For 20 years, Ford Focus has been retaining popularity, being an unpretentious and reliable car. To ensure reliable operation of its engine, it is necessary to apply motor oil, approved and recommended by the plant, or to upload a lubricant that has similar parameters.
Not only the operation of the power plant, but also the duration of the operation of the unit depends on the correctness of this selection. In our rating review presented the best oils Self different manufacturers, the main parameters of which are optimally suitable for each specific engine Ford. Focus (on the territory of Russia, the most common models with type motors Endura, Zetec-E, Duratec and Eco Boost (Fox) were obtained).
Best Synthetic Oils for Engine Ford Focus
Synthetic has the properties necessary for high-quality lubrication. modern engines, has a more reliable protection against oxidative processes and reacts little to high operating temperature inside the motor. Also an important feature of this category of lubricants is a large operating period, during which all the stated oil characteristics are preserved.
5 LUKOIL GENESIS ARMORTECH A5B5 5W-30
Best price category
Country Russia
The average price: 1 421 rub.
Rating (2019): 4.6
The oil was created on a high-quality synthetic basis, enhanced by a whole set of highly active modern additives Duramax, designed specifically for the line of synthetic lubricants of this brand. As a result, the products have good lubricating properties, an antioxidant effect, does not fade even with extreme loads.
Practically none of the reviews has critical estimates of this oil. There is an affordable cost, efficiency of motor operation, lack of neoplasms in oil system. Moreover, the existing deposits in the motor gently and gradually dissolve, and, without falling into the sediment, can be removed upon the next replacement of lubrication. As a result, the efficiency of the motor increases, the level of vibration and noise during operation without load is reduced.
4 Xenum OEM-Line Ford 913-D 5W30
Multi-level motor protection from wear
Country: Belgium
The average price: 2 888 rub.
Rating (2019): 4.8
Butter high Quality, low content of sulfates, sulfur and phosphate inclusions, can be poured into diesel and gasoline engines car Ford. Focus with appropriate tolerance. Provides minimal wrencies of friction pairs, the content of carboxylic acid esters (Esters) retains the oil film at high temperature loads, increases the operational cycle.
The reviews there are more economical operation of the motor, a great detergent effect, launching the engine in winter even with strong frosts Does not cause difficulties. The integrated selection of additives, which is part of the Xenum engine oil increases the resource not only internal combustion system, but also the exhaust system.
3 Mobil Super 3000 X1 Formula Fe 5W-30
Most popular oil. Best frost resistance
Country: Finland
Average price: 1 928 rub.
Rating (2019): 4.8
Worldwide Mobil motor oils have proven themselves as high-quality and reliable products. By purchasing this lubricant for the engine of its Ford Focus, the owners can get to the frank falsification, whose properties are able to spoil the engine even the tractor. In numerous reviews full of high marks performance characteristics Mobil Super, and only the lack of decency in some sellers spoils the overall picture.
In general, oil provides reliable work in the economy At any time of the year, winter is not something unusual for the product developed in Finland. It can successfully be used in the northern regions of the country, with more severe climatic conditions. In addition, the lubricant reliably protects the engine from overheating, does not form a naiga and stops the corrosion processes inside the engine. The integrated effect of this oil inevitably leads to an increase in the motor test.
2 Castrol Magnatec Professional E 5W-20
Good high-tech oil, providing a long service life of the engine with regular timely replacements. The molecular structure of lubrication provides the coating of parts, especially intensifying in places of high energies (points of contact of friction pairs) and preventing direct contact. Even at large intervals in the engine operation, the molecular structure holds the required amount of oil on the working surfaces and provides lubrication of parts until the moment as oil pump Create operating pressure in system.
Many owners of Ford Focus cars began to pour this oil from the first days of operation, and in their reviews there are full satisfaction with its properties and high-quality operation of the motor. In the process of use, there was no formation in the engine of any deposits and there is not even a hint of their appearance.
1 Ford Formula F 5W30
Original oil. Stable viscosity
Country: England
The average price: 1 785 rub.
Rating (2019): 4.9
Made specifically for automotive products Ford provides optimal conditions for the engine operation at any loads. The base lubrication base is obtained by the conventional hydrocracking method and thanks to the multi-stage cleaning system, it is not inferior in terms of the synthetic characteristics obtained from the gas. The surface of the parts inside the motor is covered with a sturdy oil film, which reduces friction, preventing premature wear of the engine.
In feedback owners of Ford. Focus is positively assessed by the stability of the viscosity of the oil, good fluidity with severe frosts, while improving the power of the motor and fuel economy. A set of high-quality additives ensures the stability of the oil structure - at high temperatures and long loads it does not dilute. Also has a good detergent effect without creating any deposits in the engine.
Best semi-synthetic oil for Ford focus
The semi-synthetic is actually a synthesized oil, diluted in different proportions of mineral. Temperature durability of such an oil is lower than that of clean synthetics, but the rest of the lubricant is perfectly coping with its task. Use looks more preferable in engines with great wear, but you can pour into modern motors. It should not be forgotten that the interval between replacements in this case will be less.
4 Comma X-Flow Type F 5W-30
Best price in the category. Increases the resource of the engine
Country: England
The average price: 1 610 rub.
Rating (2019): England
The peculiarity of this lubricant is the presence of an exclusive PCFINEUM package, which provides an excellent detergent and anti-corrosion effect. Thanks to the atomic inclusion of pH and Zn metals, the best slip indicators have been achieved, significantly reduced wear of parts during operation.
Ford Focus Owners characterize butter as reliable protection For motor. The reviews there is an improvement in the DVS dynamics, noise reduction during engine operation without load, fuel economy. When operating in the northern regions, Comma X-Flow has proven itself, providing a light launch in frosts, exceeding the mark in -30 ° C.
3 Motul 6100 Save-Lite 5W20
High level of chemical stability
Country: France
The average price: 2 500 rubles.
Rating (2019): 4.8
Another oil with the recommendations of the Ford manufacturer deserves to become a member of our rating. There are only two drawbacks of this product - relatively high cost and the ability to purchase a motul 6100 under view. The latter simply obliges the owners of Ford Focus to be more educated when choosing a seller.
As for the cost, then against the background of how the engine is "rejoicing" with this oil, and with each subsequent replacement increasing its resource, the price looks quite justified. Low sulphate ash content, satisfactory washing and oxidative effect prevent the burnout of the lubricant at any loads. Chemical stability in the conditions of high operating temperatures of modern MOS provides unsurpassed qualities and provides reliable protection of the engine nodes.
2 LIQUI MOLY SPECIAL TEC F 5W-30
High level of detergent properties. Increased interval between replacements
Country: Germany
The average price: 3,675 rubles.
Rating (2019): 4.8
Butter of this brand does not need advertising - it is one of the leaders in the lubricant market, asking a high level of quality. Despite the fact that the base of this lubricant was created on a mineral basis, the deep distillation technology (hydrocracking) made it possible to achieve quality comparable to clean synthetics.
Special TEC has tolerance for use in Ford brand cars. The high alkaline oil indicator (10.3) does not leave the chance for corrosion and other oxidative processes inside the engine, prevents the formation of sediments and nagar. There is an increased operational period and stability of work in high-energy modern motors, which is not entirely characteristic of lubricants of this category.
1 Ford Motorcraft SAE 5W30 Synthetic Blend
Best friction protection
Country: England
The average price: 1 729 rub.
Rating (2019): 4.9
Premium oil is created on a purest basis, which has passed a multi-step cleaning. Oil film is resistant to shift, oxidation and mechanical exposure. As a result, the phenomenal decline in friction, the increase in the power and resource of the engine. There is also a high level of detergent properties that support the purity of the lubricant system at the level of the new motor. To some extent, all these factors provide fuel economy.
Many owners constantly pour this oil into Ford Focus, especially since it is designed just for cars of this manufacturer. Lubricant has proven itself in completely different conditions of work. Available positive reviews From drivers who have been successfully used by Ford Motorcraft in the conditions of northern regions, rural areas (in off-road), as well as in ordinary urban conditions. Everywhere the oil copes well with the loads, retains its properties throughout the entire period of work.
Along with AvtoVAZ and Hyundai products, model Ford. Focus in our country is a cult. The number of owners is steadily growing, and this is not only buyers of new versions, but also the participants of the "secondary" market.
Before you buy a used car, the potential owner collects certain information:
- features of operation;
- disadvantages, advantages over classmates;
- the procedure for passing and the cost of regulatory work;
- what parts apply and consumables.
The last item will look for more. Today we will talk about what oil is best suited for Ford Focus 2, especially after the end of the warranty period.
The main problem for used cars - the owner often does not comply with the regulatory procedures, and trying to save on consumables. This leads to accelerated engine wear, or its breakdown.
What are poured in Ford Focus 2 at the factory?
It's no secret that there are no refining for petroleum products on automobiles. All liquid consumables are ordered from other manufacturers, and are supplied to the conveyor with the logo of the automobile plant on the package.
For the European Unit Ford Motor Company, the oil produces the French company ELF. Of course, on cannors and barrels there is a Ford logo, consumables refer to the brand of the autocontrace.
Oil for Ford Focus, as well as for many other models with similar motors, is called Förd Formula F 5W-30. 
It comes to 200 liter barrels, and dealer service stations can use 5 l and 1l packages.
Which oil is better for the engine Ford Focus 2
If you bought new car In the car dealership, it will be original oil. Moreover, during the entire warranty string you will not torment the question, which consumables should be changed when passing the planned, then (unless of course you are not going to violate the warranty conditions).
All work conducts a dealer workshop, Ford engine oil is filled according to the instructions for the regulations. 
Lubricants meet all parameters and quality standards:
It is quite high-quality semi-synthetic, which is tested by decades. With the advent of each of the next tolerance of the manufacturer, the composition of the additives changes slightly (of course, in best side), But the basic base remains the same.
For American owners (this model is also available for the overseas market) offers the products of the court supplier for Ford - MotorCraft.
There is an opinion of a number of experts and experienced motorists that synthetic oil The default is half a semi-synthetic, and even more so mineral water. Especially many similar tips concerns motors with solid mileage. It makes sense to argue on this topic.
The most correct recommendation is to adhere to the instruction manual. In regulations, the same oil is indicated in the regulations: semi-synthetic 5W30. Any scientifically proven facts of the wonderful transformation of an old motor into a new one (when switching to Full Synthetic) is not represented.
The use of a basic basis (as part of the factory tolerance) is a personal matter. It will not be worse for sure, improvements in the work of the motor also wait meaninglessly.
How many oil to fill in Ford Focus 2, and what is the stock "on topping" to leave until the next? Unambiguous Ford Focus 2 does not exist. More precisely, there are many options, depending on the type of engine.
| Ford Focus 2. | ||||
|---|---|---|---|---|
| Engine | L.S. | Year of issue (Beginning - End) | Oil volume in the engine (l.) | |
| 1.4i 16V. | 75 | 1999 | 2005 | 3.75 |
| 1.4 Duratec 16V. | 80 | 2005 | --> | 3.80 |
| 1.6 TDCI | 90 | 2005 | --> | 3.80 |
| 1.6 TDCI HP. | 109 | 2005 | --> | 3.80 |
| 1.6i 16V. | 100 | 1999 | 2005 | 4.25 |
| 1.6 Duratec 16V. | 100 | 2005 | --> | 4.10 |
| 1.6 Duratec Ti-VCR 16V | 115 | 2005 | --> | 4.25 |
| 1.8 Turbo di. | 90 | 1999 | 2005 | 5.60 |
| 1.8 Ti. | 75 | 1999 | 2005 | 5.60 |
| 1.8 TDCI 16V. | 115 | 2001 | --> | 5.60 |
| 1.8i 16V. | 115 | 1999 | 2005 | 4.25 |
| 1.8 DURATEC HE 16V | 125 | 2005 | --> | 4.30 |
| 2.0i 16V. | 130 | 1999 | 2005 | 4.25 |
| 2.0 DURATEC HE 16V | 145 | 2005 | --> | 4.30 |
| 2/0 TDCI | 135 | 2005 | --> | 5.50 |
| Oil used FRD WSS-913A / B SL SAE 5W-30 | ||||
The scatter is large enough if you buy standard packaging - there will always be a certain stock. It should be known that with a normal replacement (without a vacuum pump) in the motor there is always some amount of lubricant.
Therefore, the supply of 200-500 ml is provided anyway. With normal operation, and a good engine, this volume should be enough "to the topping" between that.
Important: If you buy oil in the North American packaging (in this case, it is MotorCraft), the volume will be somewhat less.
Unit of measurement in the USA - Quart (Quart). 1 Quart is 946 ml, so when ordering 5 liters of American oil, you will receive a European 4.73 liters. By the way, the oil volume in engines produced in the United States (for the USA) is tied to an integer number of Quart.
In any case, this amount is poured only in the "dry" engine. With the current replacement, the stock remains anyway.
Analogs of "corporate" oil for Ford Focus 2
There are no hard binding to the manufacturer. The main thing is that the Ford WSS-M2C913 admission is present on the label, and the SAE viscosity corresponded to the maintenance instructions.
Motor oil for Ford Focus 2 is not unique in composition, all the leading manufacturers offer a replacement: both more expensive and cheaper.
If you are a fan of clean synthetics, you can pour Castrol EDGE 5W-30 FULLY SYNTHETIC or CASTROL MAGNATEC 5W-30. For more economical owners, Motul 5W-30 913C or Lukoil Armortech Genesis 5W-30 is offered.
Often applied Petro Canada. SUPREME SYNTETIC 5W30 is a strong semi-synthetic from the USA. Moreover, when pouring any analogue, the complete flushing is not required. It is enough to reduce the first after changing the brand interval, up to 3000 km.
Ford oils are often formed
Most often you can meet fake corporate oil For Ford Focus 2. Determine the counterfeit is easy, here are the signs of the original:
What is the difference between fake oil from the original - video
Findings:
Buy oil for Ford Focus 2 is much easier than for many other foreign cars. With all the wealth of choice, it makes no sense to chase advertising promises. It is better to fill in the Ford focus engine corporate oil.
And in order not to get into counterfeit, consumables should be purchased in stores in which you can provide accompanying documents for the goods.
Life time car Engine largely depends on the timely replacement of oil, its quality and compliance temperature regimes operation. There is a considerable effect on the engine quality of the engine, consider the video as not to buy a fake of corporate oil. Conducting an operation to replace oil in service centers. Pleasure expensive, dealers offer dear consumables and work themselves are also not cheap. If there are even the most insignificant experience in repairing cars, this operation to replace oil on Ford Focus 2 can be carried out independently.
When oil replaced
In accordance with the terms of the manufacturer, the replacement of oil on Ford focus is carried out after 20 thousand mileage kilometers. A new car should be replaced by oil in 2 thousand after rubbing rubbing surfaces. The second replacement of oil in the new car is carried out at T-1 with a mileage of 20 thousand kilometers. It should be borne in mind that the manufacturer specified by the manufacturer This lubricant replacement interval is specified for normal working conditions. When operating the machine in heavy conditions The oil replacement should be carried out in 10-15 thousand. Trial operational conditions include:
- Extreme temperature conditions of operation;
- Permanent ride in metropolis and large cities;
- Long-term movement in the conditions of dusting (riding on dirt roads);
- Movement at elevated speeds (above 120 km / h) more than 50% of the operation;
- More than 50% of the operation of riding with a trailer.
The engine Ford Focus 2 oil during operation naturally decreases, its avgar occurs. Large operational fugar of oil differ power plants With a volume of 1.8 and 2.0 liters. Oil consumption, on top of these motors, can reach 200 ml per 1000 km of mileage, during operation with the load, this indicator can increase.
Oil selection Oil oil for use so as not to run into fake
The manufacturer recommends choosing synthetic oil for Ford Focus 2 appropriate requirements for Ford. WSS-M2C913-A and FORD WSS-M2C913-B. For these requirements, a large number of engine oils both premium class and existing more economical options are included. Quality lubricants Provide a light start of a motor, protect its details from wear and, like a bonus, minor fuel economy. To this segment of expensive oils include brands of manufacturers Mobil, Shell, Castrol and Liqui Moly. The average segment can include Total, Elf, Agip and Araral companies. The ratio of price and quality is wisely combined in them. TO budget oils You can attribute brands Russian manufacturerswhose quality is inferior to more eminent companies, but it is allowed to use as oil for Ford focus. Original Ford Oil Fully Synthetic Lubrication has a marking of Formula F. What kind of oil for Ford Focus 2 choose depends on the preference of the owner and its financial capabilities, but it should be borne in mind that there should not be somewhat different differences fake oil For formula F from the original. Examine attentively photos and videos so as not to buy a fake!
Pay attention to the labeling and quality of the canister
Selecting a filter element
Oil filter In the lubrication system of any car plays a very important role. In addition to cleaning the oil, it protects the system from the wear products of mechanical parts, the heat removes partially absorbs the noise produced by the engine. So what better filterThe better its technical characteristics. The original oil filter has an article 1.4 / 1.6 - 1714387/1883037, but it can be replaced with analogue response characteristics and manufacturer requirements. The most popular analogues of the Oil Ford car oil filter are:
- Suzuki 16510-61ar0.
- Bosch 0 986 452 019
- Bosch 0 986 452 044
- Fram PH3614.
- MANN W 610/1.
At the same time, the choice of filters to replace Ford oil is quite huge and determined by the preferences of the car owner and its financial condition. It should be borne in mind that it is not necessary to acquire at all cheap oil filters, the saying "miserly pays twice" no one has canceled. When buying a filter when replacing the engine in the engine, check it. What should be paid attention to:
- Absence mechanical damage Cases (dents, cracks, etc.);
- The integrity of the sealing rubber gasket;
- The lack of garbage and metal chips in the housing.
If you detect these flaws from the purchase, you should refuse and select another manufacturer.
Ford Focus Oil Replacement Procedure
To replace the oil, we will need an observation pit or a lift, as a last resort, the car can be signed using a jack. The last option is possible, but extremely laboriousness and dangerous. To carry out work:
- Capacity for spent oil with a volume of 5-6 liters;
- Set of a plumbing tool;
- Rag.
The replacement of oil in Ford Focus 2 is carried out on a heated engine, so work should be carried out with marginal caution to not get thermal burns. For the convenience of replacing oil replacement in the Ford engine, it is necessary to remove the protection of the crankcase when it is presented. Machine poured on watching pit and fixed with parking brake. The key of the rear fastener of protection is unscrewed by 17 mm, and the front mount screws are turned away with a 13 mm key. After that, it is worth carefully inspecting the plug hole. If there are heights of oil, or oil sediments should be changed. 
Warm the engine to a temperature of 60 - 70 o C and the key to 13 weaken the plug of the drain hole. After that, completely turning it out, pre-substituting the container under merging oil. After that, we turn the cork of the fuzzy neck and turn the oil filter. It usually turns away from hand, but in some cases a special key may be required. With its absence, the filter housing can be pierced with a screwdriver and replete with the gate. We are waiting for the exhaust oil fully goes away, usually care 
iT 8-10 minutes. Cleaning from dirt surface around the hole for draining and planting Oil filter.
Watch the plug in place, you should not make a lot of effort, you can disrupt the thread. Oil filter fill in fresh oil about ¾ and wrapping it into place by hand until the rotation stops. After that, we turn the filter about ¼ turn. Pour oil to the top label of the probe and start the engine. Let him work for 2-3 minutes. The moach motor and give oil to drain within 4-5 minutes. After that, we check the oil on the PCU, its level should be between level risks. With low level it needs to be addressed. We close the cork of the oil-wave neck, set the protection of the pallet and the car is ready for operation.
Selection of lubricants are made taking into account the parameters of the auto motor and its technical characteristics. Poor-quality or incorrectly selected machine leads to a set negative consequences. We invite you to familiarize yourself with the requirements for recommended engine oil for Ford Focus.
Model 2000 release
According to the plant requirements, the Ford Focus Car Manufacturer preferably use Ford's branded lubricants or Motorcraft Formula E, having a viscosity indicator SAE 5W-30. In the absence of original motor lubricants Alternatively, it is allowed to pour autosals that have a viscosity indicator of SAE 5W-30, which meet the standards of Ford WSS-M2C913-B.
The selection of viscosity is made according to Scheme 1.
Scheme 1. The dependence of the viscosity of the car from temperature ambient.
According to Scheme 1, it is recommended to apply liquids having a viscosity indicator SAE 5W-30. For topping you can use motor liquids SAE 5W-30, 5W-40 or 10W-40 corresponding to the type of oil A1 / B1 (preferably) or A3 / B3, depending on the ambient temperature. It is forbidden to apply cars with a viscosity of 10W-40 if the air temperature is less -20 0 C.
- ZETEC engines - SE 16V 1.4 l:
- 3.75 l, if we take into account the oil filter;
- 3.5 excluding the filtering device.
- Motors ZETEC - SE 16V 1.6 L, ZETEC - E 1.8 L, ZETEC - E 2.0 L, DURATEC ST 2,0 L:
- 4.25 liters, considering the oil filter;
- 3.75 without oil filter.
- DURATEC 8V 1.6 L:
- 4.2 l with oil filter;
- 3.7 without a filtering device.
- Motors Endura-TDDI / DURATORG TDCI 1.8 l:
- 5.6 l, taking into account the oil filter;
- 5.0 liters excluding the filtering unit.
Ford Focus MK2 2004-2011
Model 2006 release. According to the manual, the manufacturer Ford focus is recommended to use lubricants corresponding to the characteristics:
- original motor ford oil either Motorcraft Formula E;
- the viscosity indicator SAE 5W-30.
- wSS-M2C913-B tolerances.
It is permissible to use alternative lubricating liquidscorresponding to the requirements of WSS-M2C913-B having a viscosity of 5W-30.
Also in the instruction manual of the Auto indicates the following information:
- It is forbidden to pour oils having a viscosity indicator SAE 10W-40 if the ambient temperature is below -20 0 C.
- In the absence of cars, the corresponding requirements of WSS-M2C913-B are recommended to use auto sAE viscosity 5W-30. If there is no possibility to purchase recommended lubricants, you can pour fluids that have a viscosity of 5W-40 (except machines using FlexFuel fuel) or 10W-40, which according to ASA standards correspond to the class A1 / B1 or A3 / B3 oil. Preferably use A1 / B1.
The volume of lubricant required when replaced is:
- Complete set 1.4 L Duratec-16v:
- 3.8 l with an oily filter even;
- 3.5 liters excluding the filtering unit.
- Complete set 1.6 L Duratec-16v:
- 4.1 l with even oil filter;
- 3.75 liters without taking into account the filtering device.
Ford Focus MK3 2011-2017 release
Model 2015 release. From the instruction manual for auto-recommended engine oil for Ford Focus is determined by the type of engine. For engines working on gasoline, it is recommended to use motor oils ford or Castrol with a viscosity of 5W-20, corresponding to the requirements of WSS-M2C948-B. As an alternative lubricant, except Engines 1.0 L ECO Boost (Fox), you can pour the 5W-30 viscosity of the 5W-30 viscosity corresponding to the requirements of WSS-M2C913-C. At the same time, preference is worth paying products. ford companies or Castrol.
In the absence of these lubricants, it is allowed as a top of the use of oils with a viscous indicator 5W-30, corresponding to the ASE ASA class A5 / B5.
The volume of engine oil required when replaced is:
- For Motors 1.0 L Eco Boost (FOX):
- 4.1 liters with oil filter;
- 4.0 liters excluding the filtering device.
- For autodware 1.6 L Duratec-16V-VCT-SIGMA:
- 4.1 l with oil filter;
- 3.75 liters without oil filter.
On manual car Ford Focus, for diesel power aggregates Ford or Castrol lubricants are recommended with a viscosity of 5W-30, complying with the requirements of WSS-M2C913-C.
Conclusion
Recommended Motor oil for Ford Focus has a positive effect on the operation of the machine engine, increases the operating period of the lubricant system. Therefore, it is important to choose a lubricant suitable for a specific engine type, given the temperature of the region in which the vehicle will be operated. Do not apply liquids developed for summer at all low temperatures, and lubricants designed for the winter, pour in the heat. Buy all-season oils, it is possible if the ambient temperature difference corresponds to the working temperatures of the all-season fluid.
Please note the permanent ride on motor oils recommended for the topping is prohibited. Such exploitation leads to a set of negative consequences:
- increase the number of harmful impurities in the exhaust gases;
- reduction of the efficiency of the automotive;
- increasing the consumption of fuel;
- reducing the starter resource.
Also consider the basic base of motor oils during lubrication selection. Synthetic and semi-synthetic fluids operate with a wider temperature range than mineral.
Recommended motor oil for Hyundai Solaris.
Recommended motor oil for Toyota Corolla
Compact release american car Started back in 1998. The model passed several times restyling and large updates, and today it is produced in the 4th generation. You can talk about the comfort and top equipment of Ford Focus, however, to completely feel all its advantages, it is not necessary to do without a test drive. It is not surprising that the model is included in the top 10 best-selling cars in Europe and in 2010 for this indicator ranked first place in Russia. Focus was originally different not only good technical data, but also a very democratic price tag, which was in most cases a decisive factor when buying a car.
The second generation of Ford Focus 2 debuted in 2004 and was produced until 2011. From the previous one, it was different roomingly salon, improved quality of materials and interior design, as well as large dimensions. The novelty was developed on the basis of Ford C1 under the program of general global technologies implied by combining platforms of all models (the same base of the C-Max focus, Mazda 5 and Volvo series C70, S40 and V50). In 2008, the car has undergone a little facelifting.
Under the hood of the updated focus 2 were set petrol aggregates with volumes from 1.4 to 2.0 liters, as well as one diesel installation by 1.8 liters. Motor power varied from frankly weak 80 hp to impressive 145-strong. For lovers of adrenaline and drive, a turbo-modification of RS with 2.5 liters and a capacity of 300 hp was released. But the most popular in the market became edging models from the "Golden Mid" with volumes 1.6 (110-115 hp) and 1.8 liters (125 hp). They were aggregated with a 5-stupid mechanic or a 4-speed automatic machine. Read more about the number of oil, which is poured into these settings, and its views on.
Generation 2 (2004 - 2011)
Engine Ford Focus 1.4 l. DURATEC 16V SIGMA (ZETEC-SE) 85 hp
- How many litters of oil in the engine (total volume): 3.5 liters.
Ford Engine Focus 1.6l. DURATEC 16V (Ti VCT) Sigma 100 and 115 hp
- What engine oil is poured from the plant (original): Synthetic 5W30
- Oil types (viscosity): 5W-20, 5W-30
- How many litters of oil in the engine (total volume): 3.75 liters.
- Oil consumption per 1000 km.: Up to 200 ml.
- When to change the oil: 7500-15000
