How much oil is in a Toyota Corolla 1.6 engine. Engine oil for Toyota Corolla: selection and replacement

History lineup Corolla dates back to 1966, when the compact novelty from Toyota first rolled off the assembly line. Eight years later, she became the Guinness book holder for the best-selling car on the planet. Today Corolla is presented in the 11th generation and the concern is not going to stop there. Corolla has a wide range of engines with a wide variety of technical data: from barely working to the amazing 240-horsepower copies of the 4A-GE TRD line with a volume of 1.6 liters. In this article, you will be able to find information about what kind of oil to pour into them and how much.

The model began to truly conquer the domestic market in the 90s with the release of the seventh generation (1991). Then only carburetor 1.3-liter modifications of the previous generation were imported into Russia. Corolla E110 debuted in 1995 and outwardly it completely repeated the E100. The engines have not changed the volume - these are the same engines in the range of 1.3-2.2 liters, producing 70-165 hp. The ninth generation since 2000 was already based on the Toyota Vista platform and differed from its predecessor in the modified front end of the car. In terms of engines, the top was now occupied by a 192-horsepower unit of 1.8 liters.

Corolla E140 is the next generation of the super popular golf class car, which entered the assembly line in 2006. Russian drivers were able to choose between the 1.4- and 1.6-liter gasoline engines with 97 and 124 hp, while the more powerful equipment was paired with a robotic transmission. The 10th generation restyling has expanded the line of installations with a 1.3-liter version with 101 hp. (there were also diesel modifications on the market for 1.4, 2.0 and 2.2 liters). And since 2012, Toyota has been releasing the Corolla in the E170 generation, the 11th since the start of the model's production. The elegant car has become even more practical and reliable, while maintaining the legendary efficiency and variety of trim levels.

Generation E100 (1991 - 1998)

Toyota 5A-F / FE / FHE 1.5 liter engine. 105 h.p.

, 15W-40, 20W-50

Toyota 4A-C / L / LC / ELU / F / FE / FHE / GE / GZE 1.6 liter engine. 100, 105, 115 hp

What kind of engine oil is filled from the factory (original): Synthetics 5W30
Oil consumption per 1000 km: up to 1000 ml.
When to change the oil: 5000-10000

Toyota 7A-FE 1.8 liter engine. 105, 115, 118 hp

What kind of engine oil is filled from the factory (original): Synthetics 5W30
Oil types (viscosity): 5W-30, 10W-30, 15W-40, 20W-50
Oil consumption per 1000 km: up to 1000 ml.
When to change the oil: 5000-10000

Generation E110 (1995 - 2002)

Toyota 5A-F / FE / FHE 1.5 liter engine. 100 h.p.

What kind of engine oil is filled from the factory (original): Synthetics 5W30
Oil types (viscosity): 5W-30, 10W-30, 15W-40, 20W-50
How many liters of oil in the engine (total): 3.0 liters.
Oil consumption per 1000 km: up to 1000 ml.
When to change the oil: 5000-10000

Toyota 4A-C / L / LC / ELU / F / FE / FHE / GE / GZE 1.6 engine 110, 115 hp

What kind of engine oil is filled from the factory (original): Synthetics 5W30
Oil types (viscosity): 5W-30, 10W-30, 15W-40, 20W-50
How many liters of oil in the engine (total): 3.0 (4A-FE, 4A-GE), 3.2 (4A-L / LC / F), 3.3 (4A-FE), 3.7 (4A-GE / GEL)
Oil consumption per 1000 km: up to 1000 ml.
When to change the oil: 5000-10000

Toyota 7A-FE 1.8 liter engine. 110 h.p.

What kind of engine oil is filled from the factory (original): Synthetics 5W30
Oil types (viscosity): 5W-30, 10W-30, 15W-40, 20W-50
How many liters of oil in the engine (total): 3.7 liters.
Oil consumption per 1000 km: up to 1000 ml.
When to change the oil: 5000-10000

Toyota 1ZZ-FE / FED / FBE 1.8 liter engine. 120, 125 hp

What kind of engine oil is filled from the factory (original): Synthetics 5W30
Oil types (viscosity): 5W-30, 10W-30
How many liters of oil in the engine (total): 3.7 liters.
Oil consumption per 1000 km: up to 1000 ml.
When to change the oil: 5000-10000

Generation E120 (2000 - 2006)

What kind of engine oil is filled from the factory (original): Synthetics 5W30
Oil types (viscosity): 5W-30, 10W-30
How many liters of oil in the engine (total): 3.7 liters.
Oil consumption per 1000 km: up to 1000 ml.
When to change the oil: 5000-10000

Toyota 1NZ-FE / FXE 1.5 liter engine. 105, 110 hp

What kind of engine oil is filled from the factory (original): Synthetics 5W30
Oil types (viscosity): 5W-30, 10W-30
How many liters of oil in the engine (total): 3.7 liters.
Oil consumption per 1000 km: up to 1000 ml.
When to change the oil: 5000-10000

Toyota 3ZZ-FE 1.6 liter engine. 110 h.p.

What kind of engine oil is filled from the factory (original): Synthetics 5W30
Oil types (viscosity): 5W-30, 10W-30
How many liters of oil in the engine (total): 3.7 liters.
Oil consumption per 1000 km: up to 1000 ml.
When to change the oil: 5000-10000

Toyota 1ZZ-FE / FED / FBE 1.8 liter engine. 125, 130, 132, 136 HP

What kind of engine oil is filled from the factory (original): Synthetics 5W30
Oil types (viscosity): 5W-30, 10W-30
How many liters of oil in the engine (total): 3.7 liters.
Oil consumption per 1000 km: up to 1000 ml.
When to change the oil: 5000-10000

Generation E140 (2006 - 2013)

Toyota 2NZ-FE 1.3 liter engine. 85 h.p.

What kind of engine oil is filled from the factory (original): Synthetics 5W30
Oil types (viscosity): 5W-30, 10W-30
How many liters of oil in the engine (total): 3.7 liters.
Oil consumption per 1000 km: up to 1000 ml.
When to change the oil: 5000-10000

Toyota 4ZZ-FE 1.4 liter engine. 97 h.p.

What kind of engine oil is filled from the factory (original): Synthetics 5W30
Oil types (viscosity): 5W-30, 10W-30
How many liters of oil in the engine (total): 3.7 liters.
Oil consumption per 1000 km: up to 1000 ml.
When to change the oil: 5000-10000

Toyota 1NZ-FE / FXE 1.5 liter engine. 110 h.p.

What kind of engine oil is filled from the factory (original): Synthetics 5W30
Oil types (viscosity): 5W-30, 10W-30
How many liters of oil in the engine (total): 3.7 liters.
Oil consumption per 1000 km: up to 1000 ml.
When to change the oil: 5000-10000

Toyota 1ZR-FE / FAE 1.6 liter engine. 124 h.p.

Oil consumption per 1000 km: up to 1000 ml.
When to change the oil: 5000-10000

Toyota 2ZR-FE / FAE / FXE 1.8 liter engine. 136 h.p.

What kind of engine oil is filled from the factory (original): Synthetics 5W20
Oil types (viscosity): 0W-20, 5W-20, 5W-30, 10W-30
Oil consumption per 1000 km: up to 1000 ml.
When to change the oil: 5000-10000

Toyota 1ZZ-FE / FED / FBE 1.8 liter engine. 140 h.p.

What kind of engine oil is filled from the factory (original): Synthetics 5W30
Oil types (viscosity): 5W-30, 10W-30
How many liters of oil in the engine (total): 3.7 liters.
Oil consumption per 1000 km: up to 1000 ml.
When to change the oil: 5000-10000

Toyota 3ZR-FE / FAE / FBE 2.0 liter engine 145 h.p.

What kind of engine oil is filled from the factory (original): Synthetics 5W20
Oil types (viscosity): 0W-20, 5W-20, 5W-30, 10W-30
How many liters of oil in the engine (total): 4.2 liters.
Oil consumption per 1000 km: up to 1000 ml.
When to change the oil: 5000-10000

Generation E170 (2012 - present)

Toyota 1ZR-FE / FAE 1.6 liter engine. 122 h.p.

What kind of engine oil is filled from the factory (original): Synthetics 5W30
Oil types (viscosity): 0W-20, 5W-20, 5W-30, 10W-30
How many liters of oil in the engine (total): 4.7 liters.
Oil consumption per 1000 km: up to 1000 ml.
When to change the oil: 5000-10000

Toyota 2ZR-FE / FAE / FXE 1.8 liter engine. 132, 140 hp

What kind of engine oil is filled from the factory (original): Synthetics 5W20
Oil types (viscosity): 0W-20, 5W-20, 5W-30, 10W-30
How many liters of oil in the engine (total): 4.2 liters.
Oil consumption per 1000 km: up to 1000 ml.
When to change the oil: 5000-10000

Cars from Japanese manufacturers have long been known for their reliability and unpretentiousness. Toyota Corolla can be confidently called one of the most popular cars. The history of the model lasts more than half a century; today, eleven generations of Toyota Corolla are known. The impeccable technological qualities of the car, as well as the excellent value for money, win over tens of thousands of motorists every year.

Today, statistics show that over the entire production period, about 50 million cars have been sold. The question arises: is this car really good, and what is the real resource of the Toyota Corolla engine?

Line of power units

Japanese engines loudly declared themselves back in the 90s of the last century. For engineers toyota managed at that time to create really outstanding design, which was distinguished by its small size and great power. Among other things, the power units of the Toyota Corolla are known for low fuel consumption and high torque. The base is the 1.4-liter 4ZZ-FE engine with a chain drive. It shares a lot with the 1.6-liter 3ZZ-FE engine. The manufacturer decided to install a smaller crankshaft and change the piston stroke, thus, it turned out structurally similar, but less powerful engine with a volume of 1.4 liters.

The most popular and demanded is the 1.6 1ZR FE power unit. Structurally, it consists of four cylinders and sixteen valves. This setting determines the presence of a chain drive, which has a positive effect on the engine resource. It was mainly installed under the hood of Toyota Corolla E150, E160. Technologically, a perfect power unit has turned out, which was designed taking into account previous experience, but already for more modern technologies... The engine gas distribution system is equipped with vVT systemI, which contributes to the highest quality motor power.

How long do engines run on Toyota Corolla

The first 250 thousand kilometers, as a rule, both engines pass without any significant problems. The main thing is to replace the engine oil on time. The manufacturer recommends changing the lubricant every 10 thousand kilometers. But, as practice shows, to preserve performance characteristics vehicle and engine life extension planned replacement best of all every 7.5-8 thousand km.

Common malfunctions of 1ZZ, 3ZZ, 4ZZ-FE motors:

Increased oil consumption. It is observed mainly among power plants manufactured before 2002. The problem lies in the oil scraper rings, which are best replaced with a 2005 model or newer. Oil is added to the level, after which the problem disappears;
Increased noise, knocking of the 1ZZ engine. It appears at the turn of the first 150 thousand km, and is solved by replacing the timing chain. Valves on Toyota Corolla engines knock on rare occasions, and do not need frequent adjustment;
Instability of rpm is solved by flushing throttle and idle valve;
On some engines, vibration often occurs, it is not always possible to eliminate it. You need to check the rear engine mount.

Compared in terms of resource power plants of different generations, then, of course, engines of the 3ZZ, 4ZZ series significantly outperform the older 1ZZ modification. They lend themselves to boring and sleeve fitting, which is a definite plus. But 1ZZ motors are often denied service, they are practically not amenable to major repairs, or carrying out such work turns out to be unprofitable. It is for this reason that many domestic motorists dislike 1ZZ power plants.

Owner reviews

In Russia, you can often find a Toyota Corolla with a VVT 1 system. This modification was assembled taking into account the climatic and other features of the region. It also has four cylinders and is equipped with injection system nutrition. An indisputable advantage is the perfectly adjusted valve timing. Thanks to this, the engine turned out to be quite economical without losing its factory dynamic characteristics. Japanese engineers claim that their engines run at least 250,000 kilometers without any problems, is this really so? Reviews of the owners will tell.

Engine 1.4

Maxim, Moscow. For a long time I drove a Toyota Corolla e150 2008 with a 1.4 liter engine paired with mechanical box... I can say with confidence that in most cases mechanical impact engines of this series require 200-250 thousand kilometers when passing. Much depends on the conditions in which the car was operated. First of all, the oil scraper rings and caps wear out, and the timing chain also requires replacement after 120-150 thousand km, as luck would have it. This is not a major overhaul, but, in fact, an engine bulkhead. Since the sealing of the cylinders remains at this level at a good level.
Igor, Krasnodar. Has been driving a Toyota Corolla since 2011. The mileage is already 220 thousand kilometers, the engine is still vigorous, the car runs well on the highway, I change the oil after 5-6 thousand km, pour only synthetics recommended by the manufacturer. I adhere to a calm manner of driving, I am not a reckless driver around the city, with such an attitude to the car, I think that it will go at least 350-400 thousand km, and then we'll see what to do.
Vyacheslav, Tambov. I have a restyled toyota version Corolla e150 with 1.4 l 4ZZ-FE engine. During operation, I realized one thing that timely oil change plays an important role. Subject to timely maintenance, the engine will run for a long time. I always fill in synthetics and practically do not deviate from the manufacturer's recommendations. The mileage is 280,000 km, which is definitely a good indicator. During this time, I changed the timing chain twice, the fuel consumption is adequate, in rare cases it exceeds the official norm. In general, I am satisfied with the car, the dynamics are also at a good level after so much time.
Vasily, Rostov. The only drawback of the Toyota engine is the lack of the ability to conduct overhaul... I covered 300,000 kilometers in my Toyota Corolla e160 with a 1.4 engine, after which I decided to sell. The engine was considered to be in perfect condition, but I decided to change the car, as I wanted a new one. I heard that there are still craftsmen and that worn-out engines are being handcrafted, so there should be no problems here. You need to monitor the condition power unit and promptly respond to any malfunctions. Then 300-350 thousand Toyota Corolla will definitely pass.

Many car owners often think about , which oil is better to pour into the Corolla. The options can be varied, because in addition to original lubricants, there is a good selection of analogues of various quality and cost. Before buying, you need to understand the intricacies of the choice.

What kind of lubricant might work?

In the car service book, you can find information about which oil is suitable for the E150 engine or another model that is in your ownership. If you do not have a service book, pick up suitable lubricant you can use the table that many motor oil sellers can offer.

Thanks to the catalog, you can find out exactly whether your car needs synthetics or mineral fluid, what viscosity is right for it, and how much oil you need to fill in your Toyota.

Genuine products are usually recommended by the factory because they are optimal for the engine, but such products are quite expensive, and if you buy them in an unverified place, there is a high risk of acquiring a fake. It is not at all necessary to buy only original oil, especially if you have an older car. It is enough to choose a lubricant of a similar viscosity and other parameters from any manufacturer you trust and whose product price suits you.

For example, for the 2008 Toyota E 150, the service book recommends pouring synthetic products, the viscosity of which may vary. Most drivers fill in 10W-30 universal fluid, besides it, motor oil with a viscosity of 5W-30, -20, as well as a rather rare 0W-20, is suitable.

Gasoline engine 1.6, according to aPI specifications, requires SL, SM engine oil. Products with this marking are also suitable for cars manufactured in 2001, 2003, 2006, 2010. However, it should be noted that this marking is inherent only in older generations of greases. For cars of 2012, 2013, 2014, 2015, fluids of the same viscosity, but with the SN marking, are applicable. This is a newer labeling.

If your car was produced from 2002 to 2011, and the old type greases are not on sale in your region, you can safely purchase products with the SN marking. For example, the manufacturer recommends 5W-30 SN oil for the year of manufacture. For gasoline engines, the bottle must be labeled PI.

There are Sprinter fluids, they are designed for small vans, sports carsfit for the 2013 Toyota Corolla. The difference between such oils from conventional oils lies in the improved formula, due to which the engine, under increased loads, is better cooled, protected from rust and other unpleasant phenomena associated with the operation of the car. This oil is recommended for the turbocharged Toyota Corolla.

If the engine was produced before 2013, the choice of oil should be focused on high anti-corrosion and anti-wear properties, since old power units have thinner walls and need special protection. Products labeled SL with an improved formula are suitable. Energy saving products can be poured in, they are well suited for the 110 generation.

Possible problems with high consumption of lubricants

The engine oil level should be checked regularly. Ideally, the mark should be in the middle. Consumption tolerances should not exceed a liter per 10 thousand km for a used car. If the car eats grease, you need to pay attention to the condition of its power unit, most likely, it needs repair.

For example, if the oil pressure sensor is constantly on, it does not matter if you have generation 110 or another model, it will not be superfluous to check not only the level, but also the sensor itself. If you find that the car eats oil, for example, it takes about a liter for 1 thousand km, it's time to repair the engine. Most often, Toyota eats if the rings are worn out and valve stem seals: by replacing them, you can get rid of the problem.

It happens that the oil pressure is normal, the rings are new, but the machine still eats large quantities of lubricant. In this case, you need to check the oil pump, especially if you have previously used a low-quality motor product. In this case, it will be necessary not only to replace the defective part, but also complete replacement higher quality oils.

It is worth paying attention to the fact that a serviceable car can eat oil if it low quality and its viscosity is insufficient: such a substance is simply squeezed out through various slots, for example, it can flow from under the filling cap.

That is why, when deciding which oil to pour, it is not worth saving at all by purchasing cheap products of dubious quality. Repairing and replacing the fluid with a suitable one will be much more expensive.

How do I change the lubricant myself?

Having decided what kind of oil you need to fill in, you have to think about whether to change it in a car service or do it yourself. Many sellers mark up liquids, but offer free replacements. If you do not want to waste time or do not have suitable conditions for self replacement, then you can use the services of a car service, where they can also tell you how much oil you need. If the products are offered for bottling, you will not have to overpay for extra liters. It is worth paying attention to the fact that together with the replacement of the lubricant, the oil filter is also changed. You should buy it right away.

If you want to change fluids yourself, you can do it in a garage. To do this, you need a pit or overpass. Before replacing the car, you need to warm up, for this it is enough to drive a few blocks. Then place the Toyota over the pit. Make sure that the car is not tilted. It is better to work with gloves, as the drained liquid will be hot. Prepare in advance a container of suitable volume into which you will pour the waste liquid, unscrew drain plug: it is located on the crankcase. Wait a few minutes for all the grease to drain, then replace the oil filter.

The oil filter and oil are changed every 10,000 km, the replacement date may vary slightly depending on specific operating conditions. This article provides an example of an oil change for Toyota Corolla cars from 2010. From 2006 to 2010, all operations are similar, except that the design uses a classic oil filter in a metal housing instead of a filter insert.

To remove and install the oil filter on toyota car Corolla, you will need the following tool: a 14 mm socket, a key for the cap of the oil insert code 09228-06501 or a chain or soft puller with a strap tape oil filter, funnel, screwdriver.

Using a screwdriver, remove the rubber plugs from their seats in the engine protection

Unscrew the oil filler plug in the engine compartment

Unscrew the oil drain plug from the crankcase with a 14 mm wrench

We drain the oil to a volume of at least 4.2 liters, this is exactly the volume of oil in the crankcase toyota engine Corolla 2006-2012 year of manufacture 1.6 liter engine 1 ZR-FE

Unscrew the cap with a special key 09228-06501. The cap can also be unscrewed with a strap wrench or a chain wrench. When unscrewing with a chain wrench, it is necessary to wrap the chain in a strip of cloth so as not to damage or leave marks on the plastic cap. I shot it that way.

We take out the cap with the filter element.

We take out the filter element

Replaces the installed original filter element Toyota code 04152-37010 installed analogue of Knecht (Mahle Filter) OX 416 D1

Placement of the filter insert. It is worth noting that the metal cartridge is spring loaded, guaranteeing the pressure of the replaceable cartridge to the sealing surfaces

View of the filter insert hood. Inscriptions: twist clockwise, unscrew counterclockwise. tightening torque 25 N * m, that is, 2.55 kg per meter.

Six threads, i.e. six turns until fully tightened. A rubber O-ring (circular cross-section) is installed on the cap. If the ring is in good condition without scoring, gouges, then there is no particular point in changing it. The new filter is supplied with a new ring. Replace if necessary, lubricate with oil.

We install a new filter element.

Fill in the oil. The oil is absorbed into the porous surface, so add more oil after it has been absorbed. This is necessary so that in the first seconds of starting the engine, oil immediately begins to flow to the valves through the cardboard, and does not stay in the chamber of the replaceable insert.

We install the hood with the filter insert in place.

Pay attention to the location of the hood. He must turn to his position before removing. On the cap there are risks between which the pointer should be located - seen in the photo opposite the number 10 on the tape measure.

Fill in oil through the oil filler neck. We wrap the cork.

The oil should be between the level marks. After the first drive, check the engine oil level and top up if necessary.
I also wanted to highlight the option of express oil change in the car engine, more detailed information, about the technology of operations and the features of such a replacement, you can find in the article "

When choosing a car oil for the summer or winter, it is important to purchase a lubricant that has an optimal viscosity suitable for the engine. To simplify the selection of lubricant, you can use the information set forth in the car operating instructions. These instructions describe the parameters of the recommended engine oil for Toyota Corolla.

1995 model

The selection of engine oil is carried out taking into account the type of car engine.

Gasoline power units

Scheme 1. Recommended density of car oil for models up to 1995.

According to this scheme, for the winter, when the air temperature is below +8 0 C, it is better to use motor fluids with a viscosity parameter of 5w-30. The use of lubricants with a viscosity of 10w-30, 15w-40 or 20w-50 is advisable at a temperature indicator above -18 0 С, at a lower temperature conditions the use of these oils will lead to a deteriorated engine start and an increase in consumption fuel mixture.

Scheme 2. Dependence of viscosity motor fluid the temperature of the region in which the machine is operated (models equipped with gasoline engines since 1995 release).

* - model 4A-GE.

** - except for the 4A-GE model.

10w-30 is poured at temperatures above -20 0 С;
5w-30 is poured into the 4A-GE model if the thermometer is below +10 0 С;
in a wide temperature range, from -30 0 С (or less) to +40 0 С (and more), 5w-30 is used (except for the 4A-GE model).

Diesel car engines

According to the manual for Toyota Corolla, it is recommended to use the oil type CD, CE or CF according to API classification. The viscosity of lubricating fluids for models up to 1995 is selected according to scheme 1, and for complete sets from 1995, the selection of viscosity parameters is performed according to scheme 3.

Scheme 3. Recommended viscosity for models from 1995 release.

Based on the data of Scheme 2, at temperatures above -20 0 С, 10w-30 is used. 5w-30 oils are used in regions with air temperatures below +10 0 С.

Refueling volumes

The volume of engine oil between the “maximum” and “minimum” marks on the dipstick is approximately 1 liter. Refueling tanks for Toyota Corolla:

Engines 2E and 3E:

2.7 l with oil filter;
2.5 l excluding oil filter.

4E-FE or 5E-FE motors:

2.8 l with filter change;
2.6 liters without changing the oil filter.

Automatic engines 5A-FE, 4A-FE (2WD):

3.0 L including oil filter;
2.8 l without changing the oil filter.

Power units 7A-FE:

3.7 l with oil filter;
3.5 without replacing the filter unit.

Engines 4A-GE:

3.0 l with filter change;
2.8 l without changing the oil filter.

Power units 2C (up to 1994):

4.7 L with oil filter;
4.2 l without oil filter.

2C (from 1994 to 1995):

4.3 l with filter change;
3.6 l excluding oil filter.

Power units 2C (since 1995 2WD):

4.1 l with oil filter change;
3.4 liters without changing the oil filter.

2C engines (since 1995 4WD):

4.4 L with oil filter;
3.7 l without oil filter.

Motors 3C-E (2WD):

5.1 L with oil filter;
4.4 l without filter device.

Powertrains 3C-E (4WD):

4.9 with oil filter change;
4.2 liters without changing the oil filter.

Toyota Corolla E110, E111 1997-2002 years of release

Car photo

According to the operating instructions for the machine, the recommended engine oil for Toyota Corolla is selected by the type of engine. For 2E 1.3l power units, you need to use auto oil brands CD, CE or CF in accordance with the API system or lubricants more high class quality. The recommended grease thickness is shown in diagram 4.

Scheme 4. Influence of air temperature on the selection of the viscosity of the motor fluid for engines 2E 1,3l.

In accordance with Scheme 4, it is recommended to use 15w-40, 20w-40 and 20w-50 lubricants if the temperature outside the car is above -9 0 C. With a thermometer reading above -23.5 0 C it is worth using fluids 10w-30, 10w -40 or 10w-50. If the temperature is less than +8 0 С, then it is recommended to fill in 5w-30.

In the case of 4E-FE 1.3L power units, it is recommended to use the oil type SG, SF or higher according to API requirements. The viscosity of the engine fluid is selected according to scheme 5.

Scheme 5. Recommended density of engine fluid for car engines 4E-FE 1,3l.

According to scheme 5, at temperatures below +8 0 С, 5w-30 is poured. Auto oils 10w-30 are used when the temperature indicator is above -18 0 С, and 15w-40 or 20w-50 are poured if the temperature is above 12.5 0 С.

For 4ZZ-FE 1.4 liter Toyota Corolla engines, use oils of at least SJ class according to the API system. You can also use energy-saving motor oils with an inscription on the canister “Energy Conserving”. The density of the recommended car oil is selected according to scheme 6.

Scheme 6. Recommended density of engine fluid for engines 4ZZ-FE 1.4l.

The manufacturer recommends the use of 5w-30 greases over a wide temperature range. If the air temperature is higher than -18 0 С, then the manufacturer recommended pouring thicker oils 10w-30, 15w-40 or 20w-50.

Refueling volumes

The volume of engine fluid required when replacing is:

Car engines 2E 1.3l and 4E-FE 1.3l:

3.2 l with oil filter change;
2.9 liters excluding oil filter.

4ZZ-FE 1.4l motors:

3.7 l with oil filter change;
3.5 excluding oil filter.

Toyota Corolla Е120, Е130 2001-2007 years of release

2006 model

The manufacturer recommended for Toyota Corolla to use original Toyota Genuine Motor Oil lubricants. The car manufacturer also allows the use of alternative oils of appropriate quality. Engine oil requirements:

All-season engine fluids SL or SM according to API classification with a viscosity of 20w-50 or 15w-40;
Automotive oils with a viscosity of 10w-50 or 15w-40 class SL or SM according to API classification with the inscription "Energy Conserving", which means energy saving.
ILSAC certified multipurpose lubricants.

For the selection of viscosity motor lubricant use scheme 7.

Scheme 7. Recommended viscosity of motor fluid.

According to scheme 7 the best choice to save the fuel mixture and start the engine well in cold weather, there are 5w-30 motor oils. At temperatures above -18 0 С, the manufacturer recommends using motor oils with viscosity indicators 10w-30, 15w-40 or 20w-50.

Refueling volumes

The approximate amount of engine fluid needed to raise the level between the lower and full level on the dipstick is 1.5 liters. The volume of engine oil required when changing is 4.2 liters including the oil filter and 4.0 liters without changing the oil filter.

Toyota Corolla E140, E150 2006-2013 model years

2008 model

Gasoline power units

The recommended engine oil for Toyota Corolla is selected taking into account the type of car engine. For gasoline engines it is recommended to use motor oils with a viscosity of 15w-40 or 20w-50 corresponding to the category SL or SM according to the API classification.

For 4ZZ-FE engines, oils must comply with SAE 10w-30 or 5w-30, also be ILSAC certified and meet SL "Energy Conserving" or SM "Energy Conserving". The selection of viscosity is carried out according to scheme 8.

Scheme 8. Recommended viscosity for Toyota Corolla cars with 4ZZ-FE, 1ND-TV and 1AD-FTV engines (models ADE150L-AEFNYW and ADE150R-AEFNYW * 1).

Fuel economy and good engine start in cold weather are facilitated by the use of motor oils with a viscosity of 5w-30. For regions where the air temperature outside the car is above -18 0 C, it is permissible to fill in 10w-30, 15w-40 or 20w-50 greases. In the absence of 5w-30, it is permissible to fill in 10w-30, but with next replacement it needs to be changed to 5w-30.

viscosity 10w-30, 5w-30, 5w-20 or 0w-20;
oil class SL "Energy Conserving" or SM "Energy Conserving";
iLSAC certified universal greases.

Choosing the viscosity of the grease for the 1ZR-FE engine, use Scheme 9.

Scheme 9. Recommended viscosity for 1ZR-FE motors.

According to Scheme 9, the best option There are 0w-20 greases to save the fuel mixture and to start the car engine well in cold weather. If this car oil is not available, then a 5w-30 smear is allowed, but the next time it is replaced, it must be changed to 0w-20.

Diesel car engines

For models 1ND-TV, ADE150L-AEFNYW and ADE150R-AEFNYW *, it is necessary to use lubricants corresponding to class B1 according to the ACEA system and type aPI oils CF-4 or CF. It is also possible to apply the CE and CD classes in accordance with API regulations. The viscosity of the motor oil is selected according to scheme 9.

In the case of models 1AD-FTV (model ADE150L-AEFNXW *), it is necessary to fill in the oil class C2 according to ACEA, in the absence of the specified lubricants, it is permissible to use ACEA B1. Scheme 10 is used to select the viscosity of the lubricant.

Scheme 10. Recommended viscosity of motor lubricant for 1AD-FTV engines (model ADE150L-AEFNXW *).

(*) - the model code is indicated on the manufacturer's label.

Refueling volumes

Refueling tanks for Toyota Corolla:

4ZZ-FE car engines:

4.2 l with oil filter;
4.0 L without changing the oil filter.

1ZR-FE motors:

4.2 liters if you take into account the filter;
3.9 liters excluding oil filter.

Power units 1ND-TV:

4.3 l if you take into account the filter;
3.8 L without oil filter.

1AD-FTV engines:

6.3 l with oil filter change;
5.9 liters without changing the oil filter.

The maximum oil consumption is 1l / 1 thousand km. The approximate amount of lubricant required for its level to be midway between the upper and lower marks on the dipstick is:

1.5 l for 4ZZ-FE and 1ZR-FE engines;
1.8 l for 1ND-TV motors;
1.7 liters in the case of 1AD-FTV power units.

Toyota Corolla E160, E170 from 2012 release

2014 model

Gasoline car engines

Manufacturer's requirements for engine oil for Toyota Corolla:

original engine fluids "Toyota Genuine Motor Oil" or other motor oils of appropriate quality (possibly with tolerances on the canister);
the viscosity of the motor oil is 0w-20, 5w-30, 10w-30 and the lubricant class SL "Energy Conserving" or SM "Energy Conserving";
universal motor liquid ILSAC with viscosity 15w-40;
universal motor fluids of class SL, SN, SM according to API classification.

The selection of the viscosity is performed using Scheme 11.

Scheme 11. Recommended viscosity of motor fluid.

According to scheme 11, it is preferable to use 0w-20 motor oils, if they are absent, it is permissible to fill in 0w-30, which must be changed to 0w-20 during subsequent replacement. When using oils 10w-30 or 15w-40 in cold weather (temperatures below -18 0 С), an increase in fuel consumption and deterioration in engine start-up are possible.

Diesel engines

Motor fluid requirements:

branded auto oils "Toyota Genuine Motor Oil" or alternative lubricants of appropriate quality;
grease class C2 according to ACEA.

Choosing the viscosity, use Scheme 12.

Scheme 12. dependence of the viscosity of the motor fluid on the air temperature.

According to scheme 12, it is preferable to use 0w-30 motor oils, they help to reduce fuel consumption. In the absence of the specified motor oil, it is permissible to pour 5w-30 greases, which, when subsequently replaced, are changed to 0w-30.

Refueling volumes

Volumes required when replacing a car oil:

1NR-FE motors:

3.4 l if you take into account the filter;
3.2 l without oil filter.

1ZR-FE, 2ZR-FE and 1ZR-FAE engines:

4.2 l with filter;
3.9 L without oil filter.

1ND-TV car engines (for Turkey):

3.9 l with oil filter;
3.5 l without filter;

1ND-TV (except Turkey):

3.7 L with oil filter;
3.3 l without oil filter.

Conclusion

The consumption of motor lubricant in an engine depends on the quality and viscosity of the lubricant. Recommended engine oil for Toyota Corolla has optimal parameters, protects the motor from overheating in the heat and starts the power unit without warming up in cold weather. When operating a car, keep in mind that even the recommended car oil can liquefy, therefore, with frequent use of the car in extreme conditions, it is worth making a more frequent change lubricating fluidthan specified in the regulations.