Motor washing, wash or not washed. New way of car wash on your own! Using high pressure mini

Sometimes you want to please your car with water treatments. However, if there is no question of washing or washing the body and the interior of the car is not worthwhile, then the engine washing causes some concerns. Now we will try to figure it out in its subtleties and in complete with our own hands wash the engine.

How often do washing a car?

It is believed that the engine washing procedure as a replacement of oil - it can, of course, can not be done and ride, but here's a guarantee that there will be no time for a long time. Copy under the hood oil stains do not like the work of electrical equipment, threatened sad consequences, Up to the fire of the car.

Of course, we do not advise you every week to resort to the services of the engine washing, but also you should not fully ignore it, find that golden middle, For example, while driving on a car wash, make the engine pleasant. By the way, now, when you make a list of preventive measures to prepare for the spring-summer season, it is possible that it will appear in it another item.

When visiting a car wash you can alert the inscription that the administration is not responsible for problems that can be caused by the engine washing. Therefore, maybe it is not necessary to overpay and make a car wash of a motor compartment on your own? In addition, following our recommendations, you can do it easily and quickly. Let's proceed?

Car wash with your own hands

To begin, it is necessary to purchase a means for washing the engine (yes - yes, you should not try to drop dishes to wash oil spots, for this, specialized means developed for engines are sold in the auto chemical departments). And most importantly - in no case should not be used gasoline, because any spark, and there will be enough discharge of static electricity between the body of the car and your clothing, it can provoke fire. Also, it will not be superfluous to prepare a small scraper (if it is not, you can use a screwdriver with a long handle or, more better, wooden blade), painting brush, toothbrush, garden sprayer or a small water container.

Before the sink itself, it follows the brush to clean the engine from the leaves, branches, insects, etc. Then with dense polyethylene, wind all electrical contacts and fix them with tape. We apply a detergent, leave for 10 minutes, then proceed to the wrapper by water. By the way, water should be used quite hot (70 ° C), as oil spots will not be laundered with cold water.

The final and most responsible stage is the drying of the engine, which can be carried out either with the help of a conventional vacuum cleaner or compressor. Remember: not dried water is very dangerous for electrician and auto engine. If you do not have the opportunity to dry the windscarette after washing compressed airTrying to prevent water from the high voltage wires, electrical equipment, module or ignition coil. And the main advice - not under any pretext, do not start the engine until the remains detergent will not be completely removed from its surface.

We hope our advice will be useful to you, however, in spite of everything you doubt your abilities, we advise not to feel fate and entrust the heart of your iron friend to professionals who have the necessary experience, skill and equipment. And in any case, do not neglect such a procedure as the engine washing, because the above is a serious proof that it carries not just aesthetic satisfaction, but also practical, and this, you see, it is important! By the way, from time to time should be carried out and, which you can also perform on your own. Love your car and take care of him!

Any car enthusiast is regularly washes its car, as the net body has aesthetically pleasant appearance and less susceptible to the corrosion process. Over time, all owners of the car get a question of the engine washing for cleaning all the dirt that has accumulated under the hood. The opponents of this procedure are not harmoniously guided by the principle of "no harm", which is due to the capriciousness of electrical equipment during contact with moisture. But the arguments in favor of washing are much more, it is possible to do and need, but in compliance with precautions.

Why wash the engine and motor compartment

A good engine with the absence of oil and coolant fluxes needs a periodic washing based on the following considerations:

The engine without dirt is not inclined to overheating. Dust layers serve as a heat insulator that creates an excess load on the cooling system.
Clean engine easier and more pleasant to serve. Replacement at oil maintenance station, ignition candles, filters or technological fluids With a dirty power unit, it can cause a careless attitude to the car from the masters and reduce the quality of his work.
Dirty motor compartment More fightered. There are cases when the oil appearing on the engine and other parts of the compartment caused ignition due to the ignition of combustible vapors from the spark, superheated or damaged exhaust manifold, the breakthrough of exhaust gases.
A clean engine immediately allows you to detect the place of the drift and quickly eliminate the problem, without waiting for its exacerbation.
When selling a car probability faster find a buyer, having clean engine, above.

Preparation for the engine washing

Before starting the procedure for washing the engine compartment, certain preparatory actions are performed to prevent the negative impact of moisture on the wiring, electrical appliances sensitive to the wetting parts. Procedure Next:

Disconnecting minus battery terminal.
Dismantling protection of the engine compartment.
Protection of sensors, connectors and wires with scotch joints and polyethylene film. A good effect is given water-repellent aerosols, which are processed by connectors and electrical contacts.
Disconnecting parts and nodes that interfer access to the engine.

Than to wash the car engine at home

When choosing a detergent for the engine, it comes from the density of the location of the aggregates under the hood. In simple and relatively old machines, it is not filled too tight, which allows the use of vials having a manual sprayer. Such a design provides accurate meal dosing and saving it. For new cars, aerosols are suitable for new cars, allowing you to process all hard-to-reach places.

In automotive cosmetics stores there are concentrated detergents. They are not too convenient to use, but they are indispensable with strong pollution, allowing it to get rid of the large layer of accumulated mud at once. For the engine washing, it is prohibited to apply the means intended for the body due to the content of acid damaging metal parts. The use of diesel fuel and gasoline is unacceptable, as it threatens with instant ignition in the engine compartment.

See which exterior engine cleaners are better coping with their work:

How to wash the car engine yourself

The engine washing is carried out in the following ways:

Installation for washing under pressure. This method It is not the best, since a powerful jet of water can damage the insulation on the hood and knock down the stickers with information in the engine compartment. Also, water under pressure penetrates the inside of the connectors, where he does not dry out for a long time, provoking the refusal of electrical equipment, and causing corrosion.
Washing a pre-applied detergent composition of a weak jet of water or watering from the bucket.

To carefully remove the deposits of dirt and flows of technological fluids when washing the engine compartment, special detergents are used. Depending on their species, the method of application and preparation varies in detail painted in the instructions on the packaging. It is impossible to produce a hot engine car wash, as the remedy on the unit of the unit dries. The procedure itself is performed in the following order:

After preparatory work The engine is applied to the engine and expect during the time specified in the instructions.
With the help of brushes, the most contaminated, hard to access and problem places Engine.
Washing detergent. The operation is repeated until the foam and dirt from all sites are completely removed.
Removing the previously installed isolation from film and tape.
Dry engine compressed air. Particular attention is paid to candle wells, contacts and varnishes where water is going.
Starting the engine and checking its uninterrupted operation.

The engine washing, made with ignoring the above rules is dangerous with its consequences, the most innocuous of which is not a starting engine due to water from entering the electrical wiring connectors. Sometimes car owners do not take into account the significant temperature difference, leading to the deformation of the cylinder head. For this reason, the washing in the winter is better to postpone until the summer.

During the procedure itself, it is impossible to use a strong jet, working with a connected battery and apply detergents for this not intended.

Outcome

When everything is done correctly, and the sink is made with all precautionary measures, the result of the applied effort will be a clean engine compartment, pleases not only appearance, but also the absence of certain technical problems. With uncertainty B. own power, it is better to resort to the services of a specialized service that will not only perfect its work, but also will give warranties possible troubleshooting power aggregatecaused by washing.

Each owner of the car sooner or later asks itself, how to clean the motor, whether this procedure is needed at all and how such a process can affect work vehicle. I propose to consider all the shortcomings and positive sides Washing the engine, and find out how to wash it right on their own without resorting for help from a specialized service station.

Almost for each driver appearance Its car is of great importance, however, the engine, like other items, is contaminated with time. There are a number of major reasons why the motor should be cleaned regularly, let's consider them in more detail.

First, a clean engine will play a big role when selling a car, because the first thing that the buyer pays attention is a commodity view.

Secondly, the dirty motor is able to overheat much more often than clean. This later can lead to engine boiling, since the increased temperature of the lubricant system significantly reduces the viscosity of the oil.

Thirdly, oil and dirt are capable of rendering a negative effect on the robot of electrical equipment. Wiring or other electrical mechanisms can fail or create a closure in general.

The fourth reason why it stands at least to wash the engine is yours fire safety. Because, oil spots that accumulate under the hood is not woven the motor, can easily light up.

And of course, you may have difficulties associated with maintenance car. For example, due to the dirt, the driver may not notice small malfunctions capable of leading to serious breakdowns.

Dirty engine, negative moments

1. In the sink of the engine, it is necessary to handle with extreme caution with easily flammable detergents.

2. There is especially difficult to carry foreign cars, as water is capable of getting into electrical equipment even through polyethylene.

3.Servis services need to be chosen more carefully, because the work of your car will be dependent on the competence of workers.

4. If you decide to wash the engine yourself, follow the quality of drying, as the engine drying is incorrectly, can lead to the closure of the wires.

Car manufacturers advise to wash cars only in cases of necessity that the owner of the car must determine independently. Do not forget that dirt is not able to harm your car as much as water.

My engine per service station, why do not wash Karcher

When choosing a sink, it is worth learn about the price, the quality of the services they provide and about the professional skills of workers. Extremely unwanted to trust such an important procedure to anyone. Ask how workers will produce a car wash and whether they will apply structures high pressure.

As for the washing of the Motor Karcher, then there are a number of reasons for which specialists do not advise it to do this:

1. Powerful jet is able to break through the capotic insulation or wash the inscriptions that are located on the engine nodes.

2. Suite that penetrates the engine, it does not go anywhere and in the future it can cause corrosion.

3. It will not be able to protect the injection of liquid into the rubber, candlestones or a relay case.

If you all decided to use Karcher, then, after the procedure, you need to apply compressed air, which will remove the unnecessary moisture. It is important to know what is optional to use a high-pressure washing, since today there are other, more sparing motors cleaning options.

It is worth saying that if your car is under warranty, you should carry out the engine washing every three years, and it is necessary to do this in high-quality service. Thus, in the future you can easily present a claim for malfunctions in the work of the engine. As for the old cars, it is better to clean the car on their own, observing the accuracy and the necessary rules. Also, resorting to the help of car washers, it is advisable to attend their work.

My engine with your own hands, engine washing technology, all works in stages and detail

There are some technologies that need to be observed when cleaning the engine independently:

1. Perfect washing. It is necessary to heat the engine up to 30-40 degrees Celsius and drown.

2. Interactors and signaling carefully close from water from entering water.

3. Ackumulator and other electrical equipment are also closed using polyethylene packets and fix them with tape.

4. Only specialized detergents can be used.

5. Apply the detergent on the engine and we are waiting for a while, so that the dirt would be completely spacing.

6. With the help of the tassels, we clean all the hard-to-reach places of the motor.

7. Singing the engine and repeat the above-described process, if the contamination is not completely laundered.

8. We care protective polyethylene packages.

9. The engine.

10. The motor will make sure it works.

11. Having sweep.

Special detergents, materials and tools assistants in work

When washing the car, several types of substances are used, they can be divided into categories:

1.Universal substances, they are used for washing the entire car.

2. Special means, they purify certain vehicles, for example, a motor.

It is strictly forbidden to use washing powders for washing the engine or any other detergents. Some drivers are used for this gasoline or diesel fuelWhat can not be done. After such a wash, when the motor starts from under the hood, there will be a powerful smoke white color And it will blame gasoline. Also, due to the minimum spark, it often occurs.

Pallet Carter My on the overpass

When washing the engine, the cylinder block and the crankcase pallet must be cleaned particularly carefully. Also, special attention should be done by washing high-voltage wires, because the dirt that accumulates them, promotes the current leakage to the ground. And this is capable of violating the operation of the motor and problems when it starts. It is important to know that the pallet of the crankcase can be high quality only on the overpass.

Drying engine after washing

The best way to dry the motor is the compressor. It can be replaced with a vacuum cleaner in the mode of blowing or a sphawed aircraft. It is necessary to dry the places of connection of electricians and contacts. Also, it is recommended to treat them with a special aerosol with an anti-corrosion effect.

Washing of diesel engine

The diesel engine is not very different from the usual, it has reinforced valve parts and is able to cope with large loads. When performing it to clean, you should follow the above instructions, however, it is in fact unrealistic. It is only necessary to trace that the hoses do not flip from high pressure and water did not get into the system. If the motor blisted poorly when assembling, oxidation processes can begin.

As for the battery, generator or starter, they can be washed constantly.

conclusions

As you yourself have already understood, the car's motor was not only allowed, but it is necessary, the truth is to do it extremely rare. Performing this procedure yourself, you need to stick simple rules and comply with security techniques. Do not forget to dry everything carefully. If you applied to specialized hundred for help, choose only the responsible firms with qualified specialists.

It is very important to take this procedure with full responsibility, because any error may further affect the operation of the motor. Dirty engine does not carry danger and will not change technical characteristics Car, but the water that fell inside or the wrong choice of detergents is capable not only to damage, but and "kill" the heart of your car.

Maintaining a car clean - the task of any car enthusiast. In this case, the car must be clean not only outside, but also inside. Most drivers retain the salon in the tidy state, but at the same time practically do not look under the hood, where dirt also accumulates. Open the hood only when a malfunction arose, is the incorrect decision in the root, and you should more often pay attention to the state of the engine. Good prevention of problems with the motor is its timely cleaning. You can wash the car engine on a professional car wash, but it takes extra time and will require cash costs. At the same time, wash the engine of the car with your own hands does not work out, but it is necessary to do it correctly.

Car manufacturers recommend car owners to look under the hood only in cases where the consumable fluids are required. At the same time, the company's engine cleaning tips do not provide. This procedure is not really mandatory, but you can immediately be called several reasons why the machine can be maintained clean:

On the dirty engine it is difficult to track leakage expendable fluids - antifreeze, oils and others. Thus, the driver can stay in the ignorant for a long time, that he has a malfunction, thereby exacerbating it;
A large layer of dirt on the engine is dangerous from the point of view of fire. If the engine units are contaminated so much that it is difficult for them to transmit heat into the atmosphere, it can lead to overheating of the engine or its fire;
Clean motor consumes less fuel. If you understand the processes that occur in the engine, it can be noted that due to the contamination of its aggregates, the power indicators of the machine are reduced due to problems with the cooling of the motor. This leads to an increase in the fuel consumption and the wear rate of the engine parts;
The dirty engine leads to current leaks during electrical wiring. This can lead to problems with the start of the engine and, as a result, starter malfunction due to its continuous operation at the start of the motor.

Above lists only some problems that may occur due to the dirty engine of the car. Many services refuse to serve the car if she has a dirty engine, forcing the driver to pre-wash it so that you can conduct a visual diagnosis of motor units.

The desire to maintain a car in a purest state can lead to its failure. Many engine aggregates are susceptible to moisture, and if without proper knowledge, proceed to their cleaning, this may affect the following consequences:

Electrical equipment failure, up to the occurrence of short circuit;
Damage to expensive aggregates, for example, generator;
Flammation of the machine, due to the use of incorrect cleaning agents.

Modern cars "stuck" with electronics, with which problems may arise due to water from entering it. A number of aggregates risk cannot withstand a strong jet of water, but the choice of incorrect means for washing (for example, gasoline) can lead to ignition.

Before proceeding with the cleaning of the car of the car from the nanile dirt, lines, dust and other things, must be selected right place For "water procedures". Legislation Russian Federation prohibits wash the car in the courtyard at home, near the water bodies and in places where this procedure May lead to soil contamination. Better for washing the engine of the machine to use a garage that is equipped with a filtering system.

When the place is selected, it is necessary to make sure that the equipment for washing has a gradation in the pressure, since a strong water jet can spoil the motor units. It is also required to correctly select the detergent for the engine. It should:

To clean the engine it is better to choose specialized funds that can be bought at any car store. Such remedies are capable of cleaning oil trails, burnt salt spots and other dirt that accumulated under the hood of the machine. In addition, they do not harm plastic and rubber elements.

When the tools and the necessary tools for cleaning the engine will be available, the car should be prepared. To do this, do the following:

On this procedure for preparing the engine washing ends, and you can go directly to cleaning the machine's motor.

How to wash the engine of the car do it yourself

As noted above, to clean the engine from dirt on the car wash, it is necessary to set minimum pressure so that the water jet does not damage the nozzles and wiring. After that, proceed to the process of washing the motor, performing consistently actions:

Read the instructions for the cleanser and apply it to all the contaminated elements of the engine, and then leave for some time (usually not more than 5 minutes);
Next, wash the detergent and the engine will seem significantly cleaner, but there will be places where the foam did not get;
Re-apply a means for cleaning the engine, using a tassel or other device to get to particularly difficult zones;
After that, again wait for the time and rinse the water pressure;
When all items are cleaned, you will need to dry the engine. To do this, you can use a compressor or a squeezed aircraft, which is easy to buy in any computer equipment store. Some motorists dried the engine with a vacuum cleaner.

On this procedure, the engine washing can be considered completed. It remains to remove the protective polyethylene from the motor assemblies, install the battery and make sure that the machine works without complaints.

The washing of the boobspace and the engine for many motorists can be both a forced procedure and the desire to contain a car in maximum cleanliness and health. In the first case there is an urgent need to wash the engine oil and other engine oil technical fluidswhich formed drums due to various faults. Also, the engine often becomes dirty after the repair.

In the second case, the engine washing is made to maintain the purity and removal of the so-called mud "fur coats". According to a large number of owners, the dirt layer on the motor worsens the efficiency of heat removal from the engine, and can also be the cause of electrical equipment malfunctions, etc. As for the motor cleaning process itself from dirt, you can use the car wash services to remove the dirt water under pressure, as well as more delicately wash the motor itself.

Read in this article

Washing engine with your own hands

At the very beginning, we note that the engine is optimally in dry and warm weather, which allows you to quickly get rid of high humidity Under the hood after washing. For removing different pollution The engine is actively used by special compositions. Also used "soft" car shutups that do not contain acids.

It should be noted that at home for the washing of the motor, a kitchenware is quite suitable for washing dishes. Such tools are well removed fat, and also do not contain aggressive components that are capable of damage to plastic, rubber and other elements in the subcontrol space.

Additionally, a regular polyethylene package or foil, sponge, latex gloves, rag and brush with soft bristles. It is not recommended to use hard brushes, especially with a bristle of metal, since there is a risk of scratching soft surfaces. Also at hand it is worth having some food soda for cleaning oxidized electrocontacts.

How to wash the motor

Before starting the car wash, the engine must be cooled in case of heating to operating temperatures. Ignoring this requirement may lead to the fact that under the stream of cold water there is a risk of rapid cooling and subsequent deformation of heated.
The next step will turn off the terminals from the battery. As for, then it is necessary to refine location rechargeable batteries on a specific model. It is necessary to add that often the batteries of hybrids are located in the back of the car, so that the Motor washing on hybrid car In this case, it is not dangerous.
Next, certain elements in the subcontrol space must be protected from moisture. To do this, you will need the above polyethylene and foil. First of all, the engine air intake is closed. To do this, the package is perfect, which for the reliability of the attachment additionally should be wrapped with a scotch or tape.
Always remember how water getting through the air duct can lead to a serious breakdown! Also, the ignition coil is also closed, and other available contacts, terminals and elements of the electrical circuit. IN hard to reach places To protect against moisture, use foil.
Then you can proceed to the preparation of the detergent solution for the engine. For this, 1 liter Warm water is added about 20-50 ml. detergent. As for the car shut-offs, which is used for washing body, their use is not recommended due to the possible presence of aggressive reagents.
It is necessary to start the engine with light wetting surfaces with water. Water can be sprayed with a brush. After that, the sponge is wetted in the detergent solution, after which you should start the rubbing of contaminated surfaces. In those places where it is difficult to get, you should use a brush or brush. Details coated with mortar are left for 5 minutes.
If there are oil spots or drips on the motor, then such contaminations can be removed using a toothbrush. It is worth adding that this method is suitable for both plastic and metal surfaces. Another way to remove bold spots is a solution of kerosene and water. This solution is not desirable to use for plastic and painted surfaces. Kerosene is applied with water with a soft cloth, after which the surface rubs off and is immediately washed with a small amount of water.
The final step is to rinse the engine after washing. During this process, care should be taken. Minimizing the total amount of water falling into the location of electrical contacts and electrical equipment (even when taking into account that elements are closed with packages and foil), reduce the risk of unwanted moisture penetration. Try not to flush the detergent composition of an abundant jet from the hose or use equipment that gives water under pressure.
At the end, make sure that there is no need to re-clean the internal combustion and individual sections in the subcontrol space. If necessary, a complex or partial washing should be repeated.

Drying engine after washing

Immediately after washing, the motor cannot start, as the engine must be dried. For drying the unit, ordinary paper towels are well suited. With their help, it is necessary to remove water as much as possible. After that, you can remove the protection in the form of packages and foil. Make sure the moisture did not hit the protected items. When dropping droplets on the connectors and electrocontacts, they should also be carefully dried.

Finally, add that in case of detection of corrosion and oxidation of contacts, the AKB can be used by a solution of food soda and water in a 1: 1 ratio. This solution is applied using a toothbrush and allows cleaning the specified parts. Then it is necessary to wipe the cleaning places in the water moistened in water, after which it will be necessary to completely remove moisture residues with a dry paper towel or cloth.