durable film is formed on the surface of the mechanisms. It protects surfaces from mechanical damage.

For the southern regions of our country, it is recommended to acquire engine oil with a viscosity class by SAE 10W40. For drivers who are more likely to exploit the car in the middle climatic strip will be suitable for viscosity class for the north climate more suitable oil Standard 0W20.

Action of additives

Contains a certain set of additives. This allows you to apply the presented product in different conditions. In the manufacture of motor transmission oils The Japanese brand applies only high-quality modern components. The amount of sulfur, phosphorus and other adverse components of the additive package are reduced to a minimum.

One of the main appointments of the additive is the creation on the details and mechanisms of fine, but very durable films. It should not be collapped under the influence of temperature and pressure. These requirements are fully replied by the presented products.

Also additives counteract the emergence of corrosion, the destruction of the oil base. They have a cleansing effect. Pollution, Nagar is collected by oil from the mechanisms. In the process of the entire life of the lubricant, these particles securely holds the lubricant, without giving them to settle on the surface surfaces again.

Benefits of oils

Since Nissan oil is original product Machine-building concern, all the parameters of the compositions are thorough testing directly in production. At the same time apply real engines "Nissan." This allows the company to offer the buyer not just high-quality oil, and the composition that will be better than others to approach the features of the motor operation.

The process of creating new formulas is continuous. New scientific developments The company applies when creating its lubricant products. These are high-tech, clean, durable oils. They are able to reliably protect the mechanisms from premature wear and destruction.

When using the optimally suitable composition, the engine is maintained clean, not subject to adverse environmental impacts. Its repair will be needed still not soon. The system will work stably, on full power. In this case, the toxicity of exhausts will be much less.

How to distinguish fake

Replacing Oil in Nissan Must be done in a timely manner. The manufacturer has recommended recommendations for the frequency of this process. In some cases, drivers may encounter a situation where the original oil is not different. high quality. If the operation of the motor has become noisy, its power falls, it means that a fake was purchased.

Everyone can distinguish with poor-quality products. It is important to know which nuances need to pay attention to. The plug, which is closed by the canister, should be indign. The company's branded hologram must be printed in the form of a 3D picture. Also on the bottom there should be a badge with the number of the party, the code. Also from the bottom of the canister must be applied by Putinka. In this case, the contents of the canister should have dark color. Fake will be lighter. If this composition is freezing, it will acquire a white-blue shade.