In our article “ Car alarm Starline B9 — detailed description of all functions ”we will tell you about car alarm starline b9 and its differences from previously available models. Starline b9 is a brand new 12-volt alarm designed for a car. It has a motor start function and two-way communication. The set includes a new unique keychain. Two-way communication is established with an informative LCD display. Car alarm starline b9 is armed with a new unusual dynamic code StarLine ProPlusTM, which is protected from burglaries.
The code uses the interactive method of defining "own" key fob and distributes commands to switch on and off various security modes. The alarm package contains: a central unit, 2 remote controls (one is interconnected with the LCD and one without two-way communication), a two-level shock sensor, a Valet service button, a transceiver, an LED, a hood button. Keychains use a monotonous dialog code. Car alarm Starline b9 supports reception of motor blocking by digital radio relays. StarLine DRRTM is used as a digital radio relay. Everything is made especially compactly for a hidden installation. Thus, equivalent cryptographic resistance of the main and additional key fob is provided. As a result of using the new transceiver, the data transfer rate increased, and this affected the reduction in command execution time. Time is now spent up to 1.3 - 1.5 seconds. All texts are Russified.
Starline b9 has a number of innovations regarding multifunctional execution. Among them are: an improved interface for monitoring the operation and starting control of any motor; independent display of engine and interior temperatures; automatic switching on starting the motor on time; when the security mode is turned off, two-step unlocking of the motor; programmable interface for connecting security sensors (shock sensor, tilt sensor, pressure sensor, microwave sensor, ultrasonic sensor, etc.); selection of algorithms for activating the motor blocking outputs; independent indication of sensors; 4 additional control channels; a good method of programming the function on the LCD display of the back-link key fob.
The main differences from previous models:
If you associate with the models A9 and A8, which at one time became very popular, the Starline b9 alarm system is also equipped with a key fob that has a reverse link. So what is the advantage of this keychain? A special feature of the keychain is the presence of an LCD display with 44 independent icons on it. This is the highest figure. Starline b9 occupies a leading position among the systems with feedback. At the moment of receiving the return signal from the vehicle, the light indication turns on, which confirms the command execution. If the signals are accompanied by a vibration and sound alert on the key fob with the monitor backlight on, then this indicates an alarming situation.
Thus, with any impact on the car, the motorist will be notified just right. Car alarm key fobs of the "b" series are very comfortable to use. Convenience is achieved through the use of the "cursor" method of selecting the command mode. With its help, the alarm management process takes place. The owner of such an alarm now does not need to memorize a huge number of button compositions that had to be dialed to execute different commands.
Another difference between the latest alarm system from previous models is the presence in the design of StarLine NetTM interfaces. With their help, the installation of an alarm is greatly facilitated. Together with the Starline b9 alarm system, you can use various accessories for various purposes. And this makes it possible to use:
1.Motor blocking method with the introduction of digital relays. This makes it possible for a hidden alarm installation;
2. a method for transmitting control signals using GSM channels in the coverage area;
3. a method of tracking the location of the car using satellite communication channels GSM.
The central unit contains 7 relays. With the help of these relays, the embodiment of the control of the starter, ignition, door lock control, parking lights control, etc. is made. The body of the central unit has a reduced size. And at the same time, it has the highest functionality. All this contributes to the fact that it is secretly installed in the car. Specifically, the introduction of the latest software developments, the use of electrical components from the best global manufacturers and helps to ensure smooth operation starLine devices Twage b9. The presence of the certificate only confirms the compliance of the StarLine Twage b9 device with Russian and international standards.
An additional key fob that goes into the alarm set is waterproof and ergonomic. It contains a three-volt lithium cell. Specifically, the keychain is powered from it. Its work is designed for a period of more than 1.5 years. A special composition is applied to the buttons of the keychain, which shines in the darkness. Specifically, the increased brightness of the LED indicator makes the key fob more comfortable to use. The compositions of the commands on both keychains are 100% similar. This is for ease of use.
Car alarm StarLine Twage b9 is widely used on the territory of the Russian Federation, it fully complies with the requirements of regulatory acts of the Russian Federation. The service life is 5 years, provided that the installation and operation is carried out according to the annotation for the car alarm
The Starline B9 manual includes installation guidelines as well as the diagrams required to properly connect the alarm. This guide will be useful both for car service workers and for self-installation of the system in a garage.
[Hide]
Specifications
Car "signaling" Starline B9 has the function of automatic remote start engine, as well as alert and feedback options. This means the ability to remotely monitor the state of the main parameters of the car.
Properties possessed by the Starline security system:
- packet data transmission between the microprocessor module and the key fob is performed over a channel with a frequency of 433 MHz;
- the largest operating range of the communicator in the transmitter operating mode is six hundred meters;
- the range of the device when working as a pager is about 1200 m;
- the operating range of the spare key fob is approximately 15 meters;
- the system is completed with a sensitivity controller, which belongs to the category of piezoelectric;
- operating temperature range - from –40 to +85 degrees Celsius;
- to power the car alarm requires a voltage of 9 to 18 volts;
- when the protection mode is on, the current consumption of the system is no more than 15 mA.
Equipment
Description of parts and devices included in the delivery starline models B9 Twage:
- Microprocessor device that acts as a control unit.
- Application and installation manual. AT starline instructions B9 indicates all the nuances for correct installation and wire connections.
- Warranty card.
- The main communicator with a feedback option and a car owner notification function. Complete with a screen.
- Power supply for installation in the main pager. It allows the use of AAA batteries rated for 1.5 volts.
- Spare two-way communicator. Despite the lack of a screen, the device has a feedback function.
- Transceiver module designed to provide contact between the consoles and the control unit.
- Protective case for the main communicator.
- A set of wires with which the system installed on the car will be connected.
- Activation key service mode with a wire for connection.
- Customizable sensitivity controller.
- Temperature sensor designed to measure the temperature of the engine.
- Diode lamp for alarm status.
- Limit switch for bonnet installation.
The complete set of the alarm does not include a siren, therefore, it will be impossible to properly reproduce alarms, this device must be purchased separately.
Photo gallery
Photo of alarm elements:
Complete alarm set System control module Antenna adapter
Key features
When using the system, the security complex protects the following zones:
- Car motor wiring. For this, a special car alarm relay is used.
- Electric lines connected to the lock and other elements of the ignition system.
- Locks for doors, hood and luggage compartment. To do this, you need to install and connect limit switches. The kit includes only one switch for mounting on the hood. Luggage and door locks must be purchased separately.
- Hand brake lever. For this, a standard sensor is used.
- Salon. A sensitivity sensor is used.
The main protective functions of the alarm:
- car protection when the engine is running;
- automatic activation of protection when receiving signals from sensors;
- warning the user about turning on the security complex when using the communication channel with the control panel;
- job opportunity anti-theft system as an immobilizer;
- adjustable two-step disabling of the security mode;
- application of the service pin-code required to control and turn off the system in emergency mode;
- blocking the motor circuits and storing this information;
- preservation of engine blocking when power is cut off;
- silent activation of the protection mode;
- the option of silent protection, in which the activation of the alarm mode is not accompanied by signals from the siren;
- floating encoding characterized by increased protection in relation to scanners and code grabbers;
- a limited number of consecutive switching on according to information received from sensors;
- disabling the alarm mode without disabling the vehicle protection system.
For greater ease of use, the system has additional service options:
- turning on and off the security system by means of the service button, without using a key fob;
- restoration of the protective function when the security complex is turned off;
- programming of the main parameters and characteristics of sensors and door locks;
- control option additional blocking constipation in the doors when using the ignition lock;
- the use of additional four channels, which are required to control additional equipment and devices;
- car search function in the parking lot;
- the presence of blocking the buttons of the remote control, which allows you to prevent accidental pressing
- autostart of the engine and turbo timer;
- light indication of the reasons for activating the security function;
- sound notification of the car owner about the events that have occurred;
- the ability to identify malfunctions when turning on the security - alarm self-diagnosis function.
The consumer can expand the alarm functionality by installing additional GPS / GSM modules from the Starline manufacturer.
Satellite and mobile tracking devices will allow you to determine the coordinates of the car, which can be useful in case of theft. Additional modules are controlled using mobile communication. To do this, the appropriate software must be installed on the user's phone in advance.
The channel "AndreuAZTV" spoke in detail about the main capabilities of this car alarm model.
How to install it yourself?
Connection diagram for 18-pin connector
If the controllers are incorrectly connected, it will lead to false alarms.
Connection of 4-pin connectors of the shock sensor and additional sensor
To implement automatic start of the internal combustion engine (engine internal combustion) it is necessary to make the correct connection of the relay. The designation of all cables on the connector is shown on the map.
Connection diagram for 6-pin autostart connector
User's manual
The service documentation will allow you to perform the initial setting of the alarm parameters.
Control keychain
Before setting up the communicator, make sure that the alarm is set correctly. To do this, you need to try to close and open the doors.
Meaning of buttons
Designation of keys on the main and additional consoles
Description of the first key fob button:
- is used to activate the security function when the engine is turned off, for this the key is pressed briefly, for half a second;
- when the power unit is running, a short click on the button will block the engine;
- double clicking on this key will arm the system without sound;
- if you press the button twice, each for a few seconds, the system will enter the menu for changing the sensitivity and programming the shock sensor.
The second button is for performing the following options:
- a short press disables the security function;
- it is possible to deactivate the door lock if the alarm was activated with the engine running;
- long double press on the button will activate the silent protection mode;
- control of additional electrical equipment and devices;
- activation of the anti-robbery function;
- disable alarm mode.
Button number 3 is used to control the following options:
- A short press will display temperature information on the key fob screen. The display should also show data on the status of the anti-theft system.
- Double click will turn on standard function search for a vehicle in the parking lot. The key can be used to display information about the current temperature of the car engine.
- Adjustment of parameters of additional communication channel.
- Configuring the device with a cursor will allow using the button to change the operating parameters. You can change the timer for automatic motor start.
- The key is used to view the online time, alarm data and battery saving options in the remote. Using the button will control the vibration alert.
Display indicators
Indicators on the screen
Description of icons on the communicator display:
- The mode of automatic start of the motor by alarm is activated.
- Autostart of the engine by timer.
- Automatic start power unit according to the readings of the temperature sensor.
- Vehicle emergency service mode is on.
- Engine turbo timer activated or deactivated.
- Option to automatically activate protection mode.
- Motor lock mode is enabled or disabled.
- The key lock function on the key fob is activated.
- Battery charge indicator.
- Temperature level indicator in the car or engine.
- The anti-hijack mode has been launched.
- Icon in the form exhaust gases informs about engine operation.
- Additional equipment is connected in the form of a search and security module.
- Level 1 bypass indicator of the sensitivity controller.
- The icon to bypass the two levels of the shock controller.
- One of the open doors car, hood or luggage compartment.
- The current time.
- The alarm option is activated.
- Countdown timer included.
- The icon for defining the two-way communication between the antenna and the key fob.
- Open door indicator.
- Crossed out loudspeaker - Silent protection mode is on.
- Locked door locks icon.
- The emergency switching off the alarm with a password is active.
- Manual transmission mode activated.
Power supply of key fobs and replacement of batteries
Before using the communicator, the user must install working batteries in the device. The power supplies are installed in a special socket located behind the rear protective cover. To do this, you must first remove it. When installing, observe the polarity of the batteries.
Writing codes
You need to program a new key fob as follows:
- With the ignition off, the call button is pressed three times in the car emergency mode... If the installation of the alarm was carried out by specialists, you need to find this button or check it with them. For searching, you can view all the wires coming from the microprocessor module. A key is connected to one of them. It is usually located under the instrument cluster.
- Then the key in the ignition switch must be turned and set to the "On" position. The auto siren will beep, which indicates the entry into the programming menu of new remotes.
- The next step will be the binding itself. On the main remote control, the first and second buttons are pressed simultaneously. If the microprocessor module successfully binds the key fob, the siren will sound a beep.
- The same steps must be performed to bind the rest of the communicators. If they are programmed immediately, all devices must be prepared in advance. When binding, the interval between recording communicators should be no more than 5 seconds.
- Then the key in the lock is scrolled to the “Off” position. The headlights of the car should work several times, the security system will leave the keyfob binding menu.
User Leonid Akimtsev clearly showed how the binding procedure of the new Starline B9 signaling communicator is performed.
Programming security and service functions
Directly the function itself is configured by choosing one of four status options.
Setting options:
| Custom option | Short press on the 1st key | Short press on the 2nd button | Short "click" on the 3rd key | One long and short press on the 1st button |
| 1 pulse | 2 pulses | 3 pulses | 4 pulses | |
| Duration of door lock control signals | Option 1 | Option 2 | Option 3 | Option 4 |
| Mode automatic control door locks | Option 1 | Option 2 | Option 3 | Option 4 |
| Delay in turning on controllers when activating protection | 60 seconds | 5 second | 30 seconds | 45 seconds |
| Automatic activation of protection, as well as an algorithm for processing pulses of an additional controller | With the door locks closed | With the door locks closed | Without closing the door locks | Without closing the door locks |
| Two-level additional controller | Single level additional regulator | |||
| Switching protection mode in automatic mode | With the door locks closed | Without closing the locks | Off | Off |
| Algorithm and duration of the audio output | On siren 100 ms | Siren 50 ms | On the steering horn 50 ms | On the steering horn 20 ms |
| Light indication of open doors | 10 Seconds | 20 seconds | 30 seconds | Off |
| Configuring the operation of blocking pins when the anti-robbery function is activated | When the brake pedal is activated | When the alarm mode is activated | Off | Off |
| Anti-theft emergency shutdown function | No password | Unambiguous password | Two-digit password | Three-digit password |
| Enabling the outputs to block the power unit | Off | Activated | Activated | Activated |
| Algorithm of the fourth additional channel, blue cable | Option 1 | Option 1 | Option 2 | Option 2 |
| Algorithm of the first additional channel, black and yellow contact | Option 1 | Option 2 | Option 3 | Option 4 |
| Algorithm of the second additional channel, red-yellow contact | Option 1 | Option 2 | Option 3 | Option 4 |
| Algorithm of the third additional channel, white-yellow contact | Option 1 | Option 2 | Option 3 | Option 4 |
Anti-theft functions
Features of setting anti-theft options:
- To turn on the engine blocking, you need to press and hold the third button of the remote control. The remote control should emit first a long and then a short beep. By short pressing on the third key, the Auto Immo option is set. After selecting a function, the first button is pressed. To disable this mode, use the key number 2.
- To activate the anti-robbery function, the ignition must be turned on, turning on is done by holding the first and second buttons. If the option is enabled, the alarm will emit a sound signal. The blocking of the power unit will occur when the brake is pressed or other events programmed earlier. To turn off this mode, button 2 is pressed twice with an interval of two seconds.
- Passive activation of the anti-robbery mode is carried out in three stages. On the first one, you need to enable the standby option, for this, when the ignition is activated, the emergency button "Jack" is pressed once. Then, by opening the door, you can see that the diode lamp will begin to blink frequently, and when they are closed, preparation for the implementation of the option will take place. At the third stage, the anti-robbery function is activated after 30 seconds.
Engine starting
Before performing the task, the vehicle must be prepared by setting the program neutral option if the vehicle is equipped with a manual transmission ( mechanical box gear shift):
- The machine with the running power unit stops, the transmission selector is set to the neutral speed position. You also need to pull the hand brake lever.
- Then the ignition is turned off in the car. The key is removed from the lock, the motor must remain in working order.
- The driver gets out of the car and locks all the doors with the key. The machine is prepared for the autostart option.
Feature Features
When setting up an option, you need to consider the following nuances:
- The type of transmission, power unit must be pre-configured.
- Autostart of the engine will be impossible with the ignition on, open engine compartmentdisabled hand brakethe brake pedal is depressed.
- During one cycle, the alarm can make a maximum of four attempts to start the motor. If the engine fails to start, the user will be alerted by receiving a message to the two-way console. The car headlights will blink four times.
- The time of the first rotation of the starter mechanism is user-configurable. It can be from 0.8 to 3.6 seconds. With each subsequent attempt to start, the alarm will automatically increase the cranking time of the starter mechanism by 0.2 sec.
- If the engine, after a successful start, turns off automatically for no reason, the anti-theft system will make an early attempt to start it.
Remote start
To start the power unit of the car on command, the first and third buttons of the communicator are used. Pressing button 1 should be longer, and pressing button 3 - short. If, after these manipulations, the engine starts, then the headlights of the car will flash three times, and the key fob will reproduce one signal. To disable this function, similar actions are performed, only instead of the first button, the second key is pressed. When the engine stops, the lighting devices should work 4 times, and the indicator in the form of smoke from the muffler disappears from the communicator display.
Powertrain remote start options:
- the ability to activate this function by a command sent by the user from the remote control;
- extending the operating time of the power unit from the communicator;
- car engine start by temperature environment, after a certain time interval or at a time set by the user;
- the ability to control the operation of the car engine according to the readings of the tachometer or the voltage level controller in the vehicle's on-board network;
- disconnection of the starter device after a successful start of the power unit;
- notifying the user about how much time is left for the engine to work, for this, the indication system on the key fob display is used.
User Stanislav Tarasov told about the autorun function, as well as the implementation of other options.
Autostart
Automatic start of the internal combustion engine can be carried out according to three parameters:
- at the specified time;
- by timer;
- according to the air temperature.
By alarm clock
The option is configured as follows:
- To activate the function, you first need to make sure that the time parameters are set correctly. Alarm readings change if necessary. Enabling this option will be indicated by a bell-shaped indicator on the display.
- If the current time is set correctly, then the first and second keys on the communicator are pressed. The cursor on the device screen will move to the indicator in the form of a clock. This option is enabled.
- To disable the function later, the cursor on the screen is moved to the position of the clock icon. The second key is used to disable.
By timer
The timer can be configured to operate every 2, 3, 4 or 24 hours, for setting this parameter the first and third buttons are used:
- On the key fob display, the cursor must be moved to the position of the timer indicator, then activate the function.
- The remote control will emit a melodic signal, the car will be triggered once. The corresponding indicator on the communicator screen will light up, indicating that the function has been activated.
- To disable the option, the cursor is positioned in a similar position on the screen and the second button of the remote control is pressed.
By temperature
The following steps are taken to configure:
- The function is activated by moving the cursor to the thermometer-shaped icon on the remote control. The buttons enable the option. parking lights the car will blink once, an indicator with the temperature level at which the engine will start will appear on the screen.
- The second key of the communicator is pressed. The side lights of the vehicle will blink.
Programming engine start parameters
A detailed description of the settings for implementing this function:
| Programmable function | Single press on key 1 | Single "click" on the second button | Short press on key 3 | Long and short-term "click" on button 1 |
| 1 pulse | 2 pulses | 3 pulses | 4 pulses | |
| The duration of the turbo timer of the power unit | Turned off | 1 min | 3 min | 6 minutes |
| The duration of the car motor after remote start | 10 minutes | 20 minutes | 30 minutes | Time limit disabled |
| Time intervals for periodic engine start by timer | 2 h | 3 h | 4 h | 24 h |
| Remote start of the motor by ambient temperature | -5 degrees | -10 degrees | -20 degrees | -30 degrees |
| Remote motor start option | With the inclusion of protection and closing the door locks | Without arming and locking the doors | Without activating the protection and door closing function | |
| Exit work algorithm | Duplication additional devices and devices 2 seconds before turning on the ignition | Duplicate ignition | Duplicate starter device | One signal |
| Duration of cranking the starter device | 0.8 sec | 1.2 sec | 2 sec | 3.6 sec |
| Car engine type | Gasoline with a two second delay | Diesel, the delay is 5 seconds | Diesel fuel with a 10 second delay | Diesel, delay 20 sec |
| Engine operation control by settings | Voltage | Generator, its positive contact | On the negative contact of the generator device | Tachometer |
| Activation of the ignition support function when the engine is running | Automatically | On command from the key fob | Turning on the hand brake lever | Turned off |
| Turning off the ignition output when cranking the starter | Included | Included | Included | Included |
Download instruction for installation and operation of Starline B9 car alarm in PDF format
You can download service manuals from the links:
Advantages and disadvantages of the system
The main advantages of the alarm:
- Cost. This model, judging by the reviews, it is a good option in terms of the ratio of low price and extensive functionality.
- Reliability. Due to the numerous locks, in the event of a burglary of the alarm system, movement by car will be impossible.
- Ease of use. The service manual indicates all the nuances regarding the adjustment of the basic parameters and the initial setting.
- Automatic engine start option.
- Possibility additional connection Starline GPS / GSM modules.
- Long range of the key fob, despite the presence of interference on the ground.
Cons that consumers highlight in their reviews:
- The main communicator becomes less sensitive with prolonged use. The consumer will have to press the buttons several times when controlling the functions.
- Clock or alarm settings can be automatically reset without user intervention.
- The main communicator may freeze during operation. This problem usually requires replacement of power supplies.
- Low time range of the starter when starting the engine. Because of this, at negative temperatures, problems may arise with the start of the motor.
How much does Starline B9 alarm cost?
Alarm purchase price table:
Video "Visual configuration of car alarms"
User Timofey Shvets clearly showed how the Starline B9 anti-theft system is configured and how to properly manage it after installation.
A set of security measures to protect the car is provided different systems, one of which is the Starline B9 car alarm. The complex not only protects the vehicle, but also gives the driver confidence that everything is in order with the car. The Starline B9 alarm system provides full information about the condition of the vehicle, which allows the owner to remain calm during long absences.
Alarm features
Security complex "Starline B9" exercises control over several zones at once:
- The hood, doors and trunk of the car are controlled by limit switches.
- Wheels, body and windows - a two-level shock sensor.
- Digital and conventional relays - engine start.
- Car ignition by means of voltage sensor.
- Parking brake - limit pushbutton switch.
Selection and interception of the system code is impossible due to the original dialog control code and the "friend or foe" coding algorithm. The initial state of the Starline B9 alarm is preserved in the event of a shutdown and is restored when the power returns. The engine blocking remains unchanged when the external power supply is turned off if the vehicle is armed at the moment of shutdown. Alarm cycles from sensors are limited. It is possible to interrupt alarms without disarming the vehicle.
Anti-theft and protective functions
According to the instructions, the Starline B9 alarm system is equipped with a rich set of functions, which include programmed activation of the power unit depending on temperature and time. As well as remote engine start.
The Starline B9 alarm system is equipped with the following functions:
- Turning on the alarm when activating sensors in the armed mode. A signal and alarm notification is sent to the feedback panel.
- Automatic blocking of the car engine when the immobilizer mode is on, 30 seconds after the ignition is turned off, regardless of which security mode is activated.
- Depending on the programming in the anti-robbery mode, the following occurs: engine blocking, automatic door locks closing in impulse mode for the first 30 seconds, then on an ongoing basis.
- Turbo timer mode for turbocharged vehicles. Keeps the engine running after turning off the ignition until the turbine stops completely. When the security system is simultaneously activated, the system temporarily blocks the ignition inputs and turns off the shock sensor, bypassing the engine. Arming is carried out after disabling this mode.
- Deactivation of the security mode can be carried out without a key fob by dialing a personal code or other functions. In both cases, the service button is used to disarm the vehicle.
- The personal emergency shutdown code is programmable and includes up to three digits.
- When disconnected from the connectors of the central alarm unit "Starline B9", the car remains protected, and the engine is not unlocked.
System service functions
In the Starline B9 alarm system, a number of service functions: silent protection, security mode with running engine, panic mode, silent activation and deactivation of functions, vehicle search and work with GPS / GSM modules. The system automatically diagnoses the condition of the sensors, bypasses the fault zones and issues a full report. There are several ways to start the engine: remote using a key fob, turning on by timer, alarm or temperature. You can program the system depending on the characteristics of the vehicle - the presence of an automatic or manual gearbox, a different type of power unit.
Alarm set
Security system "Starline" is supplied in the following configuration:
- Set for B9 ": central unit, antenna with transceiver module, temperature sensor, driver call button, cable set.
- Two-level shock sensor. It captures strong and weak impacts, to which the system reacts with a series of short sound signals or by activating a full alarm.
- Temperature sensor for the motor.
- Remote controls - a three-button key fob without a screen and feedback functions and a key fob with an LCD screen and feedback.
- Operating instructions "Starline B9".
- A car-mounted LED that serves as an indicator of the operating mode.
- Emergency switch is a button that is installed in the car in such a way that it has free access, but at the same time its location is hidden.
- Installation and operation documentation - instructions for "Starline B9", warranty card, service papers.
Remote control key fobs
The car alarm kit includes two key fobs - the main and the auxiliary. The first is equipped with an LCD screen and three keys, coupled with a feedback function. The current state of the car alarm is displayed on the key fob display by means of clear pictograms. System programming, according to the instructions for "Starline B9", is carried out by means of a key fob. The key fob display shows information such as the temperature of the vehicle interior and engine, additional parameters. The battery is a 1.5-volt AAA battery. Its charge is enough for 6-9 months of use of the key fob, depending on the intensity and frequency of use.
Keyfob key assignment
On both remote controls, the button assignment is the same:
- Key 1. Activates security mode, locks locks, controls shock sensor levels.
- Key 2. Disables the security mode, unlocks the locks, disables the alarm signal. Controls an additional sensor and anti-robbery mode.
- Key 3. Activates the temperature indication mode, fixes the alarm state, turns on an additional channel and cursor selection of functions.
Benefits of the Starline B9 alarm
The presented car alarm model takes one of the highest positions among similar security systems. The scope of application of the alarm system is significantly expanded due to the possibility of connecting additional modules - ultrasonic, microwave sensors, pressure and tilt sensors. The system itself is built on a relay type, so that the complex can be installed anywhere in the car. Starline DRRTM radio relay provides blocking of machine components.
The central alarm unit consists of 7 relays that control electric locks doors, ignition, starter, light and sound, and other equipment. A feature of the Starline signaling system is the ability to remotely control the system via GSM channels in their coverage area. Simply put, manage security complex you can use a regular phone. To use this function, a GSM module must be installed. The device is equipped with three additional equipment inputs. When the sensors are triggered, a call or SMS message is sent to the phone, notifying the car owner of the incident.
Car alarm "Starline B9" is installed on vehicles from onboard voltage network 12 V. According to the instructions for "Starline B9", it is desirable to place the central control unit in hard to reach place... In most cases, the block is placed under dashboard.
On windshield attach the antenna and the transmitter module, which guarantees the maximum range of the latter. The sensor for measuring the temperature in the car interior is located in the module, and therefore its location should be carefully considered. It is advisable to locate the devices in such a way that they are not exposed to direct sunlight, heating systems and other heat sources.
It is also advisable to place the shock sensor in the passenger compartment, since it requires regular and convenient access for adjustment. In this case, it must be firmly attached to the body. The temperature sensor is attached to the engine or to its metal parts. Automatic engine start only works correctly with accurate temperature measurement.
The Valet service button is located in a hidden, but accessible place for the driver. Do not place it in places that are not easily accessible, as the button is usually required in emergency situations. Valet mode is activated mainly when the car is sent to a service station for repair. In this mode, part of the alarm functions is disabled, so that there is no need to give key fobs from the system to the service center employees.
Car alarm Starline b9 is designed to provide a set of measures for car security. It not only protects the car from being stolen by robbers, but also allows the driver to be sure that everything will be in order with it. That is why he is not worried about its safety, which has a positive effect on his emotional state.
System features
Several security zones are under the control of the alarm:
- car trunk, doors, hood for opening - push-button limit switches;
- body, wheels, windows on mechanical stress - two-level shock sensor;
- engine from starting - digital radio relays Starline DDR, conventional relays;
- ignition from inclusion - there is a voltage control sensor;
- parking brake from switching off - push-button limit switch.
The security of the signaling is ensured by the original dialog control code, a special coding algorithm "friend or foe" is used, which protects against selection and interception. To exclude the possibility of a power reset, the system remembers the initial state when the power is turned off and returns back when restored. When the external power supply is disconnected, the engine remains blocked if the system was in the armed state. Sensor alarm cycles are limited. Interruption of alarms becomes possible even without disarming the car.
Protective and anti-theft functions
The alarm also has a number of useful service functions: starting the engine from the remote control, programmable activation of the motor depending on time and temperature. Consider the most important functions devices:
- if the sensors are triggered in the armed mode, alarms are triggered. In this case, a signal is sent to the panel with an alarm notification feedback;
- when the immobilizer mode is on, the engine will be blocked automatically after the ignition is turned off after 30 seconds, regardless of the state of the security mode;
- when the anti-robbery mode is turned on, depending on the programming, the following occurs: automatic locking of the door locks, blocking the engine, for the initial 30 seconds in a pulse mode, then continuously;
- for turbocharged cars, a turbo timer mode is provided, it maintains the operation of the car engine after the ignition is turned off for the time required before the turbine stops. If during its operation the car is armed, the system will disconnect the ignition inputs and the shock sensor during operation, the engine will not be blocked. The system will fully arm the car after the mode has been completed;
- the ability to program the disarming without a key fob. Either with a set of a personal code, or not (programmable functions). To disarm the vehicle in both cases, the service button is used;
- the ability to program an individual emergency shutdown code up to three significant digits;
- if the engine blocking is enabled (the system is armed), it will remain blocked even if the central alarm unit is detected and disconnected from the alarm connectors.
Service functions
The car security system has a number of service functions. Among them are: security mode with the engine not turned off, silent protection, silent activation of functions, panic mode, work with the GSM / GPS module, vehicle search. The alarm automatically monitors the sensors, bypasses the fault zones and reports it. The device implements the functions of activating the engine: from the remote control - remote start, automatic switching on by timer every 2, 3, 4, 24 hours, by temperature, alarm clock. The settings for the features of working with automatic and manual box gear, different types engines (gasoline, diesel).
Contents of delivery
The security alarm delivery set includes:
- complete installation kit, including central control unit, antenna with transceiver module, driver call button and interior temperature sensor, cable set;
- a two-level shock sensor, distinguishes between weak and strong shocks, while the alarm reacts with a short series of sound signals or triggers a complete alarm;
- temperature sensor for the engine;
- remote control panels:
1) With liquid crystal display and feedback.
2) No feedback, three-button key fob without display.
- the LED installed in the car indicates the operating modes;
- a remote emergency switch is a button that should be installed in the car so that sufficient secrecy of its location and ease of use are ensured;
- complete documentation for installation and management.
Remote controls
The burglar alarm set includes two key fobs: main and auxiliary. The main key fob resembles a small transmitter with three control buttons and an LCD display screen. The keychain has feedback. The keyfob indicator displays the current state security system, intuitive pictograms. The keyfob is used to program the security system. In addition to the main purpose, the key fob displays the current time, and some additional parameters: temperature in the car, engine temperature. The keychain is powered by a 1.5-volt AAA battery, depending on the intensity of use, it lasts from six months to 9 months.
The second keychain has no feedback. The keyfob buttons have the same set of functions as the main one. There is an LED indication of its work. The key fob does not support the coding algorithm, so it is advisable to use the basic version. The key fob is powered by a 3-volt battery, depending on the intensity of use, it lasts for 9-12 months. If the car is used by several people, it is advisable to purchase additional key fobs with feedback.
Keyfob buttons
The purpose of the buttons on the key fobs is the same:
- button 1 - turning on the security mode, locking the locks, controlling the shock sensor by levels;
- button 2 - disarming, unlocking, interrupting alarms. It is also responsible for turning off the "anti-robbery" mode, controlling an additional sensor;
- button 3 - activation of the "temperature indication" mode and detection of the alarm state, activation of an additional channel, activation of the cursor selection of functions.
Signaling benefits
The presented device occupies a worthy place among automotive security systems with feedback. The alarm provides the ability to connect additional devices (tilt, pressure, microwave, ultrasonic sensors), which significantly expands the scope of its application. The device circuit is built according to the relay type. This allows you to freely install the alarm anywhere in the car, which increases security. In this case, blocking is carried out by means of the Starline DRRTM radio relay.
There are 7 control relays in the main unit. They control the starter, ignition, electric door locks, sound and light guidance and other equipment. Another feature of the signaling is the ability to control it using GSM channels in their coverage area. That is, it is possible to control the alarm from a conventional cell phone. In order to use this feature, it is necessary to install an additional GSM-module Starline Messenger. The module has three control inputs additional equipment... When sensors or alarms are triggered, an SMS or call comes to the phone.
The alarm system is designed to be installed on a vehicle with an on-board voltage of 12 V. It is preferable to install the central unit in an inaccessible place. Usually located under the dashboard, shorter cable lengths and appropriate routing.
Antenna with transmitter module for windshield. This will ensure the maximum range of the transmitters. The cabin temperature meter is located in the same module, so the location of the module should be taken into account. In this case, it is advisable to avoid heating from car stove, direct sunlight and other heat sources.
The shock sensor is also recommended to be located in the passenger compartment; it needs periodic access for timely adjustment. The sensor must be rigidly fixed to the housing. The motor temperature sensor is attached to the motor housing or adjacent metal parts. It is important for the automatic engine start to have the correct temperature value.
The Valet service button should be installed in a hidden but accessible location. It may be required in emergency cases, therefore, it is advisable not to place it in places where there is no quick access. When submitting a car to a service station for repair, it is recommended to turn on the Valet mode. In this case, some of the alarm functions are disabled, so there is no need to hand over the security system key fobs to the repairers.
Well no
StarLine B9 - two-way car alarm and smart launch engine. The alarm is completed with a handy key fob with a user-friendly LCD display. The key fob has a warning range of up to 1.2 km. The protection of StarLine B9 from intellectual hacking is ensured by the use of the dynamic code of the radio control StarLineProPlusTM, which is protected from selection and interception by the dialogue "friend or foe" coding algorithm. The process of remote start and control of the operation of an engine of any type is provided by a specialized processor. The StarLine B9 system can be installed on any cars with gasoline, diesel or turbocharged engines, with an automatic or manual transmission. More than 60 standard and programmable functions provide the car owner not only reliable protection, but also the comfort when using the car starLine alarm AT 9.
Features: StarLine Twage B9
- Reversible key fob with LCD display with the ability to display events in real time
- The maximum range of the remote control in transmitter mode is 600m (declared by the manufacturer)
- The maximum range of the remote control in pager mode 1200m (declared by the manufacturer)
- Dynamic control code, protected from selection and interception by dialog coding algorithm "friend or foe"
- Remote and automatic start engine
- Automatic control of finding the key fob in the reception area
- 9 protected areas of the car
- Turbotimer mode
- Ability to work with security and search GSM / GPS module StarLine Space
- 4 additional control channels
StarLine Twage B9 complete set
| 1. Remote control key fob with LCD display and feedback | 1 PC. |
| 2. Remote control key fob without feedback | 1 PC. |
| 3. Central processing unit | 1 PC. |
| 4. Transceiver module with antenna, emergency call button and temperature sensor in the car | 1 PC. |
| 5. Engine temperature sensor | 1 PC. |
| 6. Two-level shock sensor | 1 PC. |
| 7. LED indicator | 1 PC. |
| 8. Valet service button | 1 PC. |
| 9. Bonnet button | 1 PC. |
| 10. Set of cables | 1 PC. |
| 11. User's Memo | 1 PC. |
| 12. Operating and installation instructions | 1 PC. |
