Japanese Toyota RAV4 crossovers cannot be called cheap, because their owners can often afford to pay for the services of a service station, where they would have oil and other consumables replaced. And some motorists simply do not know where in "RAV4", they can hardly find a dipstick and do not understand how to use it. The phenomenon is not the rarest, since women often turn out to be the owners of this crossover.

Timely oil change in toyota engine RAV4 will prevent damage.

It is not enough just to know that there is a level meter near the filler hole through which the oil is poured. You also need to be able to correctly and step by step perform the procedure for replacing the used lubricant in the engine. The problem of unscrupulous car service employees who take not the smallest money for their services, but perform work at the level of beginners, is urgent. What is the reason for this attitude is difficult to say. But many RAV4 owners decide to change the oil on their own.

Replacement frequency

According to the official regulations, it is recommended to fill the RAV4 crossover engine with fresh oil at intervals of 10 thousand kilometers or once a year. But in practice, the interval can be reduced to 5 thousand kilometers. This is influenced by:

• aggressive driving style;
• dustiness and contamination of the area where the car is operated;
• regular driving under high loads (using a trailer, off-road, etc.);
• low quality of the fuel used;
• poor quality previous grease change;
• the use of inappropriate engine oil;
• excess speed mode etc.

That, the car "RAV 4", largely depends on its volume. Therefore, one should focus on the specific specifications of the motor installed on the machine.

Oil selection, specifications and volume

The procedure for changing the engine oil itself cannot be called complicated. The main attention should be paid to the selection of a suitable composition. Oil for Toyota RAV4 is selected based on several parameters:

• engine type (gasoline or diesel);
• working volume of the motor;
• viscosity class;
• quality class (API);
• the volume of the filled motor fluid;
• year of car manufacture.

Consider 3rd and 4th generations japanese crossover, including a restyled version of the 3rd generation of the car. We will tell you which oil is better to fill in a particular "RAV4" with one or another power unit. How much fluid you need to use depends on the oil filter used. Some lubricant is also poured into it before installation. The increase in the total volume is on average 200 ml.

"RAV4" 3 generations (2006 - 2010)

This also includes restyling for 2008. For cars of this type, 2 power units are provided.

1. 2.0-liter gasoline engine with 152 horsepower. It is recommended to use oil with a viscosity grade of 5W30 or 10W30 for it. According to the API, they choose between SL, SM and SN. The volume to be filled is 4.2 or 4.0 liters with and without the oil filter, respectively.
2. 2.4-liter gasoline engine with 170 hp. from. It requires from 4.3 or 4.1 liters of oil (with and without filter). In a 2007-2010 engine, the composition of the lubricating fluid to be poured must correspond to the viscosity class 15W40 and 20W50 and according to API SL, SM or SN.

"RAV4" 3rd generation (2010 - 2012, restyled version)

There are also two power units here. Both are petrol.

1. 2.0 liters and 158 power horse power... The volume of grease is 4.2 and 3.9 liters (with and without filter). The preferred viscosity grades are 0W20, 5W20, 5W30,10W30,15W40, 20W50. API uses SL, SM, SN.
2. 2.4-liter engine with 170 horsepower. Fill in from 4.1 to 4.3 liters of SL, SM or SN class engine oil. According to the viscosity grade, it is recommended to use 15W40, 20W50, 5W30, 10W30.

"RAV4" 4 generations (2012 - 2015)

If you have a Japanese crossover 2013, 2014 or 2015 model year, then one of 3 power units is under the hood.

1. 2.0-liter petrol engine. Its power is 146 horsepower. The API uses the same quality classes as their predecessors. The volume of engine oils is 4.2 liters (including filter) or 3.9 liters. (excluding oil filter). In terms of viscosity grade, it is better to use 0W20, 5W20, 10W30, 15W40, 20W50.
2. 2.5-liter gasoline engine with 180 hp from. In terms of quality and viscosity grade, the same oils are poured as in a 2.0-liter engine, but their volume is from 4.0 to 4.4 liters.
3. Diesel engine with a volume of 2.2 liters at 148 liters. from. The manufacturer recommends pouring liquids into the diesel engine, the viscosity class of which corresponds to 5W30, 10W30, 15W40, 20W50, 0W30. But the amount of lubricant used is the largest, since it ranges from 5.5 to 5.9 liters.

In terms of viscosity, be guided by the temperature conditions in which the car is operated most of the time. There are all-weather oils, as well as separate summer and winter oils. As the practice of operating the Japanese crossover and reviews of the car owners themselves show, the car feels good in any weather on lubricants with a viscosity of 5W30.

The ideal choice for "RAV4" will be the original japanese oil from Toyota, according to the owner's manual. But it is the most expensive, which is why owners generally prefer analogs.

Among the motor oil manufacturers trusted by Toyota owners, the following are noted:

• Shell;
• Castrol;
• Mobil;
• Total;

Having chosen what kind of oil you will pour into your "RAV4" crossover and how much it will be required for work, you can start the procedure.

Materials and tools

For self engine crossover "RAV4" manufactured by Toyota will need to prepare some tools and materials. This list includes:

• new engine oil;
• new oil filter;
• an empty container for draining the used grease;
• flushing oil or special mixtures (if you are going to flush the engine);
• rags;
• filter remover (some dismantle it manually);
• keys set;
• facilities individual protection (the oil is hot, you can burn yourself);
• carrying lamp;
• inspection pit for work.

Engine Oil Change Procedure

On Toyota RAV4 you don't need much time plus minimal set tools. The Japanese provided for a fairly convenient design of the machine for easy access to all consumables, including the oil filter and crankcase drain plug. If you have a crossover from 2001 or earlier, such as 2010, 2013 or even a brand new version of 2016, then the procedure is approximately the same for all motors. There are some differences on "RAV4" until 2001. They touch the oil filter.

Let's start replacing.

1. Drive the car into the hole. Be sure to park the vehicle on a level surface. It is advisable to change the engine oil immediately while it is still hot. If your Toyota has been parked all night in the garage or parking lot, warm up the engine to operating temperature. So the oil will come out in a larger volume and much faster than cold and viscous.
   
2. The machine should be de-energized and immobilized. To do this, remove the negative terminal from battery, enable hand brake and place the locking shoes under the wheels.
3. Find the filler hole under the hood and unscrew it. Go under the car where the drain plug is located on the crankcase. Begin to unscrew it carefully, do not rush so that the oil does not suddenly pour onto your hands and does not provoke burns. As soon as the first drops begin to appear, substitute an empty container under the hole and begin to drain the liquid. Wait for it to drain maximum amount lubricants. If the plug on "RAV4" does not lend itself to twisting with your own hands, use a crank.
   
4. When the oil is drained, let it cool slightly and visually assess its condition. Abrasive particles, debris, or severe discoloration can indicate potential engine problems. A simple change of lubricant will not solve them, therefore it makes sense to conduct a deeper diagnosis or check the car at a service station.
5. Use a dry cloth to thoroughly clean the plug and the engine oil drain hole. There is a seal on the plug, which must be replaced. It costs a penny, but when worn, it provokes a lubricant leak from the engine.
6. Next, go to the oil filter. There is a difference here depending on the year of manufacture of the Japanese crossover. On versions older than 2001, the filter is located at the top, and on machines manufactured after 2001, it is at the bottom about drain plug... Someone unscrews the filter with their own hands, but usually a special remover is required. The main thing here is to loosen the fastening, after which the filter can be easily removed manually.
   
7. Oil will also leak from the old filter, so it is better to put it in some kind of container so as not to spill grease on the floor or on yourself.
8. We install a new filter element. Remove all dirt and remnants of the old filter seal, if any. Then the gasket must be lubricated with fresh oil and filled inside the housing. The device is screwed into place until it stops, after which another 3/4 turn is done. Do this by hand, as excessive force may damage the housing. If your hands slip from the oil, use gloves.
9. Now it remains through the filler hole in the engine compartment in the corresponding volume. Its level should correspond to the "Full" mark. Wait a few minutes for the liquid to distribute through the system. Take another measurement and add some lubricant if necessary.
10. Start the engine, let it warm up for 1 - 2 minutes for idling... Stop the engine, wait another 2 - 4 minutes and check the level with the dipstick. It so happens that the indicator drops, which forces you to repeat the procedure, adding oil again, warming up the engine and measuring the level with a dipstick.

The main task of car owners of RAV4 crossovers manufactured by Toyota is the timely replacement of consumables and their correct selection... Refer to the instruction manual specifically for your vehicle with a specific engine. It contains all the specifications and key requirements for the oils used, consumables and spare parts. This will make it easier for you to self-service the crossover.

Thank you all for your attention! Do not forget to subscribe to our site, leave comments, ask topical questions and be sure to invite your friends to us!

For the engine to work for the entire operating period with normal efficiency, it is necessary to provide education protective film on his internal elements... This film is created by engine oil and depends on the quality characteristics of the lubricant. Incorrectly selected car oil interferes with operation power unit and reduces its resource. This article describes the recommended engine oil for Toyota RAV4.

1996 model

SJ class car oil labeled "Energy Conserving" (energy saving) according to API standards or all-season motor fluids certified by ILSAC are recommended to be used for Toyota RAV4 car according to the manual. The recommended viscosity of the lubricant is selected according to Scheme 1.

Scheme 1. Selection of viscosity depending on the temperature of the region in which the machine will be used.

According to scheme 1, if too low temperaturesif you use 10w-30, it will be difficult to start the engine. Therefore, the manufacturer insists on the use of 5w-30 if the thermometer is below -18 0 С.

The symbol shown in Figure 1 may be present on a container with a lubricant.

Figure 1. API service symbol.

Refueling volumes

The volume of engine oil required when replacing a Toyota RAV4 (3S-FE equipment) is 4.1 liters including the oil filter and 3.9 liters excluding the oil filter. The amount of lubricant between the maximum and minimum marks on the dipstick is 1.0 liters.

Toyota Rav4 II XA20 2000-2005 years of release

2003 model

According to the vehicle operating instructions for Toyota RAV4 (model 1AZ-FE), it is necessary to use the oil type SL or SJ with the inscription "Energy Conserving" in accordance with the API classification. It is also acceptable to use ILSAC certified multigrade engine oils. The designation "Energy Conserving" indicates the energy saving properties of the motor fluid. The selection of the viscosity of the lubricant is carried out according to scheme 2.

Scheme 2. Dependence of the viscosity of the car oil on the air temperature of the region in which the car is operated.

According to scheme 2, it is preferable to use a 5w-30 car oil, motor oils 10w-30, 15w-40 and 20w-50 should not be filled if the air temperature is below -18 0 С, since starting the engine will be difficult, plus fuel consumption by the car will increase.

The sign shown in Figure 2 indicates the compliance of the motor oil with API standards.

Figure 2. API service symbol.

Refueling volumes

For the 1AZ-FE Toyota RAV4 engine, the volume of engine fluid required when replacing is 4.2 liters with the replacement of the oil filter (the volume for a dry engine is 4.9 liters).

Toyota RAV4 III XA30 2006-2013 model years

2008 model

Gasoline car engines

For 1AZ-FE models, it is recommended to fill in universal motor oils of class SL, SM or EC (energy saving) in accordance with the API system with a viscosity of 20w-50 and 15w-40 or SL "Energy Conserving" and SM "Energy Conserving" with a viscosity of 10w-30 and 5w-30. Application original oils Toyota Genuine Motor Oil or an equivalent vehicle that meets the manufacturer's specifications contributes to the fuel economy of the vehicle.

In the case of 2AZ-FE engines, it is recommended to fill in original Toyota Genuine Motor Oil or alternative lubricants with similar parameters, certified by the ILSAC system or meeting the SL or EC class according to aPI classifications... The viscosity of the lubricant for 2AZ-FE motors is selected according to scheme 3.

Scheme 3. Influence of temperature on the selection of viscosity characteristics of motor fluid for engines of model 2AZ-FE.

According to scheme 3, it is possible to pour motor oils with a viscosity of 5w-20 and 0w-20, while 0w-20 contributes to greater fuel economy and good engine start in cold weather.

For 2GR-FE engines, it is necessary to use original Toyota Genuine Motor Oil engine oils, it is also allowed to use alternative lubricants that are ILSAC certified and canister approved. Recommended viscosity of 5w-30 motor fluid for 2GR-FE engines (see diagram 4).

Scheme 4. Recommended viscosity of engine oil for 2GR-FE Toyota RAV4 engines.

According to Scheme 4, oils with a viscosity of 5w-30 can be used at a temperature range from -18 0 С (or less) to +38 0 С (or more).

Diesel power units

According to the recommendations of the car manufacturer Toyota RAV4, for good operation of the engines of the 2AD-FTV and 2AD-FHV models, it is necessary to use Toyota Genuine Motor Oi lubricants or alternative motor lubricantscorresponding to the characteristics:

• class of liquid according to ACEA B1;
• oil groups CF-4 CF according to API classification (it is also permissible to fill in types of CD and CE greases according to API).

Refueling volumes

Refueling tanks:

1. Engines 1AZ-FE:

• 4.2 L with oil filter;
• 4.0 l excluding oil filter.

1. 2AZ-FE car engines:

• 4.3 l with oil filter;
• 4.1 liters without replacing the filter device.

1. Power units 2AD-FHV and 2AD-FTV:

• 5.9 liters if you change the oil filter;
• 5.5 without replacing the filter device.

1. 2GR-FE motors:

• 6.1 with a filter unit;
• 5.7 without oil filter.

Toyota Rav4 IX CA40 from 2013 release

2016 model year

Gasoline power units

For Toyota RAV4 engines (models 3ZR-FE, 3ZR-FAE and 2AR-FE), you need to use Toyota Genuine Motor Oil or alternative oils of similar parameters. It is recommended to pour lubricants with characteristics:

• energy saving liquids labeled "Energy Conserving" class SL or SM according to the API system;
• resource-saving motor oils with the designation "Resource-Conserving" SN class in accordance with API standards;
• iLSAC certified motor oils with viscosity 15w-40.

Selecting the viscosity, schemes 5 or 6 are used, depending on the car model.

Diagram 5 Recommended viscosity for 3ZR-FE, 3ZR-FAE and 2AR-FE engines depending on the air temperature of the region in which the machine is used.

For a wide temperature range, the manufacturer recommends pouring 0w-20 lubricants. In the absence of the specified motor oil, the use of 5w-30 is allowed, but with next replacement lubricant must be refilled with 0w-20. Difficulty starting the engine in cold weather is possible if 10w-30 and 15w-40 oils are poured. The conformity of the lubricant to API standards is indicated by the sign shown in Figure 3. This sign must be displayed on the container with engine oil.

Figure 3. API service symbol. Scheme 6. Recommended viscosity for gasoline cars with model codes having an “X” as the last character.

The model code can be found on the factory-installed plate. According to scheme 6, when using lubricants with a viscosity of 10w-30 or higher, at too low temperatures, starting the motor will be difficult. For the winter, it is better to pour 0w-20, 5w-20 or 5w-30.

Diesel car engines

In the case of engines of the 2AD-FTV and 2AD-FHV models, it is necessary to use Toyota Genuine Motor Oil engine fluids or alternative lubricants corresponding to the C2 class according to ACEA standards. The use of any other class of grease other than C2 is fraught with failure of the catalytic converter. To select the viscosity, use Scheme 7.

Scheme 7. Recommended oil viscosity for 2AD-FTV and 2AD-FHV Toyota RAV4 models.

According to scheme 7, it is recommended to use 0w-30 greases, they ensure optimal fuel consumption by the car and good engine start at subzero temperatures outside the car. In the absence of the recommended motor oil, 5w-30 filling is allowed.

For 2WW engines, it is necessary to use Toyota Genuine Motor Oil or alternative lubricants that meet the requirements of the car manufacturer. Recommended oil "Toyota Genuine Motor Oil 5w-30 Premium Fuel Economy for 2WW engine". For information on alternative lubricants, contact authorized dealer Toyota RAV4 cars. In the absence of approved lubricants, it is allowed to use motor oils of class C3 according to ACEA with a viscosity of 0w-40, 0w-30, 5w-40 or 5w-30.

Refueling volumes

The volumes of engine oil required when replacing are:

1. Car engines 3ZR-FE, 3ZR-FAE:

• 4.2 l with oil filter;
• 3.9 liters without changing the oil filter.

1. Power units 2AR-FE:

• 4.4 L with oil filter;
• 4.0 l without changing the oil filter.

1. 2AD-FTV and 2AD-FHV engines:

• 5.9 l with oil filter change;
• 5.5 l without changing the oil filter.

1. 2WW motors:

• 5.2 l including the oil filter;
• 4.7 liters excluding oil filter.

Conclusion

Recommended engine oil for Toyota RAV4 meets technical specifications motor, contributes to the formation of a strong protective film on the internal elements of the car engine. The manufacturer recommends the use of multigrade greases for Toyota RAV4, while the density of greases designed for summer is much higher than that of oils developed for winter. If the recommended lubricants are not available, please check with your authorized vehicle dealer to check the parameters of suitable alternative oils. The use of inappropriate lubricants can complicate the operation of the engine or contribute to its complete failure.

Recommended engine oil for Toyota Avensis

Toyota RAV4 2006-2012

On the market today compact crossovers a huge selection of models. Almost all car manufacturers can offer the buyer a car from this segment.

But 20 years ago, the situation was completely different. The compact crossover segment was in its infancy and the choice of models was very small. The first company to pay attention to the need for this kind of cars was tOYOTA company... Thanks to its vast experience in the construction of full-fledged SUVs, the company was able to create a car with good off-road potential. The first RAV 4 models did not have a special design, but oddly enough, the car fell in love with motorists. And there was a reason. Reliability, build quality, high ground clearance and four-wheel drive... Yes, this is not a full-fledged off-road vehicle with all the attributes necessary for off-roading, but it is impossible to storm impassable swamps on it. But in the conditions of a snowy winter and light off-road conditions, it can compete even with eminent models of SUVs. Lightweight and compact with a high seating position, the car allows a lot. And the ease of management makes it an indispensable assistant in the city and in the country.

Several generations of RAV 4 have already changed. Its design and dimensions have changed (within reasonable limits), but the dignity four-wheel drive vehicle remains to this day. TOYOTA company closely follows the development trends of the modern car industry. The company's engineers are updating not only appearance cars, but also bring new technologies to the design of the power plant. Power, environmental friendliness, minimum fuel consumption, the main postulates when building an engine in modern reality. TOYOTA engineers and technologists take into account all of the above requirements. Hence the new requirements for the maintenance of cars of this brand.

Currently, the manual for the RAV4 model requires compliance with the ILSAC GF4 specification or higher, the common specification for Japanese and American market vehicles. The ILSAC specification has legalized the use of energy-saving oils, oils that provide mandatory fuel savings, as a mandatory trend for modern technology. Liqui Moly GmbH offers for Toyota RAV4 an ultra-modern engine oil with pronounced energy-saving properties Special Tec AA 5W-30. This oil meets the latest requirements of the joint Japanese-American iLSAC classification - GF5, exceeds factory recommendations. The oil provides confident starting in cold weather, control over the formation of black sludge in the engine, compatibility with seal materials, catalysts of any type, the ability to work with ecological grades of low-density gasoline and helps to reduce fuel consumption by an average of 10% compared to standard engine oils.

A car is a complex system of parts that work together as a single organism. But if the heart of the vehicle, its motor, stops working correctly, then all other parts of the car will not be able to function correctly. Engine care and maintenance is an important time in the everyday life of every motorist and his four-wheeled friend. One of the most important days is the day of changing the oil inside the car engine, because you breathe in by changing the lubricant new life into every detail.

Of course, the frequency of replacement of working fluids is determined by each motorist independently - this will not happen without his knowledge. But there are certain guidelines that car owners should follow.

The main advisor in determining the frequency of replacing lubricants in the engine is the operating instructions.

Most experts believe that the oil change in the Toyota Rav 4 engine should be done once a year, or after 10 thousand kilometers.

But, despite the recommendations, you should know that difficult conditions exploitation lead to more frequent replacement oil fluid in the engine. The motorist himself must feel the moment when his engine stopped working as before and that its efficiency has significantly decreased, then change the lubricant inside the main body of the vehicle.

Required inventory and consumables

To carry out work on changing the oil fluid inside the engine, a certain list of tools is required, and purchase such replacement parts:

1. Filter for oil purification (04152-YZZA1), its kit should also include: two o-rings, a plastic insert for draining grease from the filtering part;
2. Extractor for filter type Specialty Tools TOY 640;
3. Collar and socket for a wrench for fourteen and twenty-four. The first is for removing the drain bolt, the second is for removing the filter;
4. Capacity for working off, rags;
5. It is also necessary to purchase oil for the 0W-20 type engine, the brand and company of the manufacturer can be chosen at your discretion. You can buy oil for Toyota Rav 4 of the original brand from the concern itself - Toyota Motor Oil 0W20. Idemitsu Zepro and Ravenol ECS lubricants are also considered good.

Replacing the lubricant in the Toyota Rav 4 engine

Before you start changing the lubricant and oil filter in Toyota, warm up the car engine to its operating temperature so that oil liquid warmed up and had better fluidity.

Then you need to drive into a pit or raise vehicle on a jack, then immobilize the wheels to prevent the vehicle from moving. In addition to the jack, you can also use a special lift, but usually such devices can only be found in repair services.

Prepare a container into which you will drain the waste, you can use cut oil cans, or an old basin.

TIP: Make sure that the heated waste lubricant did not get on your skin, it can cause burns;

Find the drain bolt on the bottom of the car and substitute a basin prepared for used lubrication under it. Then, using a wrench or a fourteen-headed wrench, unscrew the plug from the drain hole. The oil will immediately begin to drain into the container provided.

Clean off any dirt and old oil from the plug with a rag and screw the plug back to its original location.

After draining the used grease, replace oil filter the engine, which is located at the top of the engine (in versions before 2001), or below (in cars manufactured after 2001). Remove it and carefully set it aside, while note that there is also old used oil inside the filter - be careful. Clean the attachment point of the filter element with a rag, and install a new oil filter.

Toyota RAV4 is a compact city SUV, one of the most popular in the SUV class on russian market... High demand for this model due not only to good driving characteristics, but also to high reliability and affordable service. But on minor faults, the owners strive to save money, and in this case they prefer self service... This concerns the replacement supplies - for example, selection and replacement of engine oil. Which oil to choose, based on what parameters and the best brands, as well as how much to fill in and what types of oils there are - we will consider all this in the article using the example of Toyota RAV4.

The oil change interval depends on many factors. These include climatic conditionsas well as driving style. In this case, first of all, one must pay attention to the regulations established by the manufacturer. For Toyota RAV4, it is about 20 thousand kilometers. But we must admit that such a replacement frequency is relevant only for favorable weather conditions. And Russian motorists will have to change the oil more often than prescribed by the regulations. For example, every 10-15 thousand kilometers. This can be considered a disadvantage, but on the other hand, if you follow such a regulation, the oil will not have time to become unusable, and power point will last much longer.

How to determine the condition of the oil

To check the condition of the lubricant, you need to look at its color, as well as pay attention to the smell and contents of the oil. So, if the liquid emits a specific burning smell, contains metal shavings and other traces of mechanical wear, then you definitely cannot do without changing the oil. Another sign of contaminated oil is dark brown... If the liquid is clear and does not contain any foreign impurities, then it will be enough to just add a little fresh oil to bring the level back to normal.

When to check the oil condition

It makes sense to check the condition of the lubricant when the following signs are found:

• The engine develops an incomplete power, is not able to develop maximum speed
• Increased fuel consumption
• Noises and vibrations
• Fuzzy gear shifting

How to choose oil and how much to fill

Let us consider in detail the tolerance standards, viscosity characteristics, degree of quality and other parameters that are best suited for the Toyota RAV4.

Lineup 2006-2010 (third generation, including the restyled version of 2008)

For a gasoline engine 2.0 1AZ-FE 152 hp from.:

• How much to pour - 4.2 - 4.0 liters
• SAE parameters: 5W-30, 10W-30
• API standard: - SL, SM, SN

• How much to fill - 4.3 - 4.1 liters
• API standards - SL, SM, SN

Lineup 2010-2012 (third generation, restyling)

For gasoline engine 2.0 32R-FAE 158 HP from.:

• How much to pour - 4.2 - 3.9 liters
• SAE parameters - 0W-20, 5W-20, 5W-30, 10W-30
• API standards - SL, SM, SN

For a gasoline engine 2.4 2AZ-FE 170 hp from.:

• How much to pour - 4.3-4.1 liters
• SAE parameters - 15W-40, 20W-50
• API standards - SL, SM, SN

Lineup 2012-2015 (fourth generation)

For petrol engine 2.0 3ZR-FAE 146 HP from.:

• How much to pour - 4.2-3.9 liters
• SAE parameters: 0W-20, 5W-20, 5W-30, 10W-30
• API standards: - SL, SM, SN

For a gasoline engine 2.5 2AR-FE 180 HP from.:

• How much to fill - 4.4-4.0 liters
• SAE parameters: 15W-40, 20W-50
• API standards: - SL, SM, SN

For diesel engine 2.2D 2AD-FTV 148 HP from.:

• How much to pour - 5.9 - 5.5 liters
• SAE parameters: 0W-30, 5W-30, 10W-30, 15W-40, 20W-50
• ACEA quality class: C2, B1
• API standard - CF-4, CF

The specified amount of engine oil can be poured in if the unit is completely cleaned of old oil, dirt, metal chips and other impurities. It is possible to clean the internal combustion engine components during a complex replacement, which is carried out at the dealership, using special flushing agents. As for the partial replacement, it does not imply a comprehensive cleaning of the block, and a small amount of mud deposits remains in it.

And yet, there is a proven method that allows you to perform complex cleaning without the use of rinsing agents. So, to achieve the desired result partial replacement is carried out in several stages - for example, 3-4 times with an interval of 500 kilometers. For the fourth time, the block must be completely cleaned of dirt deposits, and then it will be possible to pour new oil into in fullabove.

Which brand to choose

Toyota, like all car manufacturers, recommends using only original lubricant. But as an option, you can also prefer an analog oil, but you should choose from the most famous brands with a generally recognized reputation. For example, these include Mobil, Castrol, Elf, ZIK, Lukoil, G-Energy, Kixx and others.

Types of oils

We conclude the article with three types of oils that are currently the most popular:

• Synthetic is the best motor oil available today. Possesses unsurpassed viscosity indicators, optimal tolerance and quality classes. Also worth noting long term action of useful properties, which favorably affects the frequency of replacement. This oil is resistant to extreme temperature extremes, making it ideal for use in winter conditions - for example, in Siberia.
• Mineral is the thickest oil, which from this point of view is considered the complete opposite of more fluid synthetics. This oil is not recommended for Toyota RAV4, especially when it comes to newer versions of RAV4. "Mineralka" is better suited for old cars with high mileagethat have a high risk of oil leaks.
• Semi-synthetic - the best engine oil in terms of price-quality ratio. Includes 70% mineral and 30% synthetic oils... In terms of a set of advantages, semisynthetics are definitely superior to "mineral water", but noticeably lags behind pure synthetics. And yet, semisynthetics are a decent, higher quality alternative to cheap mineral oil.

It can be concluded that for Toyota RAV4 it is better to use oil on a synthetic or semi-synthetic base. So, the latter is better to use when the mileage is over 50-60 thousand kilometers.