After purchasing a car VW brand of any model, many auto pests are lost, because they are not sure which oil is better to pour into Volkswagen, the conductions are necessary so that it meets all the recommendations and was suitable. Today Volkswagen occupies a leading position among world car manufacturers. The main advantage of vehicles from this concern is a modern, very reliable motor.
Since Volkswagen is produced in Germany, most owners believe that the oil must be definitely German. This is not entirely true. European lubricants are also distinguished by high quality, they are reliable and protect the engine from all sorts of cataclysms.
Types of oil for Volkswagen
The main requirement for any oil for Volkswagen is the presence of special additives As part. These requirements fully satisfy the products of Mobil.
Mobile products can be used in any german car, regardless of the type of fuel. I must say that Mobil manufactures cars that recommends using the Volkswagen manufacturer. For example, today you can purchase formulations for concrete Markam cars Volkswagen Golf., Volkswagen Polo..
Mobil 5W-30
Oxol VW 504 00 was specially made for operation in gasoline engines. For diesel, another standard is suitable - VW 507 00.
Mobil 1 0W-40
For gasoline motor It is necessary to apply the standard value of VW 502 00. The VW 505 00 oil is poured into the diesel.
Permitted tolerances
Manufacturers usually make several engine oils to all engine oils additional requirements. Did not exception and concern Volkswagen.. The lubricant package indicates a certain admission. Its value characterizes a specific quality standard that determines the product indicators that must be present in the lubricant for a specific type of car.
To obtain tolerance, products are subjected to the certification procedure that the manufacturer of cars performs. For lubricating fluid to receive tolerance, it is subjected to numerous tests in the laboratory.
You can learn VW oil tolerance on the manufacturer's portal or service book Automatic.
Tolerances Volkswagen.
Today, valid tolerances VW are:
500.00. Oil is distinguished by the all-season energy saving ability. It can be used in any type of engine, regardless of the type of fuel.
501.01. Designed for power plantsequipped with direct injection.
502.00. For gasoline unit.
503.01. It is used in engines with an increased replacement period.
504.00. Used in diesel power units with a large service period. Can be applied in mechanisms equipped summer filter.
505.00. Can be operated in passenger carsequipped diesel aggregate, as well as in turbocharge systems.
505.01. For diesel engines having a pump in the form of a nozzle.
506.00. Designed for fill in diesel enginehaving turbocharging.
506.01. Differs from all previously enlarged intersavice period.
507.00. This tolerance included all the characteristics of the above-described oils. Such a product can be operated in diesel installations.
To pour into the Volkswagen engine oil, you must guide the recommendations from the car manufacturer. If using others lubricating fluidsThe engine can quickly fail.
Volkswagen Polo is the most-selling Volkswagen brand car in Russia. High demand for this model due to high quality manufacturing, worthy comfort and optimal power parameters. To keep the car in good condition, it is necessary for this only qualified maintenance using original materials. One of the most important procedures Services - Replacing the oil in the engine. But before this it is necessary to choose the right oil. How to do this, consider in detail in the article.
- Mineral oil - high viscosity fluid. Such a product is used mainly in old carburetor motors.
- Synthetic oil is the complete opposition of "mineral milk". Such oil has a minimal viscosity coefficient. It is noticeably faster distributed over all components of the engine, and practically does not lose its lubricating properties even at the most extreme temperatures
- A semi-synthetic oil is a universal version consisting of 50% of pure synthetics, and the remaining 50% is the mineral component. Semi-synthetic - more affordable alternative synthetic oil. Ideal for Volkswagen Polo.
The choice of a suitable lubricant is an important task to which it is necessary to approach with extreme caution. The fact is that there are many manufacturers on the market producing products of dubious quality. Of course, everyone wants to save on consumable materialbut at that moment a person forgets which consequences can be up to overhaul Engine. It is extremely recommended to change often different manufacturers Oils, as it will negatively affect the efficiency of the motor. The most reliable option is to use oil approved company Volkswagen.used from the very beginning volkswagen exploitation Polo.
Pay attention to four classes of engine oils suitable for the model under consideration:
- VW 501 01.
- VW 502 00.
- VW 503 00.
- VW 504 00.
These classes correspond aCEA standards A2 or ACEA A3
Child Nuances
On packing S. high-quality oil There must be marked with the manufacturer's country. Naturally, it must be Germany. The most common fakes - Romanian and chinese production. In addition, counterfeit can produce in Russia. If the owner of the VW Polo for some reason does not want to use the original factory product, then you can recommend Shell Helix. Ultra or Mobil 1. These oils often advise the owners of German cars. The engine with such an oil will work smoothly and without interruptions, and without the need for a toll. Problems using Shell Helix Ultra and Mobil 1 will not arise. The main thing is that the label is specified by the appropriate level of viscosity. For Volkswagen Polo This is a 5W30 standard.
Among other nuances - the choice of a suitable canister. For Volkswagen Polo on the market there are oils with a capacity of 1, 4 and 5 liters. Most optimal option For the price - the canister for 4 liters. In extreme cases, a five-liter bottle is suitable. The fact is that over time the car will consume more oil, and additional topping may be required.
How much to pour oils in Volkswagen Polo
Replacement frequency
Motor oil in Volkswagen Polo must be changed usually every 15 thousand km. This is the recommendation of dealers, but in practice the situation may be different. For example, with constant traffic jams, long interruptions and in conditions of polluted air, the oil is better to change every 8 thousand km.
VOLKSWAGEN POLO oil replacement cost
Volkswagen dealer centers provide oil replacement services. The cost of the service is approximately 500 rubles, which is incommensurable cheaper compared to the purchase oil filter, washing fluid or the same oil.
This car brand is distinguished by special reliability.
Many motorists, purchasing a Volkswagen car, do not at all know which oil is needed for this brand. Volkswagen is considered practical perfect car. The main dignity is surprisingly perfect and trouble-free motor.
In order for the engine correctly worked in conditions domestic roads, it is necessary to care for him. One of the requirements is to acquire additives to fuel recommended for this car. There is a market on the market huge range Mobil products, which meets the needs of its motor.
Motor lubricants of this brand can be used both in gasoline and diesel engines. In addition, Mobil produces products recommended for use in Volkswagen cars. For example, there are oils created specifically for volkswagen models Golf and Volkswagen Polo.
Mobil Lubrication Types
Synthetic motor additives Mobil, approved by Volkswagen, are divided into several types:
- Mobil 5W-30. For gasoline engines, it is recommended to use an oxole standard VW 504 00. If the motor operates on a diesel engine, the product of the VW 507 00 standard is suitable.
- Mobil 1 0W-40. In the presence of gasoline engine The lubricant material of the VW 502 00 standard is applied. And for diesel cars Used oil standard VW 505 00.
It does not matter which model car Volkswagen. You own: Large VW Passat with the Body "Universal" or a small VW Beetle. The assortment of Mobil oils is huge and you always have something to choose from. To pick up suitable lubricantYou can consult with experts. And you can independently understand the types lubricants.
How to check how much lubrication remains?
With this chip, you can check the oil level At the factory-producer in the car poured all-season oil high Quality. Data on it can be viewed in the instruction manual. Over time, any lubricant loses its characteristics and becomes thick. To avoid damage to the parts of the motor and change the oil on time, look at the service book and read the intersavice intervals.
The lubrication consumption in any car depends on the operating conditions and driving. Therefore, you should not wait for a certain period before looking under your car hood and determine the level of oxol. You can make such an inspection before each fair travel Or during the fuel refueling.
On the VW car instrument panel there is a light bulb that serves as an indicator of the lubrication level in the engine. When it lights up, it is worth checking the oil level and add the appropriate product.
- Before checking the level, you need to wait a few minutes to give engine oil to the pallet. The car should be installed on the horizontal surface, it will help to avoid inaccurate measurement.
- To check the level in VW motor, the probe is used. To see how much lubricant remains in the engine of your car, it is enough to remove the dipstick and look at the mark.
- The level should not be both lower and above normal. In the second case, you can damage the catalytic neutralizer.
If, after committing these actions, the bulb did not go out, it is recommended to contact the service center to those skilled in the art.
Tolerances - what are they needed for?
Popular oil among Foltsage owners In addition to the requirements for motor oils put forward by all manufacturers, the Volkswagen concern also presents additional. Such tolerances are indicated on the product container. Manufacturer tolerance is a specific quality standard that settings must be determined. this product When using it in engines of a car brand in engines. In order for the manufacturer of motor lubrication to write a certain tolerance on the packaging of his product, the products must pass the certification procedure from the manufacturer of machines. To assign a certain tolerance, the oil passes many laboratory analyzes. Mask tolerances It is for your car that can be found in the car service book, as well as on the manufacturer's website.
There are the following tolerances from Volkswagen:
- 500.00 - All-season energy-saving lubricant, suitable for engines both diesel and gasoline type;
- 501.01 - for motors that use direct injection;
- 502.00 - the product intended only for gasoline engines;
- 503.01 - for motors with an enlarged service interval;
- 504.00 - products that are designed specifically for diesel engines with an increased service life, as well as for mechanisms having a diesel filter;
- 505.00 - for diesel engines passenger carscan be used in constructions that have turbocharging;
- 505.01 - lubricant, which is suitable for diesel engines with pump pump;
- 506.00 - for turbocharged diesel engines and increased service life;
- 506.01 - from the previous type differs only by the fact that it has an increased service interval;
- 507.00 - includes the properties of the above-described oils, it can be used in diesel engines.
In the motor, you can only pour the product that is recommended by the VW manufacturer. Applying other lubricants of other certification, the unit can be output. To avoid unpleasant consequences, bring a liter canister with the necessary butter.
Volkswagen Polo Cars Sedan, equipped different modifications Engine, which differ in characteristics and designs. The most popular motor is in line 4 cylinder, 16 valve 105 strong motor, 1.6 liter volume, and
gasoline injection. The force aggregate Very referring to the quality of the applied lubrication.
Car enthusiasts are often wondering what oil is to fill in Volkswagen polo sedan 1,6 gasoline? AT technical manual to this car Recommend to use oils:
- 5W-30. ;
- 5W-40 ;
- 10W-60 ;
- 10W-40 .
In the production of Volkswagen polo, the engine is poured motor oil Shell Helix Ultra Extra 5W-30, which is recommended to replace at that car.
This oil, almost the most technological and perfect, in the line of oils of the brand Shell. The viscosity class of 5W30 oil is primarily designed to reduce the losses in the friction of parts, as well as a decrease in gasoline consumption.
Oil viscosity, it is its ability to linger on the parts of the engine, and at the same time remain with a certain fluidity.
In addition, this oil has a modern tolerance, which is suitable for most loaded motors, including turbines.
However, another factor is influenced by a brand of replaceable oil, namely the presence of a catalyst or a sump filter. If the machine is equipped with a sump filter, then you need to use oil with a tolerance not lower than 507, with a catalyst installed, you can use oil with a tolerance 505. Oil tolerance data for engines can be found on the canister label with butter.
Which oil to pour into the engine Volkswagen polo sedan 1,6 gasolineThis is to solve each car owner individually, but you should know some moments. If, for example, take the oil 5W-30, the first part before the dash 5w is low-temperature viscosity. It means that the cold car launches can be made to -35 degrees (from the figure located in front of the letter "W" must be between 40). This temperature is minimal for this oil at which it will be able to pump it. oil pump, without dry friction. Upon torn, everything from the same figure 35, it turns out the number -30, which indicates the minimum temperature at which the engine can be checked.
If the car is planned to be operated in the region, where in the winter the temperature does not fall below -20 degrees, you can choose an oil with a salvage in the beginning of the oil marking. The second number in the marking of the oil, it is difficult to explain to simple terms, this is a set of testimony of maximum and minimal viscosity, in the operating range of the motor temperatures, it is worth knowing only one than the output of the output, the greater the viscosity of the oil in the heated motor.
Volkswagen cars are considered the most unpretentious in the matter of selection of lubricants. As a rule, a relatively large range of oil compositions of various manufacturers may be suitable for vehicles of this brand. Often, when the car enthusiasts arise about what engine oil must be used in a particular situation, manufacturers advise only the original lubricating composition.
It is worth noting that the manufacturer of Volkswagen car manufacturer does not produce lubricating compounds. This is engaged in another company, in front of which, however, the manufacturer of vehicles establishes its requirements regarding end result. Therefore, fluids made in compliance with the requirements of the manufacturer are considered original oils.
The concept of the original oil occurred from the English name Original Equipment Manufacturer, which means original production. The oil producing companies can both buy and make basic lubricating fluids themselves, as well as special additives to them. In general, such compositions are required to comply with the requirements. car brandsto be called original products.
Almost for any vehicles of the Volkswagen brand, it is customary to be the original oil fluid Castrol Edge Professional Longlife III. This composition is poured into car engines at factory assembly, as well as, with the first maintenance, they also produce topping up to the desired level. If the car is later used on the coatings good quality In a medium with a moderate climate, then this option of lubrication will be quite by the way.
Climate change in which is operated vehicleIt will be sure to change the change of lubricant on the non-original composition. In this case, it is necessary to make a difficult choice and decide which oil is suitable for this region.
In order to make the right choice worth paying attention to some characteristics oil fluids:
- Viscosity indicator;
- The presence of all necessary for proper work Engine additives;
- The frequency with which the oil needs to be replaced;
- The correct operation of the filter on certain varieties of liquids.
If we talk about the frequency of replacement of non-original oils, then opinions are ambiguous. At the same time, it can be argued with the share of confidence that non-original compounds will have to replace a slightly more often factory liquids. Original oil Volkswagen gives a guarantee for mileage up to 15 thousand kilometers. Some other types of oils can shorten this gap almost three times.
Varieties of additives and tolerances
Now you should mention additives. It can be calcium, phosphorus, zinc and other substances that contribute to the extension of the operational engine. However, at the moment, not too much oil liquids can boast the presence of a sufficient number of additives. One of these species is mobil oil 1, moreover, Volkswagen is not at all against the use of liquid data in its motors.
The brand resolution on the use of any types of products during servicing its cars is called tolerance. Such lubricants are great for warranty service Auto. For example, famous marks motor lubricants Total Quartz Ineo MC3, having a viscosity of 5W30 and 5W40, there is official approval from Volkswagen, so they can easily be applied during the guarantee service. In this case, VW is one of the VOLKSWAZ motor tolerance marking.
